From: Kaplan, A. H. <AHKAPLAN@PARTNERS.ORG> - 2007-06-21 19:27:12
|
Hi there -- I don't have SELinux running on the system in question. I do have Bastille running although it does not have the same type of restrictions.=20 I did compare the /etc/pam.d/poppassd and /etc/pam.d/passwd files, and there is a marked difference between the two. If the two are supposed to have the same text, is it simply a matter of replacing that which is in the latter= =20 with that which is in the former? Thanks.=20 -----Original Message----- From: Tomas Kuliavas [mailto:to...@us...]=20 Sent: Thursday, June 21, 2007 3:20 PM To: Kaplan, Andrew H. Cc: squ...@li... Subject: RE: Problem with change_pass plugin Are you sure that issues are not related to SELinux restrictions? Are you sure that /etc/pam.d/poppassd configuration is correct? Compare it with /etc/pam.d/passwd > Hi there -- > > I downloaded and installed the poppass server rpm package, and rebooted > the > system. The problem I am now seeing is the following: When I try to change > the password from the web interface, I get a 500 Old Password Incorrect > error message. > > I can do the telnet localhost 106, but I am getting the same 500 Old > Password > Incorrect error message. I have double-checked to confirm that > I am entering the correct password. > > > > -----Original Message----- > From: Tomas Kuliavas [mailto:to...@us...] > Sent: Thursday, June 21, 2007 2:22 PM > To: Kaplan, Andrew H. > Cc: squ...@li... > Subject: Re: Problem with change_pass plugin > >> Hi there -- >> >> >> >> I took your advice and installed the change_pass plugin. I made the >> necessary >> changes >> >> that were outlined in the INSTALL file. However, I ran into the >> following >> issue: >> >> >> >> When I tried to do a telnet localhost 106, I got a connection refused >> error >> message, >> >> and a similar thing occurred when I tried to do a telnet to <ip address> >> 106. The error message that is displayed when I go through the web >> interface is: >> >> >> >> ERROR:Connection refused (111) >> >> >> >> I verified the telnet server is running on the server, and that port 106 >> is assigned >> >> to poppassd with the TCP and UDP protocols. Does anyone have any ideas >> what needs to be done to correct this? Thanks. > > Plugin needs poppass server. > > http://www.echelon.pl/pubs/poppassd.php > http://rpm.razorsedge.org/fedora-5/RE/repodata/repoview/poppassd-0-1.8.5-3.= fc5.r > e.html > > -- > Tomas > > > > > > > The information transmitted in this electronic communication is intended > only for the person or entity to whom it is addressed and may contain > confidential and/or privileged material. Any review, retransmission, > dissemination or other use of or taking of any action in reliance upon > this information by persons or entities other than the intended recipient > is prohibited. If you received this information in error, please contact > the Compliance HelpLine at 800-856-1983 and properly dispose of this > information. > > The information transmitted in this electronic communication is intended on= ly for the person or entity to whom it is addressed and may contain confide= ntial and/or privileged material. Any review, retransmission, dissemination= or other use of or taking of any action in reliance upon this information = by persons or entities other than the intended recipient is prohibited. If = you received this information in error, please contact the Compliance HelpL= ine at 800-856-1983 and properly dispose of this information. |