My device has PIC16F1713 MCU and I use MPLAB X IDEv3.05 to compile the tinybld16F1713_16MHz_int_19200bd.asm and load this bootloader.
I open the Tiny Multi Bootloader+(v0.10.0) on my old laptop(Win7), click"Check Device", Message window shows "Found: 16F w/4Kw flash & 0B EEROM(Blk32), click"Write device", can write our application firwmare in.
But , if I open Tiny Multi Bootloader+(v0.10.0) on my new laptop(Win10), click"Check Device", showed me "Open COM14 serial port at 19200bd, Error: No Device Detected!!!"
And then, I went to your website and dowloaded the Tiny Multi Bootloader+(v0.11.2) , the problem is still here.
Did someone ever meet the same problem? Some ideas how to fix it and let the Tiny Multi Bootloader+ work on Window10?
Thanks a lot.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi There,
My device has PIC16F1713 MCU and I use MPLAB X IDEv3.05 to compile the tinybld16F1713_16MHz_int_19200bd.asm and load this bootloader.
I open the Tiny Multi Bootloader+(v0.10.0) on my old laptop(Win7), click"Check Device", Message window shows "Found: 16F w/4Kw flash & 0B EEROM(Blk32), click"Write device", can write our application firwmare in.
But , if I open Tiny Multi Bootloader+(v0.10.0) on my new laptop(Win10), click"Check Device", showed me "Open COM14 serial port at 19200bd, Error: No Device Detected!!!"
And then, I went to your website and dowloaded the Tiny Multi Bootloader+(v0.11.2) , the problem is still here.
Did someone ever meet the same problem? Some ideas how to fix it and let the Tiny Multi Bootloader+ work on Window10?
Thanks a lot.
I will have a look tonite. London time :-)