I work with Tinn-R since 2008. For each update of Tinn-R or new installation on different workstations (with different OS) ".trpath" problem is always appeared. Generally, I've solved the problem but this time is different. After downloading the last version of Tinn-R 18.104.22.168, I red the quick guide where there was the indication of the fixed ".trpath" problem, but unlikely not for me. I tried different solutions but without success.
My OS is win 8 (64 bit).
I would appreciate greatly any suggestions.
Thanks at all
I experience exactly the same problem as Massimo.
New win 8 64 bit system. Fresh R 3.0.3 install (also 64 bit). Fresh Tinn-R 22.214.171.124 install. Indeed in the past (previous computer) the .trPaths problem was solved by editting Rprofile.site, but I am not sure how to approach the issue now.
Any help is much appreciated!
Solved (for me). After spending another hour trying to find out what could be causing the problem, the solution appeared to be very straightforward: simply plug in the networkcable. The TinnRComm package is then automatically installed, resolving the .trPaths issue.
Log in to post a comment.
Sign up for the SourceForge newsletter:
You seem to have CSS turned off.
Please don't fill out this field.