syre src

Updates:
- GUI_Syre:
- improvements in syrmDesign and FEAfix (under development):
- added design options
- additional information available in the figure
- bug fixed
- added the possibility to change flux carrier thickness (new coefficient: Rotor yoke factor)
- added utilities tab in the main GUI
- added the possibility to simulate custom currents waveform (loaded from a separate file)
- added straight ribs for circular geometry
- V-type geometry: to be dismissed in future releases. Consider to use Seg geometry with barriers shrink factor = 0
- added axis convention (SR or PM)
- GUI_Syre_MMM:
- minor bug fixed in efficiency map computation
- updated operating limits computation: now phase resistance is considered

Main GUI updates:
- 2D structural analysis (with Matlab PDE Toolbox)
- peak short-circuit current evaluation (HWC condition, see ECCE2021 paper)
- added radial geometrical scaling to main GUI
- added the possibility to load a custom geometry from the FEMM file (after dxf import in FEMM)
- improved the possibility to easily select the number of quadrants for flux maps evaluation
- Motor-CAD interface improved
- added the export to Ansys-Maxwell (still work-in-progress)

MMM GUI updates:
- transient short-circuit computation (see ECCE2021 paper)
- updated the field names in motorModel structure
- added the possibility to change the dq-axis convention (from SyR to PM motor and vice versa)
- added end-winding length (to avoid AC Joule loss model overestimation)

Other updates:
- new PM-SyRM model (THOR), with MMM data (see ECCE2021, WEMDCD2021 or ECCE2019 papers)
- added the MMM data to mot_01 and RAWP motors
- updated the user manual (merge between main GUI and MMM) and updated reference list

Some bug fixed

- improvement of syreDrive, presented at WEMDCD 2021 conference
- general re-order of folder, with the possibility to add custom functions (in the syreCustomFunction folder)
- minor bug fixed
- improvement in Seg barriers parametrization
- improvement in Motor-CAD export
- added MMM data for mot_01 and RAWP motors
- possibility to manage custom material library

Major changes:
- airgap force computation
- improvement of preliminary design of SyR machines
- improved FEAfix process
- improvement of characteristic current computation
- improvement of the V-type rotor geometric check
- added slot model and skin effect computation
- added iron loss computation using SyR-e processing and FEMM results
- update GUI with AppDesigner
- added direct export to Motor-CAD
- improvement of the multi-three-phase motors simulation and processing
- update material library
- improved demagnetization curve computation
- added demagnetization analysis, to estimate the quantity of PMs demagnetized for a given current
- creation of a second GUI for the magnetic model elaboration and post-processing (GUI_Syre_MMM)
- improved Seg geometry, with straight ribs
- added motor mass and rotor inertia estimation
- added computation of the short-circuit torque (MMM)
- removed xfemm link

Major revision:
- better organization of folder and subfoler in mfiles
- improved syrmDesign for SyR, SPM and single layer V-type IPM machines
- extended FEAfix approach to SPM and V-type
- added FEAfix8
- parallel computing for FEAfix and multiple point simulations (only if parallel pool is enabled)
- Improved PM definition for Circular, Seg, ISeg, SPM and V-type geometries
- Improved V-type geometry with a different parametrization and multiple layers
- Improved post-processing tab: now it is possible to select the analysis method with a menu
- added demagnetization analysis and demagnetization curve computation in post-processing tab
- added characteristic current evaluation in post-processing tab
- added evaluation of airgap, stator yoke and tooth flux density in post-processing tab
- added current offset simulation in post-processing tab
- new airgap boundary condition, according to FEMM 28Feb2018 release
- added dqtMap post-processing
- improved material library working
- added PM design procedure, according to a target characteristic current
- Added PM dimensions and PM shape factor in the optimization variables list
- updated user manual and list of references

Fix the bugs in rev28: files were missing

Update prior to Boot Camp 2018
- export to Magnet/Infolytica improved
- FEAfix and FBS included

Major revision:
- Added multi-3-phase machines
- Added Vtype IPM rotors
- Improved the PMs sizing for Seg and ISeg geometries
- Improved Octave compatibility
- GUI updated
- Post-processing functions improved
- Improved the analytical SyRM design tool
- Added FEAfix procedure for SyRM design
- Added Flux Barrier Shift for Circular and Seg geometries
- Added references
- Improved the management of the material library

Commit for ECCE 2017 tutorial.

- edded IEMDC2017 model
- bug fixed