Re: [Ssh-sftp-perl-users] Device does not support shell requestnotpreceded by pty request

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

I try command with success.
Maybe it is important but as you see in my debug the switch ask to press=20
enter when login in to access cli :

[root@srv78supervision ~]# ssh -vvv -l operator 10.1.2.22
OpenSSH_4.3p2, OpenSSL 0.9.8a 11 Oct 2005
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 10.1.2.22 [10.1.2.22] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type -1
debug3: Not a RSA1 key file /root/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /root/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_3.7.=
1p2
debug1: match: OpenSSH_3.7.1p2 pat OpenSSH_3.*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.3
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:=20
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hel=
lman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:=20
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfou=
r,aes192-cbc,aes256-cbc,r
debug2: kex_parse_kexinit:=20
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfou=
r,aes192-cbc,aes256-cbc,r
debug2: kex_parse_kexinit:=20
hmac-md5,hmac-sha1,hmac-ripemd160,hma...@op...,hmac-sha1-96=
,hmac-md5-96
debug2: kex_parse_kexinit:=20
hmac-md5,hmac-sha1,hmac-ripemd160,hma...@op...,hmac-sha1-96=
,hmac-md5-96
debug2: kex_parse_kexinit: none,zl...@op...,zlib
debug2: kex_parse_kexinit: none,zl...@op...,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:=20
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa
debug2: kex_parse_kexinit: des,3des-cbc
debug2: kex_parse_kexinit: des,3des-cbc
debug2: kex_parse_kexinit:=20
hmac-md5,hmac-sha1,hmac-ripemd160,hma...@op...,hmac-sha1-96=
,hmac-md5-96
debug2: kex_parse_kexinit:=20
hmac-md5,hmac-sha1,hmac-ripemd160,hma...@op...,hmac-sha1-96=
,hmac-md5-96
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client 3des-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server 3des-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<2048<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 189/384
debug2: bits set: 1578/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts2
debug3: check_host_in_hostfile: match line 1
debug1: Host '10.1.2.22' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts2:1
debug2: bits set: 1588/3191
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/identity ((nil))
debug2: key: /root/.ssh/id_rsa ((nil))
debug2: key: /root/.ssh/id_dsa ((nil))
debug3: input_userauth_banner
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/identity
debug3: no such identity: /root/.ssh/identity
debug1: Trying private key: /root/.ssh/id_rsa
debug3: no such identity: /root/.ssh/id_rsa
debug1: Trying private key: /root/.ssh/id_dsa
debug1: read PEM private key done: type DSA
debug3: sign_and_send_pubkey
debug2: we sent a publickey packet, wait for reply
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 0
debug3: tty_make_modes: ospeed 38400
debug3: tty_make_modes: ispeed 38400
debug3: tty_make_modes: 1 3
debug3: tty_make_modes: 2 28
debug3: tty_make_modes: 3 127
debug3: tty_make_modes: 4 21
debug3: tty_make_modes: 5 4
debug3: tty_make_modes: 6 0
debug3: tty_make_modes: 7 0
debug3: tty_make_modes: 8 17
debug3: tty_make_modes: 9 19
debug3: tty_make_modes: 10 26
debug3: tty_make_modes: 12 18
debug3: tty_make_modes: 13 23
debug3: tty_make_modes: 14 22
debug3: tty_make_modes: 18 15
debug3: tty_make_modes: 30 0
debug3: tty_make_modes: 31 0
debug3: tty_make_modes: 32 0
debug3: tty_make_modes: 33 0
debug3: tty_make_modes: 34 0
debug3: tty_make_modes: 35 0
debug3: tty_make_modes: 36 1
debug3: tty_make_modes: 37 0
debug3: tty_make_modes: 38 1
debug3: tty_make_modes: 39 0
debug3: tty_make_modes: 40 0
debug3: tty_make_modes: 41 0
debug3: tty_make_modes: 50 1
debug3: tty_make_modes: 51 1
debug3: tty_make_modes: 52 0
debug3: tty_make_modes: 53 1
debug3: tty_make_modes: 54 1
debug3: tty_make_modes: 55 1
debug3: tty_make_modes: 56 0
debug3: tty_make_modes: 57 0
debug3: tty_make_modes: 58 0
debug3: tty_make_modes: 59 1
debug3: tty_make_modes: 60 1
debug3: tty_make_modes: 61 1
debug3: tty_make_modes: 62 0
debug3: tty_make_modes: 70 1
debug3: tty_make_modes: 71 0
debug3: tty_make_modes: 72 1
debug3: tty_make_modes: 73 0
debug3: tty_make_modes: 74 0
debug3: tty_make_modes: 75 0
debug3: tty_make_modes: 90 1
debug3: tty_make_modes: 91 1
debug3: tty_make_modes: 92 0
debug3: tty_make_modes: 93 0
debug1: Sending environment.
debug3: Ignored env HOSTNAME
debug3: Ignored env TERM
debug3: Ignored env SHELL
debug3: Ignored env HISTSIZE
debug3: Ignored env SSH_CLIENT
debug3: Ignored env SSH_TTY
debug3: Ignored env USER
debug3: Ignored env LS_COLORS
debug3: Ignored env DSM_DIR
debug3: Ignored env MIBS
debug3: Ignored env MAIL
debug3: Ignored env PATH
debug3: Ignored env INPUTRC
debug3: Ignored env PWD
debug1: Sending env LANG =3D fr_FR.UTF-8
debug2: channel 0: request env confirm 0
debug3: Ignored env DSM_CONFIG
debug3: Ignored env SSH_ASKPASS
debug3: Ignored env SHLVL
debug3: Ignored env HOME
debug3: Ignored env LOGNAME
debug3: Ignored env SSH_CONNECTION
debug3: Ignored env LESSOPEN
debug3: Ignored env G_BROKEN_FILENAMES
debug3: Ignored env _
debug2: channel 0: request shell confirm 0
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
#########################################################################=
###
ProCurve J4899A Switch 2650
Software revision H.08.106

                           RESTRICTED RIGHTS LEGEND

 Use, duplication, or disclosure by the Government is subject to=20
restrictions
 as set forth in subdivision (b) (3) (ii) of the Rights in Technical=20
Data and
 Computer Software clause at 52.227-7013.

         HEWLETT-PACKARD COMPANY, 3000 Hanover St., Palo Alto, CA 94303

Press any key to continue
#####################################################################
### Then i press enter
SW-1>exit
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
  #0 client-session (t4 r0 i0/0 o0/0 fd 4/5 cfd -1)

debug3: channel 0: close_fds r 4 w 5 e 6 c -1
Connection to 10.1.2.22 closed by remote host.
Connection to 10.1.2.22 closed.
debug1: Transferred: stdin 0, stdout 0, stderr 81 bytes in 60.7 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 1.3
debug1: Exit status -1

Thank you another time for your help to resolve this problem. ;)

Heinrich, Matthew a =E9crit :
> It may be a bug / feature of your HP Procurve...  I wonder if it interp=
reted the channel 0 shell request as the actual shell request....
>
> Normally, when I look at the debug output, right after "Entering intera=
ctive sessions", my client will request a pty and then the shell.
>
> Can you manually get on with ssh?  What do you see from the debug outpu=
t of:
>
> ssh -vvv -l operator 10.1.2.22
>
> ?
>
> -----Original Message-----
> From: DonKiShoot [mailto:don...@wa...]=20
> Sent: Tuesday, November 28, 2006 3:48 AM
> To: Heinrich, Matthew
> Cc: ssh...@li...
> Subject: Re: [Ssh-sftp-perl-users] Device does not support shell reques=
tnotpreceded by pty request
>
> Thank you very much for your response.
>
> Your solution seems to be a bit more complex but i decided to try it be=
cause i don't want to remain on a failure ;)
>
> First, i used this script to join my hp procurve 2650 as you suggest me=
 :
>
> #!/usr/bin/perl -w
> use strict;
> use Net::SSH::Perl;
> my $ssh =3D Net::SSH::Perl->new('10.1.2.22','debug' =3D> 1); $ssh->logi=
n('operator'); $ssh->shell();
>
> But, i've always got the same bug :
>
> [root@srv78supervision ~]# ./connect.pl
> srv78supervision: Reading configuration data /root/.ssh/config
> srv78supervision: Reading configuration data /etc/ssh_config
> srv78supervision: Allocated local port 1023.
> srv78supervision: Connecting to 10.1.2.22, port 22.
> srv78supervision: Remote version string: SSH-2.0-OpenSSH_3.7.1p2
>
> srv78supervision: Remote protocol version 2.0, remote software version
> OpenSSH_3.7.1p2
> srv78supervision: Net::SSH::Perl Version 1.30, protocol version 2.0.
> srv78supervision: No compat match: OpenSSH_3.7.1p2.
> srv78supervision: Connection established.
> srv78supervision: Sent key-exchange init (KEXINIT), wait response.
> srv78supervision: Algorithms, c->s: 3des-cbc hmac-sha1 none
> srv78supervision: Algorithms, s->c: 3des-cbc hmac-sha1 none
> srv78supervision: Entering Diffie-Hellman Group 1 key exchange.
> srv78supervision: Sent DH public key, waiting for reply.
> srv78supervision: Received host key, type 'ssh-rsa'.
> srv78supervision: Host '10.1.2.22' is known and matches the host key.
> srv78supervision: Computing shared secret key.
> srv78supervision: Verifying server signature.
> srv78supervision: Waiting for NEWKEYS message.
> srv78supervision: Enabling incoming encryption/MAC/compression.
> srv78supervision: Send NEWKEYS, enable outgoing encryption/MAC/compress=
ion.
> srv78supervision: Sending request for user-authentication service.
> srv78supervision: Service accepted: ssh-userauth.
> srv78supervision: Trying empty user-authentication request.
> srv78supervision: Authentication methods that can continue:=20
> publickey,password.
> srv78supervision: Next method to try is publickey.
> srv78supervision: Trying pubkey authentication with key file '/root/.ss=
h/id_dsa'
> srv78supervision: Login completed, opening dummy shell channel.
> srv78supervision: channel 0: new [client-session]
> srv78supervision: Requesting channel_open for channel 0.
> srv78supervision: channel 0: open confirm rwindow 0 rmax 32768
> srv78supervision: Got channel open confirmation, requesting shell.
> srv78supervision: Requesting service shell on channel 0.
> srv78supervision: channel 1: new [client-session]
> srv78supervision: Requesting channel_open for channel 1.
> srv78supervision: Entering interactive session.
> Received disconnect message: Device does not support shell request not =
preceded by pty request.
>  at /usr/lib/perl5/vendor_perl/5.8.8/Net/SSH/Perl/SSH2.pm line 284
>
> Do you think that this bug come from HP Procurve 2650 ?
> It's not my first problem with this material (storm broadcasting for ex=
emple), i believe that this IOS is a piece of chit !!!
>
> No more idea ? Must i give up ?
>
> Heinrich, Matthew a =E9crit :
>  =20
>> =20
>>
>> Looks like some of the formatting got messed up in transit...  =20
>>
>>
>> -----Original Message-----
>> From: ssh...@li...
>> [mailto:ssh...@li...] On Behalf=20
>> Of Heinrich, Matthew
>> Sent: Monday, November 27, 2006 4:52 PM
>> To: DonKiShoot; ssh...@li...
>> Subject: Re: [Ssh-sftp-perl-users] Device does not support shell=20
>> requestnotpreceded by pty request
>>
>> I have been working on the same sort of problem for a while now.  I=20
>> was getting this same error because the "cmd" function of=20
>> Net::SSH::Perl will always expect an exit code, and the devices to=20
>> which we are communicating do not support exit codes after each=20
>> command.  Also, the device prefers to have all commands sent through=20
>> the same channel, and Net::SSH::Perl will open a new channel for each=20
>> command when using SSHv2.
>>
>> At first, I tried copying "sub cmd" to "sub ccmd" and making it use=20
>> the same channel, but I could not get the buffers to work properly.  A=
=20
>> lot of people said to use an Expect script, but that didn't seem like=20
>> good idea, until I took a look at the Expect Perl module...
>>
>> I created a connecting script (connect.pl) which will login and get me=
=20
>> to an interactive prompt:
>>
>> ----------------------------------------------------------------------
>> --
>> --------
>> #!/usr/bin/perl
>>
>> use strict;
>> use Net::SSH::Perl;
>>
>> my $host =3D "a.b.c.d";
>> my $user =3D "uname";
>> my $pass =3D "pword";
>>
>> my $ssh =3D Net::SSH::Perl->new($host, port=3D>22); $ssh->login($user,=
=20
>> $pass); $ssh->shell();
>> ----------------------------------------------------------------------
>> --
>> --------
>>
>>
>> Next, I created the main Perl script using the Expect module, spawning=
=20
>> this connection program:
>>
>>
>> ----------------------------------------------------------------------
>> --
>> --------
>> #!/usr/bin/perl
>>
>> use Expect;
>>
>> $| =3D 1; # Auto flush output
>>
>> my $exp =3D Expect->new();
>>
>> # Prevent local echo from showing in results $exp->raw_pty(1);
>>
>> # Run connector program
>> $exp->spawn("./connect.pl");
>>
>> # Prevent output from going to STDOUT
>> (*$exp)->{exp_Log_Stdout} =3D 0;
>>
>> # Wait for initial prompt (30 sec timeout) $exp->expect(30,=20
>> "centerpoint>");
>>
>> # Send command with no output needed
>> snd("set rows 0");
>>
>> print "Sending remote command...";
>>
>> # Send command, store output in @res array @res =3D snd("show vss");
>>
>> print "OK\n\nResults:\n";
>>
>> # List output line-by-line
>> foreach $n (0..$#res) {
>>         print "$n: @res[$n]\n";
>> }
>>
>> $exp->send("exit\n");
>> $exp->soft_close();
>>
>> # This makes sending multiple commands much easier.  Instead of #=20
>> using multiple "send" and "expect" calls manually, just use snd
>>
>> sub snd ($){
>>         $exp->send(@_[0] . "\n");
>>
>>         # Use the "-re" option to specify regular expression, as
>>         # opposed to an exact pattern match.  Otherwise, you can=20
>> 	  # just list 2 arguments (timeout, pattern match)
>>         my @out =3D $exp->expect(10, "-re", 'centerpoint>$');
>>         my @newout =3D split(/\n/, @out[3]);
>>
>>         # Remove first line (in my case, it shows the command I typed,
>>         # which is not needed in the resulting output)
>>         shift @newout;
>>
>>         return wantarray ? @newout : 1; }
>> ----------------------------------------------------------------------
>> --
>> --------
>>
>>
>> This script will wait for connect.pl to present the CLI prompt (in=20
>> this case, it shows "centerpoint>"), and will be able to interact with=
=20
>> the SSH session more easily than if you modified Net::SSH::Perl, or if=
=20
>> you used TCL Expect.
>>
>>
>> -----Original Message-----
>> From: ssh...@li...
>> [mailto:ssh...@li...] On Behalf=20
>> Of DonKiShoot
>> Sent: Wednesday, November 22, 2006 8:16 AM
>> To: ssh...@li...
>> Subject: Re: [Ssh-sftp-perl-users] Device does not support shell=20
>> request notpreceded by pty request
>>
>> Hello all,
>>
>> I'm trying to send some commands to my switch HP Procurve 2650 in ssh2=
=20
>> with Net::SSH::Perl with user 'operator' and pubkey authentification.
>> It appears that i have a problem when starting to send command but=20
>> authentification seems good.
>>
>> This is sample of my perl script and next debug trace with error i
>> receive:
>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> foreach my $addr (keys %Switch) {
>> #    print "$addr, $Switch{$addr}{'login'} :\n";
>>    my $ssh =3D Net::SSH::Perl->new($addr,'debug' =3D> 1, 'use_pty' =3D=
> 1,=20
>> 'protocol' =3D> 2, 'interactive' =3D> 0, options =3D> ["RhostsAuthenti=
cation=20
>> no"]);
>>
>> #$ssh->register_handler("stdout", sub {
>> #        my($channel, $buffer) =3D @_;
>> #        print "I received this: ", $buffer->bytes;
>> #    });
>>
>>    $ssh->login($Switch{$addr}{'login'});
>>
>>    my($stdout, $stderr, $exit) =3D $ssh->cmd("\n");
>>    print "$stdout $stderr $exit\n";
>>    ($stdout, $stderr, $exit) =3D $ssh->cmd("ping $ip");
>>    print "$stdout $stderr $exit\n";
>> }
>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> srv78supervision: Reading configuration data /root/.ssh/config
>> srv78supervision: Reading configuration data /etc/ssh_config
>> srv78supervision: Allocated local port 1023.
>> srv78supervision: Connecting to 10.1.2.22, port 22.
>> srv78supervision: Remote version string: SSH-2.0-OpenSSH_3.7.1p2
>>
>> srv78supervision: Remote protocol version 2.0, remote software version
>> OpenSSH_3.7.1p2
>> srv78supervision: Net::SSH::Perl Version 1.30, protocol version 2.0.
>> srv78supervision: No compat match: OpenSSH_3.7.1p2.
>> srv78supervision: Connection established.
>> srv78supervision: Sent key-exchange init (KEXINIT), wait response.
>> srv78supervision: Algorithms, c->s: 3des-cbc hmac-sha1 none
>> srv78supervision: Algorithms, s->c: 3des-cbc hmac-sha1 none
>> srv78supervision: Entering Diffie-Hellman Group 1 key exchange.
>> srv78supervision: Sent DH public key, waiting for reply.
>> srv78supervision: Received host key, type 'ssh-rsa'.
>> srv78supervision: Host '10.1.2.22' is known and matches the host key.
>> srv78supervision: Computing shared secret key.
>> srv78supervision: Verifying server signature.
>> srv78supervision: Waiting for NEWKEYS message.
>> srv78supervision: Enabling incoming encryption/MAC/compression.
>> srv78supervision: Send NEWKEYS, enable outgoing=20
>> encryption/MAC/compression.
>> srv78supervision: Sending request for user-authentication service.
>> srv78supervision: Service accepted: ssh-userauth.
>> srv78supervision: Trying empty user-authentication request.
>> srv78supervision: Authentication methods that can continue:=20
>> publickey,password.
>> srv78supervision: Next method to try is publickey.
>> srv78supervision: Trying pubkey authentication with key file=20
>> '/root/.ssh/id_dsa'
>> srv78supervision: Login completed, opening dummy shell channel.
>> srv78supervision: channel 0: new [client-session]
>> srv78supervision: Requesting channel_open for channel 0.
>> srv78supervision: channel 0: open confirm rwindow 0 rmax 32768
>> srv78supervision: Got channel open confirmation, requesting shell.
>> srv78supervision: Requesting service shell on channel 0.
>> srv78supervision: channel 1: new [client-session]
>> srv78supervision: Requesting channel_open for channel 1.
>> srv78supervision: Entering interactive session.
>> /*Received disconnect message: Device does not support shell request=20
>> not preceded by pty request.
>> at /usr/lib/perl5/vendor_perl/5.8.8/Net/SSH/Perl/SSH2.pm line 284*/
>>
>> What can i do to resolve this problem ?
>>
>> Thx all
>>
>>
>>
>>
>> ----------------------------------------------------------------------
>> --
>> -
>> Take Surveys. Earn Cash. Influence the Future of IT Join=20
>> SourceForge.net's Techsay panel and you'll get the chance to share=20
>> your opinions on IT & business topics through brief surveys - and earn=
=20
>> cash=20
>> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEV
>> DE
>> V
>> _______________________________________________
>> Ssh-sftp-perl-users mailing list
>> Ssh...@li...
>> https://lists.sourceforge.net/lists/listinfo/ssh-sftp-perl-users
>>
>> ----------------------------------------------------------------------
>> --
>> -
>> Take Surveys. Earn Cash. Influence the Future of IT Join=20
>> SourceForge.net's Techsay panel and you'll get the chance to share=20
>> your opinions on IT & business topics through brief surveys - and earn=
=20
>> cash=20
>> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEV
>> DE
>> V
>> _______________________________________________
>> Ssh-sftp-perl-users mailing list
>> Ssh...@li...
>> https://lists.sourceforge.net/lists/listinfo/ssh-sftp-perl-users
>>
>>
>>  =20
>>    =20
>
>
>  =20