#20 [174f:6a31] Rev.99 Error message during init (0x201 = 0C)

[Xavier Hourcade]

Description
Webcam works almost(*) flawlessly, however an error message is printed during webcan init sequence at boot

Webcam
174f:6a31 (Asus V1S AS004E)

Kernel (OS)
2.6.35.10-74.fc14.x86_64 (Fedora 14 amd64)

Source
svn co -r 99 https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver/trunk/driver

Error
stk11xx: Check device return error (0x0201 = 0C) !

Reproducible
Always

Workaround
Ignore it ? ^^

Additional info
Complete boot sequence
# dmesg
[ 6695.284811] Linux video capture interface: v2.00
[ 6695.294104] stk11xx: Syntek USB2.0 webcam driver startup
[ 6695.294107] stk11xx: Copyright(c) 2006-2009 Nicolas VIVIEN
[ 6695.294135] stk11xx: Syntek USB2.0 - STK-1135 based webcam found.
[ 6695.294137] stk11xx: Syntek AVStream USB2.0 1.3M WebCam - Product ID 0x6A31.
[ 6695.294140] stk11xx: Release: 0005
[ 6695.294142] stk11xx: Number of interfaces : 1
[ 6695.294759] stk11xx: Initialize USB2.0 Syntek Camera
[ 6695.402091] stk11xx: Check device return error (0x0201 = 0C) !
[ 6695.477962] stk11xx: Syntek USB2.0 Camera is ready
[ 6695.479181] stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0
[ 6695.479264] usbcore: registered new interface driver usb_stk11xx_driver
[ 6695.479270] stk11xx: v2.2.0 : Syntek USB Video Camera

I can provide additional info if needed.
Xavier

(*) notes: distinct bug reports