I've added in the PC software a new tab: "Firmwares".
In this tab, you can see all important infos about devices' bootloader firmwares, like the clock (internal or external, frequency), the default baud rate, RX and TX pins, and bootloader's hex file.
You can also directly flash your PIC device (only PIC) directly from TinyMultiBootloader+. Usable Microchip's programmers are: Pickit 3, ICD3, Real Ice, PM3 and PKOB.
But to do so, "fimwares.ini" file (strored in the "firmwares" folder) should be populated with the devices' bootloaders informations. I've done it only for a very few devices (the ones I use) as I don't want to spend too much time for things I won't use at all.
So, I attach the initial "firmwares.ini" file in this post and if you add informations for a device, please share it by adding them to the lastest "firmwares.ini" file of this post. Thanks in davance for all the contributors.
Hello,
I've added in the PC software a new tab: "Firmwares".
In this tab, you can see all important infos about devices' bootloader firmwares, like the clock (internal or external, frequency), the default baud rate, RX and TX pins, and bootloader's hex file.
You can also directly flash your PIC device (only PIC) directly from TinyMultiBootloader+. Usable Microchip's programmers are: Pickit 3, ICD3, Real Ice, PM3 and PKOB.
But to do so, "fimwares.ini" file (strored in the "firmwares" folder) should be populated with the devices' bootloaders informations. I've done it only for a very few devices (the ones I use) as I don't want to spend too much time for things I won't use at all.
So, I attach the initial "firmwares.ini" file in this post and if you add informations for a device, please share it by adding them to the lastest "firmwares.ini" file of this post. Thanks in davance for all the contributors.
Best regards,
Edorul
Last edit: edorul 2016-05-17
Dear Edorul.
Thank you very much for the new version.
Best regards,
Dan