Recently purchased this Omron's 3S4YR-HNFR1-002 black card reader from ebay ( supposed to read all 3 tracks). This has a serial port D (female) connector cable from the reader . I used ss1.6AlphaWindowsInstaller in Windows XP m/c. I used the
"ss -2 -P 0x3F9" command in the command line.
I'm getting Port!, Waiting for card... but no response for my swipes with different credit card that I have :-(.
I tried other track numers 1 and 3 too and also tried with 0x3f8, the port address :-(
The complete specification of the card is in the following link:http://www.coronaprint.com/datasheet/HNFR_e.pdf
I have other problems in compiling the source files seperately in Visual C++ 6.0. It gives an error "RC : fatal error RC1110 : could not open D:\Documents and Settings\pals\Desktop\snoop\Script1.rc. If I create a dummy file, then it says Parser.cpp not found. If I copy it from version 1.5, then it gives 25 more errors. Not sure where I'm going wrong.
I also tried it using as a hyber terminal with 9600, 8N1, none. That also does not excite the reader though...
Appreciate your help very much in resolving my state.
Thanks in advance,
Pals.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
In the Screen Shots page (http://stripesnoop.sourceforge.net/screenshots.html), it mentions that Version 2.0 s/w supports serial based readers. Does any one of you know as where to download the V2.0, to experiment with my reader ?.
"Version 2.0 Preview - This is a preview of the upcoming Stripe Snoop 2.0 release. The database is now multi-track aware, and Stripe Snoop support Magtek and other serial based readers. Here, Stripe Snoop is using a Serial based reader. It reads all the tracks, auto-detects the different character sets, and performs a look up in the database"
Eagerly await your reply...
Pals.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Dear members:
Recently purchased this Omron's 3S4YR-HNFR1-002 black card reader from ebay ( supposed to read all 3 tracks). This has a serial port D (female) connector cable from the reader . I used ss1.6AlphaWindowsInstaller in Windows XP m/c. I used the
"ss -2 -P 0x3F9" command in the command line.
I'm getting Port!, Waiting for card... but no response for my swipes with different credit card that I have :-(.
I tried other track numers 1 and 3 too and also tried with 0x3f8, the port address :-(
The complete specification of the card is in the following link:http://www.coronaprint.com/datasheet/HNFR_e.pdf
I have other problems in compiling the source files seperately in Visual C++ 6.0. It gives an error "RC : fatal error RC1110 : could not open D:\Documents and Settings\pals\Desktop\snoop\Script1.rc. If I create a dummy file, then it says Parser.cpp not found. If I copy it from version 1.5, then it gives 25 more errors. Not sure where I'm going wrong.
I also tried it using as a hyber terminal with 9600, 8N1, none. That also does not excite the reader though...
Appreciate your help very much in resolving my state.
Thanks in advance,
Pals.
Hello,
In the Screen Shots page (http://stripesnoop.sourceforge.net/screenshots.html), it mentions that Version 2.0 s/w supports serial based readers. Does any one of you know as where to download the V2.0, to experiment with my reader ?.
"Version 2.0 Preview - This is a preview of the upcoming Stripe Snoop 2.0 release. The database is now multi-track aware, and Stripe Snoop support Magtek and other serial based readers. Here, Stripe Snoop is using a Serial based reader. It reads all the tracks, auto-detects the different character sets, and performs a look up in the database"
Eagerly await your reply...
Pals.
Please do not post your question in multiple forums. Most people monitor both forums so they will see it regardless of which forum you use.
I have responded to your questions on your thread in the Help forum:
https://sourceforge.net/forum/forum.php?thread_id=2482114&forum_id=387203