Re: [Ssh-sftp-perl-users] problems with net-ssh-perl ... pleasetake a look.
Brought to you by:
dbrobins
Menu
▾
▴
Re: [Ssh-sftp-perl-users] problems with net-ssh-perl ... pleasetake a look.
|
From: Chris F. <cfe...@vo...> - 2006-11-13 21:48:25
|
yes of course I did that.. trust me I spend all Sunday more than 8 hours
researching.. some people complains about been slow others about having
the same issue I have
some point is related to dependent modules.. but nobody really gives a
straight answer to anyone.
basically it gets stuck on this part:
perforceb: Reading configuration data /root/.ssh/config
perforceb: Reading configuration data /etc/ssh_config
perforceb: Allocated local port 1023.
perforceb: Connecting to perforcea.mydomain.example, port 22.
perforceb: Remote version string: SSH-2.0-OpenSSH_4.4
perforceb: Remote protocol version 2.0, remote software version OpenSSH_4.4
perforceb: Net::SSH::Perl Version 1.30, protocol version 2.0.
perforceb: No compat match: OpenSSH_4.4.
perforceb: Connection established.
perforceb: Sent key-exchange init (KEXINIT), wait response.
perforceb: Algorithms, c->s: 3des-cbc hmac-sha1 none
perforceb: Algorithms, s->c: 3des-cbc hmac-sha1 none
perforceb: Entering Diffie-Hellman Group 1 key exchange.
perforceb: Sent DH public key, waiting for reply.
perforceb: Received host key, type 'ssh-dss'.
perforceb: Host 'perforcea.mydomain.myexample' is known and matches the
host key.
perforceb: Computing shared secret key.
perforceb: Verifying server signature.
perforceb: Waiting for NEWKEYS message.
perforceb: Enabling incoming encryption/MAC/compression.
perforceb: Send NEWKEYS, enable outgoing encryption/MAC/compression.
perforceb: Sending request for user-authentication service.
perforceb: Service accepted: ssh-userauth.
perforceb: Trying empty user-authentication request.
perforceb: Authentication methods that can continue:
publickey,keyboard-interactive.
perforceb: Next method to try is publickey.
perforceb: Trying pubkey authentication with key file '/root/.ssh/id_dsa'
and sits there for 5 m till I get a return of "remote host close connection"
then when it works it just works..
so is on and off.. is weird...
here is some code
my $ssh = Net::SSH::Perl->new("$HOSTA", debug => 1); # DEBUG MODE
# my $ssh = Net::SSH::Perl->new("$HOSTA");
$ssh->login;
my($out, $err, $exit) = $ssh->cmd("ls -al");
print $err;
print $out;
print $exit;
open (LOG, ">>$LOGFILE") || die "Error login to file: $!";
print LOG "$err\n";
print LOG "$out\n";
print LOG "$exit";
close(LOG);
Kirkland, Bruce wrote:
> I just got your message today. I'm fairly new at this so I'm probably
> not much help. I have been testing and found it to be very slow. The
> only clues I have is to use something like the following to get a
> trace similar to ssh -v
>
> #!/usr/local/bin/perl -w
> # test the perl modules
> use Net::SSH::Perl;
> # login info
> $user="real user goes here";
> $pass="real pw goes here";
> $host="real serer goes here ";
> # for debugging, this will give you something like ssh -v
> my $ssh = Net::SSH::Perl->new($host, debug => 1);
> $ssh->login($user, $pass) ;
> ($stdout, $stderr, $exit) = $ssh->cmd("touch /tmp/$host-test");
> if ( $stderr )
> {
> print "error $stderr" ;
> exit 1;
> }
> exit;
>
>
>
>
> ------------------------------------------------------------------------
> *From:* ssh...@li...
> [mailto:ssh...@li...] *On Behalf
> Of *Frank Carreiro
> *Sent:* Monday, November 13, 2006 3:11 PM
> *To:* ssh...@li...; Chris Fernandez
> *Subject:* Re: [Ssh-sftp-perl-users] problems with net-ssh-perl ...
> pleasetake a look.
>
> I guess not. I've sent a few messages and haven't heard back from
> anyone. I've been wondering if there is a problem with sourceforge
> forums or just a lack of interest :-)
>
>
>
> >>> On Mon, Nov 13, 2006 at 1:06 pm, in message
> <455...@vo...>, Chris Fernandez
> <cfe...@vo...> wrote:
>
> mobody in this list? :-(
>
>
>
> Chris Fernandez wrote:
> > sorry, I forgot to add that I get as and exit when it wont work if I
> > wait to the end.
> >
> > Connection closed by remote host. at
> > /usr/lib64/perl5/vendor_perl/5.8.8/Net/SSH/Perl/AuthMgr.pm line 142
> >
> > I think is waiting for me to do something and times me out..
> >
> >
> > Chris Fernandez wrote:
> >
> >> my system is Gentoo GNU/Linux
> >>
> >> perl -V
> >> Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
> >> Platform:
> >> osname=linux, osvers=2.6.16-gentoo-r13, archname=x86_64-linux
> >> uname='linux vmware 2.6.16-gentoo-r13 #2 smp wed jul 19 10:44:27 edt
> >> 2006 x86_64 intel(r) xeon(tm) cpu 2.80ghz gnulinux '
> >! ;>&# 160; config_args='-des -Darchname=x86_64-linux
> -Dcccdlflags=-fPIC
> >> -Dccdlflags=-rdynamic -Dcc=x86_64-pc-linux-gnu-gcc -Dprefix=/usr
> >> -Dvendorprefix=/usr -Dsiteprefix=/usr -Dlocincpth=
> >> -Doptimize=-march=nocona -O2 -fomit-frame-pointer -pipe -Duselargefiles
> >> -Dd_semctl_semun -Dscriptdir=/usr/bin -Dman1dir=/usr/share/man/man1
> >> -Dman3dir=/usr/share/man/man3 -Dinstallman1dir=/usr/share/man/man1
> >> -Dinstallman3dir=/usr/share/man/man3 -Dman1ext=1 -Dman3ext=3pm
> >> -Dinc_version_list=5.8.0 5.8.0/x86_64-linux 5.8.2 5.8.2/x86_64-linux
> >> 5.8.4 5.8.4/x86_64-linux 5.8.5 5.8.5/x86_64-linux 5.8.6
> >> 5.8.6/x86_64-linux 5.8.7 5.8.7/x86_64-linux -Dcf_by=Gentoo -Ud_csh
> >> -Dusenm -Ui_ndbm -Ui_gdbm -Di_db
> >> -Dusrinc=/usr/include/gentoo-multilib/amd64 -Dlibpth=/! usr/loc
> al/lib64
> >> /lib64 /usr/lib64'
> >> hint=recommended, useposix=true, d_sigaction=define
> >> usethreads=undef use5005threads=undef useithreads=undef
> >> usemultiplicity=undef
> >> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
> >> use64bitint=define use64bitall=define uselongdouble=undef
> >> usemymalloc=n, bincompat5005=undef
> >> Compiler:
> >> cc='x86_64-pc-linux-gnu-gcc', ccflags ='-fno-strict-aliasing -pipe
> >> -Wdeclaration-after-statement -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64
> >> -I/usr/include/gdbm',
> >> optimize='-march=nocona -O2 -fomit-frame-pointer -pipe&#! 39;, ;
> >> cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement
> >> -I/usr/include/gdbm'
> >> ccversion='', gccversion='4.1.1 (Gentoo 4.1.1)', gccosandvers=''
> >> intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
> >> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
> >> ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
> >> lseeksize=8
> >> alignbytes=8, prototype=define
> >> Linker and Libraries:
> >> ld='x86_64-pc-linux-gnu-gcc', ldflags =' -L! /usr/lo cal/lib64'
> >> libpth=/usr/local/lib64 /lib64 /usr/lib64
> >> libs=-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
> >> perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
> >> libc=/lib/libc-2.4.so, so=so, useshrplib=false, libperl=libperl.a
> >> gnulibc_version='2.4'
> >> Dynamic Linking:
> >> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
> >> cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib64'
> >>
> >>
> >> Characteristics of this binary (from libperl):
> >> Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
> >> &! #160;&# 160; USE_LARGE_FILES USE_PERLIO
> >> Built under linux
> >> Compiled at Sep 21 2006 10:23:54
> >> @INC:
> >> /etc/perl
> >> /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux
> >> /usr/lib64/perl5/vendor_perl/5.8.8
> >> /usr/lib64/perl5/vendor_perl
> >> /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux
> >> /usr/lib64/perl5/site_perl/5.8.8
> >> /usr/lib64/perl5/site_perl
> >> /usr/lib64/perl5/5.8.8/x86_64-linux
> >> /usr/lib64/perl5/5.8.8
> >> /usr/local/lib/site_perl
> >>
> >>
> >>
> >&! gt; The issue that I am having is very weird... my script will run
> only
> >> sometimes... the majority of the times looks like it just *hangs*
> and is
> >> very slow..
> >> once in a while mostly when I have not try in 1m or more.. then it runs
> >> the first time I run it.. to go again into the *weird* status that will
> >> only run once in a while...
> >>
> >> why?
> >> anyone had the same issue?
> >> work around?
> >> bug?
> >> I will post portion of my code if needed but seen that it does works
> >> sometimes makes me think it must be something else.
> >> help!!!
> >>
> >> Thanks for your help in advance.
> >> Chris
> >>
> >>
> >>
> -------------------------------------------------------------------------
> >> Using Tomcat but need to do more? Need to support web services,
> security?
> &g! t;> Get stuff done quickly with pre-integrated technology to make
> your job easier
> >> Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> >>
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> >> _______________________________________________
> >> Ssh-sftp-perl-users mailing list
> >> Ssh...@li...
> >> https://lists.sourceforge.net/lists/listinfo/ssh-sftp-perl-users
> >>
> >>
> >>
> >
> >
> >
> -------------------------------------------------------------------------
> > Using Tomcat but need to do more? Need to support web services,
> security?
> > Get stuff done quickly with pre-integrated technology to make your
> job easier
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> > http://sel.as-us.falkag.net/se! l?c
> md=lnk&kid=120709&bid=263057&dat=121642
> > _______________________________________________
> > Ssh-sftp-perl-users mailing list
> > Ssh...@li...
> > https://lists.sourceforge.net/lists/listinfo/ssh-sftp-perl-users
> >
> >
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Ssh-sftp-perl-users mailing list
> Ssh...@li...
> https://lists.sourceforge.net/lists/listinfo/ssh-sftp-perl-users
>
> ------------------------------------------------------------------------
> NOTICE: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information.
> Any unauthorized review, use, disclosure or distribution is
> prohibited. If you are not the intended recipient, please contact the
> sender by reply email and destroy all copies of the original message.
> *****************************************************************
> This message has originated from R. L. Polk & Co.,
> 26955 Northwestern Highway, Southfield, MI 48033.
>
> R. L. Polk & Co. sends various types of email
> communications. If this email message concerns the
> potential licensing of a Polk product or service, and
> you do not wish to receive further emails regarding Polk
> products, forward this email to Do_...@po...
> with the word "remove" in the subject line.
>
> The email and any files transmitted with it are confidential
> and intended solely for the individual or entity to whom they
> are addressed.
>
> If you have received this email in error, please delete this
> message and notify the Polk System Administrator at
> pos...@po....
> *****************************************************************
>
>
|
