|
From: Mark N. <mar...@ho...> - 2006-01-13 18:32:22
|
Hi, I normally have 3-5 concurrent SQuirreL sessions open to various schemas. When I upgraded from 1.2beta5 to version 2.0 a couple months back, I started to have a lag when switching from one session to another. In 1.2beta5, clicking in a different panel would switch to that session instantly, like clicking into a different window to switch applications at the system level. After upgrading, there was a 3-4 second lag before the new panel became active -- not a crippling problem, but annoying. This occurs when directly clicking a panel or using the "Active Session" drop-down. I've switched to version 2.1 today; my perception is that it is a little faster in this regard (although I didn't put a stopwatch on either version), but still a couple seconds to activate a panel. Does anyone else see this, or have an explanation ?? I've wondered if there is some behind the scenes monitoring going on, to keep code completion and other options up to date. BTW, I had switched to 1.2beta6 quite a while back, but saw similar (or the same) issues; I eventually was interested enough in code completion that I was willing to take the delay. Thanks for the advice, Mark |
|
From: Gerd W. <bir...@t-...> - 2006-01-13 18:51:16
|
Hi Mark, could you try out the following an tell me if one or more changes the lag? 1. Check the New Session Properties if your are using the Netbeans editor. If not please switch to it and try again. 2. Remove the codecompletion.jar from your plugin dir, restart SQuirreL, and try again. 3. Remove the syntax.jar from your plugin dir, restart SQuirreL, and try again. Thanks Gerd Mark Neher wrote: > Hi, > > I normally have 3-5 concurrent SQuirreL sessions open to various > schemas. When I upgraded from 1.2beta5 to version 2.0 a couple months > back, I started to have a lag when switching from one session to > another. In 1.2beta5, clicking in a different panel would switch to > that session instantly, like clicking into a different window to switch > applications at the system level. After upgrading, there was a 3-4 > second lag before the new panel became active -- not a crippling > problem, but annoying. This occurs when directly clicking a panel or > using the "Active Session" drop-down. I've switched to version 2.1 > today; my perception is that it is a little faster in this regard > (although I didn't put a stopwatch on either version), but still a > couple seconds to activate a panel. > > Does anyone else see this, or have an explanation ?? I've wondered if > there is some behind the scenes monitoring going on, to keep code > completion and other options up to date. BTW, I had switched to > 1.2beta6 quite a while back, but saw similar (or the same) issues; I > eventually was interested enough in code completion that I was willing > to take the delay. > > Thanks for the advice, > > Mark > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. Do you grep through log > files > for problems? Stop! Download the new AJAX search engine that makes > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! > http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click > _______________________________________________ > Squirrel-sql-users mailing list > Squ...@li... > https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users > |
|
From: Mark N. <mar...@ho...> - 2006-01-13 19:49:10
|
Thanks for the quick response !! Regarding your suggestions: 1. I was and am using the NetBeans editor 2. I removed codecompletion.jar, restarted, and saw no change 3. I removed syntax.jar, restarted, and saw no change Thanks, Mark >From: Gerd Wagner <bir...@t-...> >To: Mark Neher <mar...@ho...> >CC: squ...@li... >Subject: Re: [Squirrel-sql-users] performance issues when switching panels >Date: Fri, 13 Jan 2006 19:50:59 +0100 > >Hi Mark, > >could you try out the following an tell me if one or more changes the lag? > >1. Check the New Session Properties if your are using the Netbeans editor. >If not please switch to it and try again. > >2. Remove the codecompletion.jar from your plugin dir, restart SQuirreL, >and try again. > >3. Remove the syntax.jar from your plugin dir, restart SQuirreL, and try >again. > >Thanks > >Gerd > >Mark Neher wrote: >>Hi, >> >>I normally have 3-5 concurrent SQuirreL sessions open to various schemas. >>When I upgraded from 1.2beta5 to version 2.0 a couple months back, I >>started to have a lag when switching from one session to another. In >>1.2beta5, clicking in a different panel would switch to that session >>instantly, like clicking into a different window to switch applications at >>the system level. After upgrading, there was a 3-4 second lag before the >>new panel became active -- not a crippling problem, but annoying. This >>occurs when directly clicking a panel or using the "Active Session" >>drop-down. I've switched to version 2.1 today; my perception is that it >>is a little faster in this regard (although I didn't put a stopwatch on >>either version), but still a couple seconds to activate a panel. >> >>Does anyone else see this, or have an explanation ?? I've wondered if >>there is some behind the scenes monitoring going on, to keep code >>completion and other options up to date. BTW, I had switched to 1.2beta6 >>quite a while back, but saw similar (or the same) issues; I eventually was >>interested enough in code completion that I was willing to take the delay. >> >>Thanks for the advice, >> >>Mark >> >> >> >> >>------------------------------------------------------- >>This SF.net email is sponsored by: Splunk Inc. Do you grep through log >>files >>for problems? Stop! Download the new AJAX search engine that makes >>searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! >>http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click >>_______________________________________________ >>Squirrel-sql-users mailing list >>Squ...@li... >>https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users >> > |
|
From: Gerd W. <bir...@t-...> - 2006-01-15 12:08:48
|
Hi Mark,
sorry that my tests didn't show any effect. All I can say at the moment
is that your problem is not a common problem. At work more than 20
colleagues of mine are using SQuirreL on different Windows and Linux
versions and no one ever complained about 3-4 seconds for switching
between sessions.
I have seen that with some look and feels switching session windows is
faster than with others but by far not in the range of seconds. You
might though try a Metal look and feel.
The last thing I can offer is that you try out the little test class
below. It opens a Desktop window with four child windows
(JInternalFrames) with editor panes on each. If you can reproduce the
lag on this example I'm pretty sure it is a problem with your system.
Gerd
/////////////////////////////////////////////////////////
//
package pack;
import javax.swing.*;
public class InternalFrameTest
{
public static void main(String[] args)
{
JFrame f = new JFrame();
JDesktopPane desk = new JDesktopPane();
f.getContentPane().add(desk);
JInternalFrame jif;
jif = new JInternalFrame();
jif.getContentPane().add(new JEditorPane());
jif.setBounds(0,0,200,200);
jif.setVisible(true);
desk.add(jif);
jif = new JInternalFrame();
jif.getContentPane().add(new JEditorPane());
jif.setBounds(0,210,200,200);
jif.setVisible(true);
desk.add(jif);
jif = new JInternalFrame();
jif.getContentPane().add(new JEditorPane());
jif.setBounds(210,0,200,200);
jif.setVisible(true);
desk.add(jif);
jif = new JInternalFrame();
jif.getContentPane().add(new JEditorPane());
jif.setBounds(210,210,200,200);
jif.setVisible(true);
desk.add(jif);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.setSize(500,500);
f.setVisible(true);
}
}
//
/////////////////////////////////////
Mark Neher wrote:
>
> Thanks for the quick response !! Regarding your suggestions:
>
> 1. I was and am using the NetBeans editor
>
> 2. I removed codecompletion.jar, restarted, and saw no change
>
> 3. I removed syntax.jar, restarted, and saw no change
>
> Thanks,
>
> Mark
>
>
>> From: Gerd Wagner <bir...@t-...>
>> To: Mark Neher <mar...@ho...>
>> CC: squ...@li...
>> Subject: Re: [Squirrel-sql-users] performance issues when switching
>> panels
>> Date: Fri, 13 Jan 2006 19:50:59 +0100
>>
>> Hi Mark,
>>
>> could you try out the following an tell me if one or more changes the
>> lag?
>>
>> 1. Check the New Session Properties if your are using the Netbeans
>> editor. If not please switch to it and try again.
>>
>> 2. Remove the codecompletion.jar from your plugin dir, restart
>> SQuirreL, and try again.
>>
>> 3. Remove the syntax.jar from your plugin dir, restart SQuirreL, and
>> try again.
>>
>> Thanks
>>
>> Gerd
>>
>> Mark Neher wrote:
>>
>>> Hi,
>>>
>>> I normally have 3-5 concurrent SQuirreL sessions open to various
>>> schemas. When I upgraded from 1.2beta5 to version 2.0 a couple
>>> months back, I started to have a lag when switching from one session
>>> to another. In 1.2beta5, clicking in a different panel would switch
>>> to that session instantly, like clicking into a different window to
>>> switch applications at the system level. After upgrading, there was
>>> a 3-4 second lag before the new panel became active -- not a
>>> crippling problem, but annoying. This occurs when directly clicking
>>> a panel or using the "Active Session" drop-down. I've switched to
>>> version 2.1 today; my perception is that it is a little faster in
>>> this regard (although I didn't put a stopwatch on either version),
>>> but still a couple seconds to activate a panel.
>>>
>>> Does anyone else see this, or have an explanation ?? I've wondered
>>> if there is some behind the scenes monitoring going on, to keep code
>>> completion and other options up to date. BTW, I had switched to
>>> 1.2beta6 quite a while back, but saw similar (or the same) issues; I
>>> eventually was interested enough in code completion that I was
>>> willing to take the delay.
>>>
>>> Thanks for the advice,
>>>
>>> Mark
>>>
|
|
From: Mark N. <mar...@ho...> - 2006-01-16 18:29:14
|
Interesting -- I switched to Metal L&F as you suggested and the lag went
away. Switching back (to JGoodies Plastic 3D -- is that the default ?? I
have never changed it) re-introduced the lag. I'll have to check at home
and see what L&F I have selected there, as I have no lag there on an XP box;
just on my Linux box at work.
Thanks for the advice,
Mark
>From: Gerd Wagner <bir...@t-...>
>To: Mark Neher <mar...@ho...>
>CC: squ...@li...
>Subject: Re: [Squirrel-sql-users] performance issues when switching panels
>Date: Sun, 15 Jan 2006 13:08:44 +0100
>
>Hi Mark,
>
>sorry that my tests didn't show any effect. All I can say at the moment is
>that your problem is not a common problem. At work more than 20 colleagues
>of mine are using SQuirreL on different Windows and Linux versions and no
>one ever complained about 3-4 seconds for switching between sessions.
>
>I have seen that with some look and feels switching session windows is
>faster than with others but by far not in the range of seconds. You might
>though try a Metal look and feel.
>
>The last thing I can offer is that you try out the little test class below.
>It opens a Desktop window with four child windows (JInternalFrames) with
>editor panes on each. If you can reproduce the lag on this example I'm
>pretty sure it is a problem with your system.
>
>Gerd
>
>/////////////////////////////////////////////////////////
>//
>package pack;
>
>import javax.swing.*;
>
>public class InternalFrameTest
>{
>
> public static void main(String[] args)
> {
> JFrame f = new JFrame();
>
> JDesktopPane desk = new JDesktopPane();
> f.getContentPane().add(desk);
>
> JInternalFrame jif;
>
> jif = new JInternalFrame();
> jif.getContentPane().add(new JEditorPane());
> jif.setBounds(0,0,200,200);
> jif.setVisible(true);
> desk.add(jif);
>
> jif = new JInternalFrame();
> jif.getContentPane().add(new JEditorPane());
> jif.setBounds(0,210,200,200);
> jif.setVisible(true);
> desk.add(jif);
>
> jif = new JInternalFrame();
> jif.getContentPane().add(new JEditorPane());
> jif.setBounds(210,0,200,200);
> jif.setVisible(true);
> desk.add(jif);
>
> jif = new JInternalFrame();
> jif.getContentPane().add(new JEditorPane());
> jif.setBounds(210,210,200,200);
> jif.setVisible(true);
> desk.add(jif);
>
>
> f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
> f.setSize(500,500);
> f.setVisible(true);
> }
>}
>//
>/////////////////////////////////////
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>Mark Neher wrote:
>>
>>Thanks for the quick response !! Regarding your suggestions:
>>
>>1. I was and am using the NetBeans editor
>>
>>2. I removed codecompletion.jar, restarted, and saw no change
>>
>>3. I removed syntax.jar, restarted, and saw no change
>>
>>Thanks,
>>
>>Mark
>>
>>
>>>From: Gerd Wagner <bir...@t-...>
>>>To: Mark Neher <mar...@ho...>
>>>CC: squ...@li...
>>>Subject: Re: [Squirrel-sql-users] performance issues when switching
>>>panels
>>>Date: Fri, 13 Jan 2006 19:50:59 +0100
>>>
>>>Hi Mark,
>>>
>>>could you try out the following an tell me if one or more changes the
>>>lag?
>>>
>>>1. Check the New Session Properties if your are using the Netbeans
>>>editor. If not please switch to it and try again.
>>>
>>>2. Remove the codecompletion.jar from your plugin dir, restart SQuirreL,
>>>and try again.
>>>
>>>3. Remove the syntax.jar from your plugin dir, restart SQuirreL, and try
>>>again.
>>>
>>>Thanks
>>>
>>>Gerd
>>>
>>>Mark Neher wrote:
>>>
>>>>Hi,
>>>>
>>>>I normally have 3-5 concurrent SQuirreL sessions open to various
>>>>schemas. When I upgraded from 1.2beta5 to version 2.0 a couple months
>>>>back, I started to have a lag when switching from one session to
>>>>another. In 1.2beta5, clicking in a different panel would switch to
>>>>that session instantly, like clicking into a different window to switch
>>>>applications at the system level. After upgrading, there was a 3-4
>>>>second lag before the new panel became active -- not a crippling
>>>>problem, but annoying. This occurs when directly clicking a panel or
>>>>using the "Active Session" drop-down. I've switched to version 2.1
>>>>today; my perception is that it is a little faster in this regard
>>>>(although I didn't put a stopwatch on either version), but still a
>>>>couple seconds to activate a panel.
>>>>
>>>>Does anyone else see this, or have an explanation ?? I've wondered if
>>>>there is some behind the scenes monitoring going on, to keep code
>>>>completion and other options up to date. BTW, I had switched to
>>>>1.2beta6 quite a while back, but saw similar (or the same) issues; I
>>>>eventually was interested enough in code completion that I was willing
>>>>to take the delay.
>>>>
>>>>Thanks for the advice,
>>>>
>>>>Mark
>>>>
|
|
From: Gerd W. <bir...@t-...> - 2006-01-18 20:47:29
|
Hi Mark,
Mark Neher wrote:
>
> Interesting -- I switched to Metal L&F as you suggested and the lag went
> away. Switching back (to JGoodies Plastic 3D -- is that the default ??
> I have never changed it) re-introduced the lag. I'll have to check at
> home and see what L&F I have selected there, as I have no lag there on
> an XP box; just on my Linux box at work.
yes, JGoodies Plastic 3D with Sky Bluer theme is the default.
Good that the Look and Feel switch removed the lag. Since I never heard
of your problem before I wouldn't like to switch the default right now.
But if more people experience the same problem as you do I'll turn the
default to a Metal theme.
Gerd
>
> Thanks for the advice,
>
> Mark
>
>
>> From: Gerd Wagner <bir...@t-...>
>> To: Mark Neher <mar...@ho...>
>> CC: squ...@li...
>> Subject: Re: [Squirrel-sql-users] performance issues when switching
>> panels
>> Date: Sun, 15 Jan 2006 13:08:44 +0100
>>
>> Hi Mark,
>>
>> sorry that my tests didn't show any effect. All I can say at the
>> moment is that your problem is not a common problem. At work more than
>> 20 colleagues of mine are using SQuirreL on different Windows and
>> Linux versions and no one ever complained about 3-4 seconds for
>> switching between sessions.
>>
>> I have seen that with some look and feels switching session windows is
>> faster than with others but by far not in the range of seconds. You
>> might though try a Metal look and feel.
>>
>> The last thing I can offer is that you try out the little test class
>> below. It opens a Desktop window with four child windows
>> (JInternalFrames) with editor panes on each. If you can reproduce the
>> lag on this example I'm pretty sure it is a problem with your system.
>>
>> Gerd
>>
>> /////////////////////////////////////////////////////////
>> //
>> package pack;
>>
>> import javax.swing.*;
>>
>> public class InternalFrameTest
>> {
>>
>> public static void main(String[] args)
>> {
>> JFrame f = new JFrame();
>>
>> JDesktopPane desk = new JDesktopPane();
>> f.getContentPane().add(desk);
>>
>> JInternalFrame jif;
>>
>> jif = new JInternalFrame();
>> jif.getContentPane().add(new JEditorPane());
>> jif.setBounds(0,0,200,200);
>> jif.setVisible(true);
>> desk.add(jif);
>>
>> jif = new JInternalFrame();
>> jif.getContentPane().add(new JEditorPane());
>> jif.setBounds(0,210,200,200);
>> jif.setVisible(true);
>> desk.add(jif);
>>
>> jif = new JInternalFrame();
>> jif.getContentPane().add(new JEditorPane());
>> jif.setBounds(210,0,200,200);
>> jif.setVisible(true);
>> desk.add(jif);
>>
>> jif = new JInternalFrame();
>> jif.getContentPane().add(new JEditorPane());
>> jif.setBounds(210,210,200,200);
>> jif.setVisible(true);
>> desk.add(jif);
>>
>>
>> f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
>> f.setSize(500,500);
>> f.setVisible(true);
>> }
>> }
>> //
>> /////////////////////////////////////
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Mark Neher wrote:
>>>
>>> Thanks for the quick response !! Regarding your suggestions:
>>>
>>> 1. I was and am using the NetBeans editor
>>>
>>> 2. I removed codecompletion.jar, restarted, and saw no change
>>>
>>> 3. I removed syntax.jar, restarted, and saw no change
>>>
>>> Thanks,
>>>
>>> Mark
>>>
>>>
>>>> From: Gerd Wagner <bir...@t-...>
>>>> To: Mark Neher <mar...@ho...>
>>>> CC: squ...@li...
>>>> Subject: Re: [Squirrel-sql-users] performance issues when switching
>>>> panels
>>>> Date: Fri, 13 Jan 2006 19:50:59 +0100
>>>>
>>>> Hi Mark,
>>>>
>>>> could you try out the following an tell me if one or more changes
>>>> the lag?
>>>>
>>>> 1. Check the New Session Properties if your are using the Netbeans
>>>> editor. If not please switch to it and try again.
>>>>
>>>> 2. Remove the codecompletion.jar from your plugin dir, restart
>>>> SQuirreL, and try again.
>>>>
>>>> 3. Remove the syntax.jar from your plugin dir, restart SQuirreL, and
>>>> try again.
>>>>
>>>> Thanks
>>>>
>>>> Gerd
>>>>
>>>> Mark Neher wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> I normally have 3-5 concurrent SQuirreL sessions open to various
>>>>> schemas. When I upgraded from 1.2beta5 to version 2.0 a couple
>>>>> months back, I started to have a lag when switching from one
>>>>> session to another. In 1.2beta5, clicking in a different panel
>>>>> would switch to that session instantly, like clicking into a
>>>>> different window to switch applications at the system level. After
>>>>> upgrading, there was a 3-4 second lag before the new panel became
>>>>> active -- not a crippling problem, but annoying. This occurs when
>>>>> directly clicking a panel or using the "Active Session" drop-down.
>>>>> I've switched to version 2.1 today; my perception is that it is a
>>>>> little faster in this regard (although I didn't put a stopwatch on
>>>>> either version), but still a couple seconds to activate a panel.
>>>>>
>>>>> Does anyone else see this, or have an explanation ?? I've wondered
>>>>> if there is some behind the scenes monitoring going on, to keep
>>>>> code completion and other options up to date. BTW, I had switched
>>>>> to 1.2beta6 quite a while back, but saw similar (or the same)
>>>>> issues; I eventually was interested enough in code completion that
>>>>> I was willing to take the delay.
>>>>>
>>>>> Thanks for the advice,
>>>>>
>>>>> Mark
>>>>>
>
>
>
|
|
From: Rob M. <Rob...@co...> - 2006-01-18 20:53:09
|
Gerd Wagner wrote: > yes, JGoodies Plastic 3D with Sky Bluer theme is the default. > > Good that the Look and Feel switch removed the lag. Since I never > heard of your problem before I wouldn't like to switch the default > right now. But if more people experience the same problem as you do > I'll turn the default to a Metal theme. > I'm quite fond of the kunstoff L&F myself. It just looks very professional IMHO. Rob |
|
From: Rob M. <Rob...@co...> - 2006-01-16 11:11:23
|
Mark Neher wrote: > Hi, > > I normally have 3-5 concurrent SQuirreL sessions open to various > schemas. When I upgraded from 1.2beta5 to version 2.0 a couple months > back, I started to have a lag when switching from one session to > another. In 1.2beta5, clicking in a different panel would switch to > that session instantly, like clicking into a different window to > switch applications at the system level. After upgrading, there was a > 3-4 second lag before the new panel became active -- not a crippling > problem, but annoying. This occurs when directly clicking a panel or > using the "Active Session" drop-down. I've switched to version 2.1 > today; my perception is that it is a little faster in this regard > (although I didn't put a stopwatch on either version), but still a > couple seconds to activate a panel. > > Does anyone else see this, or have an explanation ?? I've wondered if > there is some behind the scenes monitoring going on, to keep code > completion and other options up to date. BTW, I had switched to > 1.2beta6 quite a while back, but saw similar (or the same) issues; I > eventually was interested enough in code completion that I was willing > to take the delay. Hi Mark, By any chance, are you viewing binary data in the contents tab of the object tree panel for a table in the session you are switching to or from? I recently noticed similar behavior for this type of data. Rob Manning |
