Hi,

I dunno where you got your fstab, but you still have some inconsistencies.  /dev/pts /dev/shm /proc don't really have backing devices, so their backing devices should be none.

Do a `dumpe2fs -h` on your loopback and on /dev/sda1.  Try disabling some ext3 features for e2fsck 1.35.  Also how did you make the filesystem on this VBD?

Keep in mind we haven't tested OpenSSI on FC4, so you're really experimenting here.  I assume this e2fsck you are running in domU is from FC3, so it is meant to compliment mke2fs from FC3 - not FC4.  It shouldn't be a big problem anyway.

Roger


On 11/20/05, Dave <master@bradleyland.com> wrote:
Roger Tsang <roger.tsang <at> gmail.com> writes:

>
>
> You shouldn't have to include the absolute path /dev/1/sda1 in fstab.
Just /dev/sda1 will be fine.
> The other fstab entries should have node=*
> Roger
>

Thanks for the assistance Roger. I changed the fstab to /dev/sda1, but the
result is the same. The original "sda" device (which is actually a file-backed
VBD for the domU) was created on FC4 using e2fsck ver. 1.38. Could this be the
problem? When I "fsck" it on FC4 it checks fine.

Here's the complete boot log followed by the fstab ---

Linux version 2.6.10 (root@teegeeack.bradleyland.com) (gcc version 3.2.3
20030502 (Red Hat Linux 3.2.3-47.fc4)) #1 Sun Nov 6 23:15:56 PST 2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000008000000 (usable)
128MB LOWMEM available.
DMI not present.
IRQ lockup detection disabled
Built 1 zonelists
Kernel command line:  root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Xen reported: 548.319 MHz processor.
Using tsc for high-res timesource
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 123488k/131072k available (2439k kernel code, 7420k reserved, 1479k
data, 120k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1446k freed
NET: Registered protocol family 16
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 20000K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as tty
Event-channel device installed.
xen_blk: Initialising virtual block device driver
elevator: using anticipatory as default io scheduler
xen_net: Initialising virtual ethernet driver.
register_blkdev: cannot get major 8 for sd
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 120k freed
initrd-tools: 0.1.74.ssi6
mount: fs type devfs not supported by kernel
FATAL: Module sd_mod not found.
Waiting for 5 seconds, press ENTER to obtain a shell.
umount: devfs: not mounted
Gathering cluster info
Configuring eth0: 192.168.2.30/255.255.255.0
Configuring cluster
Running pre-root cluster initialization

This is a CI/OpenSSI kernel.
    This Cluster Node: 1
    Potential Initnode(s): 1:192.168.2.30

Name server registered with clms
ipcnameserver ready completed
ipcname_read completed
warning: can't open /proc/mounts: No such file or directory
mount: fs type devfs not supported by kernel
ReiserFS: sda1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs
on sda1
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
umount: devfs: not mounted
warning: can't open /proc/mounts: No such file or directory
Attempting to pivot_root
Running post-root cluster initialization
warning: can't open /proc/mounts: No such file or directory
Unmounting /sys
Unmounting /proc
Starting init
INIT: version 2.86-SSI booting
/etc/rcS.d/S02mountvirtfs: line 40: /dev/null: Read-only file system
warning: can't open /proc/mounts: No such file or directory
/etc/rcS.d/S02mountvirtfs: line 162: /dev/null: Read-only file system
Mounting a tmpfs over /dev...done.
Creating initial device nodes...done.
nm_add_node: Node 2 added
Activating swap.
Checking root file system...
fsck 1.35 (28-Feb-2004)
fsck.ext3: Filesystem has unsupported feature(s) (/dev/sda1)
e2fsck: Get a newer version of e2fsck!

fsck failed.  Please repair manually and reboot.  Please note
that the root file system is currently mounted read-only.  To
remount it read-write:

   # mount -n -o remount,rw /

CONTROL-D will exit from this shell and REBOOT the system.

Give root password for maintenance
(or type Control-D to continue):
(none):~#

(none):/etc# cat fstab
# UNCONFIGURED FSTAB FOR BASE SYSTEM
/dev/sda1       /       ext3    defaults,node=1 0       1
/dev/devpts     /dev/pts        devpts  node=*,gid=5,mode=620 0 0
/dev/shm        /dev/shm        tmpfs   defaults,node=* 0 0
/dev/proc       /proc           proc    defaults,node=* 0 0
/dev/sys        /sys            sysfs   defaults,node=* 0 0

(none):/etc#





-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.  Get Certified Today
Register for a JBoss Training Course.  Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click
_______________________________________________
Ssic-linux-users mailing list
Ssic-linux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ssic-linux-users