Re: [Thinstation-general] When I run xpdf or xcalc I get "fatal io error 11 (resource temporarily u

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Thanks for the answer.

I connect from thinstation to new terminal server and everythings work. 
On suse 11.2 i have problem, but on RHEL 6.2 works ok. I would use RHEL 
6.2.

Thread to close.

W dniu 2012-03-31 09:42, Mike Eriksen pisze:
> On Tue, Mar 27, 2012 at 11:19 AM, Marek Ramotowski
> <mar...@co...>  wrote:
>> I am sorry for my bad English.
>>
>> 1.  ###########
>> Problem: I can work on my Linux terminal server over Thinstation 5 and X
>> session (SESSION_0_TYPE=x). But, when I run xpdf or xcalc I get "fatal
>> io error 11 (resource temporarily unavailable)" and restart session. (On
>> thinstation 2.2 everything is OK)
> Yes as you don't have a window manager. Make SESSION_0 icewm or openbox.
>
> Mike
>
>
>
>> I need run: "xpdf 2>&1 | tee log.log" to see bellow text, because
>> session immediately restart.
>> cat log.log:
>> XIO: fatal IO error 11 (Zasoby chwilowo niedostępne) on X server
>> "10.194.102.91:0.0"
>>        after 236 requests (236 known processed) with 12 events remaining.
>>
>> This problem is on all different terminal which I have.
>>
>> Someone can help me?
>>
>> 2. ###########
>> bellow:
>>     * thinstation.conf
>>     * x.config-0
>>     * xorg.log
>>     * messages
>>     * build.conf
>> 2.1 ###########
>> Thinstation config load over tftp
>>> TIME_ZONE="UTC+2:00"
>>> SYSLOG_SERVER=local
>>> USB_ENABLED=On
>>> DAILY_REBOOT=On
>>> CUSTOM_CONFIG=Off
>>> RECONNECT_PROMPT=On
>>>
>>> SCREEN=0
>>> WORKSPACE=1
>>> AUTOSTART=On
>>>
>>> X_NUMLOCK=On
>>> X_MOUSE_PROTOCOL=IMPS/2
>>> X_MOUSE_DEVICE=/dev/input/mice
>>> MOUSE_RESOLUTION=100
>>>
>>> NET_HOSTNAME=ts_*
>>> NET_REMOTE_ACCESS_FROM="10.194.0.0"
>>> SCREEN_RESOLUTION="1024x768 | 800x600 | 640x480 | *"
>>> SCREEN_COLOR_DEPTH="16"
>>> SCREEN_HORIZSYNC="30-70 | *"
>>> SCREEN_VERTREFRESH="75"
>>> SESSION_0_TITLE="Linux"
>>> SESSION_0_TYPE=x
>>> SESSION_0_SCREEN=0
>>> SESSION_0_X_SERVER=poz3.bp
>>> SESSION_0_X_OPTIONS="-query"
>>>
>>> SCREEN_X_FONT_SERVER=poz3.bp:7100
>>   2.2 ###########
>> x.config-0:
>>> Section "ServerLayout"
>>>          Identifier     "X.org Configured"
>>>          Screen      0  "Screen0" 0 0
>>>          Screen      1  "Screen1" RightOf "Screen0"
>>>          InputDevice    "Mouse0" "CorePointer"
>>>          InputDevice    "Keyboard0" "CoreKeyboard"
>>> EndSection
>>> Section "Files"
>>>          ModulePath   "/usr/lib/xorg/modules"
>>>          FontPath     "/lib/fonts/X11/misc/"
>>>          FontPath     "/lib/fonts/X11/TTF/"
>>>          FontPath     "/lib/fonts/X11/OTF/"
>>>          FontPath     "/lib/fonts/X11/Type1/"
>>>          FontPath     "/lib/fonts/X11/100dpi/"
>>>          FontPath     "/lib/fonts/X11/75dpi/"
>>> EndSection
>>> Section "InputDevice"
>>>          Identifier  "Keyboard0"
>>>          Driver      "kbd"
>>> EndSection
>>> Section "InputDevice"
>>>          Identifier  "Mouse0"
>>>          Option  "Resolution" "100"
>>>          Driver      "mouse"
>>>          Option      "Protocol" "auto"
>>>          Option      "Device" "/dev/input/mice"
>>>          Option      "ZAxisMapping" "4 5 6 7"
>>> EndSection
>>> Section "Monitor"
>>>          HorizSync 30-70
>>>          VertRefresh 75
>>>          Identifier   "Monitor0"
>>>          VendorName   "Monitor Vendor"
>>>          ModelName    "Monitor Model"
>>> EndSection
>>> Section "Monitor"
>>>          HorizSync 30-70
>>>          VertRefresh 75
>>>          Identifier   "Monitor1"
>>>          VendorName   "Monitor Vendor"
>>>          ModelName    "Monitor Model"
>>> EndSection
>>> Section "Device"
>>>          ### Available Driver options are:-
>>>          ### Values:<i>: integer,<f>: float,<bool>: "True"/"False",
>>>          ###<string>: "String",<freq>: "<f>  Hz/kHz/MHz",
>>>          ###<percent>: "<f>%"
>>>          ### [arg]: arg optional
>>>          #Option     "SWcursor"                  # [<bool>]
>>>          #Option     "HWcursor"                  # [<bool>]
>>>          #Option     "NoAccel"                   # [<bool>]
>>>          #Option     "ShadowFB"                  # [<bool>]
>>>          #Option     "UseFBDev"                  # [<bool>]
>>>          #Option     "Rotate"                    # [<str>]
>>>          #Option     "VideoKey"                  #<i>
>>>          #Option     "FlatPanel"                 # [<bool>]
>>>          #Option     "FPDither"                  # [<bool>]
>>>          #Option     "CrtcNumber"                #<i>
>>>          #Option     "FPScale"                   # [<bool>]
>>>          #Option     "FPTweak"                   #<i>
>>>          #Option     "DualHead"                  # [<bool>]
>>>          Identifier  "Card0"
>>>          Driver      "nv"
>>>          BusID       "PCI:1:0:0"
>>> EndSection
>>> Section "Device"
>>>          ### Available Driver options are:-
>>>          ### Values:<i>: integer,<f>: float,<bool>: "True"/"False",
>>>          ###<string>: "String",<freq>: "<f>  Hz/kHz/MHz",
>>>          ###<percent>: "<f>%"
>>>          ### [arg]: arg optional
>>>          #Option     "ShadowFB"                  # [<bool>]
>>>          #Option     "DefaultRefresh"            # [<bool>]
>>>          #Option     "ModeSetClearScreen"        # [<bool>]
>>>          Identifier  "Card1"
>>>          Driver      "vesa"
>>>          BusID       "PCI:1:0:0"
>>> EndSection
>>> Section "Screen"
>>>          Identifier "Screen0"
>>>          Device     "Card0"
>>>          Monitor    "Monitor0"
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     1
>>>          EndSubSection
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     4
>>>          EndSubSection
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     8
>>>          EndSubSection
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     15
>>>          EndSubSection
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     16
>>>          EndSubSection
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     24
>>>          EndSubSection
>>> EndSection
>>> Section "Screen"
>>>          Identifier "Screen1"
>>>          Device     "Card1"
>>>          Monitor    "Monitor1"
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     1
>>>          EndSubSection
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     4
>>>          EndSubSection
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     8
>>>          EndSubSection
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     15
>>>          EndSubSection
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     16
>>>          EndSubSection
>>>          SubSection "Display"
>>>                  Viewport   0 0
>>>                  Modes "1024x768"
>>>                  Depth     24
>>>          EndSubSection
>>> EndSection
>>> Section "Dri"
>>>          Mode    0660
>>> EndSection
>> 2.3 ###########
>> Xorg.0.log
>>> [     7.626] _XSERVTransSocketOpenCOTSServer: Unable to open socket
>>> for inet6
>>> [     7.626] _XSERVTransOpen: transport open failed for inet6/test1:0
>>> [     7.626] _XSERVTransMakeAllCOTSServerListeners: failed to open
>>> listener for inet6
>>> [     7.631] XDMCP warning: INET6 UDP socket creation failed
>>> [     7.633]
>>> X.Org X Server 1.11.1
>>> Release Date: 2011-09-24
>>> [     7.633] X Protocol Version 11, Revision 0
>>> [     7.633] Build Operating System: ThinStation 2.5 Thinstation
>>> [     7.633] Current Operating System: Linux test1 3.2.5TS #1 PREEMPT
>>> Thu Feb 9 03:52:13 UTC 2012 i686
>>> [     7.633] Kernel command line: initrd=initrd video=uvesafb:off
>>> splash=off LM=3 BOOT_IMAGE=vmlinuz
>>> [     7.633] Build Date: 29 November 2011  10:08:54PM
>>> [     7.633] Donald A. Cupp Jr.
>>> [     7.634] Current version of pixman: 0.24.0
>>> [     7.634]     Before reporting problems, check
>>> http://www.thinstation.org
>>>      to make sure that you have the latest version.
>>> [     7.634] Markers: (--) probed, (**) from config file, (==) default
>>> setting,
>>>      (++) from command line, (!!) notice, (II) informational,
>>>      (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>> [     7.634] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan  4
>>> 17:42:09 1980
>>> [     7.634] (++) Using config file: "/etc/X11/x.config-0"
>>> [     7.634] (==) Using config directory: "/etc/X11/xorg.conf.d"
>>> [     7.636] (==) ServerLayout "X.org Configured"
>>> [     7.636] (**) |-->Screen "Screen0" (0)
>>> [     7.636] (**) |   |-->Monitor "Monitor0"
>>> [     7.636] (**) |   |-->Device "Card0"
>>> [     7.636] (**) |-->Screen "Screen1" (1)
>>> [     7.636] (**) |   |-->Monitor "Monitor1"
>>> [     7.637] (**) |   |-->Device "Card1"
>>> [     7.637] (**) |-->Input Device "Mouse0"
>>> [     7.637] (**) |-->Input Device "Keyboard0"
>>> [     7.637] (**) Option "IgnoreABI" "true"
>>> [     7.637] (**) Option "AutoAddDevices" "true"
>>> [     7.637] (**) Option "AutoEnableDevices" "true"
>>> [     7.637] (**) Ignoring ABI Version
>>> [     7.637] (**) Automatically adding devices
>>> [     7.637] (**) Automatically enabling devices
>>> [     7.637] (++) FontPath set to:
>>>      tcp/poz3.bp:7100
>>> [     7.637] (**) ModulePath set to "/usr/lib/xorg/modules"
>>> [     7.637] (WW) Hotplugging is on, devices using drivers 'kbd',
>>> 'mouse' or 'vmmouse' will be disabled.
>>> [     7.637] (WW) Disabling Mouse0
>>> [     7.637] (WW) Disabling Keyboard0
>>> [     7.637] (II) Loader magic: 0x81efea0
>>> [     7.638] (II) Module ABI versions:
>>> [     7.638]     X.Org ANSI C Emulation: 0.4
>>> [     7.638]     X.Org Video Driver: 11.0
>>> [     7.638]     X.Org XInput driver : 13.0
>>> [     7.638]     X.Org Server Extension : 6.0
>>> [     7.639] (--) PCI:*(0:1:0:0) 10de:0028:0e11:001f rev 21, Mem @
>>> 0x41000000/16777216, 0x44000000/33554432, BIOS @ 0x????????/65536
>>> [     7.639] (II) Open ACPI successful (/var/run/acpid.socket)
>>> [     7.639] (II) LoadModule: "extmod"
>>> [     7.641] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
>>> [     7.641] (II) Module extmod: vendor="X.Org Foundation"
>>> [     7.641]     compiled for 1.11.1, module version = 1.0.0
>>> [     7.641]     Module class: X.Org Server Extension
>>> [     7.641]     ABI class: X.Org Server Extension, version 6.0
>>> [     7.641] (II) Loading extension MIT-SCREEN-SAVER
>>> [     7.641] (II) Loading extension XFree86-VidModeExtension
>>> [     7.641] (II) Loading extension XFree86-DGA
>>> [     7.641] (II) Loading extension DPMS
>>> [     7.641] (II) Loading extension XVideo
>>> [     7.641] (II) Loading extension XVideo-MotionCompensation
>>> [     7.642] (II) Loading extension X-Resource
>>> [     7.642] (II) LoadModule: "dbe"
>>> [     7.642] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
>>> [     7.642] (II) Module dbe: vendor="X.Org Foundation"
>>> [     7.643]     compiled for 1.11.1, module version = 1.0.0
>>> [     7.643]     Module class: X.Org Server Extension
>>> [     7.643]     ABI class: X.Org Server Extension, version 6.0
>>> [     7.643] (II) Loading extension DOUBLE-BUFFER
>>> [     7.643] (II) LoadModule: "glx"
>>> [     7.643] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>>> [     7.644] (II) Module glx: vendor="X.Org Foundation"
>>> [     7.644]     compiled for 1.11.1, module version = 1.0.0
>>> [     7.644]     ABI class: X.Org Server Extension, version 6.0
>>> [     7.644] (==) AIGLX enabled
>>> [     7.644] (II) Loading extension GLX
>>> [     7.644] (II) LoadModule: "record"
>>> [     7.645] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
>>> [     7.645] (II) Module record: vendor="X.Org Foundation"
>>> [     7.645]     compiled for 1.11.1, module version = 1.13.0
>>> [     7.645]     Module class: X.Org Server Extension
>>> [     7.645]     ABI class: X.Org Server Extension, version 6.0
>>> [     7.645] (II) Loading extension RECORD
>>> [     7.645] (II) LoadModule: "dri"
>>> [     7.646] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
>>> [     7.646] (II) Module dri: vendor="X.Org Foundation"
>>> [     7.646]     compiled for 1.11.1, module version = 1.0.0
>>> [     7.646]     ABI class: X.Org Server Extension, version 6.0
>>> [     7.646] (II) Loading extension XFree86-DRI
>>> [     7.646] (II) LoadModule: "dri2"
>>> [     7.647] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
>>> [     7.647] (II) Module dri2: vendor="X.Org Foundation"
>>> [     7.647]     compiled for 1.11.1, module version = 1.2.0
>>> [     7.647]     ABI class: X.Org Server Extension, version 6.0
>>> [     7.647] (II) Loading extension DRI2
>>> [     7.647] (II) LoadModule: "nv"
>>> [     7.648] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
>>> [     7.648] (II) Module nv: vendor="X.Org Foundation"
>>> [     7.648]     compiled for 1.11.1, module version = 2.1.18
>>> [     7.648]     Module class: X.Org Video Driver
>>> [     7.648]     ABI class: X.Org Video Driver, version 11.0
>>> [     7.648] (II) LoadModule: "vesa"
>>> [     7.649] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
>>> [     7.649] (II) Module vesa: vendor="X.Org Foundation"
>>> [     7.649]     compiled for 1.11.1, module version = 2.3.0
>>> [     7.649]     Module class: X.Org Video Driver
>>> [     7.649]     ABI class: X.Org Video Driver, version 11.0
>>> [     7.649] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT,
>>> RIVA TNT2,
>>>      Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
>>>      Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
>>>      GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
>>>      GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
>>>      Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
>>>      GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
>>>      GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
>>>      GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
>>>      GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
>>>      GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
>>>      GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
>>>      Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
>>>      GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
>>>      GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
>>>      GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
>>>      Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
>>>      GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
>>>      Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
>>>      GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
>>>      GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
>>>      GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
>>>      GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
>>>      GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
>>>      GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
>>>      Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
>>>      GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
>>>      GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
>>>      GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
>>>      GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
>>>      GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
>>>      Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
>>>      GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
>>>      GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
>>>      GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
>>>      GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
>>>      Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
>>>      GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
>>>      GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
>>>      GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
>>>      Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
>>>      GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
>>>      GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
>>>      GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
>>>      GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
>>>      GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
>>>      GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
>>>      GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
>>>      GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
>>>      GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
>>>      Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
>>>      GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
>>>      GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
>>>      GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
>>>      GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
>>>      GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
>>>      GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
>>>      GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
>>>      Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
>>>      GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
>>>      Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
>>>      GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
>>>      GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
>>>      GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
>>>      GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
>>>      GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
>>>      Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
>>>      GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
>>>      GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
>>>      GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
>>>      Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
>>>      GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
>>>      GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
>>>      GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
>>>      Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
>>>      Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
>>>      GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
>>>      Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
>>>      Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
>>>      GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
>>>      GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
>>>      GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
>>>      GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
>>>      GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
>>>      GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
>>>      GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
>>>      Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
>>>      Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
>>>      GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
>>>      GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
>>>      GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
>>>      GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
>>>      GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
>>>      GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
>>>      GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
>>>      GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
>>>      GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
>>>      Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
>>>      Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
>>>      GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
>>>      GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
>>>      Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
>>>      Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
>>>      Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
>>>      GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
>>>      nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
>>>      GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
>>>      GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
>>>      GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
>>>      GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
>>>      GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
>>>      ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
>>>      GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
>>>      GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
>>>      GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
>>>      GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
>>>      NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
>>>      GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
>>>      Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
>>>      GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
>>>      GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
>>>      GeForce GTS 360M, Quadro FX 1800M
>>> [     7.656] (II) VESA: driver for VESA chipsets: vesa
>>> [     7.656] (++) using VT number 1
>>>
>>> [     7.657] (--) NV: Found NVIDIA RIVA TNT2 at 01@00:00:0
>>> [     7.658] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
>>> [     7.658] (WW) Falling back to old probe method for vesa
>>> [     7.658] (II) Loading sub module "int10"
>>> [     7.658] (II) LoadModule: "int10"
>>> [     7.658] (II) Loading /usr/lib/xorg/modules/libint10.so
>>> [     7.659] (II) Module int10: vendor="X.Org Foundation"
>>> [     7.659]     compiled for 1.11.1, module version = 1.0.0
>>> [     7.659]     ABI class: X.Org Video Driver, version 11.0
>>> [     7.659] (II) NV(0): Initializing int10
>>> [     7.660] (II) NV(0): Primary V_BIOS segment is: 0xc000
>>> [     7.661] (--) NV(0): Chipset: "RIVA TNT2"
>>> [     7.661] (++) NV(0): Depth 16, (--) framebuffer bpp 16
>>> [     7.661] (==) NV(0): RGB weight 565
>>> [     7.661] (==) NV(0): Default visual is TrueColor
>>> [     7.661] (II) Loading sub module "vgahw"
>>> [     7.661] (II) LoadModule: "vgahw"
>>> [     7.661] (II) Loading /usr/lib/xorg/modules/libvgahw.so
>>> [     7.662] (II) Module vgahw: vendor="X.Org Foundation"
>>> [     7.662]     compiled for 1.11.1, module version = 0.1.0
>>> [     7.662]     ABI class: X.Org Video Driver, version 11.0
>>> [     7.662] (==) NV(0): Using HW cursor
>>> [     7.662] (--) NV(0): Linear framebuffer at 0x44000000
>>> [     7.662] (--) NV(0): MMIO registers at 0x41000000
>>> [     7.667] (II) Loading sub module "i2c"
>>> [     7.668] (II) LoadModule: "i2c"
>>> [     7.668] (II) Module "i2c" already built-in
>>> [     7.668] (II) Loading sub module "ddc"
>>> [     7.668] (II) LoadModule: "ddc"
>>> [     7.668] (II) Module "ddc" already built-in
>>> [     7.668] (II) NV(0): I2C bus "DDC" initialized.
>>> [     7.668] (II) NV(0): Probing for EDID on I2C bus A...
>>> [     7.668] (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
>>> [     7.718] (--) NV(0): DDC detected a CRT:
>>> [     7.718] (II) NV(0): Manufacturer: MAX  Model: 778  Serial#: 13800254
>>> [     7.718] (II) NV(0): Year: 2004  Week: 53
>>> [     7.719] (II) NV(0): EDID Version: 1.3
>>> [     7.719] (II) NV(0): Analog Display Input,  Input Voltage Level:
>>> 0.700/0.300 V
>>> [     7.719] (II) NV(0): Sync:  Separate
>>> [     7.719] (II) NV(0): Max Image Size [cm]: horiz.: 37  vert.: 30
>>> [     7.719] (II) NV(0): Gamma: 2.20
>>> [     7.719] (II) NV(0): DPMS capabilities: StandBy Suspend Off;
>>> RGB/Color Display
>>> [     7.719] (II) NV(0): First detailed timing is preferred mode
>>> [     7.719] (II) NV(0): redX: 0.640 redY: 0.330   greenX: 0.300
>>> greenY: 0.600
>>> [     7.719] (II) NV(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313
>>> whiteY: 0.329
>>> [     7.719] (II) NV(0): Supported established timings:
>>> [     7.719] (II) NV(0): 720x400@70Hz
>>> [     7.719] (II) NV(0): 640x480@60Hz
>>> [     7.719] (II) NV(0): 640x480@75Hz
>>> [     7.719] (II) NV(0): 800x600@56Hz
>>> [     7.719] (II) NV(0): 800x600@60Hz
>>> [     7.719] (II) NV(0): 800x600@72Hz
>>> [     7.719] (II) NV(0): 800x600@75Hz
>>> [     7.719] (II) NV(0): 832x624@75Hz
>>> [     7.719] (II) NV(0): 1024x768@60Hz
>>> [     7.719] (II) NV(0): 1024x768@70Hz
>>> [     7.719] (II) NV(0): 1024x768@75Hz
>>> [     7.719] (II) NV(0): 1280x1024@75Hz
>>> [     7.719] (II) NV(0): 1152x864@75Hz
>>> [     7.719] (II) NV(0): Manufacturer's mask: 0
>>> [     7.719] (II) NV(0): Supported standard timings:
>>> [     7.719] (II) NV(0): #0: hsize: 1280  vsize 1024  refresh: 60
>>> vid: 32897
>>> [     7.719] (II) NV(0): Supported detailed timing:
>>> [     7.719] (II) NV(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
>>> [     7.719] (II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1440
>>> h_blank_end 1688 h_border: 0
>>> [     7.719] (II) NV(0): v_active: 1024  v_sync: 1025  v_sync_end 1028
>>> v_blanking: 1066 v_border: 0
>>> [     7.719] (II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H
>>> max: 83 kHz,
>>> [     7.719] (II) NV(0): Monitor name: Belinea
>>> [     7.719] (II) NV(0): Monitor name: 101920
>>> [     7.719] (II) NV(0): EDID (in hex):
>>> [     7.720] (II) NV(0):     00ffffffffffff00343878073e93d200
>>> [     7.720] (II) NV(0):     350e010308251e78eaee95a3544c9926
>>> [     7.720] (II) NV(0):     0f5054a7ef8081800101010101010101
>>> [     7.720] (II) NV(0):     010101010101302a009851002a403070
>>> [     7.720] (II) NV(0):     1300782d1100001e000000fd00384b1f
>>> [     7.720] (II) NV(0):     53ff000a202020202020000000fc0042
>>> [     7.720] (II) NV(0):     656c696e6561200a20202020000000fc
>>> [     7.720] (II) NV(0):     003130313932300a20202020202000ef
>>> [     7.720] (II) NV(0): Using CRT on CRTC 0
>>> [     7.720] (II) NV(0): EDID vendor "MAX", prod id 1912
>>> [     7.720] (II) NV(0): Using hsync ranges from config file
>>> [     7.720] (II) NV(0): Using vrefresh ranges from config file
>>> [     7.720] (II) NV(0): Printing DDC gathered Modelines:
>>> [     7.720] (II) NV(0): Modeline "1280x1024"x0.0  108.00  1280 1328
>>> 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>>> [     7.720] (II) NV(0): Modeline "800x600"x0.0   40.00  800 840 968
>>> 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>>> [     7.720] (II) NV(0): Modeline "800x600"x0.0   36.00  800 824 896
>>> 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>>> [     7.720] (II) NV(0): Modeline "640x480"x0.0   31.50  640 656 720
>>> 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>>> [     7.720] (II) NV(0): Modeline "640x480"x0.0   25.18  640 656 752
>>> 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>>> [     7.720] (II) NV(0): Modeline "720x400"x0.0   28.32  720 738 846
>>> 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>>> [     7.720] (II) NV(0): Modeline "1280x1024"x0.0  135.00  1280 1296
>>> 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>>> [     7.720] (II) NV(0): Modeline "1024x768"x0.0   78.75  1024 1040
>>> 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>>> [     7.720] (II) NV(0): Modeline "1024x768"x0.0   75.00  1024 1048
>>> 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>>> [     7.720] (II) NV(0): Modeline "1024x768"x0.0   65.00  1024 1048
>>> 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>>> [     7.721] (II) NV(0): Modeline "832x624"x0.0   57.28  832 864 928
>>> 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>>> [     7.721] (II) NV(0): Modeline "800x600"x0.0   49.50  800 816 896
>>> 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>>> [     7.721] (II) NV(0): Modeline "800x600"x0.0   50.00  800 856 976
>>> 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>>> [     7.721] (II) NV(0): Modeline "1152x864"x0.0  108.00  1152 1216
>>> 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>>> [     7.721] (--) NV(0): VideoRAM: 16384 kBytes
>>> [     7.721] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
>>> [     7.721] (II) NV(0): Monitor0: Using hsync range of 30.00-70.00 kHz
>>> [     7.721] (II) NV(0): Monitor0: Using vrefresh value of 75.00 Hz
>>> [     7.721] (II) NV(0): Clock range:  12.00 to 350.00 MHz
>>> [     7.721] (II) NV(0): Not using default mode "640x350" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "320x175" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "640x400" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "320x200" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "720x400" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "360x200" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "640x480" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "320x240" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "640x480" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "320x240" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "640x480" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "320x240" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "800x600" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "400x300" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "800x600" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "400x300" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "800x600" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "400x300" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "800x600" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "400x300" (vrefresh
>>> out of range)
>>> [     7.721] (II) NV(0): Not using default mode "1024x768i" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "512x384i" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "1024x768" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "512x384" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "1024x768" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "512x384" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "1024x768" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "512x384" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "1280x960" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "640x480" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "1280x960" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "640x480" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1280x1024" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "640x512" (vrefresh
>>> out of range)
>>> [     7.722] (II) NV(0): Not using default mode "1280x1024" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "640x512" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1280x1024" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "640x512" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1600x1200" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "800x600" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1600x1200" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "800x600" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1600x1200" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "800x600" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1600x1200" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "800x600" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1600x1200" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "800x600" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1792x1344" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "896x672" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1792x1344" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "896x672" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1856x1392" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "928x696" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "1856x1392" (hsync out
>>> of range)
>>> [     7.722] (II) NV(0): Not using default mode "928x696" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "1920x1440" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "960x720" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "1920x1440" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "960x720" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "1400x1050" (vrefresh
>>> out of range)
>>> [     7.723] (II) NV(0): Not using default mode "700x525" (vrefresh
>>> out of range)
>>> [     7.723] (II) NV(0): Not using default mode "1400x1050" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "700x525" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "1920x1440" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "960x720" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "2048x1536" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "1024x768" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "2048x1536" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "1024x768" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using default mode "2048x1536" (bad mode
>>> clock/interlace/doublescan)
>>> [     7.723] (II) NV(0): Not using default mode "1024x768" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using driver mode "1280x1024" (vrefresh
>>> out of range)
>>> [     7.723] (II) NV(0): Not using driver mode "800x600" (vrefresh out
>>> of range)
>>> [     7.723] (II) NV(0): Not using driver mode "800x600" (vrefresh out
>>> of range)
>>> [     7.723] (II) NV(0): Not using driver mode "640x480" (vrefresh out
>>> of range)
>>> [     7.723] (II) NV(0): Not using driver mode "720x400" (vrefresh out
>>> of range)
>>> [     7.723] (II) NV(0): Not using driver mode "1280x1024" (hsync out
>>> of range)
>>> [     7.723] (II) NV(0): Not using driver mode "1024x768" (vrefresh
>>> out of range)
>>> [     7.723] (II) NV(0): Not using driver mode "1024x768" (vrefresh
>>> out of range)
>>> [     7.723] (II) NV(0): Not using driver mode "800x600" (vrefresh out
>>> of range)
>>> [     7.723] (II) NV(0): Not using driver mode "1152x864" (width too
>>> large for virtual size)
>>> [     7.723] (II) NV(0): Not using default mode "1152x864" (width too
>>> large for virtual size)
>>> [     7.723] (--) NV(0): Virtual size is 1024x768 (pitch 1024)
>>> [     7.723] (**) NV(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz,
>>> 75.0 Hz
>>> [     7.723] (II) NV(0): Modeline "1024x768"x75.0   78.75  1024 1040
>>> 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>>> [     7.723] (**) NV(0):  Default mode "1024x768": 78.8 MHz, 60.0 kHz,
>>> 75.0 Hz
>>> [     7.724] (II) NV(0): Modeline "1024x768"x75.0   78.75  1024 1040
>>> 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>>> [     7.724] (**) NV(0):  Driver mode "832x624": 57.3 MHz, 49.7 kHz,
>>> 74.6 Hz
>>> [     7.724] (II) NV(0): Modeline "832x624"x74.6   57.28  832 864 928
>>> 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>>> [     7.724] (**) NV(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz,
>>> 74.6 Hz
>>> [     7.724] (II) NV(0): Modeline "832x624"x74.6   57.28  832 864 928
>>> 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>>> [     7.724] (**) NV(0):  Driver mode "800x600": 49.5 MHz, 46.9 kHz,
>>> 75.0 Hz
>>> [     7.724] (II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896
>>> 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>>> [     7.724] (**) NV(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz,
>>> 75.0 Hz
>>> [     7.724] (II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896
>>> 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>>> [     7.724] (**) NV(0):  Driver mode "640x480": 31.5 MHz, 37.5 kHz,
>>> 75.0 Hz
>>> [     7.724] (II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720
>>> 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>>> [     7.724] (**) NV(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz,
>>> 75.0 Hz
>>> [     7.724] (II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720
>>> 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>>> [     7.724] (**) NV(0):  Default mode "576x432": 54.0 MHz, 67.5 kHz,
>>> 75.0 Hz (D)
>>> [     7.724] (II) NV(0): Modeline "576x432"x75.0   54.00  576 608 672
>>> 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz)
>>> [     7.724] (**) NV(0):  Default mode "512x384": 39.4 MHz, 60.0 kHz,
>>> 75.0 Hz (D)
>>> [     7.724] (II) NV(0): Modeline "512x384"x75.0   39.38  512 520 568
>>> 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
>>> [     7.724] (**) NV(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz,
>>> 74.7 Hz (D)
>>> [     7.724] (II) NV(0): Modeline "416x312"x74.7   28.64  416 432 464
>>> 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
>>> [     7.724] (**) NV(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz,
>>> 75.1 Hz (D)
>>> [     7.724] (II) NV(0): Modeline "400x300"x75.1   24.75  400 408 448
>>> 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
>>> [     7.724] (**) NV(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz,
>>> 75.0 Hz (D)
>>> [     7.724] (II) NV(0): Modeline "320x240"x75.0   15.75  320 328 360
>>> 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz)
>>> [     7.725] (**) NV(0): Display dimensions: (370, 300) mm
>>> [     7.725] (**) NV(0): DPI set to (70, 65)
>>> [     7.725] (II) Loading sub module "fb"
>>> [     7.725] (II) LoadModule: "fb"
>>> [     7.725] (II) Loading /usr/lib/xorg/modules/libfb.so
>>> [     7.726] (II) Module fb: vendor="X.Org Foundation"
>>> [     7.726]     compiled for 1.11.1, module version = 1.0.0
>>> [     7.726]     ABI class: X.Org ANSI C Emulation, version 0.4
>>> [     7.726] (II) Loading sub module "xaa"
>>> [     7.727] (II) LoadModule: "xaa"
>>> [     7.727] (II) Loading /usr/lib/xorg/modules/libxaa.so
>>> [     7.729] (II) Module xaa: vendor="X.Org Foundation"
>>> [     7.729]     compiled for 1.11.1, module version = 1.2.1
>>> [     7.729]     ABI class: X.Org Video Driver, version 11.0
>>> [     7.729] (II) Loading sub module "ramdac"
>>> [     7.729] (II) LoadModule: "ramdac"
>>> [     7.729] (II) Module "ramdac" already built-in
>>> [     7.730] (II) UnloadModule: "vesa"
>>> [     7.730] (II) Unloading vesa
>>> [     7.840] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
>>> [     7.840]     Screen to screen bit blits
>>> [     7.840]     Solid filled rectangles
>>> [     7.840]     8x8 mono pattern filled rectangles
>>> [     7.840]     Indirect CPU to Screen color expansion
>>> [     7.840]     Solid Lines
>>> [     7.840]     Scanline Image Writes
>>> [     7.840]     Setting up tile and stipple cache:
>>> [     7.840]         32 128x128 slots
>>> [     7.840]         32 256x256 slots
>>> [     7.840]         16 512x512 slots
>>> [     7.840] (==) NV(0): Backing store disabled
>>> [     7.840] (==) NV(0): Silken mouse enabled
>>> [     7.841] (==) NV(0): DPMS enabled
>>> [     7.842] (==) RandR enabled
>>> [     7.842] (II) Initializing built-in extension Generic Event Extension
>>> [     7.842] (II) Initializing built-in extension SHAPE
>>> [     7.842] (II) Initializing built-in extension MIT-SHM
>>> [     7.842] (II) Initializing built-in extension XInputExtension
>>> [     7.842] (II) Initializing built-in extension XTEST
>>> [     7.842] (II) Initializing built-in extension BIG-REQUESTS
>>> [     7.842] (II) Initializing built-in extension SYNC
>>> [     7.842] (II) Initializing built-in extension XKEYBOARD
>>> [     7.842] (II) Initializing built-in extension XC-MISC
>>> [     7.842] (II) Initializing built-in extension SECURITY
>>> [     7.842] (II) Initializing built-in extension XINERAMA
>>> [     7.842] (II) Initializing built-in extension XFIXES
>>> [     7.842] (II) Initializing built-in extension XFree86-Bigfont
>>> [     7.842] (II) Initializing built-in extension RENDER
>>> [     7.842] (II) Initializing built-in extension RANDR
>>> [     7.842] (II) Initializing built-in extension COMPOSITE
>>> [     7.842] (II) Initializing built-in extension DAMAGE
>>> [     7.880] (II) AIGLX: Screen 0 is not DRI2 capable
>>> [     7.880] (II) AIGLX: Screen 0 is not DRI capable
>>> [     7.898] (II) AIGLX: Loaded and initialized swrast
>>> [     7.898] (II) GLX: Initialized DRISWRAST GL provider for screen 0
>>> [     9.136] (II) config/udev: Adding input device Power Button
>>> (/dev/input/event1)
>>> [     9.136] (**) Power Button: Applying InputClass "Keyboard Defaults"
>>> [     9.136] (**) Power Button: Applying InputClass "evdev keyboard
>>> catchall"
>>> [     9.136] (II) LoadModule: "evdev"
>>> [     9.137] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>>> [     9.137] (II) Module evdev: vendor="X.Org Foundation"
>>> [     9.137]     compiled for 1.11.1, module version = 2.6.0
>>> [     9.137]     Module class: X.Org XInput Driver
>>> [     9.137]     ABI class: X.Org XInput driver, version 13.0
>>> [     9.137] (II) Using input driver 'evdev' for 'Power Button'
>>> [     9.137] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>>> [     9.137] (**) Power Button: always reports core events
>>> [     9.137] (**) Power Button: Device: "/dev/input/event1"
>>> [     9.138] (--) Power Button: Found keys
>>> [     9.138] (II) Power Button: Configuring as keyboard
>>> [     9.138] (**) Option "config_info"
>>> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
>>> [     9.138] (II) XINPUT: Adding extended input device "Power Button"
>>> (type: KEYBOARD, id 6)
>>> [     9.138] (**) Option "xkb_rules" "evdev"
>>> [     9.138] (**) Option "xkb_model" "evdev"
>>> [     9.138] (**) Option "xkb_layout" "pl"
>>> [     9.258] (II) config/udev: Adding input device Power Button
>>> (/dev/input/event0)
>>> [     9.258] (**) Power Button: Applying InputClass "Keyboard Defaults"
>>> [     9.258] (**) Power Button: Applying InputClass "evdev keyboard
>>> catchall"
>>> [     9.258] (II) Using input driver 'evdev' for 'Power Button'
>>> [     9.258] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>>> [     9.259] (**) Power Button: always reports core events
>>> [     9.259] (**) Power Button: Device: "/dev/input/event0"
>>> [     9.259] (--) Power Button: Found keys
>>> [     9.259] (II) Power Button: Configuring as keyboard
>>> [     9.259] (**) Option "config_info"
>>> "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
>>> [     9.259] (II) XINPUT: Adding extended input device "Power Button"
>>> (type: KEYBOARD, id 7)
>>> [     9.259] (**) Option "xkb_rules" "evdev"
>>> [     9.259] (**) Option "xkb_model" "evdev"
>>> [     9.259] (**) Option "xkb_layout" "pl"
>>> [     9.261] (II) config/udev: Adding input device Logitech USB-PS/2
>>> Optical Mouse (/dev/input/event2)
>>> [     9.261] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass
>>> "evdev pointer catchall"
>>> [     9.261] (II) Using input driver 'evdev' for 'Logitech USB-PS/2
>>> Optical Mouse'
>>> [     9.261] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>>> [     9.261] (**) Logitech USB-PS/2 Optical Mouse: always reports core
>>> events
>>> [     9.261] (**) Logitech USB-PS/2 Optical Mouse: Device:
>>> "/dev/input/event2"
>>> [     9.262] (--) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
>>> [     9.262] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
>>> [     9.262] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
>>> [     9.262] (--) Logitech USB-PS/2 Optical Mouse: Found x and y
>>> relative axes
>>> [     9.262] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
>>> [     9.262] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel
>>> support
>>> [     9.262] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping:
>>> buttons 4 and 5
>>> [     9.262] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton:
>>> 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>>> [     9.262] (**) Option "config_info"
>>> "udev:/sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1/1-1:1.0/input/input2/event2"
>>> [     9.262] (II) XINPUT: Adding extended input device "Logitech
>>> USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
>>> [     9.262] (II) Logitech USB-PS/2 Optical Mouse: initialized for
>>> relative axes.
>>> [     9.262] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping
>>> acceleration scheme 1
>>> [     9.262] (**) Logitech USB-PS/2 Optical Mouse: (accel)
>>> acceleration profile 0
>>> [     9.263] (**) Logitech USB-PS/2 Optical Mouse: (accel)
>>> acceleration factor: 2.000
>>> [     9.263] (**) Logitech USB-PS/2 Optical Mouse: (accel)
>>> acceleration threshold: 4
>>> [     9.264] (II) config/udev: Adding input device Logitech USB-PS/2
>>> Optical Mouse (/dev/input/mouse0)
>>> [     9.264] (II) No input driver/identifier specified (ignoring)
>>> [     9.265] (II) config/udev: Adding input device BTC USB Multimedia
>>> Keyboard (/dev/input/event3)
>>> [     9.265] (**) BTC USB Multimedia Keyboard: Applying InputClass
>>> "Keyboard Defaults"
>>> [     9.265] (**) BTC USB Multimedia Keyboard: Applying InputClass
>>> "evdev keyboard catchall"
>>> [     9.265] (II) Using input driver 'evdev' for 'BTC USB Multimedia
>>> Keyboard'
>>> [     9.265] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>>> [     9.265] (**) BTC USB Multimedia Keyboard: always reports core events
>>> [     9.265] (**) BTC USB Multimedia Keyboard: Device: "/dev/input/event3"
>>> [     9.265] (--) BTC USB Multimedia Keyboard: Found keys
>>> [     9.265] (II) BTC USB Multimedia Keyboard: Configuring as keyboard
>>> [     9.265] (**) Option "config_info"
>>> "udev:/sys/devices/pci0000:00/0000:00:1f.4/usb1/1-2/1-2:1.0/input/input3/event3"
>>> [     9.265] (II) XINPUT: Adding extended input device "BTC USB
>>> Multimedia Keyboard" (type: KEYBOARD, id 9)
>>> [     9.265] (**) Option "xkb_rules" "evdev"
>>> [     9.266] (**) Option "xkb_model" "evdev"
>>> [     9.266] (**) Option "xkb_layout" "pl"
>>> [     9.268] (II) config/udev: Adding input device BTC USB Multimedia
>>> Keyboard (/dev/input/event4)
>>> [     9.268] (**) BTC USB Multimedia Keyboard: Applying InputClass
>>> "Keyboard Defaults"
>>> [     9.268] (**) BTC USB Multimedia Keyboard: Applying InputClass
>>> "evdev keyboard catchall"
>>> [     9.268] (II) Using input driver 'evdev' for 'BTC USB Multimedia
>>> Keyboard'
>>> [     9.268] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>>> [     9.268] (**) BTC USB Multimedia Keyboard: always reports core events
>>> [     9.268] (**) BTC USB Multimedia Keyboard: Device: "/dev/input/event4"
>>> [     9.268] (--) BTC USB Multimedia Keyboard: Found keys
>>> [     9.268] (II) BTC USB Multimedia Keyboard: Configuring as keyboard
>>> [     9.268] (**) Option "config_info"
>>> "udev:/sys/devices/pci0000:00/0000:00:1f.4/usb1/1-2/1-2:1.1/input/input4/event4"
>>> [     9.268] (II) XINPUT: Adding extended input device "BTC USB
>>> Multimedia Keyboard" (type: KEYBOARD, id 10)
>>> [     9.268] (**) Option "xkb_rules" "evdev"
>>> [     9.268] (**) Option "xkb_model" "evdev"
>>> [     9.268] (**) Option "xkb_layout" "pl"
>>> [    91.679]
>>> Backtrace:
>>> [    91.679] 0: Xorg (xorg_backtrace+0x3b) [0x81bc63b]
>>> [    91.680] 1: Xorg (0x8048000+0x1780e5) [0x81c00e5]
>>> [    91.680] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb774d40c]
>>> [    91.680] 3: Xorg (ProcessWorkQueue+0x30) [0x8079570]
>>> [    91.680] 4: Xorg (WaitForSomething+0x6e) [0x81b97ce]
>>> [    91.680] 5: Xorg (0x8048000+0x2cb6e) [0x8074b6e]
>>> [    91.680] 6: Xorg (0x8048000+0x1afba) [0x8062fba]
>>> [    91.680] 7: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb72e9de6]
>>> [    91.680] 8: Xorg (0x8048000+0x1ab91) [0x8062b91]
>>> [    91.680] Segmentation fault at address (nil)
>>> [    91.681]
>>> Fatal server error:
>>> [    91.681] Caught signal 11 (Segmentation fault). Server aborting
>>> [    91.681]
>>> [    91.681]
>>> Please consult the ThinStation made by Don Cupp support
>>>       at http://www.thinstation.org
>>>   for help.
>>> [    91.681] Please also check the log file at "/var/log/Xorg.0.log"
>>> for additional information.
>>> [    91.681]
>>> [    91.681] (II) Power Button: Close
>>> [    91.681] (II) UnloadModule: "evdev"
>>> [    91.681] (II) Unloading evdev
>>> [    91.681] (II) Power Button: Close
>>> [    91.682] (II) UnloadModule: "evdev"
>>> [    91.682] (II) Unloading evdev
>>> [    91.683] (II) Logitech USB-PS/2 Optical Mouse: Close
>>> [    91.683] (II) UnloadModule: "evdev"
>>> [    91.683] (II) Unloading evdev
>>> [    91.683] (II) BTC USB Multimedia Keyboard: Close
>>> [    91.684] (II) UnloadModule: "evdev"
>>> [    91.684] (II) Unloading evdev
>>> [    91.684] (II) BTC USB Multimedia Keyboard: Close
>>> [    91.684] (II) UnloadModule: "evdev"
>>> [    91.684] (II) Unloading evdev
>>> [    92.696] Server terminated with error (1). Closing log file.
>> 2.4 ###########
>> tail messages
>>> Jan  4 17:42:29 test1 authpriv.warn dropbear[1201]: lastlog_openseek:
>>> /var/log/lastlog is not a file or directory!
>>> Jan  4 19:43:34 test1 daemon.info init: process '-/bin/start-session
>>> 0' (pid 857) exited. Scheduling for restart.
>>> Jan  4 19:43:34 test1 daemon.info init: starting pid 1212, tty
>>> '/dev/tty1': '-/bin/start-session 0'
>>> Jan  4 17:43:34 test1 daemon.notice acpid: client 870[0:0] has
>>> disconnected
>>> Jan  4 17:43:34 test1 daemon.notice acpid: client connected from 1224[0:0]
>>> Jan  4 17:43:34 test1 daemon.info acpid: 1 client rule loaded
>>> Jan  4 17:44:30 test1 authpriv.info dropbear[1250]: Child connection
>>> from 10.194.255.18:44615
>>> Jan  4 17:44:34 test1 authpriv.notice dropbear[1250]: Password auth
>>> succeeded for 'root' from 10.194.255.18:44615
>>> Jan  4 17:44:34 test1 authpriv.info dropbear[1250]: Exit (root):
>>> Exited normally
>>> Jan  4 17:45:14 test1 authpriv.info dropbear[1252]: Child connection
>>> from 10.194.255.18:44640
>>> Jan  4 17:45:18 test1 authpriv.notice dropbear[1252]: Password auth
>>> succeeded for 'root' from 10.194.255.18:44640
>>> Jan  4 17:47:28 test1 authpriv.info dropbear[1252]: Exit (root):
>>> Exited normally
>>> Jan  4 19:48:33 test1 daemon.info init: process '-/bin/start-session
>>> 0' (pid 1212) exited. Scheduling for restart.
>>> Jan  4 19:48:33 test1 daemon.info init: starting pid 1315, tty
>>> '/dev/tty1': '-/bin/start-session 0'
>>> Jan  4 17:48:34 test1 daemon.notice acpid: client 1224[0:0] has
>>> disconnected
>>> Jan  4 17:48:34 test1 daemon.notice acpid: client connected from 1327[0:0]
>>> Jan  4 17:48:34 test1 daemon.info acpid: 1 client rule loaded
>> 2.5 ###########
>> build.conf
>>> machine   classic_generic
>>> module   vfat
>>> module   squashfs
>>> module   psmouse
>>> module   hid
>>> module   usbhid
>>> module   ohci-hcd
>>> module   vhci-hcd
>>> module   ehci-hcd
>>> module   xhci-hcd
>>> module   uhci-hcd
>>> module   video
>>> module   agpgart
>>> module   intel-gtt
>>> module   button
>>> module   i2c-algo-bit
>>> module   intel-agp
>>> module   drm
>>> module   drm_kms_helper
>>> module   i915
>>> package   xorg7-mach64
>>> package   xorg7-vesa
>>> package   xorg7-ati
>>> package   xorg7-nv
>>> package   xorg7-intel
>>> package   locale-pl_PL
>>> package   rdesktop
>>> package   xnest
>>> package   sshd
>>> param   acpisupport   enable
>>> param   modesetfb   enable
>>> param   splash   verbose
>>> param   splash   silent
>>> param   fbmtrr   0
>>> param   fbsm   ywrap
>>> param   bootresolution   1024x768-32
>>> param   defaultconfig   thinstation.conf.buil
>>> param   basename   thinstation
>>> param   haltonerror   false
>>> param   initrdcmd   "gzip   -9"
>>> param   bootverbosity   24
>>
>>
>>
>>
>>
>>
>>
>> --
>> tel: (+48-61)871 20 49,http://www.comp-win.pl
>> Comp-Win Sp. z o.o., ul. Leszka 44, 61-062 Poznań
>> KRS: 1435, Sąd Rejonowy Poznań - Nowe Miasto i Wilda w Poznaniu,
>> VIII Wydział Gospodarczy KRS; Kapitał zakładowy: 450000zł
>> NIP: 782-22-03-649, REGON: 634166729
>>
>> Treść powyższej wiadomości i dołączone do niej pliki są przeznaczone
>> dla konkretnego Adresata i mogą zawierać informacje podlegające
>> ochronie. Jeśli w efekcie pomyłki wiadomość ta trafi do rąk Osoby
>> trzeciej, prosimy poinformować o błędzie Nadawcę i usunąć maila.
>> Rozpowszechnianie, kopiowanie, rozprowadzanie lub wykorzystywanie
>> informacji zawartych w mailu jest działaniem prawnie zabronionym.
>>
>> This e-mail and any files transmitted with it are confidential and
>> intended solely for the use of the individual to whom it is
>> addressed. If you are not the intended recipient of the e-mail you
>> should not copy, modify, distribute or take any action in
>> reliance on it. If you have received this mail in error please notify
>> the sender and delete this e-mail from your system.
>> Unauthorized publication, use, dissemination, forwarding, printing or
>> copying of this e-mail and its attachments is strictly prohibited.
>>
>>
>> ------------------------------------------------------------------------------
>> This SF email is sponsosred by:
>> Try Windows Azure free for 90 days Click Here
>> http://p.sf.net/sfu/sfd2d-msazure
>> _______________________________________________
>> Thinstation-general mailing list
>> Thi...@li...
>> https://lists.sourceforge.net/lists/listinfo/thinstation-general
>
>

-- 
tel: (+48-61)871 20 49, http://www.comp-win.pl
Comp-Win Sp. z o.o., ul. Leszka 44, 61-062 Poznań
KRS: 1435, Sąd Rejonowy Poznań - Nowe Miasto i Wilda w Poznaniu,
VIII Wydział Gospodarczy KRS; Kapitał zakładowy: 450000zł
NIP: 782-22-03-649, REGON: 634166729

Treść powyższej wiadomości i dołączone do niej pliki są przeznaczone
dla konkretnego Adresata i mogą zawierać informacje podlegające
ochronie. Jeśli w efekcie pomyłki wiadomość ta trafi do rąk Osoby
trzeciej, prosimy poinformować o błędzie Nadawcę i usunąć maila.
Rozpowszechnianie, kopiowanie, rozprowadzanie lub wykorzystywanie
informacji zawartych w mailu jest działaniem prawnie zabronionym.

This e-mail and any files transmitted with it are confidential and
intended solely for the use of the individual to whom it is
addressed. If you are not the intended recipient of the e-mail you
should not copy, modify, distribute or take any action in
reliance on it. If you have received this mail in error please notify
the sender and delete this e-mail from your system.
Unauthorized publication, use, dissemination, forwarding, printing or
copying of this e-mail and its attachments is strictly prohibited.

Re: [Thinstation-general] When I run xpdf or xcalc I get "fatal io error 11 (resource temporarily u

Re: [Thinstation-general] When I run xpdf or xcalc I get "fatal io error 11 (resource temporarily unavailable)" and restart session.