Thread: [Thinstation-portuguese] Thinclient boot PXE Ts 2008 R2
Brought to you by:
doncuppjr
From: Myke L. <cm...@gm...> - 2011-02-21 11:07:17
|
bom dia pessoal, eu já desisti, não dou conta, estou disposto a pagar pra alguem me ajudar ou fazer um passo-a-passo pra eu conseguir colocar os thinclients aqui pra dar boot via PXE e conectar no ts 2008 r2. desde já agradeço. |
From: Daian C. <da...@op...> - 2011-02-21 11:53:51
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Bom dia Myke, Em que parte voce esta tendo problemas , os clientes iniciam ?? aparece algum erro ??? Não tenho nenhum passo a passo, mas acho que no site tem algumas documentações. Mass, segue uma rápida descrição do processo . . . * - Ter um linux instalado em uma maquina (que vai servir de server) * - Baixar o source do thinstation em http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download * - Configurar as opções no arquivo build.conf e thinstation.conf ___ Isso pode ser bem complexo dependendo da solução que queira disponibilizar para os clientes, porem, existem diversos exemplos de configuração no proprio arquivo. BUILD.CONF - este arquivo contem as configurações de kernel e sistema operacional que sera disponibilizado para os usuários. THINSTATION.CONF - este arquivo, contem informações e configurações sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: rdesktop, Xnext, ssh, telnet e afins) * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que voce possa adicionar o nome/endereço do servidor de tftp e os parâmetros para o PXE. Depois disso, as estações jah estarão habilitadas a iniciar na rede, lembrando que ajustes podem ser necessários para ambientes mais complexos, no seu caso, para iniciar somente o rdesktop, em teoria é tranquilo. Qualquer coisa posta os erros aqui na lista, e não desiste não, lembre-se . . . o caminho e cheio de pedras, e se voce não tirá-las da sua frente, sempre terá o dedão machucado ;-) . []s Em 21-02-2011 08:07, Myke Lima escreveu: > bom dia pessoal, > > eu já desisti, não dou conta, estou disposto a pagar pra alguem me ajudar ou > fazer um passo-a-passo pra eu conseguir colocar os thinclients aqui pra dar > boot via PXE e conectar no ts 2008 r2. > > > desde já agradeço. > > > > > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > > > > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNYlMJAAoJEKPh7Uh+JelISjcIAJ644KVEV4XccSRq+mD3UaHa KYuhvocX/KVaFq371OqVJ8IMuNouN7RfMSPQ8EWZ9yU/VIs7pYPHWdHw1GE0Rdv1 JFnZjYPW9caDSkRiRkDmiEipvSoasYcQwPAooba71W8+OG8DmBTqonhhCBjj6Ogl 13AHSNBzuiF0OMqJSebN/qPpw/se4pK4nO+07PMzqTaw83FHlOv1W+KrymUibbMP y7DMVJHZbBC27DB3jaiWbFp/+ZAR6Dhz1kFIRSmCsEchjDwuliBjrE2+t9B6lv68 lm7RlKC6dxPMpyU8ypSoV/YitDWpn3lT2CNfxaGjL3LpZpO16o3gQ4U8BDN/VAA= =Iqcm -----END PGP SIGNATURE----- |
From: Daian C. <da...@op...> - 2011-02-21 13:13:58
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Bom, com windows(urrgggg), sei que tem gente que faz, eu infelizmente só posso lhe ajudar se tiver isso em um server linux :). Mas acredito que seja parecido(o serviço), o servidor dhcp deve ter as intruções para TFTP(File Transfer) e/ou apontar para um server que tenha esse serviço, no caso do dhcp ser no windows, não tenho conecimento sobre as instruções do PXE, mas acredito que deva ter tambem. []s Em 21-02-2011 09:58, Myke Lima escreveu: > eu parei nessa parte aqui > > > * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que voce > possa adicionar o nome/endereço do servidor de tftp e os parâmetros para > o PXE. > > > tenho um servidor DHCP windows que poderia ser usado, mas e esse tftp que eu > não sei... pode ser windows tb ou linux > > > > > Em 21 de fevereiro de 2011 08:56, Daian Conrad <da...@op...>escreveu: > > Bom dia Myke, > > Em que parte voce esta tendo problemas , os clientes iniciam ?? aparece > algum erro ??? > > > Não tenho nenhum passo a passo, mas acho que no site tem algumas > documentações. > > Mass, segue uma rápida descrição do processo . . . > > > * - Ter um linux instalado em uma maquina (que vai servir de server) > > * - Baixar o source do thinstation em > > > http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download > > * - Configurar as opções no arquivo build.conf e thinstation.conf > > ___ Isso pode ser bem complexo dependendo da solução que queira > disponibilizar para os clientes, porem, existem diversos exemplos de > configuração no proprio arquivo. > > BUILD.CONF - este arquivo contem as configurações de kernel e sistema > operacional que sera disponibilizado para os usuários. > > > THINSTATION.CONF - este arquivo, contem informações e configurações > sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: rdesktop, > Xnext, ssh, telnet e afins) > > > * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que voce > possa adicionar o nome/endereço do servidor de tftp e os parâmetros para > o PXE. > > > Depois disso, as estações jah estarão habilitadas a iniciar na rede, > lembrando que ajustes podem ser necessários para ambientes mais > complexos, no seu caso, para iniciar somente o rdesktop, em teoria é > tranquilo. > > > Qualquer coisa posta os erros aqui na lista, e não desiste não, > lembre-se . . . > > o caminho e cheio de pedras, e se voce não tirá-las da sua frente, > sempre terá o dedão machucado ;-) . > > > []s > > > Em 21-02-2011 08:07, Myke Lima escreveu: >>>> bom dia pessoal, >>>> >>>> eu já desisti, não dou conta, estou disposto a pagar pra alguem me ajudar > ou >>>> fazer um passo-a-passo pra eu conseguir colocar os thinclients aqui pra > dar >>>> boot via PXE e conectar no ts 2008 r2. >>>> >>>> >>>> desde já agradeço. >>>> >>>> >>>> >>>> >>>> > ------------------------------------------------------------------------------ >>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: >>>> Pinpoint memory and threading errors before they happen. >>>> Find and fix more than 250 security defects in the development cycle. >>>> Locate bottlenecks in serial and parallel code that limit performance. >>>> http://p.sf.net/sfu/intel-dev2devfeb >>>> >>>> >>>> >>>> _______________________________________________ >>>> Thinstation-portuguese mailing list >>>> Thi...@li... >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >> >> - ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Thinstation-portuguese mailing list Thi...@li... https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNYmXPAAoJEKPh7Uh+JelII1gH/3NIXj3tUO3IYzebIeMhv9wW ztbeAITzcI8UamLUu1IIDSKSckQ1aorRI2GO3MMNC17mnS/z34w+sjeBe1sBAc4a 22BnHXNnAPAr0YYGnglc0/6o0bmGMi80qmNx3rrUQqbl3+kPgA5o7xY9MZ/ZKYTE tVOrZp9WpCCrpucBOvVws9Zk1IPzHnwTUsieeZ+M0JXuopiL3ZWxmiGPN831hypS AznnzS6RrVDyWs5Om/+vrjsKEPNnxLA81Bq13k9fYDxkDaR97dIfC9TbVhtoZ7JQ NSZPNmiO4wlaSrEyjzB0WWKujvefGE4lPzI9yVW7zOYHipnLGX5Wyhkmrt331bw= =u3pi -----END PGP SIGNATURE----- |
From: Myke L. <cm...@gm...> - 2011-02-21 13:17:23
|
Não tem problema, se você me ajudar faço em linux... vou fazer o seguinte vou formatar novamente a maquina aqui e começar do zero, qual melhor distribuição pra instalar, estou instalando o Ubuntu 10.04 pode ser ela mesma? Em 21 de fevereiro de 2011 10:17, Daian Conrad <da...@op...>escreveu: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Bom, com windows(urrgggg), sei que tem gente que faz, eu infelizmente só > posso lhe ajudar se tiver isso em um server linux :). > > > Mas acredito que seja parecido(o serviço), o servidor dhcp deve ter as > intruções para TFTP(File Transfer) e/ou apontar para um server que tenha > esse serviço, no caso do dhcp ser no windows, não tenho conecimento > sobre as instruções do PXE, mas acredito que deva ter tambem. > > > []s > > > Em 21-02-2011 09:58, Myke Lima escreveu: > > eu parei nessa parte aqui > > > > > > * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que voce > > possa adicionar o nome/endereço do servidor de tftp e os parâmetros para > > o PXE. > > > > > > tenho um servidor DHCP windows que poderia ser usado, mas e esse tftp que > eu > > não sei... pode ser windows tb ou linux > > > > > > > > > > Em 21 de fevereiro de 2011 08:56, Daian Conrad <da...@op... > >escreveu: > > > > Bom dia Myke, > > > > Em que parte voce esta tendo problemas , os clientes iniciam ?? aparece > > algum erro ??? > > > > > > Não tenho nenhum passo a passo, mas acho que no site tem algumas > > documentações. > > > > Mass, segue uma rápida descrição do processo . . . > > > > > > * - Ter um linux instalado em uma maquina (que vai servir de server) > > > > * - Baixar o source do thinstation em > > > > > > > http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download > > > > * - Configurar as opções no arquivo build.conf e thinstation.conf > > > > ___ Isso pode ser bem complexo dependendo da solução que queira > > disponibilizar para os clientes, porem, existem diversos exemplos de > > configuração no proprio arquivo. > > > > BUILD.CONF - este arquivo contem as configurações de kernel e sistema > > operacional que sera disponibilizado para os usuários. > > > > > > THINSTATION.CONF - este arquivo, contem informações e configurações > > sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: rdesktop, > > Xnext, ssh, telnet e afins) > > > > > > * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que voce > > possa adicionar o nome/endereço do servidor de tftp e os parâmetros para > > o PXE. > > > > > > Depois disso, as estações jah estarão habilitadas a iniciar na rede, > > lembrando que ajustes podem ser necessários para ambientes mais > > complexos, no seu caso, para iniciar somente o rdesktop, em teoria é > > tranquilo. > > > > > > Qualquer coisa posta os erros aqui na lista, e não desiste não, > > lembre-se . . . > > > > o caminho e cheio de pedras, e se voce não tirá-las da sua frente, > > sempre terá o dedão machucado ;-) . > > > > > > []s > > > > > > Em 21-02-2011 08:07, Myke Lima escreveu: > >>>> bom dia pessoal, > >>>> > >>>> eu já desisti, não dou conta, estou disposto a pagar pra alguem me > ajudar > > ou > >>>> fazer um passo-a-passo pra eu conseguir colocar os thinclients aqui > pra > > dar > >>>> boot via PXE e conectar no ts 2008 r2. > >>>> > >>>> > >>>> desde já agradeço. > >>>> > >>>> > >>>> > >>>> > >>>> > > > ------------------------------------------------------------------------------ > >>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio > XE: > >>>> Pinpoint memory and threading errors before they happen. > >>>> Find and fix more than 250 security defects in the development cycle. > >>>> Locate bottlenecks in serial and parallel code that limit performance. > >>>> http://p.sf.net/sfu/intel-dev2devfeb > >>>> > >>>> > >>>> > >>>> _______________________________________________ > >>>> Thinstation-portuguese mailing list > >>>> Thi...@li... > >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > > > >> > >> > - > > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >> > > - -- > ======================= > *** Daian Conrad > > Linux user: #248912 > PGP/GPG: 0x7E25E948 > > ** OpenS Team (DaCoD) > E-mail: da...@op... > Fone: +55 48 3954-8000 > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.10 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iQEcBAEBAgAGBQJNYmXPAAoJEKPh7Uh+JelII1gH/3NIXj3tUO3IYzebIeMhv9wW > ztbeAITzcI8UamLUu1IIDSKSckQ1aorRI2GO3MMNC17mnS/z34w+sjeBe1sBAc4a > 22BnHXNnAPAr0YYGnglc0/6o0bmGMi80qmNx3rrUQqbl3+kPgA5o7xY9MZ/ZKYTE > tVOrZp9WpCCrpucBOvVws9Zk1IPzHnwTUsieeZ+M0JXuopiL3ZWxmiGPN831hypS > AznnzS6RrVDyWs5Om/+vrjsKEPNnxLA81Bq13k9fYDxkDaR97dIfC9TbVhtoZ7JQ > NSZPNmiO4wlaSrEyjzB0WWKujvefGE4lPzI9yVW7zOYHipnLGX5Wyhkmrt331bw= > =u3pi > -----END PGP SIGNATURE----- > > > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > |
From: Daian C. <da...@op...> - 2011-02-21 13:29:37
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Te aconselharia o Debian, mas o Ububtu é derivado , então jah serve, instala o mais básico que puder, depois precisa instalar mais alguns pacotes, tftpd, dhcp3-server e o restante que for preciso vemos durante o processo. depois disso vamos seguir os passos do outro email que passei ok []s Em 21-02-2011 10:17, Myke Lima escreveu: > Não tem problema, se você me ajudar faço em linux... vou fazer o seguinte > vou formatar novamente a maquina aqui e começar do zero, qual melhor > distribuição pra instalar, estou instalando o Ubuntu 10.04 pode ser ela > mesma? > > > > > Em 21 de fevereiro de 2011 10:17, Daian Conrad <da...@op...>escreveu: > > Bom, com windows(urrgggg), sei que tem gente que faz, eu infelizmente só > posso lhe ajudar se tiver isso em um server linux :). > > > Mas acredito que seja parecido(o serviço), o servidor dhcp deve ter as > intruções para TFTP(File Transfer) e/ou apontar para um server que tenha > esse serviço, no caso do dhcp ser no windows, não tenho conecimento > sobre as instruções do PXE, mas acredito que deva ter tambem. > > > []s > > > Em 21-02-2011 09:58, Myke Lima escreveu: >>>> eu parei nessa parte aqui >>>> >>>> >>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que voce >>>> possa adicionar o nome/endereço do servidor de tftp e os parâmetros para >>>> o PXE. >>>> >>>> >>>> tenho um servidor DHCP windows que poderia ser usado, mas e esse tftp que > eu >>>> não sei... pode ser windows tb ou linux >>>> >>>> >>>> >>>> >>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad <da...@op... >>>> escreveu: >>>> >>>> Bom dia Myke, >>>> >>>> Em que parte voce esta tendo problemas , os clientes iniciam ?? aparece >>>> algum erro ??? >>>> >>>> >>>> Não tenho nenhum passo a passo, mas acho que no site tem algumas >>>> documentações. >>>> >>>> Mass, segue uma rápida descrição do processo . . . >>>> >>>> >>>> * - Ter um linux instalado em uma maquina (que vai servir de server) >>>> >>>> * - Baixar o source do thinstation em >>>> >>>> >>>> > http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download >>>> >>>> * - Configurar as opções no arquivo build.conf e thinstation.conf >>>> >>>> ___ Isso pode ser bem complexo dependendo da solução que queira >>>> disponibilizar para os clientes, porem, existem diversos exemplos de >>>> configuração no proprio arquivo. >>>> >>>> BUILD.CONF - este arquivo contem as configurações de kernel e sistema >>>> operacional que sera disponibilizado para os usuários. >>>> >>>> >>>> THINSTATION.CONF - este arquivo, contem informações e configurações >>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: rdesktop, >>>> Xnext, ssh, telnet e afins) >>>> >>>> >>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que voce >>>> possa adicionar o nome/endereço do servidor de tftp e os parâmetros para >>>> o PXE. >>>> >>>> >>>> Depois disso, as estações jah estarão habilitadas a iniciar na rede, >>>> lembrando que ajustes podem ser necessários para ambientes mais >>>> complexos, no seu caso, para iniciar somente o rdesktop, em teoria é >>>> tranquilo. >>>> >>>> >>>> Qualquer coisa posta os erros aqui na lista, e não desiste não, >>>> lembre-se . . . >>>> >>>> o caminho e cheio de pedras, e se voce não tirá-las da sua frente, >>>> sempre terá o dedão machucado ;-) . >>>> >>>> >>>> []s >>>> >>>> >>>> Em 21-02-2011 08:07, Myke Lima escreveu: >>>>>>> bom dia pessoal, >>>>>>> >>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra alguem me > ajudar >>>> ou >>>>>>> fazer um passo-a-passo pra eu conseguir colocar os thinclients aqui > pra >>>> dar >>>>>>> boot via PXE e conectar no ts 2008 r2. >>>>>>> >>>>>>> >>>>>>> desde já agradeço. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>> > ------------------------------------------------------------------------------ >>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio > XE: >>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>> Find and fix more than 250 security defects in the development cycle. >>>>>>> Locate bottlenecks in serial and parallel code that limit performance. >>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Thinstation-portuguese mailing list >>>>>>> Thi...@li... >>>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>> >>>>> >>>>> > - > > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>> > >> >> - ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Thinstation-portuguese mailing list Thi...@li... https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNYml6AAoJEKPh7Uh+JelIeKgH/jGlQABkLUA5yXRkpe0Xn06U 5rXu6ljMIN8x/l2LHRTl+IulG4cjouItp12y2grUuCCgtIRsrWzt08TUjWQD5Z4A 1d9ZiIUqXb2a6K1NJbaGqPzN5tBua+bhLi5P//zrsyYj1s5NAJQHjXqe2NHlGPb7 cfHHZiUqmxROPcV++LrPj7k16lSG501F3DgZeoXU9PKTtMoSI1856gwk+iCmoDOY WJOW7yH9QYV4iU+jwObx5gdesIWUo8E90wSzVsgAc+gXR0aLPt1hcOm+IN1UHv55 fa8S6Qz0QfbffbNAP1gYgNz4GuWZgs3MMJIugJ00pAFjNFQnr2obULyJAAkotpM= =u7Cx -----END PGP SIGNATURE----- |
From: Myke L. <cm...@gm...> - 2011-02-21 13:31:34
|
ok, pode deixar, qnd terminar te aviso Em 21 de fevereiro de 2011 10:32, Daian Conrad <da...@op...>escreveu: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Te aconselharia o Debian, mas o Ububtu é derivado , então jah serve, > instala o mais básico que puder, depois precisa instalar mais alguns > pacotes, tftpd, dhcp3-server e o restante que for preciso vemos durante > o processo. > > depois disso vamos seguir os passos do outro email que passei ok > > []s > > > Em 21-02-2011 10:17, Myke Lima escreveu: > > Não tem problema, se você me ajudar faço em linux... vou fazer o seguinte > > vou formatar novamente a maquina aqui e começar do zero, qual melhor > > distribuição pra instalar, estou instalando o Ubuntu 10.04 pode ser ela > > mesma? > > > > > > > > > > Em 21 de fevereiro de 2011 10:17, Daian Conrad <da...@op... > >escreveu: > > > > Bom, com windows(urrgggg), sei que tem gente que faz, eu infelizmente só > > posso lhe ajudar se tiver isso em um server linux :). > > > > > > Mas acredito que seja parecido(o serviço), o servidor dhcp deve ter as > > intruções para TFTP(File Transfer) e/ou apontar para um server que tenha > > esse serviço, no caso do dhcp ser no windows, não tenho conecimento > > sobre as instruções do PXE, mas acredito que deva ter tambem. > > > > > > []s > > > > > > Em 21-02-2011 09:58, Myke Lima escreveu: > >>>> eu parei nessa parte aqui > >>>> > >>>> > >>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que > voce > >>>> possa adicionar o nome/endereço do servidor de tftp e os parâmetros > para > >>>> o PXE. > >>>> > >>>> > >>>> tenho um servidor DHCP windows que poderia ser usado, mas e esse tftp > que > > eu > >>>> não sei... pode ser windows tb ou linux > >>>> > >>>> > >>>> > >>>> > >>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad <da...@op... > >>>> escreveu: > >>>> > >>>> Bom dia Myke, > >>>> > >>>> Em que parte voce esta tendo problemas , os clientes iniciam ?? > aparece > >>>> algum erro ??? > >>>> > >>>> > >>>> Não tenho nenhum passo a passo, mas acho que no site tem algumas > >>>> documentações. > >>>> > >>>> Mass, segue uma rápida descrição do processo . . . > >>>> > >>>> > >>>> * - Ter um linux instalado em uma maquina (que vai servir de server) > >>>> > >>>> * - Baixar o source do thinstation em > >>>> > >>>> > >>>> > > > http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download > >>>> > >>>> * - Configurar as opções no arquivo build.conf e thinstation.conf > >>>> > >>>> ___ Isso pode ser bem complexo dependendo da solução que queira > >>>> disponibilizar para os clientes, porem, existem diversos exemplos de > >>>> configuração no proprio arquivo. > >>>> > >>>> BUILD.CONF - este arquivo contem as configurações de kernel e sistema > >>>> operacional que sera disponibilizado para os usuários. > >>>> > >>>> > >>>> THINSTATION.CONF - este arquivo, contem informações e configurações > >>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: rdesktop, > >>>> Xnext, ssh, telnet e afins) > >>>> > >>>> > >>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que > voce > >>>> possa adicionar o nome/endereço do servidor de tftp e os parâmetros > para > >>>> o PXE. > >>>> > >>>> > >>>> Depois disso, as estações jah estarão habilitadas a iniciar na rede, > >>>> lembrando que ajustes podem ser necessários para ambientes mais > >>>> complexos, no seu caso, para iniciar somente o rdesktop, em teoria é > >>>> tranquilo. > >>>> > >>>> > >>>> Qualquer coisa posta os erros aqui na lista, e não desiste não, > >>>> lembre-se . . . > >>>> > >>>> o caminho e cheio de pedras, e se voce não tirá-las da sua frente, > >>>> sempre terá o dedão machucado ;-) . > >>>> > >>>> > >>>> []s > >>>> > >>>> > >>>> Em 21-02-2011 08:07, Myke Lima escreveu: > >>>>>>> bom dia pessoal, > >>>>>>> > >>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra alguem me > > ajudar > >>>> ou > >>>>>>> fazer um passo-a-passo pra eu conseguir colocar os thinclients aqui > > pra > >>>> dar > >>>>>>> boot via PXE e conectar no ts 2008 r2. > >>>>>>> > >>>>>>> > >>>>>>> desde já agradeço. > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>> > > > ------------------------------------------------------------------------------ > >>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel > Studio > > XE: > >>>>>>> Pinpoint memory and threading errors before they happen. > >>>>>>> Find and fix more than 250 security defects in the development > cycle. > >>>>>>> Locate bottlenecks in serial and parallel code that limit > performance. > >>>>>>> http://p.sf.net/sfu/intel-dev2devfeb > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> Thinstation-portuguese mailing list > >>>>>>> Thi...@li... > >>>>>>> > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >>>> > >>>>> > >>>>> > > - > > > > > ------------------------------------------------------------------------------ > > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > > Pinpoint memory and threading errors before they happen. > > Find and fix more than 250 security defects in the development cycle. > > Locate bottlenecks in serial and parallel code that limit performance. > > http://p.sf.net/sfu/intel-dev2devfeb > > _______________________________________________ > > Thinstation-portuguese mailing list > > Thi...@li... > > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >>>>> > > > >> > >> > - > > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >> > > - -- > ======================= > *** Daian Conrad > > Linux user: #248912 > PGP/GPG: 0x7E25E948 > > ** OpenS Team (DaCoD) > E-mail: da...@op... > Fone: +55 48 3954-8000 > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.10 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iQEcBAEBAgAGBQJNYml6AAoJEKPh7Uh+JelIeKgH/jGlQABkLUA5yXRkpe0Xn06U > 5rXu6ljMIN8x/l2LHRTl+IulG4cjouItp12y2grUuCCgtIRsrWzt08TUjWQD5Z4A > 1d9ZiIUqXb2a6K1NJbaGqPzN5tBua+bhLi5P//zrsyYj1s5NAJQHjXqe2NHlGPb7 > cfHHZiUqmxROPcV++LrPj7k16lSG501F3DgZeoXU9PKTtMoSI1856gwk+iCmoDOY > WJOW7yH9QYV4iU+jwObx5gdesIWUo8E90wSzVsgAc+gXR0aLPt1hcOm+IN1UHv55 > fa8S6Qz0QfbffbNAP1gYgNz4GuWZgs3MMJIugJ00pAFjNFQnr2obULyJAAkotpM= > =u7Cx > -----END PGP SIGNATURE----- > > > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > |
From: Myke L. <cm...@gm...> - 2011-02-21 17:25:20
|
Qual diretório fica melhor para extrair o pacote Thinstation-2.2.2f.tar.bz2? Em 21 de fevereiro de 2011 10:31, Myke Lima <cm...@gm...> escreveu: > ok, pode deixar, qnd terminar te aviso > > > > > Em 21 de fevereiro de 2011 10:32, Daian Conrad <da...@op...>escreveu: > > -----BEGIN PGP SIGNED MESSAGE----- >> Hash: SHA1 >> >> Te aconselharia o Debian, mas o Ububtu é derivado , então jah serve, >> instala o mais básico que puder, depois precisa instalar mais alguns >> pacotes, tftpd, dhcp3-server e o restante que for preciso vemos durante >> o processo. >> >> depois disso vamos seguir os passos do outro email que passei ok >> >> []s >> >> >> Em 21-02-2011 10:17, Myke Lima escreveu: >> > Não tem problema, se você me ajudar faço em linux... vou fazer o >> seguinte >> > vou formatar novamente a maquina aqui e começar do zero, qual melhor >> > distribuição pra instalar, estou instalando o Ubuntu 10.04 pode ser ela >> > mesma? >> > >> > >> > >> > >> > Em 21 de fevereiro de 2011 10:17, Daian Conrad <da...@op... >> >escreveu: >> > >> > Bom, com windows(urrgggg), sei que tem gente que faz, eu infelizmente só >> > posso lhe ajudar se tiver isso em um server linux :). >> > >> > >> > Mas acredito que seja parecido(o serviço), o servidor dhcp deve ter as >> > intruções para TFTP(File Transfer) e/ou apontar para um server que tenha >> > esse serviço, no caso do dhcp ser no windows, não tenho conecimento >> > sobre as instruções do PXE, mas acredito que deva ter tambem. >> > >> > >> > []s >> > >> > >> > Em 21-02-2011 09:58, Myke Lima escreveu: >> >>>> eu parei nessa parte aqui >> >>>> >> >>>> >> >>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que >> voce >> >>>> possa adicionar o nome/endereço do servidor de tftp e os parâmetros >> para >> >>>> o PXE. >> >>>> >> >>>> >> >>>> tenho um servidor DHCP windows que poderia ser usado, mas e esse tftp >> que >> > eu >> >>>> não sei... pode ser windows tb ou linux >> >>>> >> >>>> >> >>>> >> >>>> >> >>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad <da...@op... >> >>>> escreveu: >> >>>> >> >>>> Bom dia Myke, >> >>>> >> >>>> Em que parte voce esta tendo problemas , os clientes iniciam ?? >> aparece >> >>>> algum erro ??? >> >>>> >> >>>> >> >>>> Não tenho nenhum passo a passo, mas acho que no site tem algumas >> >>>> documentações. >> >>>> >> >>>> Mass, segue uma rápida descrição do processo . . . >> >>>> >> >>>> >> >>>> * - Ter um linux instalado em uma maquina (que vai servir de server) >> >>>> >> >>>> * - Baixar o source do thinstation em >> >>>> >> >>>> >> >>>> >> > >> http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download >> >>>> >> >>>> * - Configurar as opções no arquivo build.conf e thinstation.conf >> >>>> >> >>>> ___ Isso pode ser bem complexo dependendo da solução que queira >> >>>> disponibilizar para os clientes, porem, existem diversos exemplos de >> >>>> configuração no proprio arquivo. >> >>>> >> >>>> BUILD.CONF - este arquivo contem as configurações de kernel e sistema >> >>>> operacional que sera disponibilizado para os usuários. >> >>>> >> >>>> >> >>>> THINSTATION.CONF - este arquivo, contem informações e configurações >> >>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: >> rdesktop, >> >>>> Xnext, ssh, telnet e afins) >> >>>> >> >>>> >> >>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que >> voce >> >>>> possa adicionar o nome/endereço do servidor de tftp e os parâmetros >> para >> >>>> o PXE. >> >>>> >> >>>> >> >>>> Depois disso, as estações jah estarão habilitadas a iniciar na rede, >> >>>> lembrando que ajustes podem ser necessários para ambientes mais >> >>>> complexos, no seu caso, para iniciar somente o rdesktop, em teoria é >> >>>> tranquilo. >> >>>> >> >>>> >> >>>> Qualquer coisa posta os erros aqui na lista, e não desiste não, >> >>>> lembre-se . . . >> >>>> >> >>>> o caminho e cheio de pedras, e se voce não tirá-las da sua frente, >> >>>> sempre terá o dedão machucado ;-) . >> >>>> >> >>>> >> >>>> []s >> >>>> >> >>>> >> >>>> Em 21-02-2011 08:07, Myke Lima escreveu: >> >>>>>>> bom dia pessoal, >> >>>>>>> >> >>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra alguem me >> > ajudar >> >>>> ou >> >>>>>>> fazer um passo-a-passo pra eu conseguir colocar os thinclients >> aqui >> > pra >> >>>> dar >> >>>>>>> boot via PXE e conectar no ts 2008 r2. >> >>>>>>> >> >>>>>>> >> >>>>>>> desde já agradeço. >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>> >> > >> ------------------------------------------------------------------------------ >> >>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >> Studio >> > XE: >> >>>>>>> Pinpoint memory and threading errors before they happen. >> >>>>>>> Find and fix more than 250 security defects in the development >> cycle. >> >>>>>>> Locate bottlenecks in serial and parallel code that limit >> performance. >> >>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> _______________________________________________ >> >>>>>>> Thinstation-portuguese mailing list >> >>>>>>> Thi...@li... >> >>>>>>> >> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> >>>> >> >>>>> >> >>>>> >> > - >> > >> > >> ------------------------------------------------------------------------------ >> > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio >> XE: >> > Pinpoint memory and threading errors before they happen. >> > Find and fix more than 250 security defects in the development cycle. >> > Locate bottlenecks in serial and parallel code that limit performance. >> > http://p.sf.net/sfu/intel-dev2devfeb >> > _______________________________________________ >> > Thinstation-portuguese mailing list >> > Thi...@li... >> > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> >>>>> >> > >> >> >> >> >> - >> >> ------------------------------------------------------------------------------ >> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: >> Pinpoint memory and threading errors before they happen. >> Find and fix more than 250 security defects in the development cycle. >> Locate bottlenecks in serial and parallel code that limit performance. >> http://p.sf.net/sfu/intel-dev2devfeb >> _______________________________________________ >> Thinstation-portuguese mailing list >> Thi...@li... >> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> >> >> >> - -- >> ======================= >> *** Daian Conrad >> >> Linux user: #248912 >> PGP/GPG: 0x7E25E948 >> >> ** OpenS Team (DaCoD) >> E-mail: da...@op... >> Fone: +55 48 3954-8000 >> >> -----BEGIN PGP SIGNATURE----- >> Version: GnuPG v1.4.10 (GNU/Linux) >> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ >> >> iQEcBAEBAgAGBQJNYml6AAoJEKPh7Uh+JelIeKgH/jGlQABkLUA5yXRkpe0Xn06U >> 5rXu6ljMIN8x/l2LHRTl+IulG4cjouItp12y2grUuCCgtIRsrWzt08TUjWQD5Z4A >> 1d9ZiIUqXb2a6K1NJbaGqPzN5tBua+bhLi5P//zrsyYj1s5NAJQHjXqe2NHlGPb7 >> cfHHZiUqmxROPcV++LrPj7k16lSG501F3DgZeoXU9PKTtMoSI1856gwk+iCmoDOY >> WJOW7yH9QYV4iU+jwObx5gdesIWUo8E90wSzVsgAc+gXR0aLPt1hcOm+IN1UHv55 >> fa8S6Qz0QfbffbNAP1gYgNz4GuWZgs3MMJIugJ00pAFjNFQnr2obULyJAAkotpM= >> =u7Cx >> -----END PGP SIGNATURE----- >> >> >> ------------------------------------------------------------------------------ >> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: >> Pinpoint memory and threading errors before they happen. >> Find and fix more than 250 security defects in the development cycle. >> Locate bottlenecks in serial and parallel code that limit performance. >> http://p.sf.net/sfu/intel-dev2devfeb >> _______________________________________________ >> Thinstation-portuguese mailing list >> Thi...@li... >> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> > > |
From: Daian C. <da...@op...> - 2011-02-21 19:52:26
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Eu costumo criar no raiz, /tftpboot ou algo do tipo . . . []s Em 21-02-2011 14:25, Myke Lima escreveu: > Qual diretório fica melhor para extrair o pacote Thinstation-2.2.2f.tar.bz2? > > > > > > > > Em 21 de fevereiro de 2011 10:31, Myke Lima <cm...@gm...> escreveu: > >> ok, pode deixar, qnd terminar te aviso >> >> >> >> >> Em 21 de fevereiro de 2011 10:32, Daian Conrad <da...@op...>escreveu: >> >> -----BEGIN PGP SIGNED MESSAGE----- >>> Hash: SHA1 >>> >>> Te aconselharia o Debian, mas o Ububtu é derivado , então jah serve, >>> instala o mais básico que puder, depois precisa instalar mais alguns >>> pacotes, tftpd, dhcp3-server e o restante que for preciso vemos durante >>> o processo. >>> >>> depois disso vamos seguir os passos do outro email que passei ok >>> >>> []s >>> >>> >>> Em 21-02-2011 10:17, Myke Lima escreveu: >>>> Não tem problema, se você me ajudar faço em linux... vou fazer o >>> seguinte >>>> vou formatar novamente a maquina aqui e começar do zero, qual melhor >>>> distribuição pra instalar, estou instalando o Ubuntu 10.04 pode ser ela >>>> mesma? >>>> >>>> >>>> >>>> >>>> Em 21 de fevereiro de 2011 10:17, Daian Conrad <da...@op... >>>> escreveu: >>>> >>>> Bom, com windows(urrgggg), sei que tem gente que faz, eu infelizmente só >>>> posso lhe ajudar se tiver isso em um server linux :). >>>> >>>> >>>> Mas acredito que seja parecido(o serviço), o servidor dhcp deve ter as >>>> intruções para TFTP(File Transfer) e/ou apontar para um server que tenha >>>> esse serviço, no caso do dhcp ser no windows, não tenho conecimento >>>> sobre as instruções do PXE, mas acredito que deva ter tambem. >>>> >>>> >>>> []s >>>> >>>> >>>> Em 21-02-2011 09:58, Myke Lima escreveu: >>>>>>> eu parei nessa parte aqui >>>>>>> >>>>>>> >>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que >>> voce >>>>>>> possa adicionar o nome/endereço do servidor de tftp e os parâmetros >>> para >>>>>>> o PXE. >>>>>>> >>>>>>> >>>>>>> tenho um servidor DHCP windows que poderia ser usado, mas e esse tftp >>> que >>>> eu >>>>>>> não sei... pode ser windows tb ou linux >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad <da...@op... >>>>>>> escreveu: >>>>>>> >>>>>>> Bom dia Myke, >>>>>>> >>>>>>> Em que parte voce esta tendo problemas , os clientes iniciam ?? >>> aparece >>>>>>> algum erro ??? >>>>>>> >>>>>>> >>>>>>> Não tenho nenhum passo a passo, mas acho que no site tem algumas >>>>>>> documentações. >>>>>>> >>>>>>> Mass, segue uma rápida descrição do processo . . . >>>>>>> >>>>>>> >>>>>>> * - Ter um linux instalado em uma maquina (que vai servir de server) >>>>>>> >>>>>>> * - Baixar o source do thinstation em >>>>>>> >>>>>>> >>>>>>> >>>> >>> http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download >>>>>>> >>>>>>> * - Configurar as opções no arquivo build.conf e thinstation.conf >>>>>>> >>>>>>> ___ Isso pode ser bem complexo dependendo da solução que queira >>>>>>> disponibilizar para os clientes, porem, existem diversos exemplos de >>>>>>> configuração no proprio arquivo. >>>>>>> >>>>>>> BUILD.CONF - este arquivo contem as configurações de kernel e sistema >>>>>>> operacional que sera disponibilizado para os usuários. >>>>>>> >>>>>>> >>>>>>> THINSTATION.CONF - este arquivo, contem informações e configurações >>>>>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: >>> rdesktop, >>>>>>> Xnext, ssh, telnet e afins) >>>>>>> >>>>>>> >>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que >>> voce >>>>>>> possa adicionar o nome/endereço do servidor de tftp e os parâmetros >>> para >>>>>>> o PXE. >>>>>>> >>>>>>> >>>>>>> Depois disso, as estações jah estarão habilitadas a iniciar na rede, >>>>>>> lembrando que ajustes podem ser necessários para ambientes mais >>>>>>> complexos, no seu caso, para iniciar somente o rdesktop, em teoria é >>>>>>> tranquilo. >>>>>>> >>>>>>> >>>>>>> Qualquer coisa posta os erros aqui na lista, e não desiste não, >>>>>>> lembre-se . . . >>>>>>> >>>>>>> o caminho e cheio de pedras, e se voce não tirá-las da sua frente, >>>>>>> sempre terá o dedão machucado ;-) . >>>>>>> >>>>>>> >>>>>>> []s >>>>>>> >>>>>>> >>>>>>> Em 21-02-2011 08:07, Myke Lima escreveu: >>>>>>>>>> bom dia pessoal, >>>>>>>>>> >>>>>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra alguem me >>>> ajudar >>>>>>> ou >>>>>>>>>> fazer um passo-a-passo pra eu conseguir colocar os thinclients >>> aqui >>>> pra >>>>>>> dar >>>>>>>>>> boot via PXE e conectar no ts 2008 r2. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> desde já agradeço. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>> >>>> >>> ------------------------------------------------------------------------------ >>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >>> Studio >>>> XE: >>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>> Find and fix more than 250 security defects in the development >>> cycle. >>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>> performance. >>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>> Thi...@li... >>>>>>>>>> >>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>> >>>>>>>> >>>>>>>> >>>> - >>>> >>>> >>> ------------------------------------------------------------------------------ >>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio >>> XE: >>>> Pinpoint memory and threading errors before they happen. >>>> Find and fix more than 250 security defects in the development cycle. >>>> Locate bottlenecks in serial and parallel code that limit performance. >>>> http://p.sf.net/sfu/intel-dev2devfeb >>>> _______________________________________________ >>>> Thinstation-portuguese mailing list >>>> Thi...@li... >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>> >>>> >>>>> >>>>> >>> - >>> >>> ------------------------------------------------------------------------------ >>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: >>> Pinpoint memory and threading errors before they happen. >>> Find and fix more than 250 security defects in the development cycle. >>> Locate bottlenecks in serial and parallel code that limit performance. >>> http://p.sf.net/sfu/intel-dev2devfeb >>> _______________________________________________ >>> Thinstation-portuguese mailing list >>> Thi...@li... >>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>> >>> >>> - -- >>> ======================= >>> *** Daian Conrad >>> >>> Linux user: #248912 >>> PGP/GPG: 0x7E25E948 >>> >>> ** OpenS Team (DaCoD) >>> E-mail: da...@op... >>> Fone: +55 48 3954-8000 >>> >>> -----BEGIN PGP SIGNATURE----- >>> Version: GnuPG v1.4.10 (GNU/Linux) >>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ >>> >>> iQEcBAEBAgAGBQJNYml6AAoJEKPh7Uh+JelIeKgH/jGlQABkLUA5yXRkpe0Xn06U >>> 5rXu6ljMIN8x/l2LHRTl+IulG4cjouItp12y2grUuCCgtIRsrWzt08TUjWQD5Z4A >>> 1d9ZiIUqXb2a6K1NJbaGqPzN5tBua+bhLi5P//zrsyYj1s5NAJQHjXqe2NHlGPb7 >>> cfHHZiUqmxROPcV++LrPj7k16lSG501F3DgZeoXU9PKTtMoSI1856gwk+iCmoDOY >>> WJOW7yH9QYV4iU+jwObx5gdesIWUo8E90wSzVsgAc+gXR0aLPt1hcOm+IN1UHv55 >>> fa8S6Qz0QfbffbNAP1gYgNz4GuWZgs3MMJIugJ00pAFjNFQnr2obULyJAAkotpM= >>> =u7Cx >>> -----END PGP SIGNATURE----- >>> >>> >>> ------------------------------------------------------------------------------ >>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: >>> Pinpoint memory and threading errors before they happen. >>> Find and fix more than 250 security defects in the development cycle. >>> Locate bottlenecks in serial and parallel code that limit performance. >>> http://p.sf.net/sfu/intel-dev2devfeb >>> _______________________________________________ >>> Thinstation-portuguese mailing list >>> Thi...@li... >>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>> >> >> > - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNYsMvAAoJEKPh7Uh+JelI/KIH/1EaeqHMh8iD8OvLey435mip KyaFTuGgpfE5KoGWWWw+sapwZGh8l1PTXJqKmDExV6mVrZvCygxBW8wwgQ+sjy15 zzOGXpnesQUsjL2RB09GY2w1+/2YMbRG8vk4Jc2bVDn5IR5rbPF3tlUFxBNtfAzJ Hp9LSIbvTiQegNcEVZzLDgLJBBFWBipBSz7PNXeYrZ9rzrSt6Gx6bxyjSD2FeY1I /jafTHuSKdS2veeqYgxTeqvya/72J5FYFntUSflj/k4je5ooR+bJBY5XM1tm3XIG T5nn+WgDB7g4ZenQieg6ZspRHOE1nEpTuF/kf5dT7WkqsFps+NXLCzTxtOtCFeY= =4EZg -----END PGP SIGNATURE----- |
From: Daian C. <da...@op...> - 2011-02-21 19:59:44
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Os arquivos parecem estar corretos, faltando somente, compilar a imagem, ver se vai criar certinho e conferir a configuração do serviço tftp e do dhcp. []s Em 21-02-2011 14:59, Myke Lima escreveu: > Deem uma olhada nos meus arquivos de conf, para ver se ta tudo ok. antes de > eu gerar o ./build > > lembrando que meus Thinclients são exatamente esses modelos aqui: > http://www.connec.com.br/site/p01b1.asp > > somente boot PXE e quero carregalos no ts do 2008 r2 > > > > > > > Em 21 de fevereiro de 2011 14:25, Myke Lima <cm...@gm...> escreveu: > >> Qual diretório fica melhor para extrair o pacote >> Thinstation-2.2.2f.tar.bz2? >> >> >> >> >> >> >> >> Em 21 de fevereiro de 2011 10:31, Myke Lima <cm...@gm...> escreveu: >> >> ok, pode deixar, qnd terminar te aviso >>> >>> >>> >>> >>> Em 21 de fevereiro de 2011 10:32, Daian Conrad <da...@op...>escreveu: >>> >>> -----BEGIN PGP SIGNED MESSAGE----- >>>> Hash: SHA1 >>>> >>>> Te aconselharia o Debian, mas o Ububtu é derivado , então jah serve, >>>> instala o mais básico que puder, depois precisa instalar mais alguns >>>> pacotes, tftpd, dhcp3-server e o restante que for preciso vemos durante >>>> o processo. >>>> >>>> depois disso vamos seguir os passos do outro email que passei ok >>>> >>>> []s >>>> >>>> >>>> Em 21-02-2011 10:17, Myke Lima escreveu: >>>>> Não tem problema, se você me ajudar faço em linux... vou fazer o >>>> seguinte >>>>> vou formatar novamente a maquina aqui e começar do zero, qual melhor >>>>> distribuição pra instalar, estou instalando o Ubuntu 10.04 pode ser ela >>>>> mesma? >>>>> >>>>> >>>>> >>>>> >>>>> Em 21 de fevereiro de 2011 10:17, Daian Conrad <da...@op... >>>>> escreveu: >>>>> >>>>> Bom, com windows(urrgggg), sei que tem gente que faz, eu infelizmente >>>> só >>>>> posso lhe ajudar se tiver isso em um server linux :). >>>>> >>>>> >>>>> Mas acredito que seja parecido(o serviço), o servidor dhcp deve ter as >>>>> intruções para TFTP(File Transfer) e/ou apontar para um server que >>>> tenha >>>>> esse serviço, no caso do dhcp ser no windows, não tenho conecimento >>>>> sobre as instruções do PXE, mas acredito que deva ter tambem. >>>>> >>>>> >>>>> []s >>>>> >>>>> >>>>> Em 21-02-2011 09:58, Myke Lima escreveu: >>>>>>>> eu parei nessa parte aqui >>>>>>>> >>>>>>>> >>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que >>>> voce >>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os parâmetros >>>> para >>>>>>>> o PXE. >>>>>>>> >>>>>>>> >>>>>>>> tenho um servidor DHCP windows que poderia ser usado, mas e esse >>>> tftp que >>>>> eu >>>>>>>> não sei... pode ser windows tb ou linux >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad <da...@op... >>>>>>>> escreveu: >>>>>>>> >>>>>>>> Bom dia Myke, >>>>>>>> >>>>>>>> Em que parte voce esta tendo problemas , os clientes iniciam ?? >>>> aparece >>>>>>>> algum erro ??? >>>>>>>> >>>>>>>> >>>>>>>> Não tenho nenhum passo a passo, mas acho que no site tem algumas >>>>>>>> documentações. >>>>>>>> >>>>>>>> Mass, segue uma rápida descrição do processo . . . >>>>>>>> >>>>>>>> >>>>>>>> * - Ter um linux instalado em uma maquina (que vai servir de server) >>>>>>>> >>>>>>>> * - Baixar o source do thinstation em >>>>>>>> >>>>>>>> >>>>>>>> >>>>> >>>> http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download >>>>>>>> >>>>>>>> * - Configurar as opções no arquivo build.conf e thinstation.conf >>>>>>>> >>>>>>>> ___ Isso pode ser bem complexo dependendo da solução que queira >>>>>>>> disponibilizar para os clientes, porem, existem diversos exemplos de >>>>>>>> configuração no proprio arquivo. >>>>>>>> >>>>>>>> BUILD.CONF - este arquivo contem as configurações de kernel e >>>> sistema >>>>>>>> operacional que sera disponibilizado para os usuários. >>>>>>>> >>>>>>>> >>>>>>>> THINSTATION.CONF - este arquivo, contem informações e configurações >>>>>>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: >>>> rdesktop, >>>>>>>> Xnext, ssh, telnet e afins) >>>>>>>> >>>>>>>> >>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que >>>> voce >>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os parâmetros >>>> para >>>>>>>> o PXE. >>>>>>>> >>>>>>>> >>>>>>>> Depois disso, as estações jah estarão habilitadas a iniciar na rede, >>>>>>>> lembrando que ajustes podem ser necessários para ambientes mais >>>>>>>> complexos, no seu caso, para iniciar somente o rdesktop, em teoria é >>>>>>>> tranquilo. >>>>>>>> >>>>>>>> >>>>>>>> Qualquer coisa posta os erros aqui na lista, e não desiste não, >>>>>>>> lembre-se . . . >>>>>>>> >>>>>>>> o caminho e cheio de pedras, e se voce não tirá-las da sua frente, >>>>>>>> sempre terá o dedão machucado ;-) . >>>>>>>> >>>>>>>> >>>>>>>> []s >>>>>>>> >>>>>>>> >>>>>>>> Em 21-02-2011 08:07, Myke Lima escreveu: >>>>>>>>>>> bom dia pessoal, >>>>>>>>>>> >>>>>>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra alguem >>>> me >>>>> ajudar >>>>>>>> ou >>>>>>>>>>> fazer um passo-a-passo pra eu conseguir colocar os thinclients >>>> aqui >>>>> pra >>>>>>>> dar >>>>>>>>>>> boot via PXE e conectar no ts 2008 r2. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> desde já agradeço. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>> >>>>> >>>> ------------------------------------------------------------------------------ >>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >>>> Studio >>>>> XE: >>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>> Find and fix more than 250 security defects in the development >>>> cycle. >>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>> performance. >>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>> Thi...@li... >>>>>>>>>>> >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>> - >>>>> >>>>> >>>> ------------------------------------------------------------------------------ >>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio >>>> XE: >>>>> Pinpoint memory and threading errors before they happen. >>>>> Find and fix more than 250 security defects in the development cycle. >>>>> Locate bottlenecks in serial and parallel code that limit performance. >>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>> _______________________________________________ >>>>> Thinstation-portuguese mailing list >>>>> Thi...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>> >>>>> >>>>>> >>>>>> >>>> - >>>> >>>> ------------------------------------------------------------------------------ >>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: >>>> Pinpoint memory and threading errors before they happen. >>>> Find and fix more than 250 security defects in the development cycle. >>>> Locate bottlenecks in serial and parallel code that limit performance. >>>> http://p.sf.net/sfu/intel-dev2devfeb >>>> _______________________________________________ >>>> Thinstation-portuguese mailing list >>>> Thi...@li... >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>> >>>> >>>> - -- >>>> ======================= >>>> *** Daian Conrad >>>> >>>> Linux user: #248912 >>>> PGP/GPG: 0x7E25E948 >>>> >>>> ** OpenS Team (DaCoD) >>>> E-mail: da...@op... >>>> Fone: +55 48 3954-8000 >>>> >>>> -----BEGIN PGP SIGNATURE----- >>>> Version: GnuPG v1.4.10 (GNU/Linux) >>>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ >>>> >>>> iQEcBAEBAgAGBQJNYml6AAoJEKPh7Uh+JelIeKgH/jGlQABkLUA5yXRkpe0Xn06U >>>> 5rXu6ljMIN8x/l2LHRTl+IulG4cjouItp12y2grUuCCgtIRsrWzt08TUjWQD5Z4A >>>> 1d9ZiIUqXb2a6K1NJbaGqPzN5tBua+bhLi5P//zrsyYj1s5NAJQHjXqe2NHlGPb7 >>>> cfHHZiUqmxROPcV++LrPj7k16lSG501F3DgZeoXU9PKTtMoSI1856gwk+iCmoDOY >>>> WJOW7yH9QYV4iU+jwObx5gdesIWUo8E90wSzVsgAc+gXR0aLPt1hcOm+IN1UHv55 >>>> fa8S6Qz0QfbffbNAP1gYgNz4GuWZgs3MMJIugJ00pAFjNFQnr2obULyJAAkotpM= >>>> =u7Cx >>>> -----END PGP SIGNATURE----- >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: >>>> Pinpoint memory and threading errors before they happen. >>>> Find and fix more than 250 security defects in the development cycle. >>>> Locate bottlenecks in serial and parallel code that limit performance. >>>> http://p.sf.net/sfu/intel-dev2devfeb >>>> _______________________________________________ >>>> Thinstation-portuguese mailing list >>>> Thi...@li... >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>> >>> >>> >> > - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNYsTnAAoJEKPh7Uh+JelIhu4IAJ5SRU4ORaBmTK8coJWFTrhx kvb1LwU41Khv0Fg/Juq6TUxM/t96VaQvXpqiN2Ch/dFahiHgXvmxG2bv1xRMhSTA y9dsFuKpb59mV+N4lDkhgaFjn6Xiajww4ikXu3sKgmorWVJiUS3jXJcZkSrdImq/ PPIvh6TTIomVCWP5zpx3aYRFjINKvwiHWtxs69bGuW/Iy4ifqUHsVwZxokRHsPRm hhKAGGBFUNzrLMnu4zrvvmbWKRZCLu5WjLWCHVGCAT812SoihnvHBAyGDBvYaMCw UfzSzHS1wcnui3/B83NayfKPh05xR4qGYeha4XsfztwIKXzgamM+VYW1zFnG01Y= =c+1z -----END PGP SIGNATURE----- |
From: Myke L. <cm...@gm...> - 2011-02-21 20:58:57
|
Ok, imagem gerada sem problemas, agora falta o dhcp e o tftp Em 21 de fevereiro de 2011 17:02, Daian Conrad <da...@op...>escreveu: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Os arquivos parecem estar corretos, faltando somente, compilar a imagem, > ver se vai criar certinho e conferir a configuração do serviço tftp e do > dhcp. > > []s > > > Em 21-02-2011 14:59, Myke Lima escreveu: > > Deem uma olhada nos meus arquivos de conf, para ver se ta tudo ok. antes > de > > eu gerar o ./build > > > > lembrando que meus Thinclients são exatamente esses modelos aqui: > > http://www.connec.com.br/site/p01b1.asp > > > > somente boot PXE e quero carregalos no ts do 2008 r2 > > > > > > > > > > > > > > Em 21 de fevereiro de 2011 14:25, Myke Lima <cm...@gm...> > escreveu: > > > >> Qual diretório fica melhor para extrair o pacote > >> Thinstation-2.2.2f.tar.bz2? > >> > >> > >> > >> > >> > >> > >> > >> Em 21 de fevereiro de 2011 10:31, Myke Lima <cm...@gm...> > escreveu: > >> > >> ok, pode deixar, qnd terminar te aviso > >>> > >>> > >>> > >>> > >>> Em 21 de fevereiro de 2011 10:32, Daian Conrad <da...@op... > >escreveu: > >>> > >>> -----BEGIN PGP SIGNED MESSAGE----- > >>>> Hash: SHA1 > >>>> > >>>> Te aconselharia o Debian, mas o Ububtu é derivado , então jah serve, > >>>> instala o mais básico que puder, depois precisa instalar mais alguns > >>>> pacotes, tftpd, dhcp3-server e o restante que for preciso vemos > durante > >>>> o processo. > >>>> > >>>> depois disso vamos seguir os passos do outro email que passei ok > >>>> > >>>> []s > >>>> > >>>> > >>>> Em 21-02-2011 10:17, Myke Lima escreveu: > >>>>> Não tem problema, se você me ajudar faço em linux... vou fazer o > >>>> seguinte > >>>>> vou formatar novamente a maquina aqui e começar do zero, qual melhor > >>>>> distribuição pra instalar, estou instalando o Ubuntu 10.04 pode ser > ela > >>>>> mesma? > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> Em 21 de fevereiro de 2011 10:17, Daian Conrad <da...@op... > >>>>> escreveu: > >>>>> > >>>>> Bom, com windows(urrgggg), sei que tem gente que faz, eu infelizmente > >>>> só > >>>>> posso lhe ajudar se tiver isso em um server linux :). > >>>>> > >>>>> > >>>>> Mas acredito que seja parecido(o serviço), o servidor dhcp deve ter > as > >>>>> intruções para TFTP(File Transfer) e/ou apontar para um server que > >>>> tenha > >>>>> esse serviço, no caso do dhcp ser no windows, não tenho conecimento > >>>>> sobre as instruções do PXE, mas acredito que deva ter tambem. > >>>>> > >>>>> > >>>>> []s > >>>>> > >>>>> > >>>>> Em 21-02-2011 09:58, Myke Lima escreveu: > >>>>>>>> eu parei nessa parte aqui > >>>>>>>> > >>>>>>>> > >>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que > >>>> voce > >>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os > parâmetros > >>>> para > >>>>>>>> o PXE. > >>>>>>>> > >>>>>>>> > >>>>>>>> tenho um servidor DHCP windows que poderia ser usado, mas e esse > >>>> tftp que > >>>>> eu > >>>>>>>> não sei... pode ser windows tb ou linux > >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad < > da...@op... > >>>>>>>> escreveu: > >>>>>>>> > >>>>>>>> Bom dia Myke, > >>>>>>>> > >>>>>>>> Em que parte voce esta tendo problemas , os clientes iniciam ?? > >>>> aparece > >>>>>>>> algum erro ??? > >>>>>>>> > >>>>>>>> > >>>>>>>> Não tenho nenhum passo a passo, mas acho que no site tem algumas > >>>>>>>> documentações. > >>>>>>>> > >>>>>>>> Mass, segue uma rápida descrição do processo . . . > >>>>>>>> > >>>>>>>> > >>>>>>>> * - Ter um linux instalado em uma maquina (que vai servir de > server) > >>>>>>>> > >>>>>>>> * - Baixar o source do thinstation em > >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>> > >>>> > http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download > >>>>>>>> > >>>>>>>> * - Configurar as opções no arquivo build.conf e thinstation.conf > >>>>>>>> > >>>>>>>> ___ Isso pode ser bem complexo dependendo da solução que queira > >>>>>>>> disponibilizar para os clientes, porem, existem diversos exemplos > de > >>>>>>>> configuração no proprio arquivo. > >>>>>>>> > >>>>>>>> BUILD.CONF - este arquivo contem as configurações de kernel e > >>>> sistema > >>>>>>>> operacional que sera disponibilizado para os usuários. > >>>>>>>> > >>>>>>>> > >>>>>>>> THINSTATION.CONF - este arquivo, contem informações e > configurações > >>>>>>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: > >>>> rdesktop, > >>>>>>>> Xnext, ssh, telnet e afins) > >>>>>>>> > >>>>>>>> > >>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp que > >>>> voce > >>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os > parâmetros > >>>> para > >>>>>>>> o PXE. > >>>>>>>> > >>>>>>>> > >>>>>>>> Depois disso, as estações jah estarão habilitadas a iniciar na > rede, > >>>>>>>> lembrando que ajustes podem ser necessários para ambientes mais > >>>>>>>> complexos, no seu caso, para iniciar somente o rdesktop, em teoria > é > >>>>>>>> tranquilo. > >>>>>>>> > >>>>>>>> > >>>>>>>> Qualquer coisa posta os erros aqui na lista, e não desiste não, > >>>>>>>> lembre-se . . . > >>>>>>>> > >>>>>>>> o caminho e cheio de pedras, e se voce não tirá-las da sua frente, > >>>>>>>> sempre terá o dedão machucado ;-) . > >>>>>>>> > >>>>>>>> > >>>>>>>> []s > >>>>>>>> > >>>>>>>> > >>>>>>>> Em 21-02-2011 08:07, Myke Lima escreveu: > >>>>>>>>>>> bom dia pessoal, > >>>>>>>>>>> > >>>>>>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra alguem > >>>> me > >>>>> ajudar > >>>>>>>> ou > >>>>>>>>>>> fazer um passo-a-passo pra eu conseguir colocar os thinclients > >>>> aqui > >>>>> pra > >>>>>>>> dar > >>>>>>>>>>> boot via PXE e conectar no ts 2008 r2. > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> desde já agradeço. > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>> > >>>>> > >>>> > ------------------------------------------------------------------------------ > >>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel > >>>> Studio > >>>>> XE: > >>>>>>>>>>> Pinpoint memory and threading errors before they happen. > >>>>>>>>>>> Find and fix more than 250 security defects in the development > >>>> cycle. > >>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit > >>>> performance. > >>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> _______________________________________________ > >>>>>>>>>>> Thinstation-portuguese mailing list > >>>>>>>>>>> Thi...@li... > >>>>>>>>>>> > >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>> - > >>>>> > >>>>> > >>>> > ------------------------------------------------------------------------------ > >>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio > >>>> XE: > >>>>> Pinpoint memory and threading errors before they happen. > >>>>> Find and fix more than 250 security defects in the development cycle. > >>>>> Locate bottlenecks in serial and parallel code that limit > performance. > >>>>> http://p.sf.net/sfu/intel-dev2devfeb > >>>>> _______________________________________________ > >>>>> Thinstation-portuguese mailing list > >>>>> Thi...@li... > >>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >>>>>>>>> > >>>>> > >>>>>> > >>>>>> > >>>> - > >>>> > >>>> > ------------------------------------------------------------------------------ > >>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio > XE: > >>>> Pinpoint memory and threading errors before they happen. > >>>> Find and fix more than 250 security defects in the development cycle. > >>>> Locate bottlenecks in serial and parallel code that limit performance. > >>>> http://p.sf.net/sfu/intel-dev2devfeb > >>>> _______________________________________________ > >>>> Thinstation-portuguese mailing list > >>>> Thi...@li... > >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >>>>>> > >>>> > >>>> - -- > >>>> ======================= > >>>> *** Daian Conrad > >>>> > >>>> Linux user: #248912 > >>>> PGP/GPG: 0x7E25E948 > >>>> > >>>> ** OpenS Team (DaCoD) > >>>> E-mail: da...@op... > >>>> Fone: +55 48 3954-8000 > >>>> > >>>> -----BEGIN PGP SIGNATURE----- > >>>> Version: GnuPG v1.4.10 (GNU/Linux) > >>>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > >>>> > >>>> iQEcBAEBAgAGBQJNYml6AAoJEKPh7Uh+JelIeKgH/jGlQABkLUA5yXRkpe0Xn06U > >>>> 5rXu6ljMIN8x/l2LHRTl+IulG4cjouItp12y2grUuCCgtIRsrWzt08TUjWQD5Z4A > >>>> 1d9ZiIUqXb2a6K1NJbaGqPzN5tBua+bhLi5P//zrsyYj1s5NAJQHjXqe2NHlGPb7 > >>>> cfHHZiUqmxROPcV++LrPj7k16lSG501F3DgZeoXU9PKTtMoSI1856gwk+iCmoDOY > >>>> WJOW7yH9QYV4iU+jwObx5gdesIWUo8E90wSzVsgAc+gXR0aLPt1hcOm+IN1UHv55 > >>>> fa8S6Qz0QfbffbNAP1gYgNz4GuWZgs3MMJIugJ00pAFjNFQnr2obULyJAAkotpM= > >>>> =u7Cx > >>>> -----END PGP SIGNATURE----- > >>>> > >>>> > >>>> > ------------------------------------------------------------------------------ > >>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio > XE: > >>>> Pinpoint memory and threading errors before they happen. > >>>> Find and fix more than 250 security defects in the development cycle. > >>>> Locate bottlenecks in serial and parallel code that limit performance. > >>>> http://p.sf.net/sfu/intel-dev2devfeb > >>>> _______________________________________________ > >>>> Thinstation-portuguese mailing list > >>>> Thi...@li... > >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >>>> > >>> > >>> > >> > > > > - -- > ======================= > *** Daian Conrad > > Linux user: #248912 > PGP/GPG: 0x7E25E948 > > ** OpenS Team (DaCoD) > E-mail: da...@op... > Fone: +55 48 3954-8000 > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.10 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iQEcBAEBAgAGBQJNYsTnAAoJEKPh7Uh+JelIhu4IAJ5SRU4ORaBmTK8coJWFTrhx > kvb1LwU41Khv0Fg/Juq6TUxM/t96VaQvXpqiN2Ch/dFahiHgXvmxG2bv1xRMhSTA > y9dsFuKpb59mV+N4lDkhgaFjn6Xiajww4ikXu3sKgmorWVJiUS3jXJcZkSrdImq/ > PPIvh6TTIomVCWP5zpx3aYRFjINKvwiHWtxs69bGuW/Iy4ifqUHsVwZxokRHsPRm > hhKAGGBFUNzrLMnu4zrvvmbWKRZCLu5WjLWCHVGCAT812SoihnvHBAyGDBvYaMCw > UfzSzHS1wcnui3/B83NayfKPh05xR4qGYeha4XsfztwIKXzgamM+VYW1zFnG01Y= > =c+1z > -----END PGP SIGNATURE----- > > > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > |
From: Myke L. <cm...@gm...> - 2011-02-22 11:55:52
|
Instalei o DHCP3 mas não inicializa da erro meu arquivo dhcpd.conf ficou assim esse é o caminho em que se encontra o arquivo /etc/dhcp3/dhcpd.conf # # Sample configuration file for ISC dhcpd for Debian # # Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as # configuration file instead of this file. # # $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $ # # The ddns-updates-style parameter controls whether or not the server will # attempt to do a DNS update when a lease is confirmed. We default to the # behavior of the version 2 packages ('none', since DHCP v2 didn't # have support for DDNS.) ddns-update-style none; default-lease-time 21600; max-lease-time 43200; autoritative; subnet 10.1.1.0 netmask 255.255.255.0 { range 10.1.1.10 10.1.1.14; option routers 10.1.1.1; option domain-name-servers 10.10.1.252, 10.10.1.254; option broadcast-address 10.1.1.255; } # If this DHCP server is the official DHCP server for the local # network, the authoritative directive should be uncommented. #authoritative; # Use this to send dhcp log messages to a different log file (you also # have to hack syslog.conf to complete the redirection). ##log-facility local7; # No service will be given on this subnet, but declaring it helps the # DHCP server to understand the network topology. #subnet 10.152.187.0 netmask 255.255.255.0 { #} # This is a very basic subnet declaration. #subnet 10.254.239.0 netmask 255.255.255.224 { # range 10.254.239.10 10.254.239.20; # option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; #} # This declaration allows BOOTP clients to get dynamic addresses, # which we don't really recommend. #subnet 10.254.239.32 netmask 255.255.255.224 { # range dynamic-bootp 10.254.239.40 10.254.239.60; # option broadcast-address 10.254.239.31; # option routers rtr-239-32-1.example.org; #} # A slightly different configuration for an internal subnet. #subnet 10.5.5.0 netmask 255.255.255.224 { # range 10.5.5.26 10.5.5.30; # option domain-name-servers ns1.internal.example.org; # option domain-name "internal.example.org"; # option routers 10.5.5.1; # option broadcast-address 10.5.5.31; # default-lease-time 600; # max-lease-time 7200; #} # Hosts which require special configuration options can be listed in # host statements. If no address is specified, the address will be # allocated dynamically (if possible), but the host-specific information # will still come from the host declaration. #host passacaglia { # hardware ethernet 0:0:c0:5d:bd:95; # filename "vmunix.passacaglia"; # server-name "toccata.fugue.com"; #} # Fixed IP addresses can also be specified for hosts. These addresses # should not also be listed as being available for dynamic assignment. # Hosts for which fixed IP addresses have been specified can boot using # BOOTP or DHCP. Hosts for which no fixed address is specified can only # be booted with DHCP, unless there is an address range on the subnet # to which a BOOTP client is connected which has the dynamic-bootp flag # set. #host fantasia { # hardware ethernet 08:00:07:26:c0:a5; # fixed-address fantasia.fugue.com; #} # You can declare a class of clients and then do address allocation # based on that. The example below shows a case where all clients # in a certain class get addresses on the 10.17.224/24 subnet, and all # other clients get addresses on the 10.0.29/24 subnet. #class "foo" { # match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; #} #shared-network 224-29 { # subnet 10.17.224.0 netmask 255.255.255.0 { # option routers rtr-224.example.org; # } # subnet 10.0.29.0 netmask 255.255.255.0 { # option routers rtr-29.example.org; # } # pool { # allow members of "foo"; # range 10.17.224.10 10.17.224.250; # } # pool { # deny members of "foo"; # range 10.0.29.10 10.0.29.230; # } #} o que esta errado???? Em 21 de fevereiro de 2011 17:58, Myke Lima <cm...@gm...> escreveu: > Ok, imagem gerada sem problemas, agora falta o dhcp e o tftp > > Em 21 de fevereiro de 2011 17:02, Daian Conrad <da...@op...>escreveu: > > -----BEGIN PGP SIGNED MESSAGE----- >> Hash: SHA1 >> >> Os arquivos parecem estar corretos, faltando somente, compilar a imagem, >> ver se vai criar certinho e conferir a configuração do serviço tftp e do >> dhcp. >> >> []s >> >> >> Em 21-02-2011 14:59, Myke Lima escreveu: >> > Deem uma olhada nos meus arquivos de conf, para ver se ta tudo ok. antes >> de >> > eu gerar o ./build >> > >> > lembrando que meus Thinclients são exatamente esses modelos aqui: >> > http://www.connec.com.br/site/p01b1.asp >> > >> > somente boot PXE e quero carregalos no ts do 2008 r2 >> > >> > >> > >> > >> > >> > >> > Em 21 de fevereiro de 2011 14:25, Myke Lima <cm...@gm...> >> escreveu: >> > >> >> Qual diretório fica melhor para extrair o pacote >> >> Thinstation-2.2.2f.tar.bz2? >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> Em 21 de fevereiro de 2011 10:31, Myke Lima <cm...@gm...> >> escreveu: >> >> >> >> ok, pode deixar, qnd terminar te aviso >> >>> >> >>> >> >>> >> >>> >> >>> Em 21 de fevereiro de 2011 10:32, Daian Conrad <da...@op... >> >escreveu: >> >>> >> >>> -----BEGIN PGP SIGNED MESSAGE----- >> >>>> Hash: SHA1 >> >>>> >> >>>> Te aconselharia o Debian, mas o Ububtu é derivado , então jah serve, >> >>>> instala o mais básico que puder, depois precisa instalar mais alguns >> >>>> pacotes, tftpd, dhcp3-server e o restante que for preciso vemos >> durante >> >>>> o processo. >> >>>> >> >>>> depois disso vamos seguir os passos do outro email que passei ok >> >>>> >> >>>> []s >> >>>> >> >>>> >> >>>> Em 21-02-2011 10:17, Myke Lima escreveu: >> >>>>> Não tem problema, se você me ajudar faço em linux... vou fazer o >> >>>> seguinte >> >>>>> vou formatar novamente a maquina aqui e começar do zero, qual melhor >> >>>>> distribuição pra instalar, estou instalando o Ubuntu 10.04 pode ser >> ela >> >>>>> mesma? >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> Em 21 de fevereiro de 2011 10:17, Daian Conrad <da...@op... >> >>>>> escreveu: >> >>>>> >> >>>>> Bom, com windows(urrgggg), sei que tem gente que faz, eu >> infelizmente >> >>>> só >> >>>>> posso lhe ajudar se tiver isso em um server linux :). >> >>>>> >> >>>>> >> >>>>> Mas acredito que seja parecido(o serviço), o servidor dhcp deve ter >> as >> >>>>> intruções para TFTP(File Transfer) e/ou apontar para um server que >> >>>> tenha >> >>>>> esse serviço, no caso do dhcp ser no windows, não tenho conecimento >> >>>>> sobre as instruções do PXE, mas acredito que deva ter tambem. >> >>>>> >> >>>>> >> >>>>> []s >> >>>>> >> >>>>> >> >>>>> Em 21-02-2011 09:58, Myke Lima escreveu: >> >>>>>>>> eu parei nessa parte aqui >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp >> que >> >>>> voce >> >>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >> parâmetros >> >>>> para >> >>>>>>>> o PXE. >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> tenho um servidor DHCP windows que poderia ser usado, mas e esse >> >>>> tftp que >> >>>>> eu >> >>>>>>>> não sei... pode ser windows tb ou linux >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad < >> da...@op... >> >>>>>>>> escreveu: >> >>>>>>>> >> >>>>>>>> Bom dia Myke, >> >>>>>>>> >> >>>>>>>> Em que parte voce esta tendo problemas , os clientes iniciam ?? >> >>>> aparece >> >>>>>>>> algum erro ??? >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> Não tenho nenhum passo a passo, mas acho que no site tem algumas >> >>>>>>>> documentações. >> >>>>>>>> >> >>>>>>>> Mass, segue uma rápida descrição do processo . . . >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> * - Ter um linux instalado em uma maquina (que vai servir de >> server) >> >>>>>>>> >> >>>>>>>> * - Baixar o source do thinstation em >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> >> >>>>> >> >>>> >> http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download >> >>>>>>>> >> >>>>>>>> * - Configurar as opções no arquivo build.conf e thinstation.conf >> >>>>>>>> >> >>>>>>>> ___ Isso pode ser bem complexo dependendo da solução que queira >> >>>>>>>> disponibilizar para os clientes, porem, existem diversos exemplos >> de >> >>>>>>>> configuração no proprio arquivo. >> >>>>>>>> >> >>>>>>>> BUILD.CONF - este arquivo contem as configurações de kernel e >> >>>> sistema >> >>>>>>>> operacional que sera disponibilizado para os usuários. >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> THINSTATION.CONF - este arquivo, contem informações e >> configurações >> >>>>>>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: >> >>>> rdesktop, >> >>>>>>>> Xnext, ssh, telnet e afins) >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp >> que >> >>>> voce >> >>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >> parâmetros >> >>>> para >> >>>>>>>> o PXE. >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> Depois disso, as estações jah estarão habilitadas a iniciar na >> rede, >> >>>>>>>> lembrando que ajustes podem ser necessários para ambientes mais >> >>>>>>>> complexos, no seu caso, para iniciar somente o rdesktop, em >> teoria é >> >>>>>>>> tranquilo. >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> Qualquer coisa posta os erros aqui na lista, e não desiste não, >> >>>>>>>> lembre-se . . . >> >>>>>>>> >> >>>>>>>> o caminho e cheio de pedras, e se voce não tirá-las da sua >> frente, >> >>>>>>>> sempre terá o dedão machucado ;-) . >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> []s >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> Em 21-02-2011 08:07, Myke Lima escreveu: >> >>>>>>>>>>> bom dia pessoal, >> >>>>>>>>>>> >> >>>>>>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra >> alguem >> >>>> me >> >>>>> ajudar >> >>>>>>>> ou >> >>>>>>>>>>> fazer um passo-a-passo pra eu conseguir colocar os thinclients >> >>>> aqui >> >>>>> pra >> >>>>>>>> dar >> >>>>>>>>>>> boot via PXE e conectar no ts 2008 r2. >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> desde já agradeço. >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>> >> >>>>> >> >>>> >> ------------------------------------------------------------------------------ >> >>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >> >>>> Studio >> >>>>> XE: >> >>>>>>>>>>> Pinpoint memory and threading errors before they happen. >> >>>>>>>>>>> Find and fix more than 250 security defects in the development >> >>>> cycle. >> >>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >> >>>> performance. >> >>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> _______________________________________________ >> >>>>>>>>>>> Thinstation-portuguese mailing list >> >>>>>>>>>>> Thi...@li... >> >>>>>>>>>>> >> >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> >>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> >>>>> - >> >>>>> >> >>>>> >> >>>> >> ------------------------------------------------------------------------------ >> >>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >> Studio >> >>>> XE: >> >>>>> Pinpoint memory and threading errors before they happen. >> >>>>> Find and fix more than 250 security defects in the development >> cycle. >> >>>>> Locate bottlenecks in serial and parallel code that limit >> performance. >> >>>>> http://p.sf.net/sfu/intel-dev2devfeb >> >>>>> _______________________________________________ >> >>>>> Thinstation-portuguese mailing list >> >>>>> Thi...@li... >> >>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> >>>>>>>>> >> >>>>> >> >>>>>> >> >>>>>> >> >>>> - >> >>>> >> >>>> >> ------------------------------------------------------------------------------ >> >>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio >> XE: >> >>>> Pinpoint memory and threading errors before they happen. >> >>>> Find and fix more than 250 security defects in the development cycle. >> >>>> Locate bottlenecks in serial and parallel code that limit >> performance. >> >>>> http://p.sf.net/sfu/intel-dev2devfeb >> >>>> _______________________________________________ >> >>>> Thinstation-portuguese mailing list >> >>>> Thi...@li... >> >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> >>>>>> >> >>>> >> >>>> - -- >> >>>> ======================= >> >>>> *** Daian Conrad >> >>>> >> >>>> Linux user: #248912 >> >>>> PGP/GPG: 0x7E25E948 >> >>>> >> >>>> ** OpenS Team (DaCoD) >> >>>> E-mail: da...@op... >> >>>> Fone: +55 48 3954-8000 >> >>>> >> >>>> -----BEGIN PGP SIGNATURE----- >> >>>> Version: GnuPG v1.4.10 (GNU/Linux) >> >>>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ >> >>>> >> >>>> iQEcBAEBAgAGBQJNYml6AAoJEKPh7Uh+JelIeKgH/jGlQABkLUA5yXRkpe0Xn06U >> >>>> 5rXu6ljMIN8x/l2LHRTl+IulG4cjouItp12y2grUuCCgtIRsrWzt08TUjWQD5Z4A >> >>>> 1d9ZiIUqXb2a6K1NJbaGqPzN5tBua+bhLi5P//zrsyYj1s5NAJQHjXqe2NHlGPb7 >> >>>> cfHHZiUqmxROPcV++LrPj7k16lSG501F3DgZeoXU9PKTtMoSI1856gwk+iCmoDOY >> >>>> WJOW7yH9QYV4iU+jwObx5gdesIWUo8E90wSzVsgAc+gXR0aLPt1hcOm+IN1UHv55 >> >>>> fa8S6Qz0QfbffbNAP1gYgNz4GuWZgs3MMJIugJ00pAFjNFQnr2obULyJAAkotpM= >> >>>> =u7Cx >> >>>> -----END PGP SIGNATURE----- >> >>>> >> >>>> >> >>>> >> ------------------------------------------------------------------------------ >> >>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio >> XE: >> >>>> Pinpoint memory and threading errors before they happen. >> >>>> Find and fix more than 250 security defects in the development cycle. >> >>>> Locate bottlenecks in serial and parallel code that limit >> performance. >> >>>> http://p.sf.net/sfu/intel-dev2devfeb >> >>>> _______________________________________________ >> >>>> Thinstation-portuguese mailing list >> >>>> Thi...@li... >> >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> >>>> >> >>> >> >>> >> >> >> > >> >> - -- >> ======================= >> *** Daian Conrad >> >> Linux user: #248912 >> PGP/GPG: 0x7E25E948 >> >> ** OpenS Team (DaCoD) >> E-mail: da...@op... >> Fone: +55 48 3954-8000 >> >> -----BEGIN PGP SIGNATURE----- >> Version: GnuPG v1.4.10 (GNU/Linux) >> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ >> >> iQEcBAEBAgAGBQJNYsTnAAoJEKPh7Uh+JelIhu4IAJ5SRU4ORaBmTK8coJWFTrhx >> kvb1LwU41Khv0Fg/Juq6TUxM/t96VaQvXpqiN2Ch/dFahiHgXvmxG2bv1xRMhSTA >> y9dsFuKpb59mV+N4lDkhgaFjn6Xiajww4ikXu3sKgmorWVJiUS3jXJcZkSrdImq/ >> PPIvh6TTIomVCWP5zpx3aYRFjINKvwiHWtxs69bGuW/Iy4ifqUHsVwZxokRHsPRm >> hhKAGGBFUNzrLMnu4zrvvmbWKRZCLu5WjLWCHVGCAT812SoihnvHBAyGDBvYaMCw >> UfzSzHS1wcnui3/B83NayfKPh05xR4qGYeha4XsfztwIKXzgamM+VYW1zFnG01Y= >> =c+1z >> -----END PGP SIGNATURE----- >> >> >> ------------------------------------------------------------------------------ >> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: >> Pinpoint memory and threading errors before they happen. >> Find and fix more than 250 security defects in the development cycle. >> Locate bottlenecks in serial and parallel code that limit performance. >> http://p.sf.net/sfu/intel-dev2devfeb >> _______________________________________________ >> Thinstation-portuguese mailing list >> Thi...@li... >> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> > > |
From: Daian C. <da...@op...> - 2011-02-22 13:57:54
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Parece estar ok, adicionou a interface em /etc/default/dhcp3-server ? qual o log que aparece no syslog/daemon.log ? a placa de rede esta na mesma rede ? []s Em 22-02-2011 08:55, Myke Lima escreveu: > Instalei o DHCP3 mas não inicializa da erro meu arquivo dhcpd.conf ficou > assim > > > esse é o caminho em que se encontra o arquivo /etc/dhcp3/dhcpd.conf > > > # > # Sample configuration file for ISC dhcpd for Debian > # > # Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as > # configuration file instead of this file. > # > # $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $ > # > > # The ddns-updates-style parameter controls whether or not the server will > # attempt to do a DNS update when a lease is confirmed. We default to the > # behavior of the version 2 packages ('none', since DHCP v2 didn't > # have support for DDNS.) > > ddns-update-style none; > default-lease-time 21600; > max-lease-time 43200; > autoritative; > > subnet 10.1.1.0 netmask 255.255.255.0 { > range 10.1.1.10 10.1.1.14; > option routers 10.1.1.1; > option domain-name-servers 10.10.1.252, 10.10.1.254; > option broadcast-address 10.1.1.255; > } > > # If this DHCP server is the official DHCP server for the local > # network, the authoritative directive should be uncommented. > #authoritative; > > # Use this to send dhcp log messages to a different log file (you also > # have to hack syslog.conf to complete the redirection). > ##log-facility local7; > > # No service will be given on this subnet, but declaring it helps the > # DHCP server to understand the network topology. > > #subnet 10.152.187.0 netmask 255.255.255.0 { > #} > > # This is a very basic subnet declaration. > > #subnet 10.254.239.0 netmask 255.255.255.224 { > # range 10.254.239.10 10.254.239.20; > # option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; > #} > > # This declaration allows BOOTP clients to get dynamic addresses, > # which we don't really recommend. > > #subnet 10.254.239.32 netmask 255.255.255.224 { > # range dynamic-bootp 10.254.239.40 10.254.239.60; > # option broadcast-address 10.254.239.31; > # option routers rtr-239-32-1.example.org; > #} > > # A slightly different configuration for an internal subnet. > #subnet 10.5.5.0 netmask 255.255.255.224 { > # range 10.5.5.26 10.5.5.30; > # option domain-name-servers ns1.internal.example.org; > # option domain-name "internal.example.org"; > # option routers 10.5.5.1; > # option broadcast-address 10.5.5.31; > # default-lease-time 600; > # max-lease-time 7200; > #} > > # Hosts which require special configuration options can be listed in > # host statements. If no address is specified, the address will be > # allocated dynamically (if possible), but the host-specific information > # will still come from the host declaration. > > #host passacaglia { > # hardware ethernet 0:0:c0:5d:bd:95; > # filename "vmunix.passacaglia"; > # server-name "toccata.fugue.com"; > #} > > # Fixed IP addresses can also be specified for hosts. These addresses > # should not also be listed as being available for dynamic assignment. > # Hosts for which fixed IP addresses have been specified can boot using > # BOOTP or DHCP. Hosts for which no fixed address is specified can only > # be booted with DHCP, unless there is an address range on the subnet > # to which a BOOTP client is connected which has the dynamic-bootp flag > # set. > #host fantasia { > # hardware ethernet 08:00:07:26:c0:a5; > # fixed-address fantasia.fugue.com; > #} > > # You can declare a class of clients and then do address allocation > # based on that. The example below shows a case where all clients > # in a certain class get addresses on the 10.17.224/24 subnet, and all > # other clients get addresses on the 10.0.29/24 subnet. > > #class "foo" { > # match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; > #} > > #shared-network 224-29 { > # subnet 10.17.224.0 netmask 255.255.255.0 { > # option routers rtr-224.example.org; > # } > # subnet 10.0.29.0 netmask 255.255.255.0 { > # option routers rtr-29.example.org; > # } > # pool { > # allow members of "foo"; > # range 10.17.224.10 10.17.224.250; > # } > # pool { > # deny members of "foo"; > # range 10.0.29.10 10.0.29.230; > # } > #} > > > o que esta errado???? > > > > > > > > > Em 21 de fevereiro de 2011 17:58, Myke Lima <cm...@gm...> escreveu: > >> Ok, imagem gerada sem problemas, agora falta o dhcp e o tftp >> >> Em 21 de fevereiro de 2011 17:02, Daian Conrad <da...@op...>escreveu: >> >> -----BEGIN PGP SIGNED MESSAGE----- >>> Hash: SHA1 >>> >>> Os arquivos parecem estar corretos, faltando somente, compilar a imagem, >>> ver se vai criar certinho e conferir a configuração do serviço tftp e do >>> dhcp. >>> >>> []s >>> >>> >>> Em 21-02-2011 14:59, Myke Lima escreveu: >>>> Deem uma olhada nos meus arquivos de conf, para ver se ta tudo ok. antes >>> de >>>> eu gerar o ./build >>>> >>>> lembrando que meus Thinclients são exatamente esses modelos aqui: >>>> http://www.connec.com.br/site/p01b1.asp >>>> >>>> somente boot PXE e quero carregalos no ts do 2008 r2 >>>> >>>> >>>> >>>> >>>> >>>> >>>> Em 21 de fevereiro de 2011 14:25, Myke Lima <cm...@gm...> >>> escreveu: >>>> >>>>> Qual diretório fica melhor para extrair o pacote >>>>> Thinstation-2.2.2f.tar.bz2? >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Em 21 de fevereiro de 2011 10:31, Myke Lima <cm...@gm...> >>> escreveu: >>>>> >>>>> ok, pode deixar, qnd terminar te aviso >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Em 21 de fevereiro de 2011 10:32, Daian Conrad <da...@op... >>>> escreveu: >>>>>> >>>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>>> Hash: SHA1 >>>>>>> >>>>>>> Te aconselharia o Debian, mas o Ububtu é derivado , então jah serve, >>>>>>> instala o mais básico que puder, depois precisa instalar mais alguns >>>>>>> pacotes, tftpd, dhcp3-server e o restante que for preciso vemos >>> durante >>>>>>> o processo. >>>>>>> >>>>>>> depois disso vamos seguir os passos do outro email que passei ok >>>>>>> >>>>>>> []s >>>>>>> >>>>>>> >>>>>>> Em 21-02-2011 10:17, Myke Lima escreveu: >>>>>>>> Não tem problema, se você me ajudar faço em linux... vou fazer o >>>>>>> seguinte >>>>>>>> vou formatar novamente a maquina aqui e começar do zero, qual melhor >>>>>>>> distribuição pra instalar, estou instalando o Ubuntu 10.04 pode ser >>> ela >>>>>>>> mesma? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Em 21 de fevereiro de 2011 10:17, Daian Conrad <da...@op... >>>>>>>> escreveu: >>>>>>>> >>>>>>>> Bom, com windows(urrgggg), sei que tem gente que faz, eu >>> infelizmente >>>>>>> só >>>>>>>> posso lhe ajudar se tiver isso em um server linux :). >>>>>>>> >>>>>>>> >>>>>>>> Mas acredito que seja parecido(o serviço), o servidor dhcp deve ter >>> as >>>>>>>> intruções para TFTP(File Transfer) e/ou apontar para um server que >>>>>>> tenha >>>>>>>> esse serviço, no caso do dhcp ser no windows, não tenho conecimento >>>>>>>> sobre as instruções do PXE, mas acredito que deva ter tambem. >>>>>>>> >>>>>>>> >>>>>>>> []s >>>>>>>> >>>>>>>> >>>>>>>> Em 21-02-2011 09:58, Myke Lima escreveu: >>>>>>>>>>> eu parei nessa parte aqui >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp >>> que >>>>>>> voce >>>>>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >>> parâmetros >>>>>>> para >>>>>>>>>>> o PXE. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> tenho um servidor DHCP windows que poderia ser usado, mas e esse >>>>>>> tftp que >>>>>>>> eu >>>>>>>>>>> não sei... pode ser windows tb ou linux >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad < >>> da...@op... >>>>>>>>>>> escreveu: >>>>>>>>>>> >>>>>>>>>>> Bom dia Myke, >>>>>>>>>>> >>>>>>>>>>> Em que parte voce esta tendo problemas , os clientes iniciam ?? >>>>>>> aparece >>>>>>>>>>> algum erro ??? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Não tenho nenhum passo a passo, mas acho que no site tem algumas >>>>>>>>>>> documentações. >>>>>>>>>>> >>>>>>>>>>> Mass, segue uma rápida descrição do processo . . . >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> * - Ter um linux instalado em uma maquina (que vai servir de >>> server) >>>>>>>>>>> >>>>>>>>>>> * - Baixar o source do thinstation em >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>> >>>>>>> >>> http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download >>>>>>>>>>> >>>>>>>>>>> * - Configurar as opções no arquivo build.conf e thinstation.conf >>>>>>>>>>> >>>>>>>>>>> ___ Isso pode ser bem complexo dependendo da solução que queira >>>>>>>>>>> disponibilizar para os clientes, porem, existem diversos exemplos >>> de >>>>>>>>>>> configuração no proprio arquivo. >>>>>>>>>>> >>>>>>>>>>> BUILD.CONF - este arquivo contem as configurações de kernel e >>>>>>> sistema >>>>>>>>>>> operacional que sera disponibilizado para os usuários. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> THINSTATION.CONF - este arquivo, contem informações e >>> configurações >>>>>>>>>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: >>>>>>> rdesktop, >>>>>>>>>>> Xnext, ssh, telnet e afins) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp >>> que >>>>>>> voce >>>>>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >>> parâmetros >>>>>>> para >>>>>>>>>>> o PXE. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Depois disso, as estações jah estarão habilitadas a iniciar na >>> rede, >>>>>>>>>>> lembrando que ajustes podem ser necessários para ambientes mais >>>>>>>>>>> complexos, no seu caso, para iniciar somente o rdesktop, em >>> teoria é >>>>>>>>>>> tranquilo. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Qualquer coisa posta os erros aqui na lista, e não desiste não, >>>>>>>>>>> lembre-se . . . >>>>>>>>>>> >>>>>>>>>>> o caminho e cheio de pedras, e se voce não tirá-las da sua >>> frente, >>>>>>>>>>> sempre terá o dedão machucado ;-) . >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> []s >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Em 21-02-2011 08:07, Myke Lima escreveu: >>>>>>>>>>>>>> bom dia pessoal, >>>>>>>>>>>>>> >>>>>>>>>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra >>> alguem >>>>>>> me >>>>>>>> ajudar >>>>>>>>>>> ou >>>>>>>>>>>>>> fazer um passo-a-passo pra eu conseguir colocar os thinclients >>>>>>> aqui >>>>>>>> pra >>>>>>>>>>> dar >>>>>>>>>>>>>> boot via PXE e conectar no ts 2008 r2. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> desde já agradeço. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>> >>>>>>> >>> ------------------------------------------------------------------------------ >>>>>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >>>>>>> Studio >>>>>>>> XE: >>>>>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>>>>> Find and fix more than 250 security defects in the development >>>>>>> cycle. >>>>>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>>> performance. >>>>>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>> >>>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>> - >>>>>>>> >>>>>>>> >>>>>>> >>> ------------------------------------------------------------------------------ >>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >>> Studio >>>>>>> XE: >>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>> Find and fix more than 250 security defects in the development >>> cycle. >>>>>>>> Locate bottlenecks in serial and parallel code that limit >>> performance. >>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>> _______________________________________________ >>>>>>>> Thinstation-portuguese mailing list >>>>>>>> Thi...@li... >>>>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>> - >>>>>>> >>>>>>> >>> ------------------------------------------------------------------------------ >>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio >>> XE: >>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>> Find and fix more than 250 security defects in the development cycle. >>>>>>> Locate bottlenecks in serial and parallel code that limit >>> performance. >>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>> _______________________________________________ >>>>>>> Thinstation-portuguese mailing list >>>>>>> Thi...@li... >>>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>> >>>>>>> >>>>>>> - -- >>>>>>> ======================= >>>>>>> *** Daian Conrad >>>>>>> >>>>>>> Linux user: #248912 >>>>>>> PGP/GPG: 0x7E25E948 >>>>>>> >>>>>>> ** OpenS Team (DaCoD) >>>>>>> E-mail: da...@op... >>>>>>> Fone: +55 48 3954-8000 >>>>>>> >>>>>>> -----BEGIN PGP SIGNATURE----- >>>>>>> Version: GnuPG v1.4.10 (GNU/Linux) >>>>>>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ >>>>>>> >>>>>>> iQEcBAEBAgAGBQJNYml6AAoJEKPh7Uh+JelIeKgH/jGlQABkLUA5yXRkpe0Xn06U >>>>>>> 5rXu6ljMIN8x/l2LHRTl+IulG4cjouItp12y2grUuCCgtIRsrWzt08TUjWQD5Z4A >>>>>>> 1d9ZiIUqXb2a6K1NJbaGqPzN5tBua+bhLi5P//zrsyYj1s5NAJQHjXqe2NHlGPb7 >>>>>>> cfHHZiUqmxROPcV++LrPj7k16lSG501F3DgZeoXU9PKTtMoSI1856gwk+iCmoDOY >>>>>>> WJOW7yH9QYV4iU+jwObx5gdesIWUo8E90wSzVsgAc+gXR0aLPt1hcOm+IN1UHv55 >>>>>>> fa8S6Qz0QfbffbNAP1gYgNz4GuWZgs3MMJIugJ00pAFjNFQnr2obULyJAAkotpM= >>>>>>> =u7Cx >>>>>>> -----END PGP SIGNATURE----- >>>>>>> >>>>>>> >>>>>>> >>> ------------------------------------------------------------------------------ >>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio >>> XE: >>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>> Find and fix more than 250 security defects in the development cycle. >>>>>>> Locate bottlenecks in serial and parallel code that limit >>> performance. >>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>> _______________________________________________ >>>>>>> Thinstation-portuguese mailing list >>>>>>> Thi...@li... >>>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >>> - -- >>> ======================= >>> *** Daian Conrad >>> >>> Linux user: #248912 >>> PGP/GPG: 0x7E25E948 >>> >>> ** OpenS Team (DaCoD) >>> E-mail: da...@op... >>> Fone: +55 48 3954-8000 >>> >>> -----BEGIN PGP SIGNATURE----- >>> Version: GnuPG v1.4.10 (GNU/Linux) >>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ >>> >>> iQEcBAEBAgAGBQJNYsTnAAoJEKPh7Uh+JelIhu4IAJ5SRU4ORaBmTK8coJWFTrhx >>> kvb1LwU41Khv0Fg/Juq6TUxM/t96VaQvXpqiN2Ch/dFahiHgXvmxG2bv1xRMhSTA >>> y9dsFuKpb59mV+N4lDkhgaFjn6Xiajww4ikXu3sKgmorWVJiUS3jXJcZkSrdImq/ >>> PPIvh6TTIomVCWP5zpx3aYRFjINKvwiHWtxs69bGuW/Iy4ifqUHsVwZxokRHsPRm >>> hhKAGGBFUNzrLMnu4zrvvmbWKRZCLu5WjLWCHVGCAT812SoihnvHBAyGDBvYaMCw >>> UfzSzHS1wcnui3/B83NayfKPh05xR4qGYeha4XsfztwIKXzgamM+VYW1zFnG01Y= >>> =c+1z >>> -----END PGP SIGNATURE----- >>> >>> >>> ------------------------------------------------------------------------------ >>> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: >>> Pinpoint memory and threading errors before they happen. >>> Find and fix more than 250 security defects in the development cycle. >>> Locate bottlenecks in serial and parallel code that limit performance. >>> http://p.sf.net/sfu/intel-dev2devfeb >>> _______________________________________________ >>> Thinstation-portuguese mailing list >>> Thi...@li... >>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>> >> >> > > > > ------------------------------------------------------------------------------ > Index, Search & Analyze Logs and other IT data in Real-Time with Splunk > Collect, index and harness all the fast moving IT data generated by your > applications, servers and devices whether physical, virtual or in the cloud. > Deliver compliance at lower cost and gain new business insights. > Free Software Download: http://p.sf.net/sfu/splunk-dev2dev > > > > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNY8GOAAoJEKPh7Uh+JelIMi0IAItq3Lvc2zjX3/epcmLUyywX BdwhAllI+FLs66X/SBMjFYDKfZK6fqVog3adMps5QJK/QdQtiYeOMhFa/+ebX1Ee DKzoAK5cKJitsEZfLKYI7QIjC072ipLPB2nNWwGL55e1U5tZuEDYfCiZmxH27zfk VJRTOOC9dP3QyVXjI8SBt6fKwkQC6CeGwJbsH77x1LGtvQTHH+X0RflrFdtMr/s1 6Y6dzFRaOwDxGH0par1OaLp8FOqqlD16jBMyHudREAMaVj+rHNqYpFyNZnYUyYA0 /KKtQ+2lLp8Wz5PCWjEKmPi8QbcoSpAPxOsvOJkDaoqk/NYJvJoYvmdJ7ShOGMQ= =Tk7u -----END PGP SIGNATURE----- |
From: Daian C. <da...@op...> - 2011-02-22 18:56:49
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 o Erro é bem claro, voce deve possuir no server dhcp , pelo menos um range com o mesmo ip do server ou da placa em questão, se for adicionar mais redes, ou voce adiciona um ip virtual a placa "eth0", ou adiciona mais um segmento de rede conectado a outra placa. Um exemplo de configuração simples segue abaixo com os dados que voce tem ai . . . #### INICIO allow booting; allow bootp; default-lease-time 2160000; max-lease-time 21600000; authoritative; subnet 10.10.1.0.0 netmask 255.255.255.0 { range 10.10.1.100 10.10..1.120; option routers 10.10.1.1 ; option domain-name-servers 10.10.1.252, 10.10.1.254; option domain-name "nome-da-rede"; next-server 10.10.1.9; option root-path "/tftpboot"; filename "boot-images/pxe/pxelinux.0"; if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; } } ##### FIM []s Em 22-02-2011 14:21, Myke Lima escreveu: > o log esta ai abaixo, bem eu nao tinha colocado a eth0 na > /etc/default/dhcp3-server > > e outra esse servidor tem o ip 10.10.1.9 pois 10.10.1.x eh a rede dos meus > servidores > > mas servira ip's 10.1.1.x que e a rede dos desktops > > > Feb 22 13:14:37 SRVDHCP dhcpd: Wrote 0 leases to leases file. > Feb 22 13:14:37 SRVDHCP dhcpd: > Feb 22 13:14:37 SRVDHCP dhcpd: No subnet declaration for eth0 (10.10.1.9). > Feb 22 13:14:37 SRVDHCP dhcpd: ** Ignoring requests on eth0. If this is not > what > Feb 22 13:14:37 SRVDHCP dhcpd: you want, please write a subnet > declaration > Feb 22 13:14:37 SRVDHCP dhcpd: in your dhcpd.conf file for the network > segment > Feb 22 13:14:37 SRVDHCP dhcpd: to which interface eth0 is attached. ** > Feb 22 13:14:37 SRVDHCP dhcpd: > Feb 22 13:14:37 SRVDHCP dhcpd: > Feb 22 13:14:37 SRVDHCP dhcpd: Not configured to listen on any interfaces! > > 2011/2/22 Daian Conrad <da...@op...> > > Parece estar ok, adicionou a interface em /etc/default/dhcp3-server ? > > > qual o log que aparece no syslog/daemon.log ? > > > a placa de rede esta na mesma rede ? > > []s > > > > Em 22-02-2011 08:55, Myke Lima escreveu: >>>> Instalei o DHCP3 mas não inicializa da erro meu arquivo dhcpd.conf ficou >>>> assim >>>> >>>> >>>> esse é o caminho em que se encontra o arquivo /etc/dhcp3/dhcpd.conf >>>> >>>> >>>> # >>>> # Sample configuration file for ISC dhcpd for Debian >>>> # >>>> # Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as >>>> # configuration file instead of this file. >>>> # >>>> # $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $ >>>> # >>>> >>>> # The ddns-updates-style parameter controls whether or not the server > will >>>> # attempt to do a DNS update when a lease is confirmed. We default to the >>>> # behavior of the version 2 packages ('none', since DHCP v2 didn't >>>> # have support for DDNS.) >>>> >>>> ddns-update-style none; >>>> default-lease-time 21600; >>>> max-lease-time 43200; >>>> autoritative; >>>> >>>> subnet 10.1.1.0 netmask 255.255.255.0 { >>>> range 10.1.1.10 10.1.1.14; >>>> option routers 10.1.1.1; >>>> option domain-name-servers 10.10.1.252, 10.10.1.254; >>>> option broadcast-address 10.1.1.255; >>>> } >>>> >>>> # If this DHCP server is the official DHCP server for the local >>>> # network, the authoritative directive should be uncommented. >>>> #authoritative; >>>> >>>> # Use this to send dhcp log messages to a different log file (you also >>>> # have to hack syslog.conf to complete the redirection). >>>> ##log-facility local7; >>>> >>>> # No service will be given on this subnet, but declaring it helps the >>>> # DHCP server to understand the network topology. >>>> >>>> #subnet 10.152.187.0 netmask 255.255.255.0 { >>>> #} >>>> >>>> # This is a very basic subnet declaration. >>>> >>>> #subnet 10.254.239.0 netmask 255.255.255.224 { >>>> # range 10.254.239.10 10.254.239.20; >>>> # option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; >>>> #} >>>> >>>> # This declaration allows BOOTP clients to get dynamic addresses, >>>> # which we don't really recommend. >>>> >>>> #subnet 10.254.239.32 netmask 255.255.255.224 { >>>> # range dynamic-bootp 10.254.239.40 10.254.239.60; >>>> # option broadcast-address 10.254.239.31; >>>> # option routers rtr-239-32-1.example.org; >>>> #} >>>> >>>> # A slightly different configuration for an internal subnet. >>>> #subnet 10.5.5.0 netmask 255.255.255.224 { >>>> # range 10.5.5.26 10.5.5.30; >>>> # option domain-name-servers ns1.internal.example.org; >>>> # option domain-name "internal.example.org"; >>>> # option routers 10.5.5.1; >>>> # option broadcast-address 10.5.5.31; >>>> # default-lease-time 600; >>>> # max-lease-time 7200; >>>> #} >>>> >>>> # Hosts which require special configuration options can be listed in >>>> # host statements. If no address is specified, the address will be >>>> # allocated dynamically (if possible), but the host-specific information >>>> # will still come from the host declaration. >>>> >>>> #host passacaglia { >>>> # hardware ethernet 0:0:c0:5d:bd:95; >>>> # filename "vmunix.passacaglia"; >>>> # server-name "toccata.fugue.com"; >>>> #} >>>> >>>> # Fixed IP addresses can also be specified for hosts. These addresses >>>> # should not also be listed as being available for dynamic assignment. >>>> # Hosts for which fixed IP addresses have been specified can boot using >>>> # BOOTP or DHCP. Hosts for which no fixed address is specified can only >>>> # be booted with DHCP, unless there is an address range on the subnet >>>> # to which a BOOTP client is connected which has the dynamic-bootp flag >>>> # set. >>>> #host fantasia { >>>> # hardware ethernet 08:00:07:26:c0:a5; >>>> # fixed-address fantasia.fugue.com; >>>> #} >>>> >>>> # You can declare a class of clients and then do address allocation >>>> # based on that. The example below shows a case where all clients >>>> # in a certain class get addresses on the 10.17.224/24 subnet, and all >>>> # other clients get addresses on the 10.0.29/24 subnet. >>>> >>>> #class "foo" { >>>> # match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; >>>> #} >>>> >>>> #shared-network 224-29 { >>>> # subnet 10.17.224.0 netmask 255.255.255.0 { >>>> # option routers rtr-224.example.org; >>>> # } >>>> # subnet 10.0.29.0 netmask 255.255.255.0 { >>>> # option routers rtr-29.example.org; >>>> # } >>>> # pool { >>>> # allow members of "foo"; >>>> # range 10.17.224.10 10.17.224.250; >>>> # } >>>> # pool { >>>> # deny members of "foo"; >>>> # range 10.0.29.10 10.0.29.230; >>>> # } >>>> #} >>>> >>>> >>>> o que esta errado???? >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Em 21 de fevereiro de 2011 17:58, Myke Lima <cm...@gm...> > escreveu: >>>> >>>>> Ok, imagem gerada sem problemas, agora falta o dhcp e o tftp >>>>> >>>>> Em 21 de fevereiro de 2011 17:02, Daian Conrad <da...@op... >>>> escreveu: >>>>> >>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>> Hash: SHA1 >>>>>> >>>>>> Os arquivos parecem estar corretos, faltando somente, compilar a > imagem, >>>>>> ver se vai criar certinho e conferir a configuração do serviço tftp e > do >>>>>> dhcp. >>>>>> >>>>>> []s >>>>>> >>>>>> >>>>>> Em 21-02-2011 14:59, Myke Lima escreveu: >>>>>>> Deem uma olhada nos meus arquivos de conf, para ver se ta tudo ok. > antes >>>>>> de >>>>>>> eu gerar o ./build >>>>>>> >>>>>>> lembrando que meus Thinclients são exatamente esses modelos aqui: >>>>>>> http://www.connec.com.br/site/p01b1.asp >>>>>>> >>>>>>> somente boot PXE e quero carregalos no ts do 2008 r2 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Em 21 de fevereiro de 2011 14:25, Myke Lima <cm...@gm...> >>>>>> escreveu: >>>>>>> >>>>>>>> Qual diretório fica melhor para extrair o pacote >>>>>>>> Thinstation-2.2.2f.tar.bz2? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Em 21 de fevereiro de 2011 10:31, Myke Lima <cm...@gm...> >>>>>> escreveu: >>>>>>>> >>>>>>>> ok, pode deixar, qnd terminar te aviso >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Em 21 de fevereiro de 2011 10:32, Daian Conrad <da...@op... >>>>>>> escreveu: >>>>>>>>> >>>>>>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>>>>>> Hash: SHA1 >>>>>>>>>> >>>>>>>>>> Te aconselharia o Debian, mas o Ububtu é derivado , então jah > serve, >>>>>>>>>> instala o mais básico que puder, depois precisa instalar mais > alguns >>>>>>>>>> pacotes, tftpd, dhcp3-server e o restante que for preciso vemos >>>>>> durante >>>>>>>>>> o processo. >>>>>>>>>> >>>>>>>>>> depois disso vamos seguir os passos do outro email que passei ok >>>>>>>>>> >>>>>>>>>> []s >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Em 21-02-2011 10:17, Myke Lima escreveu: >>>>>>>>>>> Não tem problema, se você me ajudar faço em linux... vou fazer o >>>>>>>>>> seguinte >>>>>>>>>>> vou formatar novamente a maquina aqui e começar do zero, qual > melhor >>>>>>>>>>> distribuição pra instalar, estou instalando o Ubuntu 10.04 pode > ser >>>>>> ela >>>>>>>>>>> mesma? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Em 21 de fevereiro de 2011 10:17, Daian Conrad < > da...@op... >>>>>>>>>>> escreveu: >>>>>>>>>>> >>>>>>>>>>> Bom, com windows(urrgggg), sei que tem gente que faz, eu >>>>>> infelizmente >>>>>>>>>> só >>>>>>>>>>> posso lhe ajudar se tiver isso em um server linux :). >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Mas acredito que seja parecido(o serviço), o servidor dhcp deve > ter >>>>>> as >>>>>>>>>>> intruções para TFTP(File Transfer) e/ou apontar para um server que >>>>>>>>>> tenha >>>>>>>>>>> esse serviço, no caso do dhcp ser no windows, não tenho > conecimento >>>>>>>>>>> sobre as instruções do PXE, mas acredito que deva ter tambem. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> []s >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Em 21-02-2011 09:58, Myke Lima escreveu: >>>>>>>>>>>>>> eu parei nessa parte aqui >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp >>>>>> que >>>>>>>>>> voce >>>>>>>>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >>>>>> parâmetros >>>>>>>>>> para >>>>>>>>>>>>>> o PXE. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> tenho um servidor DHCP windows que poderia ser usado, mas e > esse >>>>>>>>>> tftp que >>>>>>>>>>> eu >>>>>>>>>>>>>> não sei... pode ser windows tb ou linux >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad < >>>>>> da...@op... >>>>>>>>>>>>>> escreveu: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Bom dia Myke, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Em que parte voce esta tendo problemas , os clientes iniciam ?? >>>>>>>>>> aparece >>>>>>>>>>>>>> algum erro ??? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Não tenho nenhum passo a passo, mas acho que no site tem > algumas >>>>>>>>>>>>>> documentações. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Mass, segue uma rápida descrição do processo . . . >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> * - Ter um linux instalado em uma maquina (que vai servir de >>>>>> server) >>>>>>>>>>>>>> >>>>>>>>>>>>>> * - Baixar o source do thinstation em >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>> > http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download >>>>>>>>>>>>>> >>>>>>>>>>>>>> * - Configurar as opções no arquivo build.conf e > thinstation.conf >>>>>>>>>>>>>> >>>>>>>>>>>>>> ___ Isso pode ser bem complexo dependendo da solução que queira >>>>>>>>>>>>>> disponibilizar para os clientes, porem, existem diversos > exemplos >>>>>> de >>>>>>>>>>>>>> configuração no proprio arquivo. >>>>>>>>>>>>>> >>>>>>>>>>>>>> BUILD.CONF - este arquivo contem as configurações de kernel e >>>>>>>>>> sistema >>>>>>>>>>>>>> operacional que sera disponibilizado para os usuários. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> THINSTATION.CONF - este arquivo, contem informações e >>>>>> configurações >>>>>>>>>>>>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: >>>>>>>>>> rdesktop, >>>>>>>>>>>>>> Xnext, ssh, telnet e afins) >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp >>>>>> que >>>>>>>>>> voce >>>>>>>>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >>>>>> parâmetros >>>>>>>>>> para >>>>>>>>>>>>>> o PXE. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Depois disso, as estações jah estarão habilitadas a iniciar na >>>>>> rede, >>>>>>>>>>>>>> lembrando que ajustes podem ser necessários para ambientes mais >>>>>>>>>>>>>> complexos, no seu caso, para iniciar somente o rdesktop, em >>>>>> teoria é >>>>>>>>>>>>>> tranquilo. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Qualquer coisa posta os erros aqui na lista, e não desiste não, >>>>>>>>>>>>>> lembre-se . . . >>>>>>>>>>>>>> >>>>>>>>>>>>>> o caminho e cheio de pedras, e se voce não tirá-las da sua >>>>>> frente, >>>>>>>>>>>>>> sempre terá o dedão machucado ;-) . >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> []s >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Em 21-02-2011 08:07, Myke Lima escreveu: >>>>>>>>>>>>>>>>> bom dia pessoal, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra >>>>>> alguem >>>>>>>>>> me >>>>>>>>>>> ajudar >>>>>>>>>>>>>> ou >>>>>>>>>>>>>>>>> fazer um passo-a-passo pra eu conseguir colocar os > thinclients >>>>>>>>>> aqui >>>>>>>>>>> pra >>>>>>>>>>>>>> dar >>>>>>>>>>>>>>>>> boot via PXE e conectar no ts 2008 r2. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> desde já agradeço. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>> > ------------------------------------------------------------------------------ >>>>>>>>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) > Parallel >>>>>>>>>> Studio >>>>>>>>>>> XE: >>>>>>>>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>>>>>>>> Find and fix more than 250 security defects in the > development >>>>>>>>>> cycle. >>>>>>>>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>>>>>> performance. >>>>>>>>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>>>> >>>>>>>>>> > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>> - >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>> > ------------------------------------------------------------------------------ >>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >>>>>> Studio >>>>>>>>>> XE: >>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>> Find and fix more than 250 security defects in the development >>>>>> cycle. >>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>> performance. >>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>> Thi...@li... >>>>>>>>>>> > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>> - >>>>>>>>>> >>>>>>>>>> >>>>>> > ------------------------------------------------------------------------------ >>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel > Studio >>>>>> XE: >>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>> Find and fix more than 250 security defects in the development > cycle. >>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>> performance. >>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>> _______________________________________________ >>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>> Thi...@li... >>>>>>>>>> > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> - -- >>>>>>>>>> ======================= >>>>>>>>>> *** Daian Conrad >>>>>>>>>> >>>>>>>>>> Linux user: #248912 >>>>>>>>>> PGP/GPG: 0x7E25E948 >>>>>>>>>> >>>>>>>>>> ** OpenS Team (DaCoD) >>>>>>>>>> E-mail: da...@op... >>>>>>>>>> Fone: +55 48 3954-8000 >>>>>>>>>> >>>>>>>>>> >> >> - ------------------------------------------------------------------------------ Index, Search & Analyze Logs and other IT data in Real-Time with Splunk Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. Free Software Download: http://p.sf.net/sfu/splunk-dev2dev _______________________________________________ Thinstation-portuguese mailing list Thi...@li... https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNZAebAAoJEKPh7Uh+JelIsZMH+wZK8D7rmONjqPBadl9VmH4Q 4V4NNyyuKr1NmfgvtfacrcKHR4Qyq4urFevofBmQsYOvCct0/tQmJPyLg7PQONMt GPb9UfcQW2iBKSeSUdb4Xv4yZggmJUv1i2sIUH5J//dT4ruBaPkjyTO/lE+zqGW9 6F3kf5s4QAW5tBxvt984uPVWk5OhFGZbonB0OxMbXI7VR/bBhVRYXXyAwACz8k+u gb19Vck3zone6wLlYZo/pgjp4bfwRaIUTQT+uR+JovA2vHw4o8K49UbC2E4kx92V 9sJ8JDEPwl3uDfEqJoTz3y8VBqYSopYdII/Q1JxyvvMTYjNOYqR6tVINx8K2Q+4= =nosC -----END PGP SIGNATURE----- |
From: Diego L. <die...@gm...> - 2011-02-22 19:36:15
Attachments:
Diego Fernando Luisi.vcf
|
Instala o Webmin Apt-get webmin intall http://www.vivaolinux.com.br/dica/Instalando-o-Webmin-no-Debian-Etch-atraves -do-aptget Ai dentro do webmin, voce configura o dhcpd Ele instala e configura quase tudo pra vc, Qualquer duvida posta ai, que agente tenta te ajudar. -----Mensagem original----- De: Daian Conrad [mailto:da...@op...] Enviada em: terça-feira, 22 de fevereiro de 2011 16:00 Cc: thi...@li... Assunto: Re: [Thinstation-portuguese] Thinclient boot PXE Ts 2008 R2 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 o Erro é bem claro, voce deve possuir no server dhcp , pelo menos um range com o mesmo ip do server ou da placa em questão, se for adicionar mais redes, ou voce adiciona um ip virtual a placa "eth0", ou adiciona mais um segmento de rede conectado a outra placa. Um exemplo de configuração simples segue abaixo com os dados que voce tem ai . . . #### INICIO allow booting; allow bootp; default-lease-time 2160000; max-lease-time 21600000; authoritative; subnet 10.10.1.0.0 netmask 255.255.255.0 { range 10.10.1.100 10.10..1.120; option routers 10.10.1.1 ; option domain-name-servers 10.10.1.252, 10.10.1.254; option domain-name "nome-da-rede"; next-server 10.10.1.9; option root-path "/tftpboot"; filename "boot-images/pxe/pxelinux.0"; if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; } } ##### FIM []s Em 22-02-2011 14:21, Myke Lima escreveu: > o log esta ai abaixo, bem eu nao tinha colocado a eth0 na > /etc/default/dhcp3-server > > e outra esse servidor tem o ip 10.10.1.9 pois 10.10.1.x eh a rede dos meus > servidores > > mas servira ip's 10.1.1.x que e a rede dos desktops > > > Feb 22 13:14:37 SRVDHCP dhcpd: Wrote 0 leases to leases file. > Feb 22 13:14:37 SRVDHCP dhcpd: > Feb 22 13:14:37 SRVDHCP dhcpd: No subnet declaration for eth0 (10.10.1.9). > Feb 22 13:14:37 SRVDHCP dhcpd: ** Ignoring requests on eth0. If this is not > what > Feb 22 13:14:37 SRVDHCP dhcpd: you want, please write a subnet > declaration > Feb 22 13:14:37 SRVDHCP dhcpd: in your dhcpd.conf file for the network > segment > Feb 22 13:14:37 SRVDHCP dhcpd: to which interface eth0 is attached. ** > Feb 22 13:14:37 SRVDHCP dhcpd: > Feb 22 13:14:37 SRVDHCP dhcpd: > Feb 22 13:14:37 SRVDHCP dhcpd: Not configured to listen on any interfaces! > > 2011/2/22 Daian Conrad <da...@op...> > > Parece estar ok, adicionou a interface em /etc/default/dhcp3-server ? > > > qual o log que aparece no syslog/daemon.log ? > > > a placa de rede esta na mesma rede ? > > []s > > > > Em 22-02-2011 08:55, Myke Lima escreveu: >>>> Instalei o DHCP3 mas não inicializa da erro meu arquivo dhcpd.conf ficou >>>> assim >>>> >>>> >>>> esse é o caminho em que se encontra o arquivo /etc/dhcp3/dhcpd.conf >>>> >>>> >>>> # >>>> # Sample configuration file for ISC dhcpd for Debian >>>> # >>>> # Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as >>>> # configuration file instead of this file. >>>> # >>>> # $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $ >>>> # >>>> >>>> # The ddns-updates-style parameter controls whether or not the server > will >>>> # attempt to do a DNS update when a lease is confirmed. We default to the >>>> # behavior of the version 2 packages ('none', since DHCP v2 didn't >>>> # have support for DDNS.) >>>> >>>> ddns-update-style none; >>>> default-lease-time 21600; >>>> max-lease-time 43200; >>>> autoritative; >>>> >>>> subnet 10.1.1.0 netmask 255.255.255.0 { >>>> range 10.1.1.10 10.1.1.14; >>>> option routers 10.1.1.1; >>>> option domain-name-servers 10.10.1.252, 10.10.1.254; >>>> option broadcast-address 10.1.1.255; >>>> } >>>> >>>> # If this DHCP server is the official DHCP server for the local >>>> # network, the authoritative directive should be uncommented. >>>> #authoritative; >>>> >>>> # Use this to send dhcp log messages to a different log file (you also >>>> # have to hack syslog.conf to complete the redirection). >>>> ##log-facility local7; >>>> >>>> # No service will be given on this subnet, but declaring it helps the >>>> # DHCP server to understand the network topology. >>>> >>>> #subnet 10.152.187.0 netmask 255.255.255.0 { >>>> #} >>>> >>>> # This is a very basic subnet declaration. >>>> >>>> #subnet 10.254.239.0 netmask 255.255.255.224 { >>>> # range 10.254.239.10 10.254.239.20; >>>> # option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; >>>> #} >>>> >>>> # This declaration allows BOOTP clients to get dynamic addresses, >>>> # which we don't really recommend. >>>> >>>> #subnet 10.254.239.32 netmask 255.255.255.224 { >>>> # range dynamic-bootp 10.254.239.40 10.254.239.60; >>>> # option broadcast-address 10.254.239.31; >>>> # option routers rtr-239-32-1.example.org; >>>> #} >>>> >>>> # A slightly different configuration for an internal subnet. >>>> #subnet 10.5.5.0 netmask 255.255.255.224 { >>>> # range 10.5.5.26 10.5.5.30; >>>> # option domain-name-servers ns1.internal.example.org; >>>> # option domain-name "internal.example.org"; >>>> # option routers 10.5.5.1; >>>> # option broadcast-address 10.5.5.31; >>>> # default-lease-time 600; >>>> # max-lease-time 7200; >>>> #} >>>> >>>> # Hosts which require special configuration options can be listed in >>>> # host statements. If no address is specified, the address will be >>>> # allocated dynamically (if possible), but the host-specific information >>>> # will still come from the host declaration. >>>> >>>> #host passacaglia { >>>> # hardware ethernet 0:0:c0:5d:bd:95; >>>> # filename "vmunix.passacaglia"; >>>> # server-name "toccata.fugue.com"; >>>> #} >>>> >>>> # Fixed IP addresses can also be specified for hosts. These addresses >>>> # should not also be listed as being available for dynamic assignment. >>>> # Hosts for which fixed IP addresses have been specified can boot using >>>> # BOOTP or DHCP. Hosts for which no fixed address is specified can only >>>> # be booted with DHCP, unless there is an address range on the subnet >>>> # to which a BOOTP client is connected which has the dynamic-bootp flag >>>> # set. >>>> #host fantasia { >>>> # hardware ethernet 08:00:07:26:c0:a5; >>>> # fixed-address fantasia.fugue.com; >>>> #} >>>> >>>> # You can declare a class of clients and then do address allocation >>>> # based on that. The example below shows a case where all clients >>>> # in a certain class get addresses on the 10.17.224/24 subnet, and all >>>> # other clients get addresses on the 10.0.29/24 subnet. >>>> >>>> #class "foo" { >>>> # match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; >>>> #} >>>> >>>> #shared-network 224-29 { >>>> # subnet 10.17.224.0 netmask 255.255.255.0 { >>>> # option routers rtr-224.example.org; >>>> # } >>>> # subnet 10.0.29.0 netmask 255.255.255.0 { >>>> # option routers rtr-29.example.org; >>>> # } >>>> # pool { >>>> # allow members of "foo"; >>>> # range 10.17.224.10 10.17.224.250; >>>> # } >>>> # pool { >>>> # deny members of "foo"; >>>> # range 10.0.29.10 10.0.29.230; >>>> # } >>>> #} >>>> >>>> >>>> o que esta errado???? >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Em 21 de fevereiro de 2011 17:58, Myke Lima <cm...@gm...> > escreveu: >>>> >>>>> Ok, imagem gerada sem problemas, agora falta o dhcp e o tftp >>>>> >>>>> Em 21 de fevereiro de 2011 17:02, Daian Conrad <da...@op... >>>> escreveu: >>>>> >>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>> Hash: SHA1 >>>>>> >>>>>> Os arquivos parecem estar corretos, faltando somente, compilar a > imagem, >>>>>> ver se vai criar certinho e conferir a configuração do serviço tftp e > do >>>>>> dhcp. >>>>>> >>>>>> []s >>>>>> >>>>>> >>>>>> Em 21-02-2011 14:59, Myke Lima escreveu: >>>>>>> Deem uma olhada nos meus arquivos de conf, para ver se ta tudo ok. > antes >>>>>> de >>>>>>> eu gerar o ./build >>>>>>> >>>>>>> lembrando que meus Thinclients são exatamente esses modelos aqui: >>>>>>> http://www.connec.com.br/site/p01b1.asp >>>>>>> >>>>>>> somente boot PXE e quero carregalos no ts do 2008 r2 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Em 21 de fevereiro de 2011 14:25, Myke Lima <cm...@gm...> >>>>>> escreveu: >>>>>>> >>>>>>>> Qual diretório fica melhor para extrair o pacote >>>>>>>> Thinstation-2.2.2f.tar.bz2? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Em 21 de fevereiro de 2011 10:31, Myke Lima <cm...@gm...> >>>>>> escreveu: >>>>>>>> >>>>>>>> ok, pode deixar, qnd terminar te aviso >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Em 21 de fevereiro de 2011 10:32, Daian Conrad <da...@op... >>>>>>> escreveu: >>>>>>>>> >>>>>>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>>>>>> Hash: SHA1 >>>>>>>>>> >>>>>>>>>> Te aconselharia o Debian, mas o Ububtu é derivado , então jah > serve, >>>>>>>>>> instala o mais básico que puder, depois precisa instalar mais > alguns >>>>>>>>>> pacotes, tftpd, dhcp3-server e o restante que for preciso vemos >>>>>> durante >>>>>>>>>> o processo. >>>>>>>>>> >>>>>>>>>> depois disso vamos seguir os passos do outro email que passei ok >>>>>>>>>> >>>>>>>>>> []s >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Em 21-02-2011 10:17, Myke Lima escreveu: >>>>>>>>>>> Não tem problema, se você me ajudar faço em linux... vou fazer o >>>>>>>>>> seguinte >>>>>>>>>>> vou formatar novamente a maquina aqui e começar do zero, qual > melhor >>>>>>>>>>> distribuição pra instalar, estou instalando o Ubuntu 10.04 pode > ser >>>>>> ela >>>>>>>>>>> mesma? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Em 21 de fevereiro de 2011 10:17, Daian Conrad < > da...@op... >>>>>>>>>>> escreveu: >>>>>>>>>>> >>>>>>>>>>> Bom, com windows(urrgggg), sei que tem gente que faz, eu >>>>>> infelizmente >>>>>>>>>> só >>>>>>>>>>> posso lhe ajudar se tiver isso em um server linux :). >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Mas acredito que seja parecido(o serviço), o servidor dhcp deve > ter >>>>>> as >>>>>>>>>>> intruções para TFTP(File Transfer) e/ou apontar para um server que >>>>>>>>>> tenha >>>>>>>>>>> esse serviço, no caso do dhcp ser no windows, não tenho > conecimento >>>>>>>>>>> sobre as instruções do PXE, mas acredito que deva ter tambem. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> []s >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Em 21-02-2011 09:58, Myke Lima escreveu: >>>>>>>>>>>>>> eu parei nessa parte aqui >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp >>>>>> que >>>>>>>>>> voce >>>>>>>>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >>>>>> parâmetros >>>>>>>>>> para >>>>>>>>>>>>>> o PXE. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> tenho um servidor DHCP windows que poderia ser usado, mas e > esse >>>>>>>>>> tftp que >>>>>>>>>>> eu >>>>>>>>>>>>>> não sei... pode ser windows tb ou linux >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad < >>>>>> da...@op... >>>>>>>>>>>>>> escreveu: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Bom dia Myke, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Em que parte voce esta tendo problemas , os clientes iniciam ?? >>>>>>>>>> aparece >>>>>>>>>>>>>> algum erro ??? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Não tenho nenhum passo a passo, mas acho que no site tem > algumas >>>>>>>>>>>>>> documentações. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Mass, segue uma rápida descrição do processo . . . >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> * - Ter um linux instalado em uma maquina (que vai servir de >>>>>> server) >>>>>>>>>>>>>> >>>>>>>>>>>>>> * - Baixar o source do thinstation em >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>> > http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2. 2/Thinstation-2.2.2f.tar.bz2/download >>>>>>>>>>>>>> >>>>>>>>>>>>>> * - Configurar as opções no arquivo build.conf e > thinstation.conf >>>>>>>>>>>>>> >>>>>>>>>>>>>> ___ Isso pode ser bem complexo dependendo da solução que queira >>>>>>>>>>>>>> disponibilizar para os clientes, porem, existem diversos > exemplos >>>>>> de >>>>>>>>>>>>>> configuração no proprio arquivo. >>>>>>>>>>>>>> >>>>>>>>>>>>>> BUILD.CONF - este arquivo contem as configurações de kernel e >>>>>>>>>> sistema >>>>>>>>>>>>>> operacional que sera disponibilizado para os usuários. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> THINSTATION.CONF - este arquivo, contem informações e >>>>>> configurações >>>>>>>>>>>>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: >>>>>>>>>> rdesktop, >>>>>>>>>>>>>> Xnext, ssh, telnet e afins) >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de dhcp >>>>>> que >>>>>>>>>> voce >>>>>>>>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >>>>>> parâmetros >>>>>>>>>> para >>>>>>>>>>>>>> o PXE. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Depois disso, as estações jah estarão habilitadas a iniciar na >>>>>> rede, >>>>>>>>>>>>>> lembrando que ajustes podem ser necessários para ambientes mais >>>>>>>>>>>>>> complexos, no seu caso, para iniciar somente o rdesktop, em >>>>>> teoria é >>>>>>>>>>>>>> tranquilo. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Qualquer coisa posta os erros aqui na lista, e não desiste não, >>>>>>>>>>>>>> lembre-se . . . >>>>>>>>>>>>>> >>>>>>>>>>>>>> o caminho e cheio de pedras, e se voce não tirá-las da sua >>>>>> frente, >>>>>>>>>>>>>> sempre terá o dedão machucado ;-) . >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> []s >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Em 21-02-2011 08:07, Myke Lima escreveu: >>>>>>>>>>>>>>>>> bom dia pessoal, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra >>>>>> alguem >>>>>>>>>> me >>>>>>>>>>> ajudar >>>>>>>>>>>>>> ou >>>>>>>>>>>>>>>>> fazer um passo-a-passo pra eu conseguir colocar os > thinclients >>>>>>>>>> aqui >>>>>>>>>>> pra >>>>>>>>>>>>>> dar >>>>>>>>>>>>>>>>> boot via PXE e conectar no ts 2008 r2. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> desde já agradeço. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>> > ---------------------------------------------------------------------------- -- >>>>>>>>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) > Parallel >>>>>>>>>> Studio >>>>>>>>>>> XE: >>>>>>>>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>>>>>>>> Find and fix more than 250 security defects in the > development >>>>>>>>>> cycle. >>>>>>>>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>>>>>> performance. >>>>>>>>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>>>> >>>>>>>>>> > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>> - >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>> > ---------------------------------------------------------------------------- -- >>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >>>>>> Studio >>>>>>>>>> XE: >>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>> Find and fix more than 250 security defects in the development >>>>>> cycle. >>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>> performance. >>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>> Thi...@li... >>>>>>>>>>> > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>> - >>>>>>>>>> >>>>>>>>>> >>>>>> > ---------------------------------------------------------------------------- -- >>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel > Studio >>>>>> XE: >>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>> Find and fix more than 250 security defects in the development > cycle. >>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>> performance. >>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>> _______________________________________________ >>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>> Thi...@li... >>>>>>>>>> > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> - -- >>>>>>>>>> ======================= >>>>>>>>>> *** Daian Conrad >>>>>>>>>> >>>>>>>>>> Linux user: #248912 >>>>>>>>>> PGP/GPG: 0x7E25E948 >>>>>>>>>> >>>>>>>>>> ** OpenS Team (DaCoD) >>>>>>>>>> E-mail: da...@op... >>>>>>>>>> Fone: +55 48 3954-8000 >>>>>>>>>> >>>>>>>>>> >> >> - ---------------------------------------------------------------------------- -- Index, Search & Analyze Logs and other IT data in Real-Time with Splunk Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. Free Software Download: http://p.sf.net/sfu/splunk-dev2dev _______________________________________________ Thinstation-portuguese mailing list Thi...@li... https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNZAebAAoJEKPh7Uh+JelIsZMH+wZK8D7rmONjqPBadl9VmH4Q 4V4NNyyuKr1NmfgvtfacrcKHR4Qyq4urFevofBmQsYOvCct0/tQmJPyLg7PQONMt GPb9UfcQW2iBKSeSUdb4Xv4yZggmJUv1i2sIUH5J//dT4ruBaPkjyTO/lE+zqGW9 6F3kf5s4QAW5tBxvt984uPVWk5OhFGZbonB0OxMbXI7VR/bBhVRYXXyAwACz8k+u gb19Vck3zone6wLlYZo/pgjp4bfwRaIUTQT+uR+JovA2vHw4o8K49UbC2E4kx92V 9sJ8JDEPwl3uDfEqJoTz3y8VBqYSopYdII/Q1JxyvvMTYjNOYqR6tVINx8K2Q+4= =nosC -----END PGP SIGNATURE----- ---------------------------------------------------------------------------- -- Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev _______________________________________________ Thinstation-portuguese mailing list Thi...@li... https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese |
From: Daian C. <da...@op...> - 2011-02-22 19:45:00
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 isso, vai funcionar []s Em 22-02-2011 16:03, Myke Lima escreveu: > eu posso fazer o seguinte colocar esse server DHCP na rede 10.1.1.x ai vai > rola tudo certo e posso utilizar a config do dhcp que vc mandou > > certo? > > > > 2011/2/22 Daian Conrad <da...@op...> > > o Erro é bem claro, voce deve possuir no server dhcp , pelo menos um > range com o mesmo ip do server ou da placa em questão, se for adicionar > mais redes, ou voce adiciona um ip virtual a placa "eth0", ou adiciona > mais um segmento de rede conectado a outra placa. > > > Um exemplo de configuração simples segue abaixo com os dados que voce > tem ai . . . > > #### INICIO > allow booting; > allow bootp; > default-lease-time 2160000; > max-lease-time 21600000; > authoritative; > > subnet 10.10.1.0.0 netmask 255.255.255.0 { > range 10.10.1.100 10.10..1.120; > option routers 10.10.1.1 ; > option domain-name-servers 10.10.1.252, 10.10.1.254; > option domain-name "nome-da-rede"; > next-server 10.10.1.9; > option root-path "/tftpboot"; > filename "boot-images/pxe/pxelinux.0"; > > if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { > filename "pxelinux.0"; > } > } > > ##### FIM > > []s > > > Em 22-02-2011 14:21, Myke Lima escreveu: >>>> o log esta ai abaixo, bem eu nao tinha colocado a eth0 na >>>> /etc/default/dhcp3-server >>>> >>>> e outra esse servidor tem o ip 10.10.1.9 pois 10.10.1.x eh a rede dos > meus >>>> servidores >>>> >>>> mas servira ip's 10.1.1.x que e a rede dos desktops >>>> >>>> >>>> Feb 22 13:14:37 SRVDHCP dhcpd: Wrote 0 leases to leases file. >>>> Feb 22 13:14:37 SRVDHCP dhcpd: >>>> Feb 22 13:14:37 SRVDHCP dhcpd: No subnet declaration for eth0 > (10.10.1.9). >>>> Feb 22 13:14:37 SRVDHCP dhcpd: ** Ignoring requests on eth0. If this is > not >>>> what >>>> Feb 22 13:14:37 SRVDHCP dhcpd: you want, please write a subnet >>>> declaration >>>> Feb 22 13:14:37 SRVDHCP dhcpd: in your dhcpd.conf file for the network >>>> segment >>>> Feb 22 13:14:37 SRVDHCP dhcpd: to which interface eth0 is attached. ** >>>> Feb 22 13:14:37 SRVDHCP dhcpd: >>>> Feb 22 13:14:37 SRVDHCP dhcpd: >>>> Feb 22 13:14:37 SRVDHCP dhcpd: Not configured to listen on any > interfaces! >>>> >>>> 2011/2/22 Daian Conrad <da...@op...> >>>> >>>> Parece estar ok, adicionou a interface em /etc/default/dhcp3-server ? >>>> >>>> >>>> qual o log que aparece no syslog/daemon.log ? >>>> >>>> >>>> a placa de rede esta na mesma rede ? >>>> >>>> []s >>>> >>>> >>>> >>>> Em 22-02-2011 08:55, Myke Lima escreveu: >>>>>>> Instalei o DHCP3 mas não inicializa da erro meu arquivo dhcpd.conf > ficou >>>>>>> assim >>>>>>> >>>>>>> >>>>>>> esse é o caminho em que se encontra o arquivo > /etc/dhcp3/dhcpd.conf >>>>>>> >>>>>>> >>>>>>> # >>>>>>> # Sample configuration file for ISC dhcpd for Debian >>>>>>> # >>>>>>> # Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as >>>>>>> # configuration file instead of this file. >>>>>>> # >>>>>>> # $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $ >>>>>>> # >>>>>>> >>>>>>> # The ddns-updates-style parameter controls whether or not the server >>>> will >>>>>>> # attempt to do a DNS update when a lease is confirmed. We default to > the >>>>>>> # behavior of the version 2 packages ('none', since DHCP v2 didn't >>>>>>> # have support for DDNS.) >>>>>>> >>>>>>> ddns-update-style none; >>>>>>> default-lease-time 21600; >>>>>>> max-lease-time 43200; >>>>>>> autoritative; >>>>>>> >>>>>>> subnet 10.1.1.0 netmask 255.255.255.0 { >>>>>>> range 10.1.1.10 10.1.1.14; >>>>>>> option routers 10.1.1.1; >>>>>>> option domain-name-servers 10.10.1.252, 10.10.1.254; >>>>>>> option broadcast-address 10.1.1.255; >>>>>>> } >>>>>>> >>>>>>> # If this DHCP server is the official DHCP server for the local >>>>>>> # network, the authoritative directive should be uncommented. >>>>>>> #authoritative; >>>>>>> >>>>>>> # Use this to send dhcp log messages to a different log file (you also >>>>>>> # have to hack syslog.conf to complete the redirection). >>>>>>> ##log-facility local7; >>>>>>> >>>>>>> # No service will be given on this subnet, but declaring it helps the >>>>>>> # DHCP server to understand the network topology. >>>>>>> >>>>>>> #subnet 10.152.187.0 netmask 255.255.255.0 { >>>>>>> #} >>>>>>> >>>>>>> # This is a very basic subnet declaration. >>>>>>> >>>>>>> #subnet 10.254.239.0 netmask 255.255.255.224 { >>>>>>> # range 10.254.239.10 10.254.239.20; >>>>>>> # option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; >>>>>>> #} >>>>>>> >>>>>>> # This declaration allows BOOTP clients to get dynamic addresses, >>>>>>> # which we don't really recommend. >>>>>>> >>>>>>> #subnet 10.254.239.32 netmask 255.255.255.224 { >>>>>>> # range dynamic-bootp 10.254.239.40 10.254.239.60; >>>>>>> # option broadcast-address 10.254.239.31; >>>>>>> # option routers rtr-239-32-1.example.org; >>>>>>> #} >>>>>>> >>>>>>> # A slightly different configuration for an internal subnet. >>>>>>> #subnet 10.5.5.0 netmask 255.255.255.224 { >>>>>>> # range 10.5.5.26 10.5.5.30; >>>>>>> # option domain-name-servers ns1.internal.example.org; >>>>>>> # option domain-name "internal.example.org"; >>>>>>> # option routers 10.5.5.1; >>>>>>> # option broadcast-address 10.5.5.31; >>>>>>> # default-lease-time 600; >>>>>>> # max-lease-time 7200; >>>>>>> #} >>>>>>> >>>>>>> # Hosts which require special configuration options can be listed in >>>>>>> # host statements. If no address is specified, the address will be >>>>>>> # allocated dynamically (if possible), but the host-specific > information >>>>>>> # will still come from the host declaration. >>>>>>> >>>>>>> #host passacaglia { >>>>>>> # hardware ethernet 0:0:c0:5d:bd:95; >>>>>>> # filename "vmunix.passacaglia"; >>>>>>> # server-name "toccata.fugue.com"; >>>>>>> #} >>>>>>> >>>>>>> # Fixed IP addresses can also be specified for hosts. These > addresses >>>>>>> # should not also be listed as being available for dynamic assignment. >>>>>>> # Hosts for which fixed IP addresses have been specified can boot > using >>>>>>> # BOOTP or DHCP. Hosts for which no fixed address is specified can > only >>>>>>> # be booted with DHCP, unless there is an address range on the subnet >>>>>>> # to which a BOOTP client is connected which has the dynamic-bootp > flag >>>>>>> # set. >>>>>>> #host fantasia { >>>>>>> # hardware ethernet 08:00:07:26:c0:a5; >>>>>>> # fixed-address fantasia.fugue.com; >>>>>>> #} >>>>>>> >>>>>>> # You can declare a class of clients and then do address allocation >>>>>>> # based on that. The example below shows a case where all clients >>>>>>> # in a certain class get addresses on the 10.17.224/24 subnet, and all >>>>>>> # other clients get addresses on the 10.0.29/24 subnet. >>>>>>> >>>>>>> #class "foo" { >>>>>>> # match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; >>>>>>> #} >>>>>>> >>>>>>> #shared-network 224-29 { >>>>>>> # subnet 10.17.224.0 netmask 255.255.255.0 { >>>>>>> # option routers rtr-224.example.org; >>>>>>> # } >>>>>>> # subnet 10.0.29.0 netmask 255.255.255.0 { >>>>>>> # option routers rtr-29.example.org; >>>>>>> # } >>>>>>> # pool { >>>>>>> # allow members of "foo"; >>>>>>> # range 10.17.224.10 10.17.224.250; >>>>>>> # } >>>>>>> # pool { >>>>>>> # deny members of "foo"; >>>>>>> # range 10.0.29.10 10.0.29.230; >>>>>>> # } >>>>>>> #} >>>>>>> >>>>>>> >>>>>>> o que esta errado???? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Em 21 de fevereiro de 2011 17:58, Myke Lima <cm...@gm...> >>>> escreveu: >>>>>>> >>>>>>>> Ok, imagem gerada sem problemas, agora falta o dhcp e o tftp >>>>>>>> >>>>>>>> Em 21 de fevereiro de 2011 17:02, Daian Conrad <da...@op... >>>>>>> escreveu: >>>>>>>> >>>>>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>>>>> Hash: SHA1 >>>>>>>>> >>>>>>>>> Os arquivos parecem estar corretos, faltando somente, compilar a >>>> imagem, >>>>>>>>> ver se vai criar certinho e conferir a configuração do serviço tftp > e >>>> do >>>>>>>>> dhcp. >>>>>>>>> >>>>>>>>> []s >>>>>>>>> >>>>>>>>> >>>>>>>>> Em 21-02-2011 14:59, Myke Lima escreveu: >>>>>>>>>> Deem uma olhada nos meus arquivos de conf, para ver se ta tudo ok. >>>> antes >>>>>>>>> de >>>>>>>>>> eu gerar o ./build >>>>>>>>>> >>>>>>>>>> lembrando que meus Thinclients são exatamente esses modelos aqui: >>>>>>>>>> http://www.connec.com.br/site/p01b1.asp >>>>>>>>>> >>>>>>>>>> somente boot PXE e quero carregalos no ts do 2008 r2 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Em 21 de fevereiro de 2011 14:25, Myke Lima <cm...@gm...> >>>>>>>>> escreveu: >>>>>>>>>> >>>>>>>>>>> Qual diretório fica melhor para extrair o pacote >>>>>>>>>>> Thinstation-2.2.2f.tar.bz2? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Em 21 de fevereiro de 2011 10:31, Myke Lima <cm...@gm...> >>>>>>>>> escreveu: >>>>>>>>>>> >>>>>>>>>>> ok, pode deixar, qnd terminar te aviso >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Em 21 de fevereiro de 2011 10:32, Daian Conrad < > da...@op... >>>>>>>>>> escreveu: >>>>>>>>>>>> >>>>>>>>>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>>>>>>>>> Hash: SHA1 >>>>>>>>>>>>> >>>>>>>>>>>>> Te aconselharia o Debian, mas o Ububtu é derivado , então jah >>>> serve, >>>>>>>>>>>>> instala o mais básico que puder, depois precisa instalar mais >>>> alguns >>>>>>>>>>>>> pacotes, tftpd, dhcp3-server e o restante que for preciso vemos >>>>>>>>> durante >>>>>>>>>>>>> o processo. >>>>>>>>>>>>> >>>>>>>>>>>>> depois disso vamos seguir os passos do outro email que passei ok >>>>>>>>>>>>> >>>>>>>>>>>>> []s >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Em 21-02-2011 10:17, Myke Lima escreveu: >>>>>>>>>>>>>> Não tem problema, se você me ajudar faço em linux... vou fazer > o >>>>>>>>>>>>> seguinte >>>>>>>>>>>>>> vou formatar novamente a maquina aqui e começar do zero, qual >>>> melhor >>>>>>>>>>>>>> distribuição pra instalar, estou instalando o Ubuntu 10.04 pode >>>> ser >>>>>>>>> ela >>>>>>>>>>>>>> mesma? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Em 21 de fevereiro de 2011 10:17, Daian Conrad < >>>> da...@op... >>>>>>>>>>>>>> escreveu: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Bom, com windows(urrgggg), sei que tem gente que faz, eu >>>>>>>>> infelizmente >>>>>>>>>>>>> só >>>>>>>>>>>>>> posso lhe ajudar se tiver isso em um server linux :). >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Mas acredito que seja parecido(o serviço), o servidor dhcp deve >>>> ter >>>>>>>>> as >>>>>>>>>>>>>> intruções para TFTP(File Transfer) e/ou apontar para um server > que >>>>>>>>>>>>> tenha >>>>>>>>>>>>>> esse serviço, no caso do dhcp ser no windows, não tenho >>>> conecimento >>>>>>>>>>>>>> sobre as instruções do PXE, mas acredito que deva ter tambem. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> []s >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Em 21-02-2011 09:58, Myke Lima escreveu: >>>>>>>>>>>>>>>>> eu parei nessa parte aqui >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de > dhcp >>>>>>>>> que >>>>>>>>>>>>> voce >>>>>>>>>>>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >>>>>>>>> parâmetros >>>>>>>>>>>>> para >>>>>>>>>>>>>>>>> o PXE. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> tenho um servidor DHCP windows que poderia ser usado, mas e >>>> esse >>>>>>>>>>>>> tftp que >>>>>>>>>>>>>> eu >>>>>>>>>>>>>>>>> não sei... pode ser windows tb ou linux >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad < >>>>>>>>> da...@op... >>>>>>>>>>>>>>>>> escreveu: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Bom dia Myke, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Em que parte voce esta tendo problemas , os clientes iniciam > ?? >>>>>>>>>>>>> aparece >>>>>>>>>>>>>>>>> algum erro ??? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Não tenho nenhum passo a passo, mas acho que no site tem >>>> algumas >>>>>>>>>>>>>>>>> documentações. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Mass, segue uma rápida descrição do processo . . . >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> * - Ter um linux instalado em uma maquina (que vai servir de >>>>>>>>> server) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> * - Baixar o source do thinstation em >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>> >>>> > http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> * - Configurar as opções no arquivo build.conf e >>>> thinstation.conf >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ___ Isso pode ser bem complexo dependendo da solução que > queira >>>>>>>>>>>>>>>>> disponibilizar para os clientes, porem, existem diversos >>>> exemplos >>>>>>>>> de >>>>>>>>>>>>>>>>> configuração no proprio arquivo. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> BUILD.CONF - este arquivo contem as configurações de kernel > e >>>>>>>>>>>>> sistema >>>>>>>>>>>>>>>>> operacional que sera disponibilizado para os usuários. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> THINSTATION.CONF - este arquivo, contem informações e >>>>>>>>> configurações >>>>>>>>>>>>>>>>> sobre a(s) sessão(ões) que sera iniciado para o usuario(Ex.: >>>>>>>>>>>>> rdesktop, >>>>>>>>>>>>>>>>> Xnext, ssh, telnet e afins) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de > dhcp >>>>>>>>> que >>>>>>>>>>>>> voce >>>>>>>>>>>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >>>>>>>>> parâmetros >>>>>>>>>>>>> para >>>>>>>>>>>>>>>>> o PXE. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Depois disso, as estações jah estarão habilitadas a iniciar > na >>>>>>>>> rede, >>>>>>>>>>>>>>>>> lembrando que ajustes podem ser necessários para ambientes > mais >>>>>>>>>>>>>>>>> complexos, no seu caso, para iniciar somente o rdesktop, em >>>>>>>>> teoria é >>>>>>>>>>>>>>>>> tranquilo. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Qualquer coisa posta os erros aqui na lista, e não desiste > não, >>>>>>>>>>>>>>>>> lembre-se . . . >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> o caminho e cheio de pedras, e se voce não tirá-las da sua >>>>>>>>> frente, >>>>>>>>>>>>>>>>> sempre terá o dedão machucado ;-) . >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> []s >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Em 21-02-2011 08:07, Myke Lima escreveu: >>>>>>>>>>>>>>>>>>>> bom dia pessoal, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> eu já desisti, não dou conta, estou disposto a pagar pra >>>>>>>>> alguem >>>>>>>>>>>>> me >>>>>>>>>>>>>> ajudar >>>>>>>>>>>>>>>>> ou >>>>>>>>>>>>>>>>>>>> fazer um passo-a-passo pra eu conseguir colocar os >>>> thinclients >>>>>>>>>>>>> aqui >>>>>>>>>>>>>> pra >>>>>>>>>>>>>>>>> dar >>>>>>>>>>>>>>>>>>>> boot via PXE e conectar no ts 2008 r2. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> desde já agradeço. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>> >>>> > ------------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) >>>> Parallel >>>>>>>>>>>>> Studio >>>>>>>>>>>>>> XE: >>>>>>>>>>>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>>>>>>>>>>> Find and fix more than 250 security defects in the >>>> development >>>>>>>>>>>>> cycle. >>>>>>>>>>>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>>>>>>>>> performance. >>>>>>>>>>>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> - >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>> >>>> > ------------------------------------------------------------------------------ >>>>>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >>>>>>>>> Studio >>>>>>>>>>>>> XE: >>>>>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>>>>> Find and fix more than 250 security defects in the development >>>>>>>>> cycle. >>>>>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>>>>> performance. >>>>>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>> >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>> - >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>> >>>> > ------------------------------------------------------------------------------ >>>>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) Parallel >>>> Studio >>>>>>>>> XE: >>>>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>>>> Find and fix more than 250 security defects in the development >>>> cycle. >>>>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>>>>> performance. >>>>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>> >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> - -- >>>>>>>>>>>>> ======================= >>>>>>>>>>>>> *** Daian Conrad >>>>>>>>>>>>> >>>>>>>>>>>>> Linux user: #248912 >>>>>>>>>>>>> PGP/GPG: 0x7E25E948 >>>>>>>>>>>>> >>>>>>>>>>>>> ** OpenS Team (DaCoD) >>>>>>>>>>>>> E-mail: da...@op... >>>>>>>>>>>>> Fone: +55 48 3954-8000 >>>>>>>>>>>>> >>>>>>>>>>>>> > >>>>> >>>>> > - > > ------------------------------------------------------------------------------ > Index, Search & Analyze Logs and other IT data in Real-Time with Splunk > Collect, index and harness all the fast moving IT data generated by your > applications, servers and devices whether physical, virtual or in the > cloud. > Deliver compliance at lower cost and gain new business insights. > Free Software Download: http://p.sf.net/sfu/splunk-dev2dev > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>> > >> >> - ------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev _______________________________________________ Thinstation-portuguese mailing list Thi...@li... https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNZBLzAAoJEKPh7Uh+JelIJVsH/R9BVpyi2P5pKjVeh+c9+rMz BvuJjWSVkaZi9+qX2B8SsggB8h0ef0ejYQwHaWtz9hyJzi5veRjj5W/fRhtEvBcd KBaTNdbcxnB7H40HAawaTd5CqxjywUzTd56l4NR7/ioUXalo65Zvq/dSsoFX4fJY 3PvoaCZVV0oLcQNKwHnfQRf/lkFZeTWNUL0QqXuK7bz+INEBXEHPH7Zu2pZi7CTM zSnMvkKvVIqRZRbVq4640YveuN+CXCG4/U+NI0nyhs6M+6ZED8ksxrD2++V4799b ENA4Tux6UuykdMhmsp22yg65Kq4bcrBlf13fAbvzWQg6U2Rkc6t65FtVP+PFfxk= =jPSa -----END PGP SIGNATURE----- |
From: Daian C. <da...@op...> - 2011-02-23 17:51:34
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 use o wget wget -c http://ufpr.dl.sourceforge.net/project/thinstation/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2 []s Em 23-02-2011 14:31, Myke Lima escreveu: > estou começando do zero novamente até agora ta tudo ok, servidor > configurado, instalado, dhcp ok > > instalei e configurei a versao 10.04 server, como faço para baixar o > thinstation via linha de comando??? > > > > > Em 22 de fevereiro de 2011 16:48, Daian Conrad <da...@op...>escreveu: > > isso, vai funcionar > > []s > > Em 22-02-2011 16:03, Myke Lima escreveu: >>>> eu posso fazer o seguinte colocar esse server DHCP na rede 10.1.1.x ai > vai >>>> rola tudo certo e posso utilizar a config do dhcp que vc mandou >>>> >>>> certo? >>>> >>>> >>>> >>>> 2011/2/22 Daian Conrad <da...@op...> >>>> >>>> o Erro é bem claro, voce deve possuir no server dhcp , pelo menos um >>>> range com o mesmo ip do server ou da placa em questão, se for adicionar >>>> mais redes, ou voce adiciona um ip virtual a placa "eth0", ou adiciona >>>> mais um segmento de rede conectado a outra placa. >>>> >>>> >>>> Um exemplo de configuração simples segue abaixo com os dados que voce >>>> tem ai . . . >>>> >>>> #### INICIO >>>> allow booting; >>>> allow bootp; >>>> default-lease-time 2160000; >>>> max-lease-time 21600000; >>>> authoritative; >>>> >>>> subnet 10.10.1.0.0 netmask 255.255.255.0 { >>>> range 10.10.1.100 10.10..1.120; >>>> option routers 10.10.1.1 ; >>>> option domain-name-servers 10.10.1.252, 10.10.1.254; >>>> option domain-name "nome-da-rede"; >>>> next-server 10.10.1.9; >>>> option root-path "/tftpboot"; >>>> filename "boot-images/pxe/pxelinux.0"; >>>> >>>> if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { >>>> filename "pxelinux.0"; >>>> } >>>> } >>>> >>>> ##### FIM >>>> >>>> []s >>>> >>>> >>>> Em 22-02-2011 14:21, Myke Lima escreveu: >>>>>>> o log esta ai abaixo, bem eu nao tinha colocado a eth0 na >>>>>>> /etc/default/dhcp3-server >>>>>>> >>>>>>> e outra esse servidor tem o ip 10.10.1.9 pois 10.10.1.x eh a rede dos >>>> meus >>>>>>> servidores >>>>>>> >>>>>>> mas servira ip's 10.1.1.x que e a rede dos desktops >>>>>>> >>>>>>> >>>>>>> Feb 22 13:14:37 SRVDHCP dhcpd: Wrote 0 leases to leases file. >>>>>>> Feb 22 13:14:37 SRVDHCP dhcpd: >>>>>>> Feb 22 13:14:37 SRVDHCP dhcpd: No subnet declaration for eth0 >>>> (10.10.1.9). >>>>>>> Feb 22 13:14:37 SRVDHCP dhcpd: ** Ignoring requests on eth0. If this > is >>>> not >>>>>>> what >>>>>>> Feb 22 13:14:37 SRVDHCP dhcpd: you want, please write a subnet >>>>>>> declaration >>>>>>> Feb 22 13:14:37 SRVDHCP dhcpd: in your dhcpd.conf file for the > network >>>>>>> segment >>>>>>> Feb 22 13:14:37 SRVDHCP dhcpd: to which interface eth0 is attached. > ** >>>>>>> Feb 22 13:14:37 SRVDHCP dhcpd: >>>>>>> Feb 22 13:14:37 SRVDHCP dhcpd: >>>>>>> Feb 22 13:14:37 SRVDHCP dhcpd: Not configured to listen on any >>>> interfaces! >>>>>>> >>>>>>> 2011/2/22 Daian Conrad <da...@op...> >>>>>>> >>>>>>> Parece estar ok, adicionou a interface em /etc/default/dhcp3-server ? >>>>>>> >>>>>>> >>>>>>> qual o log que aparece no syslog/daemon.log ? >>>>>>> >>>>>>> >>>>>>> a placa de rede esta na mesma rede ? >>>>>>> >>>>>>> []s >>>>>>> >>>>>>> >>>>>>> >>>>>>> Em 22-02-2011 08:55, Myke Lima escreveu: >>>>>>>>>> Instalei o DHCP3 mas não inicializa da erro meu arquivo dhcpd.conf >>>> ficou >>>>>>>>>> assim >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> esse é o caminho em que se encontra o arquivo >>>> /etc/dhcp3/dhcpd.conf >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> # >>>>>>>>>> # Sample configuration file for ISC dhcpd for Debian >>>>>>>>>> # >>>>>>>>>> # Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as >>>>>>>>>> # configuration file instead of this file. >>>>>>>>>> # >>>>>>>>>> # $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $ >>>>>>>>>> # >>>>>>>>>> >>>>>>>>>> # The ddns-updates-style parameter controls whether or not the > server >>>>>>> will >>>>>>>>>> # attempt to do a DNS update when a lease is confirmed. We default > to >>>> the >>>>>>>>>> # behavior of the version 2 packages ('none', since DHCP v2 didn't >>>>>>>>>> # have support for DDNS.) >>>>>>>>>> >>>>>>>>>> ddns-update-style none; >>>>>>>>>> default-lease-time 21600; >>>>>>>>>> max-lease-time 43200; >>>>>>>>>> autoritative; >>>>>>>>>> >>>>>>>>>> subnet 10.1.1.0 netmask 255.255.255.0 { >>>>>>>>>> range 10.1.1.10 10.1.1.14; >>>>>>>>>> option routers 10.1.1.1; >>>>>>>>>> option domain-name-servers 10.10.1.252, 10.10.1.254; >>>>>>>>>> option broadcast-address 10.1.1.255; >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> # If this DHCP server is the official DHCP server for the local >>>>>>>>>> # network, the authoritative directive should be uncommented. >>>>>>>>>> #authoritative; >>>>>>>>>> >>>>>>>>>> # Use this to send dhcp log messages to a different log file (you > also >>>>>>>>>> # have to hack syslog.conf to complete the redirection). >>>>>>>>>> ##log-facility local7; >>>>>>>>>> >>>>>>>>>> # No service will be given on this subnet, but declaring it helps > the >>>>>>>>>> # DHCP server to understand the network topology. >>>>>>>>>> >>>>>>>>>> #subnet 10.152.187.0 netmask 255.255.255.0 { >>>>>>>>>> #} >>>>>>>>>> >>>>>>>>>> # This is a very basic subnet declaration. >>>>>>>>>> >>>>>>>>>> #subnet 10.254.239.0 netmask 255.255.255.224 { >>>>>>>>>> # range 10.254.239.10 10.254.239.20; >>>>>>>>>> # option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org > ; >>>>>>>>>> #} >>>>>>>>>> >>>>>>>>>> # This declaration allows BOOTP clients to get dynamic addresses, >>>>>>>>>> # which we don't really recommend. >>>>>>>>>> >>>>>>>>>> #subnet 10.254.239.32 netmask 255.255.255.224 { >>>>>>>>>> # range dynamic-bootp 10.254.239.40 10.254.239.60; >>>>>>>>>> # option broadcast-address 10.254.239.31; >>>>>>>>>> # option routers rtr-239-32-1.example.org; >>>>>>>>>> #} >>>>>>>>>> >>>>>>>>>> # A slightly different configuration for an internal subnet. >>>>>>>>>> #subnet 10.5.5.0 netmask 255.255.255.224 { >>>>>>>>>> # range 10.5.5.26 10.5.5.30; >>>>>>>>>> # option domain-name-servers ns1.internal.example.org; >>>>>>>>>> # option domain-name "internal.example.org"; >>>>>>>>>> # option routers 10.5.5.1; >>>>>>>>>> # option broadcast-address 10.5.5.31; >>>>>>>>>> # default-lease-time 600; >>>>>>>>>> # max-lease-time 7200; >>>>>>>>>> #} >>>>>>>>>> >>>>>>>>>> # Hosts which require special configuration options can be listed > in >>>>>>>>>> # host statements. If no address is specified, the address will > be >>>>>>>>>> # allocated dynamically (if possible), but the host-specific >>>> information >>>>>>>>>> # will still come from the host declaration. >>>>>>>>>> >>>>>>>>>> #host passacaglia { >>>>>>>>>> # hardware ethernet 0:0:c0:5d:bd:95; >>>>>>>>>> # filename "vmunix.passacaglia"; >>>>>>>>>> # server-name "toccata.fugue.com"; >>>>>>>>>> #} >>>>>>>>>> >>>>>>>>>> # Fixed IP addresses can also be specified for hosts. These >>>> addresses >>>>>>>>>> # should not also be listed as being available for dynamic > assignment. >>>>>>>>>> # Hosts for which fixed IP addresses have been specified can boot >>>> using >>>>>>>>>> # BOOTP or DHCP. Hosts for which no fixed address is specified > can >>>> only >>>>>>>>>> # be booted with DHCP, unless there is an address range on the > subnet >>>>>>>>>> # to which a BOOTP client is connected which has the dynamic-bootp >>>> flag >>>>>>>>>> # set. >>>>>>>>>> #host fantasia { >>>>>>>>>> # hardware ethernet 08:00:07:26:c0:a5; >>>>>>>>>> # fixed-address fantasia.fugue.com; >>>>>>>>>> #} >>>>>>>>>> >>>>>>>>>> # You can declare a class of clients and then do address allocation >>>>>>>>>> # based on that. The example below shows a case where all clients >>>>>>>>>> # in a certain class get addresses on the 10.17.224/24 subnet, and > all >>>>>>>>>> # other clients get addresses on the 10.0.29/24 subnet. >>>>>>>>>> >>>>>>>>>> #class "foo" { >>>>>>>>>> # match if substring (option vendor-class-identifier, 0, 4) = > "SUNW"; >>>>>>>>>> #} >>>>>>>>>> >>>>>>>>>> #shared-network 224-29 { >>>>>>>>>> # subnet 10.17.224.0 netmask 255.255.255.0 { >>>>>>>>>> # option routers rtr-224.example.org; >>>>>>>>>> # } >>>>>>>>>> # subnet 10.0.29.0 netmask 255.255.255.0 { >>>>>>>>>> # option routers rtr-29.example.org; >>>>>>>>>> # } >>>>>>>>>> # pool { >>>>>>>>>> # allow members of "foo"; >>>>>>>>>> # range 10.17.224.10 10.17.224.250; >>>>>>>>>> # } >>>>>>>>>> # pool { >>>>>>>>>> # deny members of "foo"; >>>>>>>>>> # range 10.0.29.10 10.0.29.230; >>>>>>>>>> # } >>>>>>>>>> #} >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> o que esta errado???? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Em 21 de fevereiro de 2011 17:58, Myke Lima <cm...@gm...> >>>>>>> escreveu: >>>>>>>>>> >>>>>>>>>>> Ok, imagem gerada sem problemas, agora falta o dhcp e o tftp >>>>>>>>>>> >>>>>>>>>>> Em 21 de fevereiro de 2011 17:02, Daian Conrad < > da...@op... >>>>>>>>>> escreveu: >>>>>>>>>>> >>>>>>>>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>>>>>>>> Hash: SHA1 >>>>>>>>>>>> >>>>>>>>>>>> Os arquivos parecem estar corretos, faltando somente, compilar a >>>>>>> imagem, >>>>>>>>>>>> ver se vai criar certinho e conferir a configuração do serviço > tftp >>>> e >>>>>>> do >>>>>>>>>>>> dhcp. >>>>>>>>>>>> >>>>>>>>>>>> []s >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Em 21-02-2011 14:59, Myke Lima escreveu: >>>>>>>>>>>>> Deem uma olhada nos meus arquivos de conf, para ver se ta tudo > ok. >>>>>>> antes >>>>>>>>>>>> de >>>>>>>>>>>>> eu gerar o ./build >>>>>>>>>>>>> >>>>>>>>>>>>> lembrando que meus Thinclients são exatamente esses modelos > aqui: >>>>>>>>>>>>> http://www.connec.com.br/site/p01b1.asp >>>>>>>>>>>>> >>>>>>>>>>>>> somente boot PXE e quero carregalos no ts do 2008 r2 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Em 21 de fevereiro de 2011 14:25, Myke Lima <cm...@gm...> >>>>>>>>>>>> escreveu: >>>>>>>>>>>>> >>>>>>>>>>>>>> Qual diretório fica melhor para extrair o pacote >>>>>>>>>>>>>> Thinstation-2.2.2f.tar.bz2? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Em 21 de fevereiro de 2011 10:31, Myke Lima <cm...@gm... >>>> >>>>>>>>>>>> escreveu: >>>>>>>>>>>>>> >>>>>>>>>>>>>> ok, pode deixar, qnd terminar te aviso >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Em 21 de fevereiro de 2011 10:32, Daian Conrad < >>>> da...@op... >>>>>>>>>>>>> escreveu: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>>>>>>>>>>>> Hash: SHA1 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Te aconselharia o Debian, mas o Ububtu é derivado , então jah >>>>>>> serve, >>>>>>>>>>>>>>>> instala o mais básico que puder, depois precisa instalar mais >>>>>>> alguns >>>>>>>>>>>>>>>> pacotes, tftpd, dhcp3-server e o restante que for preciso > vemos >>>>>>>>>>>> durante >>>>>>>>>>>>>>>> o processo. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> depois disso vamos seguir os passos do outro email que passei > ok >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> []s >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Em 21-02-2011 10:17, Myke Lima escreveu: >>>>>>>>>>>>>>>>> Não tem problema, se você me ajudar faço em linux... vou > fazer >>>> o >>>>>>>>>>>>>>>> seguinte >>>>>>>>>>>>>>>>> vou formatar novamente a maquina aqui e começar do zero, > qual >>>>>>> melhor >>>>>>>>>>>>>>>>> distribuição pra instalar, estou instalando o Ubuntu 10.04 > pode >>>>>>> ser >>>>>>>>>>>> ela >>>>>>>>>>>>>>>>> mesma? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Em 21 de fevereiro de 2011 10:17, Daian Conrad < >>>>>>> da...@op... >>>>>>>>>>>>>>>>> escreveu: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Bom, com windows(urrgggg), sei que tem gente que faz, eu >>>>>>>>>>>> infelizmente >>>>>>>>>>>>>>>> só >>>>>>>>>>>>>>>>> posso lhe ajudar se tiver isso em um server linux :). >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Mas acredito que seja parecido(o serviço), o servidor dhcp > deve >>>>>>> ter >>>>>>>>>>>> as >>>>>>>>>>>>>>>>> intruções para TFTP(File Transfer) e/ou apontar para um > server >>>> que >>>>>>>>>>>>>>>> tenha >>>>>>>>>>>>>>>>> esse serviço, no caso do dhcp ser no windows, não tenho >>>>>>> conecimento >>>>>>>>>>>>>>>>> sobre as instruções do PXE, mas acredito que deva ter > tambem. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> []s >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Em 21-02-2011 09:58, Myke Lima escreveu: >>>>>>>>>>>>>>>>>>>> eu parei nessa parte aqui >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de >>>> dhcp >>>>>>>>>>>> que >>>>>>>>>>>>>>>> voce >>>>>>>>>>>>>>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >>>>>>>>>>>> parâmetros >>>>>>>>>>>>>>>> para >>>>>>>>>>>>>>>>>>>> o PXE. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> tenho um servidor DHCP windows que poderia ser usado, mas > e >>>>>>> esse >>>>>>>>>>>>>>>> tftp que >>>>>>>>>>>>>>>>> eu >>>>>>>>>>>>>>>>>>>> não sei... pode ser windows tb ou linux >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Em 21 de fevereiro de 2011 08:56, Daian Conrad < >>>>>>>>>>>> da...@op... >>>>>>>>>>>>>>>>>>>> escreveu: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Bom dia Myke, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Em que parte voce esta tendo problemas , os clientes > iniciam >>>> ?? >>>>>>>>>>>>>>>> aparece >>>>>>>>>>>>>>>>>>>> algum erro ??? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Não tenho nenhum passo a passo, mas acho que no site tem >>>>>>> algumas >>>>>>>>>>>>>>>>>>>> documentações. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Mass, segue uma rápida descrição do processo . . . >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> * - Ter um linux instalado em uma maquina (que vai servir > de >>>>>>>>>>>> server) >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> * - Baixar o source do thinstation em >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>> >>>> > http://sourceforge.net/projects/thinstation/files/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2/download >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> * - Configurar as opções no arquivo build.conf e >>>>>>> thinstation.conf >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> ___ Isso pode ser bem complexo dependendo da solução que >>>> queira >>>>>>>>>>>>>>>>>>>> disponibilizar para os clientes, porem, existem diversos >>>>>>> exemplos >>>>>>>>>>>> de >>>>>>>>>>>>>>>>>>>> configuração no proprio arquivo. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> BUILD.CONF - este arquivo contem as configurações de > kernel >>>> e >>>>>>>>>>>>>>>> sistema >>>>>>>>>>>>>>>>>>>> operacional que sera disponibilizado para os usuários. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> THINSTATION.CONF - este arquivo, contem informações e >>>>>>>>>>>> configurações >>>>>>>>>>>>>>>>>>>> sobre a(s) sessão(ões) que sera iniciado para o > usuario(Ex.: >>>>>>>>>>>>>>>> rdesktop, >>>>>>>>>>>>>>>>>>>> Xnext, ssh, telnet e afins) >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> * - Instalar um serviço de dhcp, ou ter algum servidor de >>>> dhcp >>>>>>>>>>>> que >>>>>>>>>>>>>>>> voce >>>>>>>>>>>>>>>>>>>> possa adicionar o nome/endereço do servidor de tftp e os >>>>>>>>>>>> parâmetros >>>>>>>>>>>>>>>> para >>>>>>>>>>>>>>>>>>>> o PXE. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Depois disso, as estações jah estarão habilitadas a > iniciar >>>> na >>>>>>>>>>>> rede, >>>>>>>>>>>>>>>>>>>> lembrando que ajustes podem ser necessários para > ambientes >>>> mais >>>>>>>>>>>>>>>>>>>> complexos, no seu caso, para iniciar somente o rdesktop, > em >>>>>>>>>>>> teoria é >>>>>>>>>>>>>>>>>>>> tranquilo. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Qualquer coisa posta os erros aqui na lista, e não > desiste >>>> não, >>>>>>>>>>>>>>>>>>>> lembre-se . . . >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> o caminho e cheio de pedras, e se voce não tirá-las da > sua >>>>>>>>>>>> frente, >>>>>>>>>>>>>>>>>>>> sempre terá o dedão machucado ;-) . >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> []s >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Em 21-02-2011 08:07, Myke Lima escreveu: >>>>>>>>>>>>>>>>>>>>>>> bom dia pessoal, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> eu já desisti, não dou conta, estou disposto a pagar > pra >>>>>>>>>>>> alguem >>>>>>>>>>>>>>>> me >>>>>>>>>>>>>>>>> ajudar >>>>>>>>>>>>>>>>>>>> ou >>>>>>>>>>>>>>>>>>>>>>> fazer um passo-a-passo pra eu conseguir colocar os >>>>>>> thinclients >>>>>>>>>>>>>>>> aqui >>>>>>>>>>>>>>>>> pra >>>>>>>>>>>>>>>>>>>> dar >>>>>>>>>>>>>>>>>>>>>>> boot via PXE e conectar no ts 2008 r2. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> desde já agradeço. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>> >>>> > ------------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) >>>>>>> Parallel >>>>>>>>>>>>>>>> Studio >>>>>>>>>>>>>>>>> XE: >>>>>>>>>>>>>>>>>>>>>>> Pinpoint memory and threading errors before they > happen. >>>>>>>>>>>>>>>>>>>>>>> Find and fix more than 250 security defects in the >>>>>>> development >>>>>>>>>>>>>>>> cycle. >>>>>>>>>>>>>>>>>>>>>>> Locate bottlenecks in serial and parallel code that > limit >>>>>>>>>>>>>>>> performance. >>>>>>>>>>>>>>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>> >>>> > ------------------------------------------------------------------------------ >>>>>>>>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) > Parallel >>>>>>>>>>>> Studio >>>>>>>>>>>>>>>> XE: >>>>>>>>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>>>>>>>> Find and fix more than 250 security defects in the > development >>>>>>>>>>>> cycle. >>>>>>>>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>>>>>>>> performance. >>>>>>>>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>>>> >>>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>> >>>> > ------------------------------------------------------------------------------ >>>>>>>>>>>>>>>> The ultimate all-in-one performance toolkit: Intel(R) > Parallel >>>>>>> Studio >>>>>>>>>>>> XE: >>>>>>>>>>>>>>>> Pinpoint memory and threading errors before they happen. >>>>>>>>>>>>>>>> Find and fix more than 250 security defects in the > development >>>>>>> cycle. >>>>>>>>>>>>>>>> Locate bottlenecks in serial and parallel code that limit >>>>>>>>>>>> performance. >>>>>>>>>>>>>>>> http://p.sf.net/sfu/intel-dev2devfeb >>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>>> >>>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> - -- >>>>>>>>>>>>>>>> ======================= >>>>>>>>>>>>>>>> *** Daian Conrad >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Linux user: #248912 >>>>>>>>>>>>>>>> PGP/GPG: 0x7E25E948 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> ** OpenS Team (DaCoD) >>>>>>>>>>>>>>>> E-mail: da...@op... >>>>>>>>>>>>>>>> Fone: +55 48 3954-8000 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>> >>>>>>>> >>>>>>>> >>>> - >>>> >>>> > ------------------------------------------------------------------------------ >>>> Index, Search & Analyze Logs and other IT data in Real-Time with Splunk >>>> Collect, index and harness all the fast moving IT data generated by your >>>> applications, servers and devices whether physical, virtual or in the >>>> cloud. >>>> Deliver compliance at lower cost and gain new business insights. >>>> Free Software Download: http://p.sf.net/sfu/splunk-dev2dev >>>> _______________________________________________ >>>> Thinstation-portuguese mailing list >>>> Thi...@li... >>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>> >>>> >>>>> >>>>> > - > > ------------------------------------------------------------------------------ > Free Software Download: Index, Search & Analyze Logs and other IT data in > Real-Time with Splunk. Collect, index and harness all the fast moving IT > data > generated by your applications, servers and devices whether physical, > virtual > or in the cloud. Deliver compliance at lower cost and gain new business > insights. http://p.sf.net/sfu/splunk-dev2dev > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>> > >> >> - ------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev _______________________________________________ Thinstation-portuguese mailing list Thi...@li... https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNZUnYAAoJEKPh7Uh+JelIf9kH/1KH2sqKJJ/zmYJjd/GCi167 BVMcm9KUKzC3HIkKKzJo8DxHp5U0sTtWNPpJ+/gWBlDDiF+sIAehQu0+xi+hhobw H5mJyDqsdp+6c9AEI7mnMzD1SscCMmrCNO2gGyDvAZXOMIX3ae4aaU7Vcvvi145o OWwZIPbE4xvm31cdoxyVnBgKqvEw+H7GRIjwCGVFQm3LbrPek3Gnbs/9e66CSkjO WfzQNo3V/xe3uc/SRlIEvYpqYWqb7/QpKCR1OLDV9XKgmCk8PUziuKmVmiTEsS4n uM2wAf6IlZxyMEsro1t11DA9u3T6smDeO0I9jP31WcYy87Oog9Z5r3HBXtMRd2w= =np/1 -----END PGP SIGNATURE----- |
From: Myke L. <cm...@gm...> - 2011-02-23 18:41:44
|
Certo, já baixei configurei os arquivos conf e gerei a imagem eu baixei desconpactei o thinstation no seguinte diretorio /var/lib/tftpboot/thinstation-2.2.2f agora o que eu preciso alterar pois meu arquivo de dhcp esta igual o abaixo preciso mudar a imagem gerada de diretorio a pasta ou o proprio arquivo dhcp? caso seja mover alguma pasta ou arquivo qual o comando para fazer isso? #### INICIO allow booting; allow bootp; default-lease-time 2160000; max-lease-time 21600000; authoritative; subnet 10.1.1.0 netmask 255.255.255.0 { range 10.1.1.160 10.1.1.170; option routers 10.1.1.1 ; option domain-name-servers 10.10.1.252, 10.10.1.254; option domain-name "nome-da-rede"; next-server 10.1.1.3; option root-path "/tftpboot"; filename "boot-images/pxe/pxelinux.0"; if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; } } Em 23 de fevereiro de 2011 14:54, Daian Conrad <da...@op...>escreveu: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > use o wget > > wget -c > > http://ufpr.dl.sourceforge.net/project/thinstation/thinstation/thinstation-2.2/Thinstation-2.2.2f.tar.bz2 > > > []s > > |
From: Daian C. <da...@op...> - 2011-02-23 19:20:42
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Só mude a linha abaixo para o diretório correto . . . option root-path "/tftpboot"; para option root-path "/var/lib/tftpboot"; e reiniciar o serviço do dhcp3-server . . . e testar é claro :) []s Em 23-02-2011 15:41, Myke Lima escreveu: > option root-path "/tftpboot"; - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNZV6/AAoJEKPh7Uh+JelIfD8H/jcwkv/aBw5Siy0zUxUYxCFZ S7kgCQHv7C1zN4gfbzLL0qf0/6aMcc/eKCtLwhZmFKC3sUZHJndyVSIqZTHe1kZg xcgmCbbskuBUgvRiDAqIP7+37XdmxSt6dQ8XaHLtGzfRZiXaTaTFKdmHXgi0UmJw hzJUJGuhEE83ItweyK+gmTFKufefDgfgKg0haxrj3MQS51j6p3CHLqet4yO2fj2C Z/MviEC8lmGvbUzsgryrUIWtGu8vs9VxuGcHaD1W5myOesK73OxJZDTEEjuXNxTX h9anNiBEAECz8wPVpKmwrCHQN/blPlaEBZo2Boh2xvrDhOWvAt9uA+Vb390Rnoc= =pSek -----END PGP SIGNATURE----- |
From: Myke L. <cm...@gm...> - 2011-02-23 19:34:49
|
hum.. estranho fiz isso e não deu certo ele achou o servidor dhcp atribuiu ip achou o servidor tftp mas não achou o arquivo apareceu as seguintes mensagens: file not foun tftp error - file not found exiting bootmanage pxe rom e agora? 2011/2/23 Daian Conrad <da...@op...> > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Só mude a linha abaixo para o diretório correto . . . > > option root-path "/tftpboot"; > > para > > option root-path "/var/lib/tftpboot"; > > e reiniciar o serviço do dhcp3-server . . . > > > e testar é claro :) > > > > []s > > Em 23-02-2011 15:41, Myke Lima escreveu: > > option root-path "/tftpboot"; > > - -- > ======================= > *** Daian Conrad > > Linux user: #248912 > PGP/GPG: 0x7E25E948 > > ** OpenS Team (DaCoD) > E-mail: da...@op... > Fone: +55 48 3954-8000 > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.10 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iQEcBAEBAgAGBQJNZV6/AAoJEKPh7Uh+JelIfD8H/jcwkv/aBw5Siy0zUxUYxCFZ > S7kgCQHv7C1zN4gfbzLL0qf0/6aMcc/eKCtLwhZmFKC3sUZHJndyVSIqZTHe1kZg > xcgmCbbskuBUgvRiDAqIP7+37XdmxSt6dQ8XaHLtGzfRZiXaTaTFKdmHXgi0UmJw > hzJUJGuhEE83ItweyK+gmTFKufefDgfgKg0haxrj3MQS51j6p3CHLqet4yO2fj2C > Z/MviEC8lmGvbUzsgryrUIWtGu8vs9VxuGcHaD1W5myOesK73OxJZDTEEjuXNxTX > h9anNiBEAECz8wPVpKmwrCHQN/blPlaEBZo2Boh2xvrDhOWvAt9uA+Vb390Rnoc= > =pSek > -----END PGP SIGNATURE----- > > > ------------------------------------------------------------------------------ > Free Software Download: Index, Search & Analyze Logs and other IT data in > Real-Time with Splunk. Collect, index and harness all the fast moving IT > data > generated by your applications, servers and devices whether physical, > virtual > or in the cloud. Deliver compliance at lower cost and gain new business > insights. http://p.sf.net/sfu/splunk-dev2dev > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > |
From: Daian C. <da...@op...> - 2011-02-23 20:02:27
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 provavelmente as configurações do seu tftp devem estar apontando para outro diretorio, jah conferiu isso ? []s Em 23-02-2011 16:34, Myke Lima escreveu: > hum.. estranho fiz isso e não deu certo > > ele achou o servidor dhcp atribuiu ip achou o servidor tftp mas não achou o > arquivo > > apareceu as seguintes mensagens: > > file not foun > tftp error - file not found > exiting bootmanage pxe rom > > e agora? > > > > 2011/2/23 Daian Conrad <da...@op...> > > Só mude a linha abaixo para o diretório correto . . . > > option root-path "/tftpboot"; > > para > > option root-path "/var/lib/tftpboot"; > > e reiniciar o serviço do dhcp3-server . . . > > > e testar é claro :) > > > > []s > > Em 23-02-2011 15:41, Myke Lima escreveu: >>>> option root-path "/tftpboot"; > >> >> - ------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev _______________________________________________ Thinstation-portuguese mailing list Thi...@li... https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNZWiNAAoJEKPh7Uh+JelIVuoIAKrBZKBoagxMUKPRIqljzHCU 6cjc97f8Ow11hsslTAOHv64928R5ZZcdAnvyohLFF0hBSoc1NouI+D50YURlSp2h tNHKM0c6ZitQTC9FIrhld0OcoyRtpwwOAkXiKxus2zOHZM4+ODGuBT9yhJyzIddr GFVHozhvkKm55KMFDf1Kvtze/RhwMHJyWlcy6iRv+kbM1vUMKeFH9cBuUjvDJDE3 tMgo+98LVEWvvWhW/32dzoDCBd5tYC7En/v+jQhHXC+JihFALqD7DvRTMMvcPNNC hy8VZfWvtPr/54cXdeWzjINuQcMuBgVIgzBObYOOT4UWjYe5PDuOKPzyscp30XQ= =TaWa -----END PGP SIGNATURE----- |
From: Myke L. <cm...@gm...> - 2011-02-23 20:08:00
|
*se for o arquivo esse arquivo /etc/default/tftpd-hpa* a conf dele ta do seguinte maneira: RUN_DAEMON=”yes” TFTP_USERNAME=”tftp” TFTP_DIRECTORY=”/var/lib/tftpboot” TFTP_ADDRESS=”10.1.1.3:69” TFTP_OPTION=”–secure” se não for esse arquivo qual seria? 2011/2/23 Daian Conrad <da...@op...> > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > provavelmente as configurações do seu tftp devem estar apontando para > outro diretorio, jah conferiu isso ? > > []s > > > Em 23-02-2011 16:34, Myke Lima escreveu: > > hum.. estranho fiz isso e não deu certo > > > > ele achou o servidor dhcp atribuiu ip achou o servidor tftp mas não achou > o > > arquivo > > > > apareceu as seguintes mensagens: > > > > file not foun > > tftp error - file not found > > exiting bootmanage pxe rom > > > > e agora? > > > > > > > > 2011/2/23 Daian Conrad <da...@op...> > > > > Só mude a linha abaixo para o diretório correto . . . > > > > option root-path "/tftpboot"; > > > > para > > > > option root-path "/var/lib/tftpboot"; > > > > e reiniciar o serviço do dhcp3-server . . . > > > > > > e testar é claro :) > > > > > > > > []s > > > > Em 23-02-2011 15:41, Myke Lima escreveu: > >>>> option root-path "/tftpboot"; > > > >> > >> > - > > ------------------------------------------------------------------------------ > Free Software Download: Index, Search & Analyze Logs and other IT data in > Real-Time with Splunk. Collect, index and harness all the fast moving IT > data > generated by your applications, servers and devices whether physical, > virtual > or in the cloud. Deliver compliance at lower cost and gain new business > insights. http://p.sf.net/sfu/splunk-dev2dev > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >> > > - -- > ======================= > *** Daian Conrad > > Linux user: #248912 > PGP/GPG: 0x7E25E948 > > ** OpenS Team (DaCoD) > E-mail: da...@op... > Fone: +55 48 3954-8000 > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.10 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iQEcBAEBAgAGBQJNZWiNAAoJEKPh7Uh+JelIVuoIAKrBZKBoagxMUKPRIqljzHCU > 6cjc97f8Ow11hsslTAOHv64928R5ZZcdAnvyohLFF0hBSoc1NouI+D50YURlSp2h > tNHKM0c6ZitQTC9FIrhld0OcoyRtpwwOAkXiKxus2zOHZM4+ODGuBT9yhJyzIddr > GFVHozhvkKm55KMFDf1Kvtze/RhwMHJyWlcy6iRv+kbM1vUMKeFH9cBuUjvDJDE3 > tMgo+98LVEWvvWhW/32dzoDCBd5tYC7En/v+jQhHXC+JihFALqD7DvRTMMvcPNNC > hy8VZfWvtPr/54cXdeWzjINuQcMuBgVIgzBObYOOT4UWjYe5PDuOKPzyscp30XQ= > =TaWa > -----END PGP SIGNATURE----- > > > ------------------------------------------------------------------------------ > Free Software Download: Index, Search & Analyze Logs and other IT data in > Real-Time with Splunk. Collect, index and harness all the fast moving IT > data > generated by your applications, servers and devices whether physical, > virtual > or in the cloud. Deliver compliance at lower cost and gain new business > insights. http://p.sf.net/sfu/splunk-dev2dev > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > |
From: Daian C. <da...@op...> - 2011-02-23 20:12:44
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Foi mal cara, não percebi a linha do PXE, tem um caminho errado ali no dhcp mesmo. filename "boot-images/pxe/pxelinux.0"; esse caminho é para o binario do PXE, voce deve colocar o caminho onde se encontra o seu, partindo do /var/lib/tftpboot. EX.: se o arquivo estiver em /var/lib/tftpboot/pxelinuc.cfg/pxelinux.0 o caminho correto seria . . . filename "pxelinux.cfg/pxelinux.0"; []s Em 23-02-2011 17:07, Myke Lima escreveu: > *se for o arquivo esse arquivo /etc/default/tftpd-hpa* > > a conf dele ta do seguinte maneira: > > RUN_DAEMON=”yes” > TFTP_USERNAME=”tftp” > TFTP_DIRECTORY=”/var/lib/tftpboot” > TFTP_ADDRESS=”10.1.1.3:69” > TFTP_OPTION=”–secure” > > se não for esse arquivo qual seria? > > > > 2011/2/23 Daian Conrad <da...@op...> > > provavelmente as configurações do seu tftp devem estar apontando para > outro diretorio, jah conferiu isso ? > > []s > > > Em 23-02-2011 16:34, Myke Lima escreveu: >>>> hum.. estranho fiz isso e não deu certo >>>> >>>> ele achou o servidor dhcp atribuiu ip achou o servidor tftp mas não achou > o >>>> arquivo >>>> >>>> apareceu as seguintes mensagens: >>>> >>>> file not foun >>>> tftp error - file not found >>>> exiting bootmanage pxe rom >>>> >>>> e agora? >>>> >>>> >>>> >>>> 2011/2/23 Daian Conrad <da...@op...> >>>> >>>> Só mude a linha abaixo para o diretório correto . . . >>>> >>>> option root-path "/tftpboot"; >>>> >>>> para >>>> >>>> option root-path "/var/lib/tftpboot"; >>>> >>>> e reiniciar o serviço do dhcp3-server . . . >>>> >>>> >>>> e testar é claro :) >>>> >>>> >>>> >>>> []s >>>> >>>> Em 23-02-2011 15:41, Myke Lima escreveu: >>>>>>> option root-path "/tftpboot"; >>>> >>>>> >>>>> > - > > ------------------------------------------------------------------------------ > Free Software Download: Index, Search & Analyze Logs and other IT data in > Real-Time with Splunk. Collect, index and harness all the fast moving IT > data > generated by your applications, servers and devices whether physical, > virtual > or in the cloud. Deliver compliance at lower cost and gain new business > insights. http://p.sf.net/sfu/splunk-dev2dev > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>> > >> >> - ------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev _______________________________________________ Thinstation-portuguese mailing list Thi...@li... https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >> - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNZWrxAAoJEKPh7Uh+JelIPBQH/35tJQm9uMLMKvXRt4V+DvHc /DEa3+agF/3fnuSy9KPBXh9m4M5KA/VbIdPTeniK+ap0h4o4ZzGiQli4G9/uBAW+ IPCSkQ2yHjtME4ElgkR4PzYcCDMa3t0C7eZ2rN7q3Cit/WmqvOp/Q4MQdkYcC7r1 cIXLm3mImHVtHfOJjI2tKNwKKHO+FnRX5JrFGBM1J220bcvcfHMYLtT+pKEfy5a+ 8K5hswTeoZzHw6Dp652xGBnOTm4HyHBFfDoHJ5oVbAAZGCjc12XXOdJ8hCiLHjVy Qf66q3FbssVxUbnR4LOYTZ/9Fd/nXft2eZ8kEQI78mLBCAuJOD2JnNn8H7PdGUQ= =pZ4B -----END PGP SIGNATURE----- |
From: Myke L. <cm...@gm...> - 2011-02-23 20:22:20
|
correto entendi, meu arquivo pxelinux.0 esta no seguinte diretorio /var/lib/tftpboot/Thinstation-2.2.2f/boot-images/pxe/pxelinux.0 então minha config ficou: option root-path "/var/lib/tftpboot"; filename "Thinstation-2.2.2f/boot-images/pxe/pxelinux.0"; mas continua com o mesmo erro não encontra o arquivo o que mais poderia estar errado? 2011/2/23 Daian Conrad <da...@op...> > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Foi mal cara, não percebi a linha do PXE, tem um caminho errado ali no > dhcp mesmo. > > filename "boot-images/pxe/pxelinux.0"; > > esse caminho é para o binario do PXE, voce deve colocar o caminho onde > se encontra o seu, partindo do /var/lib/tftpboot. > > EX.: se o arquivo estiver em /var/lib/tftpboot/pxelinuc.cfg/pxelinux.0 o > caminho correto seria . . . > > filename "pxelinux.cfg/pxelinux.0"; > > > []s > > > Em 23-02-2011 17:07, Myke Lima escreveu: > > *se for o arquivo esse arquivo /etc/default/tftpd-hpa* > > > > a conf dele ta do seguinte maneira: > > > > RUN_DAEMON=”yes” > > TFTP_USERNAME=”tftp” > > TFTP_DIRECTORY=”/var/lib/tftpboot” > > TFTP_ADDRESS=”10.1.1.3:69” > > TFTP_OPTION=”–secure” > > > > se não for esse arquivo qual seria? > > > > > > > > 2011/2/23 Daian Conrad <da...@op...> > > > > provavelmente as configurações do seu tftp devem estar apontando para > > outro diretorio, jah conferiu isso ? > > > > []s > > > > > > Em 23-02-2011 16:34, Myke Lima escreveu: > >>>> hum.. estranho fiz isso e não deu certo > >>>> > >>>> ele achou o servidor dhcp atribuiu ip achou o servidor tftp mas não > achou > > o > >>>> arquivo > >>>> > >>>> apareceu as seguintes mensagens: > >>>> > >>>> file not foun > >>>> tftp error - file not found > >>>> exiting bootmanage pxe rom > >>>> > >>>> e agora? > >>>> > >>>> > >>>> > >>>> 2011/2/23 Daian Conrad <da...@op...> > >>>> > >>>> Só mude a linha abaixo para o diretório correto . . . > >>>> > >>>> option root-path "/tftpboot"; > >>>> > >>>> para > >>>> > >>>> option root-path "/var/lib/tftpboot"; > >>>> > >>>> e reiniciar o serviço do dhcp3-server . . . > >>>> > >>>> > >>>> e testar é claro :) > >>>> > >>>> > >>>> > >>>> []s > >>>> > >>>> Em 23-02-2011 15:41, Myke Lima escreveu: > >>>>>>> option root-path "/tftpboot"; > >>>> > >>>>> > >>>>> > > - > > > > > ------------------------------------------------------------------------------ > > Free Software Download: Index, Search & Analyze Logs and other IT data in > > Real-Time with Splunk. Collect, index and harness all the fast moving IT > > data > > generated by your applications, servers and devices whether physical, > > virtual > > or in the cloud. Deliver compliance at lower cost and gain new business > > insights. http://p.sf.net/sfu/splunk-dev2dev > > _______________________________________________ > > Thinstation-portuguese mailing list > > Thi...@li... > > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >>>>> > > > >> > >> > - > > ------------------------------------------------------------------------------ > Free Software Download: Index, Search & Analyze Logs and other IT data in > Real-Time with Splunk. Collect, index and harness all the fast moving IT > data > generated by your applications, servers and devices whether physical, > virtual > or in the cloud. Deliver compliance at lower cost and gain new business > insights. http://p.sf.net/sfu/splunk-dev2dev > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > >> > > - -- > ======================= > *** Daian Conrad > > Linux user: #248912 > PGP/GPG: 0x7E25E948 > > ** OpenS Team (DaCoD) > E-mail: da...@op... > Fone: +55 48 3954-8000 > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.10 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iQEcBAEBAgAGBQJNZWrxAAoJEKPh7Uh+JelIPBQH/35tJQm9uMLMKvXRt4V+DvHc > /DEa3+agF/3fnuSy9KPBXh9m4M5KA/VbIdPTeniK+ap0h4o4ZzGiQli4G9/uBAW+ > IPCSkQ2yHjtME4ElgkR4PzYcCDMa3t0C7eZ2rN7q3Cit/WmqvOp/Q4MQdkYcC7r1 > cIXLm3mImHVtHfOJjI2tKNwKKHO+FnRX5JrFGBM1J220bcvcfHMYLtT+pKEfy5a+ > 8K5hswTeoZzHw6Dp652xGBnOTm4HyHBFfDoHJ5oVbAAZGCjc12XXOdJ8hCiLHjVy > Qf66q3FbssVxUbnR4LOYTZ/9Fd/nXft2eZ8kEQI78mLBCAuJOD2JnNn8H7PdGUQ= > =pZ4B > -----END PGP SIGNATURE----- > > > ------------------------------------------------------------------------------ > Free Software Download: Index, Search & Analyze Logs and other IT data in > Real-Time with Splunk. Collect, index and harness all the fast moving IT > data > generated by your applications, servers and devices whether physical, > virtual > or in the cloud. Deliver compliance at lower cost and gain new business > insights. http://p.sf.net/sfu/splunk-dev2dev > _______________________________________________ > Thinstation-portuguese mailing list > Thi...@li... > https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese > |
From: Daian C. <da...@op...> - 2011-02-28 16:45:52
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Tentou remover a opção -u ?? []s Em 28-02-2011 11:36, Myke Lima escreveu: > bom dia pessoal, > estou ainda apanhando aqui, meu thinstation.conf.buildtime esta da seguinte > forma: > > > KEYBOARD_MAP=pt_br > DAILY_REBOOT=On > RECONNECT_PROMPT=ON > SCREEN=0 > WORKSPACE=1 > AUTOSTART=On > ICONMODE=AUTO > SESSION_0_TYPE=freerdp > SESSION_0_AUTOSTART=ON > SESSION_0_SCREEN=1 > SESSION_0_FREERDP_SERVER=10.10.1.20 > SESSION_0_FREERDP_OPTIONS="-u ' ' -a 15 -d meudominio" > SCREEN_RESOLUTION="1024x768" > SCREEN_COLOR_DEPTH="15" > > > o que esta acontecendo é o seguinte, ele carrega o ts do 2008 mas sempre > tenho que digitar meudominio\ antes do nome do usuario pois ele carrega > direto nomedamaquina\root ja cai direto pra digitar a senha, alguem sabe > como alterar isso? quero apenas ter q digitar o usuario e senha. > > > > > > > > > Em 26 de fevereiro de 2011 10:58, Myke Lima <cm...@gm...> escreveu: > >> só para esclarecer, formatei a maquina denovo configurei tudo do 0, >> >> gerei a imagem no site e joguei na pasta ai sim deu certo deu o boot, mas >> como estava em teste mandei logar numa maquina XP, agora vou fazer as >> mudanças necessárias para logar no ip do 2008 r2 >> >> >> >> até então deu tudo certo qualquer dúvida posto aqui novamente.. >> >> >> >> >> >> >> Em 25 de fevereiro de 2011 18:14, Daian Conrad <da...@op...>escreveu: >> >> -----BEGIN PGP SIGNED MESSAGE----- >>> Hash: SHA1 >>> >>> Estes logs servem sim ............ >>> vamos destrinchar um pouco :D >>> >>> >>> Esta é a sequencia que o cliente busca no server >>> >>> 10.1.1.164 <10.1.1.3> pxelinux.0 >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/56424f58-0000-0000-0000-080027af0 >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/01-08-00-27-af-01-a5 >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/0A0101A4 >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/0A0101A >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/0A0101 >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/0A010 >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/0A01 >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/0A0 >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/0A >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/0 >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/default >>> 10.1.1.164 <10.1.1.3> diag/vesamenu.c32 >>> 10.1.1.164 <10.1.1.3> pxelinux.cfg/default >>> 10.1.1.164 <10.1.1.3> ts_bg.jpg >>> 10.1.1.164 <10.1.1.3> vmlinuz >>> 10.1.1.164 <10.1.1.3> initrd >>> >>> >>> Aparentemente ele não esta passando do initrd, deve ter alguma coisa >>> ainda na sua imagem que não esta legal, não consegui ver o modelo dos >>> thinclients que esta usando, o link não abre :-( . . . pode ser tmb >>> algum parâmetro que esta configurado em "pxelinux.cfg/default" , outro >>> teste que pode fazer , é gerar uma imagem on-line e salvar o VMLINUZ e o >>> INITRD sobrescrevendo os atuais. >>> >>> Tlvz resolva seu problema com a imagem ;-) >>> >>> >>> Em 25-02-2011 14:23, Myke Lima escreveu: >>>> não sei se serve de alguma coisa mas procurei na net e dei esse comando >>> o >>>> resultado ta abaixo >>>> >>>> >>>> root@SRVDHCP:/etc# tcpdump port 69 -v >>>> >>>> tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 96 >>>> bytes >>>> 13:22:04.115738 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 60) >>>> 10.1.1.164.2001 > 10.1.1.3.tftp: 32 RRQ "pxelinux.0" octet blksize >>> 1432 >>>> 13:22:04.232202 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 107) >>>> 10.1.1.164.57089 > 10.1.1.3.tftp: 79 RRQ >>>> "pxelinux.cfg/56424f58-0000-0000-0000-080027af0" [|tftp] >>>> 13:22:04.238420 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 91) >>>> 10.1.1.164.57090 > 10.1.1.3.tftp: 63 RRQ >>>> "pxelinux.cfg/01-08-00-27-af-01-a5" octet tsize >>>> 13:22:04.243420 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 79) >>>> 10.1.1.164.57091 > 10.1.1.3.tftp: 51 RRQ "pxelinux.cfg/0A0101A4" >>> octet >>>> tsize 0 blksize 14 >>>> 13:22:04.248400 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 78) >>>> 10.1.1.164.57092 > 10.1.1.3.tftp: 50 RRQ "pxelinux.cfg/0A0101A" >>> octet >>>> tsize 0 blksize 140 >>>> 13:22:04.253273 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 77) >>>> 10.1.1.164.57093 > 10.1.1.3.tftp: 49 RRQ "pxelinux.cfg/0A0101" >>> octet >>>> tsize 0 blksize 1408 >>>> 13:22:04.258139 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 76) >>>> 10.1.1.164.57094 > 10.1.1.3.tftp: 48 RRQ "pxelinux.cfg/0A010" octet >>>> tsize 0 blksize 1408 >>>> 13:22:04.262880 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 75) >>>> 10.1.1.164.57095 > 10.1.1.3.tftp: 47 RRQ "pxelinux.cfg/0A01" octet >>>> tsize 0 blksize 1408 >>>> 13:22:04.267505 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 74) >>>> 10.1.1.164.57096 > 10.1.1.3.tftp: 46 RRQ "pxelinux.cfg/0A0" octet >>> tsize >>>> 0 blksize 1408 >>>> 13:22:04.272007 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 73) >>>> 10.1.1.164.57097 > 10.1.1.3.tftp: 45 RRQ "pxelinux.cfg/0A" octet >>> tsize >>>> 0 blksize 1408 >>>> 13:22:04.276514 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 72) >>>> 10.1.1.164.57098 > 10.1.1.3.tftp: 44 RRQ "pxelinux.cfg/0" octet >>> tsize 0 >>>> blksize 1408 >>>> 13:22:04.281526 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 78) >>>> 10.1.1.164.57099 > 10.1.1.3.tftp: 50 RRQ "pxelinux.cfg/default" >>> octet >>>> tsize 0 blksize 140 >>>> 13:22:04.293463 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 75) >>>> 10.1.1.164.57100 > 10.1.1.3.tftp: 47 RRQ "diag/vesamenu.c32" octet >>>> tsize 0 blksize 1408 >>>> 13:22:04.394604 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 78) >>>> 10.1.1.164.57101 > 10.1.1.3.tftp: 50 RRQ "pxelinux.cfg/default" >>> octet >>>> tsize 0 blksize 140 >>>> 13:22:04.460384 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 67) >>>> 10.1.1.164.57102 > 10.1.1.3.tftp: 39 RRQ "ts_bg.jpg" octet tsize 0 >>>> blksize 1408 >>>> 13:22:07.410224 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 65) >>>> 10.1.1.164.57103 > 10.1.1.3.tftp: 37 RRQ "vmlinuz" octet tsize 0 >>>> blksize 1408 >>>> 13:22:08.174756 IP (tos 0x0, ttl 60, id 0, offset 0, flags [none], proto >>> UDP >>>> (17), length 64) >>>> 10.1.1.164.57104 > 10.1.1.3.tftp: 36 RRQ "initrd" octet tsize 0 >>> blksize >>>> 1408 >>>> >>>> >>>> Em 25 de fevereiro de 2011 14:11, Myke Lima <cm...@gm...> >>> escreveu: >>>> >>>>> achei somente isso... não achei nada referente a tftp >>>>> >>>>> >>>>> Feb 25 13:03:41 SRVDHCP dhcpd: DHCPREQUEST for 10.1.1.167 (10.1.1.2) >>> from >>>>> 00:40:ca:a8:cc:84 via eth1: lease 10.1.1.167 unavailable. >>>>> Feb 25 13:03:41 SRVDHCP dhcpd: DHCPNAK on 10.1.1.167 to >>> 00:40:ca:a8:cc:84 >>>>> via eth1 >>>>> Feb 25 13:05:30 SRVDHCP dhcpd: DHCPDISCOVER from 08:00:27:af:01:a5 via >>> eth1 >>>>> Feb 25 13:05:31 SRVDHCP dhcpd: DHCPOFFER on 10.1.1.164 to >>> 08:00:27:af:01:a5 >>>>> via eth1 >>>>> Feb 25 13:05:33 SRVDHCP dhcpd: DHCPREQUEST for 10.1.1.150 (10.1.1.135) >>> from >>>>> 08:00:27:af:01:a5 via eth1: unknown lease 10.1.1.150. >>>>> Feb 25 13:05:43 SRVDHCP dhcpd: DHCPDISCOVER from 08:00:27:af:01:a5 via >>> eth1 >>>>> Feb 25 13:05:43 SRVDHCP dhcpd: DHCPOFFER on 10.1.1.164 to >>> 08:00:27:af:01:a5 >>>>> via eth1 >>>>> Feb 25 13:05:45 SRVDHCP dhcpd: DHCPREQUEST for 10.1.1.150 (10.1.1.135) >>> from >>>>> 08:00:27:af:01:a5 via eth1: unknown lease 10.1.1.150. >>>>> Feb 25 13:06:00 SRVDHCP dhcpd: DHCPDISCOVER from 08:00:27:af:01:a5 via >>> eth1 >>>>> Feb 25 13:06:00 SRVDHCP dhcpd: DHCPOFFER on 10.1.1.164 to >>> 08:00:27:af:01:a5 >>>>> via eth1 >>>>> Feb 25 13:06:02 SRVDHCP dhcpd: DHCPREQUEST for 10.1.1.164 (10.1.1.3) >>> from >>>>> 08:00:27:af:01:a5 via eth1 >>>>> Feb 25 13:06:02 SRVDHCP dhcpd: DHCPACK on 10.1.1.164 to >>> 08:00:27:af:01:a5 >>>>> via eth1 >>>>> Feb 25 13:06:45 SRVDHCP dhcpd: DHCPDISCOVER from 00:40:ca:a8:d8:4c via >>> eth1 >>>>> Feb 25 13:06:45 SRVDHCP dhcpd: ICMP Echo reply while lease 10.1.1.163 >>>>> valid. >>>>> Feb 25 13:06:45 SRVDHCP dhcpd: Abandoning IP address 10.1.1.163: >>> pinged >>>>> before offer >>>>> Feb 25 13:06:47 SRVDHCP dhcpd: DHCPREQUEST for 10.1.1.234 (10.1.1.2) >>> from >>>>> 00:40:ca:a8:d8:4c via eth1: unknown lease 10.1.1.234. >>>>> Feb 25 13:07:02 SRVDHCP dhcpd: DHCPDISCOVER from 00:40:ca:a8:d8:4c via >>> eth1 >>>>> Feb 25 13:07:02 SRVDHCP dhcpd: DHCPREQUEST for 10.1.1.234 (10.1.1.2) >>> from >>>>> 00:40:ca:a8:d8:4c via eth1: unknown lease 10.1.1.234. >>>>> Feb 25 13:07:03 SRVDHCP dhcpd: DHCPOFFER on 10.1.1.169 to >>> 00:40:ca:a8:d8:4c >>>>> via eth1 >>>>> Feb 25 13:07:09 SRVDHCP dhcpd: DHCPDISCOVER from 00:40:ca:a8:cf:f5 via >>> eth1 >>>>> Feb 25 13:07:09 SRVDHCP dhcpd: ICMP Echo reply while lease 10.1.1.168 >>>>> valid. >>>>> Feb 25 13:07:09 SRVDHCP dhcpd: Abandoning IP address 10.1.1.168: >>> pinged >>>>> before offer >>>>> Feb 25 13:07:12 SRVDHCP dhcpd: DHCPREQUEST for 10.1.1.166 (10.1.1.2) >>> from >>>>> 00:40:ca:a8:cf:f5 via eth1: lease 10.1.1.166 unavailable. >>>>> Feb 25 13:07:12 SRVDHCP dhcpd: DHCPNAK on 10.1.1.166 to >>> 00:40:ca:a8:cf:f5 >>>>> via eth1 >>>>> Feb 25 13:07:27 SRVDHCP dhcpd: DHCPDISCOVER from 00:40:ca:a8:cf:f5 via >>> eth1 >>>>> Feb 25 13:07:27 SRVDHCP dhcpd: DHCPREQUEST for 10.1.1.166 (10.1.1.2) >>> from >>>>> 00:40:ca:a8:cf:f5 via eth1: lease 10.1.1.166 unavailable. >>>>> Feb 25 13:07:27 SRVDHCP dhcpd: DHCPNAK on 10.1.1.166 to >>> 00:40:ca:a8:cf:f5 >>>>> via eth1 >>>>> Feb 25 13:07:28 SRVDHCP dhcpd: DHCPOFFER on 10.1.1.165 to >>> 00:40:ca:a8:cf:f5 >>>>> via eth1 >>>>> root@SRVDHCP:/var/log# >>>>> >>>>> >>>>> >>>>> Em 25 de fevereiro de 2011 12:15, Daian Conrad <da...@op... >>>> escreveu: >>>>> >>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>> Hash: SHA1 >>>>>> >>>>>> todos os logs, em LSB, ficam em /var/log/(syslog,daemon.log,messages) >>>>>> >>>>>> []s >>>>>> >>>>>> >>>>>> Em 25-02-2011 12:07, Myke Lima escreveu: >>>>>>> desculpe a ignorancia, mas onde ficam os logs do tftp? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Em 25 de fevereiro de 2011 11:02, Daian Conrad <da...@op... >>>>>>> escreveu: >>>>>>> >>>>>>> Myke, >>>>>>> >>>>>>> Voce consegue verificar nos logs do tftp alguma informação quando a >>>>>>> maquina cliente inicia ??? >>>>>>> >>>>>>> Tem alguma informação que ainda esta faltando, ficar simplesmente >>> parado >>>>>>> no boot, não explica muita coisa . . . >>>>>>> >>>>>>> Look inside the logs dude ;-) >>>>>>> >>>>>>> >>>>>>> []s >>>>>>> >>>>>>> >>>>>>> Em 25-02-2011 09:51, Myke Lima escreveu: >>>>>>>>>> alguém mais tem idéia do que pode estar acontecendo??? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Em 24 de fevereiro de 2011 15:26, Myke Lima <cm...@gm...> >>>>>>> escreveu: >>>>>>>>>> >>>>>>>>>>> alterei recriei a imagem e mesma coisa >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Em 24 de fevereiro de 2011 15:23, Daian Conrad < >>> da...@op... >>>>>>>>>> escreveu: >>>>>>>>>>> >>>>>>>>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>>>>>>>> Hash: SHA1 >>>>>>>>>>>> >>>>>>>>>>>> pode ser sim, tem que estar igual >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Se esta diferente fui eu que errei :) >>>>>>>>>>>> >>>>>>>>>>>> []s >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Em 24-02-2011 14:41, Myke Lima escreveu: >>>>>>>>>>>>> fiz o procedimento mas esta do mesmo jeito fica parada no >>>>>>>>>>>> pinguinzinhu.... >>>>>>>>>>>>> >>>>>>>>>>>>> uma coisa q eu achei estranha e dei uma olhada no >>>>>>>>>>>> thinstation.conf.buildtime >>>>>>>>>>>>> >>>>>>>>>>>>> esta como sessao rdesktop e no build.conf esta seleciona o >>>>>> rdesktopsvn >>>>>>>>>>>>> >>>>>>>>>>>>> esta certo isso é a mesma coisa? >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Em 24 de fevereiro de 2011 13:00, Myke Lima <cm...@gm... >>>> >>>>>>>>>>>> escreveu: >>>>>>>>>>>>> >>>>>>>>>>>>>> ok, vou testar e posto aqui a principio eu não sei qual a >>> placa >>>>>> de >>>>>>> rede >>>>>>>>>>>> e >>>>>>>>>>>>>> video, mas no servidor antigo de ltsp estava tudo como vesa >>> por >>>>>> isso >>>>>>>>>>>> ate >>>>>>>>>>>>>> deixei o vesa habilitado mas o modelo do thinclient é esse >>>>>>>>>>>>>> http://www.connec.com.br/site/p01b1.asp >>>>>>>>>>>>>> >>>>>>>>>>>>>> <http://www.connec.com.br/site/p01b1.asp> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Em 24 de fevereiro de 2011 11:56, Daian Conrad < >>>>>> da...@op... >>>>>>>>>>>>> escreveu: >>>>>>>>>>>>>> >>>>>>>>>>>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>>>>>>>>>>> Hash: SHA1 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> è possivel que tenha algum problema na configuração da sua >>>>>> imagem de >>>>>>>>>>>>>>> boot(initrd), faltando algum modulo e coisas do tipo. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> os problemas com modulos são comuns em thinclient's muito >>> novos, >>>>>>> pois >>>>>>>>>>>>>>> ainda estão atualizando o core para versões de kernel mais >>> novos >>>>>> e >>>>>>>>>>>> etc. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Qual o modelo do thinclient ou maquina(rede e video) . . . >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Por via das duvidas dei uma revisada nos seus arquivos e acho >>>>>> que >>>>>>>>>>>> seria >>>>>>>>>>>>>>> interessante testar o RDP com o rdesktop. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Deixei a principio prontosó copiar para a pasta , renomear e >>>>>>>>>>>>>>> compilar(./build) . >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> []s >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Em 24-02-2011 11:39, Myke Lima escreveu: >>>>>>>>>>>>>>>> Ele fica parado na tela toda preta com a seguinte mensagem: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Loading vmlinuz...................... >>>>>>>>>>>>>>>> Loading initrd..........ready >>>>>>>>>>>>>>>> Uncompressing Linux... Ok, booting the kernel. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> e não sai disso... >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> sera que tem algo errado na minha imagem meu arquivo >>> build.conf >>>>>> ta >>>>>>>>>>>>>>> certo? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Em 24 de fevereiro de 2011 11:25, Daian Conrad < >>>>>> da...@op... >>>>>>>>>>>>>>>> escreveu: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Parece que ele não achou o kernel indicado (vmlinuz ou o >>>>>> initrd), >>>>>>> nos >>>>>>>>>>>>>>>> logs do tftp, não aparece o caminho ou arquivos que a >>> estação >>>>>> esta >>>>>>>>>>>>>>>> procurando ?? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> []s >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Em 24-02-2011 08:54, Myke Lima escreveu: >>>>>>>>>>>>>>>>>>> Bom dia, tenho alguma novidades.. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> consegui fazer o boot mas ainda to com um errinho fiz o >>>>>>> seguinte: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> criei um diretorio na raiz chamado /tftpboot >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> copiei todo conteudo de >>>>>>>>>>>>>>>> /var/lib/tftpboot/Thinstation-2.2.2f/boot-images/pxe >>>>>>>>>>>>>>>>>>> para dentro de /tftpboot >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> depois dei o seguinte comando chmod 777 /tftpboot >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> alterei o dhcpd.conf para seguintes configurações >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> option root-path "/tftpboot"; >>>>>>>>>>>>>>>>>>> filename "pxelinux.0"; >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> certo fui testar ele encontrou o arquivo e começou a dar >>> o >>>>>> boot >>>>>>>>>>>> mas >>>>>>>>>>>>>>> parou >>>>>>>>>>>>>>>> na >>>>>>>>>>>>>>>>>>> seguinte mensagem >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Could not find kernel image: diag/vesamenu.c32 >>>>>>>>>>>>>>>>>>> boot: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> essa mensagem fica aparecendo mais ou menos de uns 5 em 5 >>>>>>> segundos >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> eu olhei e esse arquivo existe na pasta >>>>>>>>>>>>>>>>>>> /tftpboot/pxelinux.cfg/diag/vesamenu.c32 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> será que eu teria que mover essa pasta diag para >>>>>> /tftpboot/diag >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> alguém tem idéia??? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2011/2/23 Daian Conrad <da...@op...> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> o arquivo que precisa ser pego pelo cliente PXE é o >>>>>> pxelinux.0, >>>>>>>>>>>> deve >>>>>>>>>>>>>>>>>>> colocar o caminho pra esse arquivo >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> []s >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Em 23-02-2011 17:23, Myke Lima escreveu: >>>>>>>>>>>>>>>>>>>>>> Em 23 de fevereiro de 2011 17:21, Myke Lima < >>>>>>> cm...@gm... >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> escreveu: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> correto entendi, meu arquivo pxelinux.0 esta no >>> seguinte >>>>>>>>>>>>>>> diretorio >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> /var/lib/tftpboot/Thinstation-2.2.2f/boot-images/pxe/pxelinux.0 >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> então minha config ficou: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> option root-path "/var/lib/tftpboot"; >>>>>>>>>>>>>>>>>>>>>>> filename >>>>>> "Thinstation-2.2.2f/boot-images/pxe/pxelinux.0"; >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> mas continua com o mesmo erro não encontra o arquivo >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> o que mais poderia estar errado? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2011/2/23 Daian Conrad <da...@op...> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Foi mal cara, não percebi a linha do PXE, tem um >>> caminho >>>>>>> errado >>>>>>>>>>>>>>> ali no >>>>>>>>>>>>>>>>>>>>>> dhcp mesmo. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> filename "boot-images/pxe/pxelinux.0"; >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> esse caminho é para o binario do PXE, voce deve >>> colocar o >>>>>>>>>>>> caminho >>>>>>>>>>>>>>> onde >>>>>>>>>>>>>>>>>>>>>> se encontra o seu, partindo do /var/lib/tftpboot. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> EX.: se o arquivo estiver em >>>>>>>>>>>>>>> /var/lib/tftpboot/pxelinuc.cfg/pxelinux.0 >>>>>>>>>>>>>>>> o >>>>>>>>>>>>>>>>>>>>>> caminho correto seria . . . >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> filename "pxelinux.cfg/pxelinux.0"; >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> []s >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Em 23-02-2011 17:07, Myke Lima escreveu: >>>>>>>>>>>>>>>>>>>>>>>>>> *se for o arquivo esse arquivo >>>>>> /etc/default/tftpd-hpa* >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> a conf dele ta do seguinte maneira: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> RUN_DAEMON= yes >>>>>>>>>>>>>>>>>>>>>>>>>> TFTP_USERNAME= tftp >>>>>>>>>>>>>>>>>>>>>>>>>> TFTP_DIRECTORY= /var/lib/tftpboot >>>>>>>>>>>>>>>>>>>>>>>>>> TFTP_ADDRESS= 10.1.1.3:69 >>>>>>>>>>>>>>>>>>>>>>>>>> TFTP_OPTION= secure >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> se não for esse arquivo qual seria? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> 2011/2/23 Daian Conrad <da...@op...> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> provavelmente as configurações do seu tftp devem >>>>>> estar >>>>>>>>>>>>>>> apontando >>>>>>>>>>>>>>>> para >>>>>>>>>>>>>>>>>>>>>>>>>> outro diretorio, jah conferiu isso ? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> []s >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Em 23-02-2011 16:34, Myke Lima escreveu: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> hum.. estranho fiz isso e não deu certo >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ele achou o servidor dhcp atribuiu ip achou o >>>>>> servidor >>>>>>>>>>>> tftp >>>>>>>>>>>>>>> mas >>>>>>>>>>>>>>>>>>> não >>>>>>>>>>>>>>>>>>>>>> achou >>>>>>>>>>>>>>>>>>>>>>>>>> o >>>>>>>>>>>>>>>>>>>>>>>>>>>>> arquivo >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> apareceu as seguintes mensagens: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> file not foun >>>>>>>>>>>>>>>>>>>>>>>>>>>>> tftp error - file not found >>>>>>>>>>>>>>>>>>>>>>>>>>>>> exiting bootmanage pxe rom >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> e agora? >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2011/2/23 Daian Conrad <da...@op...> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Só mude a linha abaixo para o diretório correto >>> . >>>>>> . . >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> option root-path "/tftpboot"; >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> para >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> option root-path "/var/lib/tftpboot"; >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> e reiniciar o serviço do dhcp3-server . . . >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> e testar é claro :) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> []s >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Em 23-02-2011 15:41, Myke Lima escreveu: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> option root-path "/tftpboot"; >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>> >>>>>> >>> ------------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>> Free Software Download: Index, Search & Analyze >>> Logs >>>>>> and >>>>>>>>>>>> other >>>>>>>>>>>>>>> IT >>>>>>>>>>>>>>>>>>> data >>>>>>>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>>>>>>>>>>> Real-Time with Splunk. Collect, index and harness >>> all >>>>>> the >>>>>>>>>>>> fast >>>>>>>>>>>>>>>> moving >>>>>>>>>>>>>>>>>>> IT >>>>>>>>>>>>>>>>>>>>>>>>>> data >>>>>>>>>>>>>>>>>>>>>>>>>> generated by your applications, servers and >>> devices >>>>>>> whether >>>>>>>>>>>>>>>> physical, >>>>>>>>>>>>>>>>>>>>>>>>>> virtual >>>>>>>>>>>>>>>>>>>>>>>>>> or in the cloud. Deliver compliance at lower cost >>> and >>>>>>> gain >>>>>>>>>>>> new >>>>>>>>>>>>>>>>>>> business >>>>>>>>>>>>>>>>>>>>>>>>>> insights. http://p.sf.net/sfu/splunk-dev2dev >>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>> >>>>>> >>> ------------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>> Free Software Download: Index, Search & Analyze Logs >>> and >>>>>>> other >>>>>>>>>>>> IT >>>>>>>>>>>>>>> data >>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>>>>>>> Real-Time with Splunk. Collect, index and harness all >>> the >>>>>>> fast >>>>>>>>>>>>>>> moving >>>>>>>>>>>>>>>> IT >>>>>>>>>>>>>>>>>>>>>> data >>>>>>>>>>>>>>>>>>>>>> generated by your applications, servers and devices >>>>>> whether >>>>>>>>>>>>>>> physical, >>>>>>>>>>>>>>>>>>>>>> virtual >>>>>>>>>>>>>>>>>>>>>> or in the cloud. Deliver compliance at lower cost and >>>>>> gain >>>>>>> new >>>>>>>>>>>>>>>> business >>>>>>>>>>>>>>>>>>>>>> insights. http://p.sf.net/sfu/splunk-dev2dev >>>>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>> >>>>>> >>> ------------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>> Free Software Download: Index, Search & Analyze Logs and >>>>>> other >>>>>>> IT >>>>>>>>>>>>>>> data in >>>>>>>>>>>>>>>>>>> Real-Time with Splunk. Collect, index and harness all the >>>>>> fast >>>>>>>>>>>> moving >>>>>>>>>>>>>>> IT >>>>>>>>>>>>>>>>>>> data >>>>>>>>>>>>>>>>>>> generated by your applications, servers and devices >>> whether >>>>>>>>>>>> physical, >>>>>>>>>>>>>>>>>>> virtual >>>>>>>>>>>>>>>>>>> or in the cloud. Deliver compliance at lower cost and >>> gain >>>>>> new >>>>>>>>>>>>>>> business >>>>>>>>>>>>>>>>>>> insights. http://p.sf.net/sfu/splunk-dev2dev >>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>> >>>>>> >>> ------------------------------------------------------------------------------ >>>>>>>>>>>>>>>> Free Software Download: Index, Search & Analyze Logs and >>> other >>>>>> IT >>>>>>>>>>>> data >>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>> Real-Time with Splunk. Collect, index and harness all the >>> fast >>>>>>> moving >>>>>>>>>>>> IT >>>>>>>>>>>>>>>> data >>>>>>>>>>>>>>>> generated by your applications, servers and devices whether >>>>>>> physical, >>>>>>>>>>>>>>>> virtual >>>>>>>>>>>>>>>> or in the cloud. Deliver compliance at lower cost and gain >>> new >>>>>>>>>>>> business >>>>>>>>>>>>>>>> insights. http://p.sf.net/sfu/splunk-dev2dev >>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>>> >>>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> - - >>>>>>>>>>>>>>> - >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>> >>>>>> >>> ------------------------------------------------------------------------------ >>>>>>>>>>>>>>> Free Software Download: Index, Search & Analyze Logs and >>> other >>>>>> IT >>>>>>> data >>>>>>>>>>>> in >>>>>>>>>>>>>>> Real-Time with Splunk. Collect, index and harness all the >>> fast >>>>>>> moving >>>>>>>>>>>> IT >>>>>>>>>>>>>>> data >>>>>>>>>>>>>>> generated by your applications, servers and devices whether >>>>>>> physical, >>>>>>>>>>>>>>> virtual >>>>>>>>>>>>>>> or in the cloud. Deliver compliance at lower cost and gain >>> new >>>>>>>>>>>> business >>>>>>>>>>>>>>> insights. http://p.sf.net/sfu/splunk-dev2dev >>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>> Thinstation-portuguese mailing list >>>>>>>>>>>>>>> Thi...@li... >>>>>>>>>>>>>>> >>>>>> https://lists.sourceforge.net/lists/listinfo/thinstation-portuguese >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> - -- >>>>>>>>>>>>>>> ======================= >>>>>>>>>>>>>>> *** Daian Conrad >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Linux user: #248912 >>>>>>>>>>>>>>> PGP/GPG: 0x7E25E948 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ** OpenS Team (DaCoD) >>>>>>>>>>>>>>> E-mail: da...@op... >>>>>>>>>>>>>>> Fone: +55 48 3954-8000 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>> >>>>>>>> >>>>>> >>>>>> - -- >>>>>> ======================= >>>>>> *** Daian Conrad >>>>>> >>>>>> Linux user: #248912 >>>>>> PGP/GPG: 0x7E25E948 >>>>>> >>>>>> ** OpenS Team (DaCoD) >>>>>> E-mail: da...@op... >>>>>> Fone: +55 48 3954-8000 >>>>>> >>>>>> -----BEGIN PGP SIGNATURE----- >>>>>> Version: GnuPG v1.4.10 (GNU/Linux) >>>>>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ >>>>>> >>>>>> iQEcBAEBAgAGBQJNZ8eTAAoJEKPh7Uh+JelIQacH/jLX7pVSLXe06gJamgmEN7Bp >>>>>> QKXaJJqBlkdnfJu+GuiNt+f/AL/Ihl8xtvaknk+Lxdx28ia8PPprQHaUyjUP61vK >>>>>> jmPTgFDH1UxlFKWEf6A0HnNI/RcqjbH77a17GGBzR5rbzIzEyxk7/YpMDyqZLdvo >>>>>> LVqej1gNbcaCIeDQoTSkgiVSzzqEG+lGU7V4SPd4jKteif5I5G2gAhjTHzI1iAcn >>>>>> Lg6mrrorf5gLjMOH7oUUzESGiQCg29NYCtwVy0GzPknM6xM7yaANFa+9OqZM4lVj >>>>>> VBiw5biL4u66ulocFooHsMb1GSZsz+uKpBQXXo6tKHoSeOAX70nQvzmhDR1Id8o= >>>>>> =9z8j >>>>>> -----END PGP SIGNATURE----- >>>>>> >>>>> >>>>> >>>> >>> >>> - -- >>> ======================= >>> *** Daian Conrad >>> >>> Linux user: #248912 >>> PGP/GPG: 0x7E25E948 >>> >>> ** OpenS Team (DaCoD) >>> E-mail: da...@op... >>> Fone: +55 48 3954-8000 >>> >>> -----BEGIN PGP SIGNATURE----- >>> Version: GnuPG v1.4.10 (GNU/Linux) >>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ >>> >>> iQEcBAEBAgAGBQJNaBuoAAoJEKPh7Uh+JelI42cIAJbTQpXt4RVzqsGj+9giybxd >>> Wobl8g7m0K7yB6VbFbqFC0+FOtdhIeR0P6URQt4rko0WXYSOhOpCZOzts1LICAlD >>> LZ/62mxXhlmpW9XzuMDpxQhDvCM4maGjERnSzUVMhrzG+90MxBzkdp3OisxXzht+ >>> Th+uI21zXtA9RJU30td9KXzBJP9hDMbNFetczKDoUCcg7fVBbtQnk9Vj2ObRQ+Wr >>> P8eaQGEc7I3OtUgoJq0XyL1bU9aJeX88VsFPePq+Phh8ugmJr1M70Eoew1Z19Cbb >>> lYWg6NZzGrzjtt/bkLI8qR4bggzLBKhsAsoF87Mu6Giu1Vpp1EgsTEYU/RKM+WI= >>> =k/DC >>> -----END PGP SIGNATURE----- >>> >> >> > - -- ======================= *** Daian Conrad Linux user: #248912 PGP/GPG: 0x7E25E948 ** OpenS Team (DaCoD) E-mail: da...@op... Fone: +55 48 3954-8000 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNa9HrAAoJEKPh7Uh+JelI4q4IAKypdR2qBEvxiSoV4BkO7W4i 1n1RjSLC9z0oBDK8NohRnAglOFHaLiLCwDS0sWNFLymqy4A49Wo2BDnMBXrW1lov W56duNuQQkHnqd0+DUyY89TzEvF0OBe18fXidWlV9Hnk5VxeOD6ws+07/lhFIh2s 1h5ZhDmQL9MthjIo27ytr+baxxH9xJ89jn1F21hXu7X19oTcdmvcwRI4FCe/s6iY H8AD1uRBXyKJ8GO89c5R0IiqJJgb6CTgZl2IbezYFZdkHvHqBycPAkiBjXlUT9+c w8ivagnnxe9qRJT4bd71G0CbuS6vyRg/m7gLRL5OxBNEEVuVIzwfGKhxKMW/yi0= =tyrW -----END PGP SIGNATURE----- |
From: Myke L. <cm...@gm...> - 2011-02-28 17:29:46
|
Sim ja tentei sem e com a opção -u mas não muda nada... fica do mesmo jeito.. Em 28 de fevereiro de 2011 13:48, Daian Conrad <da...@op...>escreveu: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Tentou remover a opção -u ?? > > []s > > Em 28-02-2011 11:36, Myke Lima escreveu: > > bom dia pessoal, > > estou ainda apanhando aqui, meu thinstation.conf.buildtime esta da > seguinte > > forma: > > > > > > KEYBOARD_MAP=pt_br > > DAILY_REBOOT=On > > RECONNECT_PROMPT=ON > > SCREEN=0 > > WORKSPACE=1 > > AUTOSTART=On > > ICONMODE=AUTO > > SESSION_0_TYPE=freerdp > > SESSION_0_AUTOSTART=ON > > SESSION_0_SCREEN=1 > > SESSION_0_FREERDP_SERVER=10.10.1.20 > > SESSION_0_FREERDP_OPTIONS="-u ' ' -a 15 -d meudominio" > > SCREEN_RESOLUTION="1024x768" > > SCREEN_COLOR_DEPTH="15" > > > > > > o que esta acontecendo é o seguinte, ele carrega o ts do 2008 mas sempre > > tenho que digitar meudominio\ antes do nome do usuario pois ele carrega > > direto nomedamaquina\root ja cai direto pra digitar a senha, alguem sabe > > como alterar isso? quero apenas ter q digitar o usuario e senha. > > > > > > > > > > > > > > > > > |