The option mentioned in the subject is important and visibility should be enabled in the form. If the software starts sending 0xC1 PIC will not respond correctly if there is no delay between rts = true and rts = false. With 12f1840 I found 500 and 100 to be ideal.
No code change is required to fix it as only the form need to be modified with visible propert enabled for the edit box.
Regards,
Sunish
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The option mentioned in the subject is important and visibility should be enabled in the form. If the software starts sending 0xC1 PIC will not respond correctly if there is no delay between rts = true and rts = false. With 12f1840 I found 500 and 100 to be ideal.
No code change is required to fix it as only the form need to be modified with visible propert enabled for the edit box.
Regards,
Sunish
Hello Sunish,
Thanks for the report! I'll enable it (again) in the next release.
Best regards,
Edorul
Edorul,
Some typos to be fixed in the messages too...
sucessfully -> successfully
Transfering -> Transferring
Transfert HEX successfull :-)
-> Transferring HEX successful :-)
Regards,
Sunish
Hello Sunish,
Well noted! If you see other mistakes, please tell me :-)
Thanks!
Best regards,
Edorul