squirrel-sql-users Mailing List for SQuirreL SQL Client (Page 8)

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Please remove me from this distribution list.  Thank you.

Am 05.03.21 um 07:34 schrieb H Gz:
> start "SQuirreL SQL Client" /B "%LOCAL_JAVA%" -Dsun.awt.nopixfmt=true 
> -Dsun.java2d.noddraw=true -cp %CP% 
> -splash:"%SQUIRREL_SQL_HOME%/icons/splash.jpg" net. 
> sourceforge.squirrel_sql.client.Main %TMP_PARMS%

put -userdir D:\app with a leading blank at the end of the line above.

Gerd

> 
> 
> 
> Thanks,
> Wonki
> 
> 2021년 3월 5일 (금) 오전 3:08, Gerd Wagner <ger...@t-... 
> <mailto:ger...@t-...>>님이 작성:
> 
> 
> 
>     Am 03.03.21 um 07:21 schrieb H Gz:
>      > Hello Gerd,
>      >
>      > Thanks for the advice. I will test it by using the command
>      > squirrel-sql.bat -userdir D:\app in CMD.
>      >
>      > But, is there any way to modify the inside of the bat file?
>     A .bat-file is text file just open and edit it with some editor of your
>     choice. On windows I often use this one:
>     https://notepad-plus-plus.org/ <https://notepad-plus-plus.org/>
> 
> 
>     Gerd
> 
> 
>      > Running CMD
>      > every time seems cumbersome.
>      > What I want is to modify the inside of the bat file (add the
>     -userdir
>      > option) and run it normally when I run the shortcut icon.
>      >
>      > Thanks,
>      > Wonki
>      >
>      > 2021년 3월 1일 (월) 오전 4:54, Gerd Wagner
>     <ger...@t-... <mailto:ger...@t-...>
>      > <mailto:ger...@t-... <mailto:gerdhwagner@t-
>     online.de>>>님이 작성:
>      >
>      >     Hello  Wonki,
>      >     from looking at your squirrel-sql_4.1.log I guess SQuirreL
>     can't access
>      >        its user folder C:\Users\user\.squirrel-sql\.
>      >
>      >     Perhaps there is a permission issue. You could check that or
>     you may
>      >     configure SQuirreL to use a different user folder.
>      >     This can be done by using the -userdir command line parameter.
>      >
>      >     Gerd
>      >
>      >
>      >     Am 25.02.21 um 02:50 schrieb H Gz:
>      >      > Hello,
>      >      >
>      >      > I installed SQuirreL and tried to open a session with
>     Actian Vector
>      >      > v6.0, but it failed with an error.
>      >      > SQuirreL version has two versions, 3.7 and 4.1,
>      >      > In version 4.1,'Opening Session Error' and'Error occured
>     during task
>      >      > execution: null' errors occurred.
>      >      > In version 3.7, opening the session was successful, but an
>      >     error'Error
>      >      > occured during task execution: null' occurred immediately
>     after the
>      >      > session was opened. And as soon as I tried to write the
>     alphabet
>      >     in an
>      >      > open session, SQuirreL stopped (no menu clicks, no writing).
>      >      >
>      >      > SQuirreL interlocking attempts and considerations are as
>     follows. I
>      >      > checked all of the following and repeated the reinstallation
>      >     dozens of
>      >      > times.
>      >      >
>      >      > 1. Java settings
>      >      > -Reinstall Java (jdk 1.8 and jre 1.8). Previously, only
>     jre 1.8 was
>      >      > installed
>      >      > -Java environment variable modification. Setting jdk
>     directory as
>      >     user
>      >      > variable and system variable.
>      >      > Previously, only the jre directory was set as a variable, and
>      >     only the
>      >      > system variable was set.
>      >      >
>      >      > 2. Reinstall SQuirreL
>      >      > -Proceed by installing version 3.7 and 4.1 respectively
>      >      > -Try alternately installing the installation location to
>     drive C
>      >     and drive D
>      >      > -Set the installation location address to contain only
>     English.
>      >      >
>      >      > 3. iijdbc file (Actian Vector JDBC driver)
>      >      > -Try using the iijdbc.jar file in version 4.3.7 and 4.4
>     respectively.
>      >      >
>      >      > 4. Find and delete the temp directory and Windows registry
>     used when
>      >      > installing SQuirreL and repeat the process
>      >      >
>      >      > How can I do?
>      >      >
>      >      > I also attached a log recorded when an error occurred.
>      >      >
>      >      > Thanks,
>      >      > Wonki
>      >      >
>      >      >
>      >      > _______________________________________________
>      >      > Squirrel-sql-users mailing list
>      >      > Squ...@li...
>     <mailto:Squ...@li...>
>      >     <mailto:Squ...@li...
>     <mailto:Squ...@li...>>
>      >      >
>     https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>     <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users>
>      >   
>       <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>     <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users>>
>      >      >
>      >
> 

Hello Gerd,

I added -userdir=D:\app to the end of the contents of the .bat file and ran
it. However, unlike when running in cmd, userdir is not recognized as
D:\app. Below is the content of the bat file.

@echo off

@rem IZPACK_JAVA is filtered in by the IzPack installer when this script is
installed
set "IZPACK_JAVA=%JAVA_HOME%"

@rem We detect the java executable to use according to the following
algorithm:
@rem
@rem 1.If the one used by the IzPack installer is available then use that;
otherwise
@rem 2.Use the java that is in the command path.
@rem

if exist "%IZPACK_JAVA%\bin\javaw.exe" (
  set "LOCAL_JAVA=%IZPACK_JAVA%\bin\javaw.exe"
) else (
  set LOCAL_JAVA=javaw.exe
)

echo Using java: %LOCAL_JAVA%

set basedir=%~f0
:strip
set removed=%basedir:~-1%
set basedir=%basedir:~0,-1%
if NOT "%removed%"=="\" goto strip
set SQUIRREL_SQL_HOME=%basedir%

"%LOCAL_JAVA%" -cp "%SQUIRREL_SQL_HOME%\lib\versioncheck.jar"
JavaVersionChecker 1.8 9 10 11 12 13 14
if ErrorLevel 1 goto ExitForWrongJavaVersion

:launchsquirrel
SET CP="%SQUIRREL_SQL_HOME%\squirrel-sql.jar;%SQUIRREL_SQL_HOME%\lib\*"
echo "CP=%CP%"

SET TMP_PARMS=--log-config-file "%SQUIRREL_SQL_HOME%\log4j.properties"
--squirrel-home "%SQUIRREL_SQL_HOME%" %1 %2 %3 %4 %5 %6 %7 %8 %9

@rem -Dsun.java2d.noddraw=true prevents performance problems on Win32
systems.

@rem Run with no command window. This may not work with versions of Windows
prior to XP.
@rem Remove'start "SQuirreL SQL Client" /B' for compatibility only if
necessary
start "SQuirreL SQL Client" /B "%LOCAL_JAVA%" -Dsun.awt.nopixfmt=true
-Dsun.java2d.noddraw=true -cp %CP%
-splash:"%SQUIRREL_SQL_HOME%/icons/splash.jpg" net.
sourceforge.squirrel_sql.client.Main %TMP_PARMS%

:ExitForWrongJavaVersion

-userdir D:\app

Thanks,
Wonki

2021년 3월 5일 (금) 오전 3:08, Gerd Wagner <ger...@t-...>님이 작성:

>
>
> Am 03.03.21 um 07:21 schrieb H Gz:
> > Hello Gerd,
> >
> > Thanks for the advice. I will test it by using the command
> > squirrel-sql.bat -userdir D:\app in CMD.
> >
> > But, is there any way to modify the inside of the bat file?
> A .bat-file is text file just open and edit it with some editor of your
> choice. On windows I often use this one:
> https://notepad-plus-plus.org/
>
>
> Gerd
>
>
> > Running CMD
> > every time seems cumbersome.
> > What I want is to modify the inside of the bat file (add the -userdir
> > option) and run it normally when I run the shortcut icon.
> >
> > Thanks,
> > Wonki
> >
> > 2021년 3월 1일 (월) 오전 4:54, Gerd Wagner <ger...@t-...
> > <mailto:ger...@t-...>>님이 작성:
> >
> >     Hello  Wonki,
> >     from looking at your squirrel-sql_4.1.log I guess SQuirreL can't
> access
> >        its user folder C:\Users\user\.squirrel-sql\.
> >
> >     Perhaps there is a permission issue. You could check that or you may
> >     configure SQuirreL to use a different user folder.
> >     This can be done by using the -userdir command line parameter.
> >
> >     Gerd
> >
> >
> >     Am 25.02.21 um 02:50 schrieb H Gz:
> >      > Hello,
> >      >
> >      > I installed SQuirreL and tried to open a session with Actian
> Vector
> >      > v6.0, but it failed with an error.
> >      > SQuirreL version has two versions, 3.7 and 4.1,
> >      > In version 4.1,'Opening Session Error' and'Error occured during
> task
> >      > execution: null' errors occurred.
> >      > In version 3.7, opening the session was successful, but an
> >     error'Error
> >      > occured during task execution: null' occurred immediately after
> the
> >      > session was opened. And as soon as I tried to write the alphabet
> >     in an
> >      > open session, SQuirreL stopped (no menu clicks, no writing).
> >      >
> >      > SQuirreL interlocking attempts and considerations are as follows.
> I
> >      > checked all of the following and repeated the reinstallation
> >     dozens of
> >      > times.
> >      >
> >      > 1. Java settings
> >      > -Reinstall Java (jdk 1.8 and jre 1.8). Previously, only jre 1.8
> was
> >      > installed
> >      > -Java environment variable modification. Setting jdk directory as
> >     user
> >      > variable and system variable.
> >      > Previously, only the jre directory was set as a variable, and
> >     only the
> >      > system variable was set.
> >      >
> >      > 2. Reinstall SQuirreL
> >      > -Proceed by installing version 3.7 and 4.1 respectively
> >      > -Try alternately installing the installation location to drive C
> >     and drive D
> >      > -Set the installation location address to contain only English.
> >      >
> >      > 3. iijdbc file (Actian Vector JDBC driver)
> >      > -Try using the iijdbc.jar file in version 4.3.7 and 4.4
> respectively.
> >      >
> >      > 4. Find and delete the temp directory and Windows registry used
> when
> >      > installing SQuirreL and repeat the process
> >      >
> >      > How can I do?
> >      >
> >      > I also attached a log recorded when an error occurred.
> >      >
> >      > Thanks,
> >      > Wonki
> >      >
> >      >
> >      > _______________________________________________
> >      > Squirrel-sql-users mailing list
> >      > Squ...@li...
> >     <mailto:Squ...@li...>
> >      > https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
> >     <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users>
> >      >
> >
>

Am 03.03.21 um 07:21 schrieb H Gz:
> Hello Gerd,
> 
> Thanks for the advice. I will test it by using the command 
> squirrel-sql.bat -userdir D:\app in CMD.
> 
> But, is there any way to modify the inside of the bat file?
A .bat-file is text file just open and edit it with some editor of your 
choice. On windows I often use this one:
https://notepad-plus-plus.org/

Gerd

> Running CMD 
> every time seems cumbersome.
> What I want is to modify the inside of the bat file (add the -userdir 
> option) and run it normally when I run the shortcut icon.
> 
> Thanks,
> Wonki
> 
> 2021년 3월 1일 (월) 오전 4:54, Gerd Wagner <ger...@t-... 
> <mailto:ger...@t-...>>님이 작성:
> 
>     Hello  Wonki,
>     from looking at your squirrel-sql_4.1.log I guess SQuirreL can't access
>        its user folder C:\Users\user\.squirrel-sql\.
> 
>     Perhaps there is a permission issue. You could check that or you may
>     configure SQuirreL to use a different user folder.
>     This can be done by using the -userdir command line parameter.
> 
>     Gerd
> 
> 
>     Am 25.02.21 um 02:50 schrieb H Gz:
>      > Hello,
>      >
>      > I installed SQuirreL and tried to open a session with Actian Vector
>      > v6.0, but it failed with an error.
>      > SQuirreL version has two versions, 3.7 and 4.1,
>      > In version 4.1,'Opening Session Error' and'Error occured during task
>      > execution: null' errors occurred.
>      > In version 3.7, opening the session was successful, but an
>     error'Error
>      > occured during task execution: null' occurred immediately after the
>      > session was opened. And as soon as I tried to write the alphabet
>     in an
>      > open session, SQuirreL stopped (no menu clicks, no writing).
>      >
>      > SQuirreL interlocking attempts and considerations are as follows. I
>      > checked all of the following and repeated the reinstallation
>     dozens of
>      > times.
>      >
>      > 1. Java settings
>      > -Reinstall Java (jdk 1.8 and jre 1.8). Previously, only jre 1.8 was
>      > installed
>      > -Java environment variable modification. Setting jdk directory as
>     user
>      > variable and system variable.
>      > Previously, only the jre directory was set as a variable, and
>     only the
>      > system variable was set.
>      >
>      > 2. Reinstall SQuirreL
>      > -Proceed by installing version 3.7 and 4.1 respectively
>      > -Try alternately installing the installation location to drive C
>     and drive D
>      > -Set the installation location address to contain only English.
>      >
>      > 3. iijdbc file (Actian Vector JDBC driver)
>      > -Try using the iijdbc.jar file in version 4.3.7 and 4.4 respectively.
>      >
>      > 4. Find and delete the temp directory and Windows registry used when
>      > installing SQuirreL and repeat the process
>      >
>      > How can I do?
>      >
>      > I also attached a log recorded when an error occurred.
>      >
>      > Thanks,
>      > Wonki
>      >
>      >
>      > _______________________________________________
>      > Squirrel-sql-users mailing list
>      > Squ...@li...
>     <mailto:Squ...@li...>
>      > https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>     <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users>
>      >
> 

Hello Gerd,

Thanks for the advice. I will test it by using the command squirrel-sql.bat
-userdir D:\app in CMD.

But, is there any way to modify the inside of the bat file? Running CMD
every time seems cumbersome.
What I want is to modify the inside of the bat file (add the -userdir
option) and run it normally when I run the shortcut icon.

Thanks,
Wonki

2021년 3월 1일 (월) 오전 4:54, Gerd Wagner <ger...@t-...>님이 작성:

> Hello  Wonki,
> from looking at your squirrel-sql_4.1.log I guess SQuirreL can't access
>   its user folder C:\Users\user\.squirrel-sql\.
>
> Perhaps there is a permission issue. You could check that or you may
> configure SQuirreL to use a different user folder.
> This can be done by using the -userdir command line parameter.
>
> Gerd
>
>
> Am 25.02.21 um 02:50 schrieb H Gz:
> > Hello,
> >
> > I installed SQuirreL and tried to open a session with Actian Vector
> > v6.0, but it failed with an error.
> > SQuirreL version has two versions, 3.7 and 4.1,
> > In version 4.1,'Opening Session Error' and'Error occured during task
> > execution: null' errors occurred.
> > In version 3.7, opening the session was successful, but an error'Error
> > occured during task execution: null' occurred immediately after the
> > session was opened. And as soon as I tried to write the alphabet in an
> > open session, SQuirreL stopped (no menu clicks, no writing).
> >
> > SQuirreL interlocking attempts and considerations are as follows. I
> > checked all of the following and repeated the reinstallation dozens of
> > times.
> >
> > 1. Java settings
> > -Reinstall Java (jdk 1.8 and jre 1.8). Previously, only jre 1.8 was
> > installed
> > -Java environment variable modification. Setting jdk directory as user
> > variable and system variable.
> > Previously, only the jre directory was set as a variable, and only the
> > system variable was set.
> >
> > 2. Reinstall SQuirreL
> > -Proceed by installing version 3.7 and 4.1 respectively
> > -Try alternately installing the installation location to drive C and
> drive D
> > -Set the installation location address to contain only English.
> >
> > 3. iijdbc file (Actian Vector JDBC driver)
> > -Try using the iijdbc.jar file in version 4.3.7 and 4.4 respectively.
> >
> > 4. Find and delete the temp directory and Windows registry used when
> > installing SQuirreL and repeat the process
> >
> > How can I do?
> >
> > I also attached a log recorded when an error occurred.
> >
> > Thanks,
> > Wonki
> >
> >
> > _______________________________________________
> > Squirrel-sql-users mailing list
> > Squ...@li...
> > https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
> >
>

Hello  Wonki,
from looking at your squirrel-sql_4.1.log I guess SQuirreL can't access 
  its user folder C:\Users\user\.squirrel-sql\.

Perhaps there is a permission issue. You could check that or you may 
configure SQuirreL to use a different user folder.
This can be done by using the -userdir command line parameter.

Gerd

Am 25.02.21 um 02:50 schrieb H Gz:
> Hello,
> 
> I installed SQuirreL and tried to open a session with Actian Vector 
> v6.0, but it failed with an error.
> SQuirreL version has two versions, 3.7 and 4.1,
> In version 4.1,'Opening Session Error' and'Error occured during task 
> execution: null' errors occurred.
> In version 3.7, opening the session was successful, but an error'Error 
> occured during task execution: null' occurred immediately after the 
> session was opened. And as soon as I tried to write the alphabet in an 
> open session, SQuirreL stopped (no menu clicks, no writing).
> 
> SQuirreL interlocking attempts and considerations are as follows. I 
> checked all of the following and repeated the reinstallation dozens of 
> times.
> 
> 1. Java settings
> -Reinstall Java (jdk 1.8 and jre 1.8). Previously, only jre 1.8 was 
> installed
> -Java environment variable modification. Setting jdk directory as user 
> variable and system variable.
> Previously, only the jre directory was set as a variable, and only the 
> system variable was set.
> 
> 2. Reinstall SQuirreL
> -Proceed by installing version 3.7 and 4.1 respectively
> -Try alternately installing the installation location to drive C and drive D
> -Set the installation location address to contain only English.
> 
> 3. iijdbc file (Actian Vector JDBC driver)
> -Try using the iijdbc.jar file in version 4.3.7 and 4.4 respectively.
> 
> 4. Find and delete the temp directory and Windows registry used when 
> installing SQuirreL and repeat the process
> 
> How can I do?
> 
> I also attached a log recorded when an error occurred.
> 
> Thanks,
> Wonki
> 
> 
> _______________________________________________
> Squirrel-sql-users mailing list
> Squ...@li...
> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
> 

Hello,

I installed SQuirreL and tried to open a session with Actian Vector v6.0,
but it failed with an error.
SQuirreL version has two versions, 3.7 and 4.1,
In version 4.1,'Opening Session Error' and'Error occured during task
execution: null' errors occurred.
In version 3.7, opening the session was successful, but an error'Error
occured during task execution: null' occurred immediately after the session
was opened. And as soon as I tried to write the alphabet in an open
session, SQuirreL stopped (no menu clicks, no writing).

SQuirreL interlocking attempts and considerations are as follows. I checked
all of the following and repeated the reinstallation dozens of times.

1. Java settings
-Reinstall Java (jdk 1.8 and jre 1.8). Previously, only jre 1.8 was
installed
-Java environment variable modification. Setting jdk directory as user
variable and system variable.
Previously, only the jre directory was set as a variable, and only the
system variable was set.

2. Reinstall SQuirreL
-Proceed by installing version 3.7 and 4.1 respectively
-Try alternately installing the installation location to drive C and drive D
-Set the installation location address to contain only English.

3. iijdbc file (Actian Vector JDBC driver)
-Try using the iijdbc.jar file in version 4.3.7 and 4.4 respectively.

4. Find and delete the temp directory and Windows registry used when
installing SQuirreL and repeat the process

How can I do?

I also attached a log recorded when an error occurred.

Thanks,
Wonki

Issue fixed by putting the jdbc jar file just above the Download directory, i.e. in my user’s home directory ; then I could see it while trying and adding it
Eventually, Matt’s screen copy helped me

Thx all

> Le 14 févr. 2021 à 23:20, Claude Rousseau via Squirrel-sql-users <squ...@li...> a écrit :
> 
> Thx Gerd, but this is just what I’m doing and which does not work
> 
>> Le 14 févr. 2021 à 22:18, Gerd Wagner <ger...@t-... <mailto:ger...@t-...>> a écrit :
>> 
>> The best way to make a JDBC driver available in SQuirreL is to put the driver jar(s) some place outside of the SQuirreL installation directory. Then add the driver jar(s) to the "Extra class path" of SQuirreL's driver definition: Go to drivers list --> select a driver and choose "Modify driver" from the right mouse menu --> tab "Extra Class Path" --> button "Add".
>> 
>> Gerd
>> 
>> Am 14.02.21 um 20:45 schrieb Claude Rousseau via Squirrel-sql-users:
>>> I don’t understand how you can specify the specific jar file
>>>> Le 14 févr. 2021 à 18:57, Matt Ferreira <de...@ya... <mailto:de...@ya...> <mailto:de...@ya... <mailto:de...@ya...>>> a écrit :
>>>> 
>>>> That’s the issue. I’ve never had luck with specifying the path. I specify the specific jar file then do list drivers.
>>>> 
>>>> Sent from my mobile. Please excuse typos and brevity.
>>>> 
>>>>> On Feb 14, 2021, at 12:53 PM, Claude Rousseau <cla...@me... <mailto:cla...@me...> <mailto:cla...@me... <mailto:cla...@me...>>> wrote:
>>>>> 
>>>>> Hello
>>>>> 
>>>>> I’ve left the jar driver in my Downloads folder (I’d try to move it to desktop, but no change)
>>>>> 
>>>>> My Java version is:
>>>>> imac:~ cglr$ java -version
>>>>> java version "11.0.10" 2021-01-19 LTS
>>>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.10+8-LTS-162)
>>>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.10+8-LTS-162, mixed mode)
>>>>> 
>>>>> Which plugin are you talking about?
>>>>> I don’t understand what you mean about class path: I’ve added Download directory, then clicked on List drivers ; isn’t it the right way to, proceed?
>>>>> 
>>>>> Thx
>>>>> 
>>>>>> Le 14 févr. 2021 à 18:28, Matt F <de...@ya... <mailto:de...@ya...> <mailto:de...@ya... <mailto:de...@ya...>>> a écrit :
>>>>>> 
>>>>>> Hi Claude,
>>>>>> I tried to replicate this on my setup:
>>>>>> MacOs 11.1 (Big Sur)
>>>>>> I used the 4.1.0 release of Squirrel , I also installed the postgres plugin, standard and nothing else (side note, the latest snapshot 20210131_2217 failed to launch on my MacOS)
>>>>>> 
>>>>>> I downloaded the PostGres Jar, and kept it in Downloads. When I addded it and clicked "List Drivers" the following populated in my Class Name Drop Down :
>>>>>> 
>>>>>> org.postgresql.Driver
>>>>>> 
>>>>>> So I'm unable to reproduce. The questions I have for you are:
>>>>>> Did you install the Postgres Plugin?
>>>>>> Is the postgres JAR in a location that you have read/write access to (should only need read, but for the purposes of troubleshooting, would make it easier if you had full access) ?
>>>>>> What version of Java do you have :
>>>>>> mattferreira@Matts-Air ~ % java -version
>>>>>> java version "11.0.1" 2018-10-16 LTS
>>>>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
>>>>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
>>>>>> mattferreira@Matts-Air ~ %
>>>>>> 
>>>>>> 
>>>>>> Without knowing for sure - my guess is You don't have proper access to the postgres jar path and/or the extra class path isn't fully specified. For example, my class path is direct to the JAR file, not the directory the jar file is in (/Users/mattferreira/Downloads/postgressql-42.2.18.jar)
>>>>>> 
>>>>>> HTH
>>>>>> mattferreira@Matts-Air ~ % java -version
>>>>>> java version "11.0.1" 2018-10-16 LTS
>>>>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
>>>>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
>>>>>> mattferreira@Matts-Air ~ %
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> ==============================================
>>>>>> Matt Ferreira
>>>>>> de...@ya... <mailto:de...@ya...> <mailto:de...@ya... <mailto:de...@ya...>>
>>>>>> 
>>>>>> 
>>>>>> On Sunday, February 14, 2021, 06:58:13 AM EST, Claude Rousseau via Squirrel-sql-users <squ...@li... <mailto:squ...@li...> <mailto:squ...@li... <mailto:squ...@li...>>> wrote:
>>>>>> 
>>>>>> 
>>>>>> Hello
>>>>>> 
>>>>>> I’ve installed SquirrelSQL on my Mac (4.1.0)
>>>>>> I’ve downloaded last release of the jdbc driver for PostgreSQL (postgresql-42.2.18.jar)
>>>>>> When adding the driver, in additional class path folder, having selected the folder where this jar is and having clicked on « List drivers », nothing happens, as if Squirrel didn’t find my jar driver.
>>>>>> 
>>>>>> What can I do?
>>>>>> 
>>>>>> Thx
>>>>>> 
>>>>>> Claude Rousseau
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Squirrel-sql-users mailing list
>>>>>> Squ...@li... <mailto:Squ...@li...> <mailto:Squ...@li... <mailto:Squ...@li...>>
>>>>>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users> <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users>>
>>>>> 
>>>>> Claude Rousseau
>>>>> 
>>> Claude Rousseau
>>> _______________________________________________
>>> Squirrel-sql-users mailing list
>>> Squ...@li... <mailto:Squ...@li...>
>>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
> 
> Claude Rousseau
> 
> _______________________________________________
> Squirrel-sql-users mailing list
> Squ...@li...
> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users

Claude Rousseau

Thx Gerd, but this is just what I’m doing and which does not work

> Le 14 févr. 2021 à 22:18, Gerd Wagner <ger...@t-...> a écrit :
> 
> The best way to make a JDBC driver available in SQuirreL is to put the driver jar(s) some place outside of the SQuirreL installation directory. Then add the driver jar(s) to the "Extra class path" of SQuirreL's driver definition: Go to drivers list --> select a driver and choose "Modify driver" from the right mouse menu --> tab "Extra Class Path" --> button "Add".
> 
> Gerd
> 
> Am 14.02.21 um 20:45 schrieb Claude Rousseau via Squirrel-sql-users:
>> I don’t understand how you can specify the specific jar file
>>> Le 14 févr. 2021 à 18:57, Matt Ferreira <de...@ya... <mailto:de...@ya...>> a écrit :
>>> 
>>> That’s the issue. I’ve never had luck with specifying the path. I specify the specific jar file then do list drivers.
>>> 
>>> Sent from my mobile. Please excuse typos and brevity.
>>> 
>>>> On Feb 14, 2021, at 12:53 PM, Claude Rousseau <cla...@me... <mailto:cla...@me...>> wrote:
>>>> 
>>>> Hello
>>>> 
>>>> I’ve left the jar driver in my Downloads folder (I’d try to move it to desktop, but no change)
>>>> 
>>>> My Java version is:
>>>> imac:~ cglr$ java -version
>>>> java version "11.0.10" 2021-01-19 LTS
>>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.10+8-LTS-162)
>>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.10+8-LTS-162, mixed mode)
>>>> 
>>>> Which plugin are you talking about?
>>>> I don’t understand what you mean about class path: I’ve added Download directory, then clicked on List drivers ; isn’t it the right way to, proceed?
>>>> 
>>>> Thx
>>>> 
>>>>> Le 14 févr. 2021 à 18:28, Matt F <de...@ya... <mailto:de...@ya...>> a écrit :
>>>>> 
>>>>> Hi Claude,
>>>>> I tried to replicate this on my setup:
>>>>> MacOs 11.1 (Big Sur)
>>>>> I used the 4.1.0 release of Squirrel , I also installed the postgres plugin, standard and nothing else (side note, the latest snapshot 20210131_2217 failed to launch on my MacOS)
>>>>> 
>>>>> I downloaded the PostGres Jar, and kept it in Downloads. When I addded it and clicked "List Drivers" the following populated in my Class Name Drop Down :
>>>>> 
>>>>> org.postgresql.Driver
>>>>> 
>>>>> So I'm unable to reproduce. The questions I have for you are:
>>>>> Did you install the Postgres Plugin?
>>>>> Is the postgres JAR in a location that you have read/write access to (should only need read, but for the purposes of troubleshooting, would make it easier if you had full access) ?
>>>>> What version of Java do you have :
>>>>> mattferreira@Matts-Air ~ % java -version
>>>>> java version "11.0.1" 2018-10-16 LTS
>>>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
>>>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
>>>>> mattferreira@Matts-Air ~ %
>>>>> 
>>>>> 
>>>>> Without knowing for sure - my guess is You don't have proper access to the postgres jar path and/or the extra class path isn't fully specified. For example, my class path is direct to the JAR file, not the directory the jar file is in (/Users/mattferreira/Downloads/postgressql-42.2.18.jar)
>>>>> 
>>>>> HTH
>>>>> mattferreira@Matts-Air ~ % java -version
>>>>> java version "11.0.1" 2018-10-16 LTS
>>>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
>>>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
>>>>> mattferreira@Matts-Air ~ %
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> ==============================================
>>>>> Matt Ferreira
>>>>> de...@ya... <mailto:de...@ya...>
>>>>> 
>>>>> 
>>>>> On Sunday, February 14, 2021, 06:58:13 AM EST, Claude Rousseau via Squirrel-sql-users <squ...@li... <mailto:squ...@li...>> wrote:
>>>>> 
>>>>> 
>>>>> Hello
>>>>> 
>>>>> I’ve installed SquirrelSQL on my Mac (4.1.0)
>>>>> I’ve downloaded last release of the jdbc driver for PostgreSQL (postgresql-42.2.18.jar)
>>>>> When adding the driver, in additional class path folder, having selected the folder where this jar is and having clicked on « List drivers », nothing happens, as if Squirrel didn’t find my jar driver.
>>>>> 
>>>>> What can I do?
>>>>> 
>>>>> Thx
>>>>> 
>>>>> Claude Rousseau
>>>>> 
>>>>> _______________________________________________
>>>>> Squirrel-sql-users mailing list
>>>>> Squ...@li... <mailto:Squ...@li...>
>>>>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users>
>>>> 
>>>> Claude Rousseau
>>>> 
>> Claude Rousseau
>> _______________________________________________
>> Squirrel-sql-users mailing list
>> Squ...@li...
>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users

Claude Rousseau

The best way to make a JDBC driver available in SQuirreL is to put the 
driver jar(s) some place outside of the SQuirreL installation directory. 
Then add the driver jar(s) to the "Extra class path" of SQuirreL's 
driver definition: Go to drivers list --> select a driver and choose 
"Modify driver" from the right mouse menu --> tab "Extra Class Path" --> 
button "Add".

Gerd

Am 14.02.21 um 20:45 schrieb Claude Rousseau via Squirrel-sql-users:
> I don’t understand how you can specify the specific jar file
> 
>> Le 14 févr. 2021 à 18:57, Matt Ferreira <de...@ya... 
>> <mailto:de...@ya...>> a écrit :
>>
>> That’s the issue. I’ve never had luck with specifying the path. I 
>> specify the specific jar file then do list drivers.
>>
>> Sent from my mobile. Please excuse typos and brevity.
>>
>>> On Feb 14, 2021, at 12:53 PM, Claude Rousseau <cla...@me... 
>>> <mailto:cla...@me...>> wrote:
>>>
>>> Hello
>>>
>>> I’ve left the jar driver in my Downloads folder (I’d try to move it 
>>> to desktop, but no change)
>>>
>>> My Java version is:
>>> imac:~ cglr$ java -version
>>> java version "11.0.10" 2021-01-19 LTS
>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.10+8-LTS-162)
>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.10+8-LTS-162, 
>>> mixed mode)
>>>
>>> Which plugin are you talking about?
>>> I don’t understand what you mean about class path: I’ve added 
>>> Download directory, then clicked on List drivers ; isn’t it the right 
>>> way to, proceed?
>>>
>>> Thx
>>>
>>>> Le 14 févr. 2021 à 18:28, Matt F <de...@ya... 
>>>> <mailto:de...@ya...>> a écrit :
>>>>
>>>> Hi Claude,
>>>> I tried to replicate this on my setup:
>>>> MacOs 11.1 (Big Sur)
>>>> I used the 4.1.0 release of Squirrel , I also installed the postgres 
>>>> plugin, standard and nothing else (side note, the latest snapshot 
>>>> 20210131_2217 failed to launch on my MacOS)
>>>>
>>>> I downloaded the PostGres Jar, and kept it in Downloads. When I 
>>>> addded it and clicked "List Drivers" the following populated in my 
>>>> Class Name Drop Down :
>>>>
>>>> org.postgresql.Driver
>>>>
>>>> So I'm unable to reproduce. The questions I have for you are:
>>>> Did you install the Postgres Plugin?
>>>> Is the postgres JAR in a location that you have read/write access to 
>>>> (should only need read, but for the purposes of troubleshooting, 
>>>> would make it easier if you had full access) ?
>>>> What version of Java do you have :
>>>> mattferreira@Matts-Air ~ % java -version
>>>> java version "11.0.1" 2018-10-16 LTS
>>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
>>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
>>>> mattferreira@Matts-Air ~ %
>>>>
>>>>
>>>> Without knowing for sure - my guess is You don't have proper access 
>>>> to the postgres jar path and/or the extra class path isn't fully 
>>>> specified. For example, my class path is direct to the JAR file, not 
>>>> the directory the jar file is in 
>>>> (/Users/mattferreira/Downloads/postgressql-42.2.18.jar)
>>>>
>>>> HTH
>>>> mattferreira@Matts-Air ~ % java -version
>>>> java version "11.0.1" 2018-10-16 LTS
>>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
>>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
>>>> mattferreira@Matts-Air ~ %
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ==============================================
>>>> Matt Ferreira
>>>> de...@ya... <mailto:de...@ya...>
>>>>
>>>>
>>>> On Sunday, February 14, 2021, 06:58:13 AM EST, Claude Rousseau via 
>>>> Squirrel-sql-users <squ...@li... 
>>>> <mailto:squ...@li...>> wrote:
>>>>
>>>>
>>>> Hello
>>>>
>>>> I’ve installed SquirrelSQL on my Mac (4.1.0)
>>>> I’ve downloaded last release of the jdbc driver for PostgreSQL 
>>>> (postgresql-42.2.18.jar)
>>>> When adding the driver, in additional class path folder, having 
>>>> selected the folder where this jar is and having clicked on « List 
>>>> drivers », nothing happens, as if Squirrel didn’t find my jar driver.
>>>>
>>>> What can I do?
>>>>
>>>> Thx
>>>>
>>>> Claude Rousseau
>>>>
>>>> _______________________________________________
>>>> Squirrel-sql-users mailing list
>>>> Squ...@li... 
>>>> <mailto:Squ...@li...>
>>>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users 
>>>> <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users>
>>>
>>> Claude Rousseau
>>>
> 
> Claude Rousseau
> 
> 
> 
> _______________________________________________
> Squirrel-sql-users mailing list
> Squ...@li...
> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
> 

I don’t understand how you can specify the specific jar file

> Le 14 févr. 2021 à 18:57, Matt Ferreira <de...@ya...> a écrit :
> 
> That’s the issue. I’ve never had luck with specifying the path. I specify the specific jar file then do list drivers. 
> 
> Sent from my mobile. Please excuse typos and brevity. 
> 
>> On Feb 14, 2021, at 12:53 PM, Claude Rousseau <cla...@me...> wrote:
>> 
>> Hello
>> 
>> I’ve left the jar driver in my Downloads folder (I’d try to move it to desktop, but no change)
>> 
>> My Java version is:
>> imac:~ cglr$ java -version
>> java version "11.0.10" 2021-01-19 LTS
>> Java(TM) SE Runtime Environment 18.9 (build 11.0.10+8-LTS-162)
>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.10+8-LTS-162, mixed mode)
>> 
>> Which plugin are you talking about?
>> I don’t understand what you mean about class path: I’ve added Download directory, then clicked on List drivers ; isn’t it the right way to, proceed?
>> 
>> Thx
>> 
>>> Le 14 févr. 2021 à 18:28, Matt F <de...@ya... <mailto:de...@ya...>> a écrit :
>>> 
>>> Hi Claude,
>>> I tried to replicate this on my setup:
>>> MacOs 11.1 (Big Sur) 
>>> I used the 4.1.0 release of Squirrel , I also installed the postgres plugin, standard and nothing else (side note, the latest snapshot 20210131_2217 failed to launch on my MacOS) 
>>> 
>>> I downloaded the PostGres Jar, and kept it in Downloads. When I addded it and clicked "List Drivers" the following populated in my Class Name Drop Down :
>>> 
>>> org.postgresql.Driver
>>> 
>>> So I'm unable to reproduce. The questions I have for you are:
>>> Did you install the Postgres Plugin?
>>> Is the postgres JAR in a location that you have read/write access to (should only need read, but for the purposes of troubleshooting, would make it easier if you had full access) ?
>>> What version of Java do you have :
>>> mattferreira@Matts-Air ~ % java -version
>>> java version "11.0.1" 2018-10-16 LTS
>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
>>> mattferreira@Matts-Air ~ % 
>>> 
>>> 
>>> Without knowing for sure - my guess is You don't have proper access to the postgres jar path and/or the extra class path isn't fully specified. For example, my class path is direct to the JAR file, not the directory the jar file is in (/Users/mattferreira/Downloads/postgressql-42.2.18.jar) 
>>> 
>>> HTH
>>>  
>>> mattferreira@Matts-Air ~ % java -version
>>> java version "11.0.1" 2018-10-16 LTS
>>> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
>>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
>>> mattferreira@Matts-Air ~ % 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> ==============================================
>>> Matt Ferreira
>>> de...@ya... <mailto:de...@ya...>
>>> 
>>> 
>>> On Sunday, February 14, 2021, 06:58:13 AM EST, Claude Rousseau via Squirrel-sql-users <squ...@li... <mailto:squ...@li...>> wrote:
>>> 
>>> 
>>> Hello
>>> 
>>> I’ve installed SquirrelSQL on my Mac (4.1.0)
>>> I’ve downloaded last release of the jdbc driver for PostgreSQL (postgresql-42.2.18.jar)
>>> When adding the driver, in additional class path folder, having selected the folder where this jar is and having clicked on « List drivers », nothing happens, as if Squirrel didn’t find my jar driver.
>>> 
>>> What can I do?
>>> 
>>> Thx
>>> 
>>> Claude Rousseau
>>> 
>>> _______________________________________________
>>> Squirrel-sql-users mailing list
>>> Squ...@li... <mailto:Squ...@li...>
>>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users>
>> 
>> Claude Rousseau
>> 

Claude Rousseau

That’s the issue. I’ve never had luck with specifying the path. I specify the specific jar file then do list drivers. 

Sent from my mobile. Please excuse typos and brevity. 

> On Feb 14, 2021, at 12:53 PM, Claude Rousseau <cla...@me...> wrote:
> 
> Hello
> 
> I’ve left the jar driver in my Downloads folder (I’d try to move it to desktop, but no change)
> 
> My Java version is:
> imac:~ cglr$ java -version
> java version "11.0.10" 2021-01-19 LTS
> Java(TM) SE Runtime Environment 18.9 (build 11.0.10+8-LTS-162)
> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.10+8-LTS-162, mixed mode)
> 
> Which plugin are you talking about?
> I don’t understand what you mean about class path: I’ve added Download directory, then clicked on List drivers ; isn’t it the right way to, proceed?
> 
> Thx
> 
>> Le 14 févr. 2021 à 18:28, Matt F <de...@ya...> a écrit :
>> 
>> Hi Claude,
>> I tried to replicate this on my setup:
>> MacOs 11.1 (Big Sur) 
>> I used the 4.1.0 release of Squirrel , I also installed the postgres plugin, standard and nothing else (side note, the latest snapshot 20210131_2217 failed to launch on my MacOS) 
>> 
>> I downloaded the PostGres Jar, and kept it in Downloads. When I addded it and clicked "List Drivers" the following populated in my Class Name Drop Down :
>> 
>> org.postgresql.Driver
>> 
>> So I'm unable to reproduce. The questions I have for you are:
>> Did you install the Postgres Plugin?
>> Is the postgres JAR in a location that you have read/write access to (should only need read, but for the purposes of troubleshooting, would make it easier if you had full access) ?
>> What version of Java do you have :
>> mattferreira@Matts-Air ~ % java -version
>> java version "11.0.1" 2018-10-16 LTS
>> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
>> mattferreira@Matts-Air ~ % 
>> 
>> 
>> Without knowing for sure - my guess is You don't have proper access to the postgres jar path and/or the extra class path isn't fully specified. For example, my class path is direct to the JAR file, not the directory the jar file is in (/Users/mattferreira/Downloads/postgressql-42.2.18.jar) 
>> 
>> HTH
>>  
>> mattferreira@Matts-Air ~ % java -version
>> java version "11.0.1" 2018-10-16 LTS
>> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
>> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
>> mattferreira@Matts-Air ~ % 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> ==============================================
>> Matt Ferreira
>> de...@ya...
>> 
>> 
>> On Sunday, February 14, 2021, 06:58:13 AM EST, Claude Rousseau via Squirrel-sql-users <squ...@li...> wrote:
>> 
>> 
>> Hello
>> 
>> I’ve installed SquirrelSQL on my Mac (4.1.0)
>> I’ve downloaded last release of the jdbc driver for PostgreSQL (postgresql-42.2.18.jar)
>> When adding the driver, in additional class path folder, having selected the folder where this jar is and having clicked on « List drivers », nothing happens, as if Squirrel didn’t find my jar driver.
>> 
>> What can I do?
>> 
>> Thx
>> 
>> Claude Rousseau
>> 
>> _______________________________________________
>> Squirrel-sql-users mailing list
>> Squ...@li...
>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
> 
> Claude Rousseau
> 

Hello

I’ve left the jar driver in my Downloads folder (I’d try to move it to desktop, but no change)

My Java version is:
imac:~ cglr$ java -version
java version "11.0.10" 2021-01-19 LTS
Java(TM) SE Runtime Environment 18.9 (build 11.0.10+8-LTS-162)
Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.10+8-LTS-162, mixed mode)

Which plugin are you talking about?
I don’t understand what you mean about class path: I’ve added Download directory, then clicked on List drivers ; isn’t it the right way to, proceed?

Thx

> Le 14 févr. 2021 à 18:28, Matt F <de...@ya...> a écrit :
> 
> Hi Claude,
> I tried to replicate this on my setup:
> MacOs 11.1 (Big Sur) 
> I used the 4.1.0 release of Squirrel , I also installed the postgres plugin, standard and nothing else (side note, the latest snapshot 20210131_2217 failed to launch on my MacOS) 
> 
> I downloaded the PostGres Jar, and kept it in Downloads. When I addded it and clicked "List Drivers" the following populated in my Class Name Drop Down :
> 
> org.postgresql.Driver
> 
> So I'm unable to reproduce. The questions I have for you are:
> Did you install the Postgres Plugin?
> Is the postgres JAR in a location that you have read/write access to (should only need read, but for the purposes of troubleshooting, would make it easier if you had full access) ?
> What version of Java do you have :
> mattferreira@Matts-Air ~ % java -version
> java version "11.0.1" 2018-10-16 LTS
> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
> mattferreira@Matts-Air ~ % 
> 
> 
> Without knowing for sure - my guess is You don't have proper access to the postgres jar path and/or the extra class path isn't fully specified. For example, my class path is direct to the JAR file, not the directory the jar file is in (/Users/mattferreira/Downloads/postgressql-42.2.18.jar) 
> 
> HTH
>  
> mattferreira@Matts-Air ~ % java -version
> java version "11.0.1" 2018-10-16 LTS
> Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)
> Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)
> mattferreira@Matts-Air ~ % 
> 
> 
> 
> 
> 
> 
> 
> ==============================================
> Matt Ferreira
> de...@ya...
> 
> 
> On Sunday, February 14, 2021, 06:58:13 AM EST, Claude Rousseau via Squirrel-sql-users <squ...@li...> wrote:
> 
> 
> Hello
> 
> I’ve installed SquirrelSQL on my Mac (4.1.0)
> I’ve downloaded last release of the jdbc driver for PostgreSQL (postgresql-42.2.18.jar)
> When adding the driver, in additional class path folder, having selected the folder where this jar is and having clicked on « List drivers », nothing happens, as if Squirrel didn’t find my jar driver.
> 
> What can I do?
> 
> Thx
> 
> Claude Rousseau
> 
> _______________________________________________
> Squirrel-sql-users mailing list
> Squ...@li... <mailto:Squ...@li...>
> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users <https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users>

Claude Rousseau

Hi Claude,I tried to replicate this on my setup:MacOs 11.1 (Big Sur) I used the 4.1.0 release of Squirrel , I also installed the postgres plugin, standard and nothing else (side note, the latest snapshot 20210131_2217 failed to launch on my MacOS) 
I downloaded the PostGres Jar, and kept it in Downloads. When I addded it and clicked "List Drivers" the following populated in my Class Name Drop Down :
org.postgresql.Driver

So I'm unable to reproduce. The questions I have for you are:Did you install the Postgres Plugin?Is the postgres JAR in a location that you have read/write access to (should only need read, but for the purposes of troubleshooting, would make it easier if you had full access) ?What version of Java do you have :
mattferreira@Matts-Air ~ % java -version

java version "11.0.1" 2018-10-16 LTS

Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)

Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)

mattferreira@Matts-Air ~ % 

Without knowing for sure - my guess is You don't have proper access to the postgres jar path and/or the extra class path isn't fully specified. For example, my class path is direct to the JAR file, not the directory the jar file is in (/Users/mattferreira/Downloads/postgressql-42.2.18.jar) 
HTH 
mattferreira@Matts-Air ~ % java -version

java version "11.0.1" 2018-10-16 LTS

Java(TM) SE Runtime Environment 18.9 (build 11.0.1+13-LTS)

Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.1+13-LTS, mixed mode)

mattferreira@Matts-Air ~ % 

==============================================Matt Ferreira
de...@ya...

    On Sunday, February 14, 2021, 06:58:13 AM EST, Claude Rousseau via Squirrel-sql-users <squ...@li...> wrote:  

 Hello
I’ve installed SquirrelSQL on my Mac (4.1.0)I’ve downloaded last release of the jdbc driver for PostgreSQL (postgresql-42.2.18.jar)When adding the driver, in additional class path folder, having selected the folder where this jar is and having clicked on « List drivers », nothing happens, as if Squirrel didn’t find my jar driver.
What can I do?
Thx
Claude Rousseau
_______________________________________________
Squirrel-sql-users mailing list
Squ...@li...
https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users

Hello

I’ve installed SquirrelSQL on my Mac (4.1.0)
I’ve downloaded last release of the jdbc driver for PostgreSQL (postgresql-42.2.18.jar)
When adding the driver, in additional class path folder, having selected the folder where this jar is and having clicked on « List drivers », nothing happens, as if Squirrel didn’t find my jar driver.

What can I do?

Thx

Claude Rousseau

Does plain-text connection work?

On 2021-01-15 08:52 AM, Duane Howard wrote:
> OS: Linux Mint V20
> DB: MySQL Server V8
>
> I have been trying to connect Squirrel to a MySQL database and get the 
> following error:
>
> Unexpected Error occurred attempting to open an SQL connection.
> class javax.net.ssl.SSLHandshakeException: Received fatal alert:  
> protocol_version
>
> Based on the error, I have limited MySQL protocol from TLSv1.3 to 1.2, 
> to 1.1 and to 1.0 and tried to connect Squirrel at each level to no avail.
>
> Both MySQL and Squirrel are installed on the localhost. I have 
> downloaded and am using the latest MySQL Connector/J driver. I can 
> connect to the DB with MySQL Workbench and phpMyAdmin.
>
> Has anyone been successful in getting these two to play together?
>
> Thanks in advance for any assistance provided.
>
>
>
>
> _______________________________________________
> Squirrel-sql-users mailing list
> Squ...@li...
> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users

OS: Linux Mint V20
DB: MySQL Server V8

I have been trying to connect Squirrel to a MySQL database and get the
following error:

Unexpected Error occurred attempting to open an SQL connection.
class javax.net.ssl.SSLHandshakeException: Received fatal alert:
protocol_version

Based on the error, I have limited MySQL protocol from TLSv1.3 to 1.2, to
1.1 and to 1.0 and tried to connect Squirrel at each level to no avail.

Both MySQL and Squirrel are installed on the localhost. I have downloaded
and am using the latest MySQL Connector/J driver. I can connect to the DB
with MySQL Workbench and phpMyAdmin.

Has anyone been successful in getting these two to play together?

Thanks in advance for any assistance provided.

Regarding this topic, Emiliano commented about the reduced functionality in
Mac OSX. I am encountering the same issue, and I believe it is linked to
the absence of plugins.

I can explore the package and see that all plugins are there, but they
don't seem to be active. If I go to "Plugins" from the menu, nothing is
enabled.

I used the Mac installer, and I am running SQuirreL Snapshot 20201213,
after trying 4.1.0 without success. I am on Mac OSC Catalina.

Does anyone have any ideas on how to enable the full functionality of
SQuirreL on a Mac?

The "Session Scripts" plugin could do it for you.  It adds a "Session 
Scripts..." item to the "Plugins" main menu.  You should have selected 
the plugin during the SQuirreL SQL installation.

– Stanimir

Fri, 20 Nov 2020 03:16:56 +0000 (UTC), /Alarcón Vladimir/:

> Maybe there's another way of resolving this, but I haven't fonud it: 
> I need to set the default schema for an Oracle connection; otherwise, 
> I need to type the schema on every query I write. In my use case I'm 
> connecting to an Oracle database with a read-only user (production 
> db), and this user does not correspond to the schema where the data 
> is stored.
> 
> So far, I can see three options:
> 
> 1. Type the schema on every query. I really don't want to do this.
> 
> 2. Run the SQL statement: "ALTER SESSION SET CURRENT_SCHEMA 
> prod-schema", every time I connect or reconnect.
> 
> 3. Stackoverflow says I can create a trigger on my user schema that 
> automatically runs option #2 when connecting. Unfortunately I can't 
> do this since I have read-only access.
> 
> I was wondering Squirrel SQL's Session Properties could be enhanced 
> with an "Initial SQL Statement" provided by the user. I think Spring 
> implements this strategy at startup.
> 
> Maybe there's a better way I haven't found yet. Alternatively, if 
> someone tells me where to fix it, I could fork Squirrel SQL and later 
> submit the change.

-- 

Hi,

Maybe there's another way of resolving this, but I haven't fonud it: I need to set the default schema for an Oracle connection; otherwise, I need to type the schema on every query I write. In my use case I'm connecting to an Oracle database with a read-only user (production db), and this user does not correspond to the schema where the data is stored.

So far, I can see three options:

1. Type the schema on every query. I really don't want to do this.

2. Run the SQL statement: "ALTER SESSION SET CURRENT_SCHEMA prod-schema", every time I connect or reconnect.

3. Stackoverflow says I can create a trigger on my user schema that automatically runs option #2 when connecting. Unfortunately I can't do this since I have read-only access.

I was wondering Squirrel SQL's Session Properties could be enhanced with an "Initial SQL Statement" provided by the user. I think Spring implements this strategy at startup.

Maybe there's a better way I haven't found yet. Alternatively, if someone tells me where to fix it, I could fork Squirrel SQL and later submit the change.

Thanks in advance,
Vlad

Am 11.11.20 um 04:06 schrieb info:
> Gerd:
> 
> After playing with the imported aliases more, I realized that they did 
> not drop into the list because it was not in Tree mode. Once I switched, 
> they dropped.
> The simplest solution is probably to switch the list into Tree mode 
> before accepting dropped aliases.
> 
> If instead of fixing drag-and-drop you could look into the reason why 
> aliases are being accessed during the shutdown even if they were not 
> connected, it would help immensely! That remote iSeries that is sitting 
> across the Atlantic is killing me.

The only thing I know of and that SQuirreL is supposed to do with 
Aliases on application close is to store their definitions in
<userdir>/SQLAliases23.xml and <userdir>/SQLAliases23_treeStructure.xml.

There are a few things more you may try:
1. Set SQuirrel's -detectEDT command line parameter, open and close 
SQuirreL and post the logs again. (In case you don't want to send big 
log files, delete existing log files before.)
2. Execute JDKs command line tool jstack on SQuirreL's PID when the hang 
occurs and post the output. Best would be if you could execute jstack 
several times and post the output of each time.
3. Use a profiling tool to analyze what's happening during closing 
SQuirreL. Examples for such tools are:
- JDK's jvisualvm
- https://www.yourkit.com/

Gerd

> 
> Thanks!
> Al
> 
> On 2020-11-10 04:18 PM, Gerd Wagner wrote:
>>> dragging them back to the now emply alias list does not work. They
>>> drag but do not drop. What am I missing?
>>
>> This is a bug and I'll fix it as soon as possible.
>>
>> As a workaround you may create a single Alias folder in the empty 
>> Alias list. Then drag and drop will work.
>>
>> Gerd
>>
>>
>> Am 10.11.20 um 19:45 schrieb info:
>>> Once I deleted all aliases, the start time returned to normal 1-2 
>>> seconds and shutdown time to instant.
>>> Now I am almost positive that it was a remote iSeries alias that 
>>> slowed everything down.
>>> But there I hit a roadblock. I am not able to import my aliases back. 
>>> I load the ZIP file, it shows all of my aliases in the import window, 
>>> but dragging them back to the now emply alias list does not work. 
>>> They drag but do not drop. What am I missing? I tried the Update 
>>> button but it did not do anything either. Will I have to recreate all 
>>> aliases from scratch?
>>>
>>> On 2020-11-09 05:06 PM, info wrote:
>>>> Exported the aliases and tried deleting MySQL aliases (I have 2x). 
>>>> Beforehand I checked if any of my aliases had connect on startup. 
>>>> None had.
>>>> Anyhow, this changed nothing at all.
>>>> Yes, I should be able to build Squirrel. I used to step through the 
>>>> code of Ms Sql plugin a few years back in Netbeans.
>>>>
>>>> On 2020-11-09 04:18 PM, Gerd Wagner wrote:
>>>>> It's the best guess the logs brought me to.
>>>>> I could only be quite sure if I'd be able to reproduce your problem 
>>>>> which I still can't.
>>>>>
>>>>> If you could build and debug SQuirreL on your system this would be 
>>>>> a fair chance to find out what the problem is. For some information 
>>>>> on this see
>>>>> http://www.squirrelsql.org/index.php?page=programing
>>>>>
>>>>> Gerd
>>>>>
>>>>> Am 08.11.20 um 23:27 schrieb info:
>>>>>> Does this explain the 30 second delay before the shutdown?
>>>>>> I do have 2x MySQL aliases, and when I click on them, each 
>>>>>> connects almost instantaneously. They lead to a server on my LAN. 
>>>>>> However I do not recall ever checking off the connect at startup 
>>>>>> option since started using Squirrel many years ago. I will double 
>>>>>> check if any of them have it.
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Squirrel-sql-users mailing list
>>>> Squ...@li...
>>>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Squirrel-sql-users mailing list
>>> Squ...@li...
>>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>>
> 
> 
> 
> 
> _______________________________________________
> Squirrel-sql-users mailing list
> Squ...@li...
> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users

Gerd:

After playing with the imported aliases more, I realized that they did 
not drop into the list because it was not in Tree mode. Once I switched, 
they dropped.
The simplest solution is probably to switch the list into Tree mode 
before accepting dropped aliases.

If instead of fixing drag-and-drop you could look into the reason why 
aliases are being accessed during the shutdown even if they were not 
connected, it would help immensely! That remote iSeries that is sitting 
across the Atlantic is killing me.

Thanks!
Al

On 2020-11-10 04:18 PM, Gerd Wagner wrote:
>> dragging them back to the now emply alias list does not work. They
>> drag but do not drop. What am I missing?
>
> This is a bug and I'll fix it as soon as possible.
>
> As a workaround you may create a single Alias folder in the empty 
> Alias list. Then drag and drop will work.
>
> Gerd
>
>
> Am 10.11.20 um 19:45 schrieb info:
>> Once I deleted all aliases, the start time returned to normal 1-2 
>> seconds and shutdown time to instant.
>> Now I am almost positive that it was a remote iSeries alias that 
>> slowed everything down.
>> But there I hit a roadblock. I am not able to import my aliases back. 
>> I load the ZIP file, it shows all of my aliases in the import window, 
>> but dragging them back to the now emply alias list does not work. 
>> They drag but do not drop. What am I missing? I tried the Update 
>> button but it did not do anything either. Will I have to recreate all 
>> aliases from scratch?
>>
>> On 2020-11-09 05:06 PM, info wrote:
>>> Exported the aliases and tried deleting MySQL aliases (I have 2x). 
>>> Beforehand I checked if any of my aliases had connect on startup. 
>>> None had.
>>> Anyhow, this changed nothing at all.
>>> Yes, I should be able to build Squirrel. I used to step through the 
>>> code of Ms Sql plugin a few years back in Netbeans.
>>>
>>> On 2020-11-09 04:18 PM, Gerd Wagner wrote:
>>>> It's the best guess the logs brought me to.
>>>> I could only be quite sure if I'd be able to reproduce your problem 
>>>> which I still can't.
>>>>
>>>> If you could build and debug SQuirreL on your system this would be 
>>>> a fair chance to find out what the problem is. For some information 
>>>> on this see
>>>> http://www.squirrelsql.org/index.php?page=programing
>>>>
>>>> Gerd
>>>>
>>>> Am 08.11.20 um 23:27 schrieb info:
>>>>> Does this explain the 30 second delay before the shutdown?
>>>>> I do have 2x MySQL aliases, and when I click on them, each 
>>>>> connects almost instantaneously. They lead to a server on my LAN. 
>>>>> However I do not recall ever checking off the connect at startup 
>>>>> option since started using Squirrel many years ago. I will double 
>>>>> check if any of them have it.
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Squirrel-sql-users mailing list
>>> Squ...@li...
>>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>>>
>>
>>
>>
>>
>> _______________________________________________
>> Squirrel-sql-users mailing list
>> Squ...@li...
>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>

In fact the fix is available here:
https://sourceforge.net/projects/squirrel-sql/files/3-snapshots/snapshot-20201110_2236/

Gerd

Am 10.11.20 um 22:18 schrieb Gerd Wagner:
>> dragging them back to the now emply alias list does not work. They
>> drag but do not drop. What am I missing?
> 
> This is a bug and I'll fix it as soon as possible.
> 
> As a workaround you may create a single Alias folder in the empty Alias 
> list. Then drag and drop will work.
> 
> Gerd
> 
> 
> Am 10.11.20 um 19:45 schrieb info:
>> Once I deleted all aliases, the start time returned to normal 1-2 
>> seconds and shutdown time to instant.
>> Now I am almost positive that it was a remote iSeries alias that 
>> slowed everything down.
>> But there I hit a roadblock. I am not able to import my aliases back. 
>> I load the ZIP file, it shows all of my aliases in the import window, 
>> but dragging them back to the now emply alias list does not work. They 
>> drag but do not drop. What am I missing? I tried the Update button but 
>> it did not do anything either. Will I have to recreate all aliases 
>> from scratch?
>>
>> On 2020-11-09 05:06 PM, info wrote:
>>> Exported the aliases and tried deleting MySQL aliases (I have 2x). 
>>> Beforehand I checked if any of my aliases had connect on startup. 
>>> None had.
>>> Anyhow, this changed nothing at all.
>>> Yes, I should be able to build Squirrel. I used to step through the 
>>> code of Ms Sql plugin a few years back in Netbeans.
>>>
>>> On 2020-11-09 04:18 PM, Gerd Wagner wrote:
>>>> It's the best guess the logs brought me to.
>>>> I could only be quite sure if I'd be able to reproduce your problem 
>>>> which I still can't.
>>>>
>>>> If you could build and debug SQuirreL on your system this would be a 
>>>> fair chance to find out what the problem is. For some information on 
>>>> this see
>>>> http://www.squirrelsql.org/index.php?page=programing
>>>>
>>>> Gerd
>>>>
>>>> Am 08.11.20 um 23:27 schrieb info:
>>>>> Does this explain the 30 second delay before the shutdown?
>>>>> I do have 2x MySQL aliases, and when I click on them, each connects 
>>>>> almost instantaneously. They lead to a server on my LAN. However I 
>>>>> do not recall ever checking off the connect at startup option since 
>>>>> started using Squirrel many years ago. I will double check if any 
>>>>> of them have it.
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Squirrel-sql-users mailing list
>>> Squ...@li...
>>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>>>
>>
>>
>>
>>
>> _______________________________________________
>> Squirrel-sql-users mailing list
>> Squ...@li...
>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
> 
> 
> _______________________________________________
> Squirrel-sql-users mailing list
> Squ...@li...
> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users

> dragging them back to the now emply alias list does not work. They
> drag but do not drop. What am I missing?

This is a bug and I'll fix it as soon as possible.

As a workaround you may create a single Alias folder in the empty Alias 
list. Then drag and drop will work.

Gerd

Am 10.11.20 um 19:45 schrieb info:
> Once I deleted all aliases, the start time returned to normal 1-2 
> seconds and shutdown time to instant.
> Now I am almost positive that it was a remote iSeries alias that slowed 
> everything down.
> But there I hit a roadblock. I am not able to import my aliases back. I 
> load the ZIP file, it shows all of my aliases in the import window, but 
> dragging them back to the now emply alias list does not work. They drag 
> but do not drop. What am I missing? I tried the Update button but it did 
> not do anything either. Will I have to recreate all aliases from scratch?
> 
> On 2020-11-09 05:06 PM, info wrote:
>> Exported the aliases and tried deleting MySQL aliases (I have 2x). 
>> Beforehand I checked if any of my aliases had connect on startup. None 
>> had.
>> Anyhow, this changed nothing at all.
>> Yes, I should be able to build Squirrel. I used to step through the 
>> code of Ms Sql plugin a few years back in Netbeans.
>>
>> On 2020-11-09 04:18 PM, Gerd Wagner wrote:
>>> It's the best guess the logs brought me to.
>>> I could only be quite sure if I'd be able to reproduce your problem 
>>> which I still can't.
>>>
>>> If you could build and debug SQuirreL on your system this would be a 
>>> fair chance to find out what the problem is. For some information on 
>>> this see
>>> http://www.squirrelsql.org/index.php?page=programing
>>>
>>> Gerd
>>>
>>> Am 08.11.20 um 23:27 schrieb info:
>>>> Does this explain the 30 second delay before the shutdown?
>>>> I do have 2x MySQL aliases, and when I click on them, each connects 
>>>> almost instantaneously. They lead to a server on my LAN. However I 
>>>> do not recall ever checking off the connect at startup option since 
>>>> started using Squirrel many years ago. I will double check if any of 
>>>> them have it.
>>
>>
>>
>>
>> _______________________________________________
>> Squirrel-sql-users mailing list
>> Squ...@li...
>> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>>
> 
> 
> 
> 
> _______________________________________________
> Squirrel-sql-users mailing list
> Squ...@li...
> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users

It would make sense if there was a need for Squirrel to perform some 
very important actions on shutdown, but I cannot see any need for that. 
What is it that Squirrel must access an iSeries alias for when a user 
wishes to exit from the program that is so important that it is worth 
waiting for 30 seconds for? Keeping in mind that I am not even connected 
to iSeries most of the time! None of my aliases is configured to connect 
on startup; therefore, there should be no attempts to connect on 
startup. I am totally baffled by this issue that has no reason to occur.

On 2020-11-10 02:10 PM, Erwan Duroselle wrote:
> Hi,
> When I was working with squirrel on iseries I had the same slow 
> startup problem.
> I had attributed it to the large number of libraries and very large 
> number of files (tables) in each Library that squirrel has to scan on 
> Startup.
> IIRC I mitigated the problem by loading only a small number of 
> libraries (schemas) and not caching them in Squirrel.
>
> HTH
> Erwan
>
>
>
> Le mar. 10 nov. 2020 à 19:47, info <in...@dr... 
> <mailto:in...@dr...>> a écrit :
>
>     Once I deleted all aliases, the start time returned to normal 1-2
>     seconds and shutdown time to instant.
>     Now I am almost positive that it was a remote iSeries alias that
>     slowed
>     everything down.
>     But there I hit a roadblock. I am not able to import my aliases
>     back. I
>     load the ZIP file, it shows all of my aliases in the import
>     window, but
>     dragging them back to the now emply alias list does not work. They
>     drag
>     but do not drop. What am I missing? I tried the Update button but
>     it did
>     not do anything either. Will I have to recreate all aliases from
>     scratch?
>
>     On 2020-11-09 05:06 PM, info wrote:
>     > Exported the aliases and tried deleting MySQL aliases (I have 2x).
>     > Beforehand I checked if any of my aliases had connect on
>     startup. None
>     > had.
>     > Anyhow, this changed nothing at all.
>     > Yes, I should be able to build Squirrel. I used to step through the
>     > code of Ms Sql plugin a few years back in Netbeans.
>     >
>     > On 2020-11-09 04:18 PM, Gerd Wagner wrote:
>     >> It's the best guess the logs brought me to.
>     >> I could only be quite sure if I'd be able to reproduce your
>     problem
>     >> which I still can't.
>     >>
>     >> If you could build and debug SQuirreL on your system this would
>     be a
>     >> fair chance to find out what the problem is. For some
>     information on
>     >> this see
>     >> http://www.squirrelsql.org/index.php?page=programing
>     >>
>     >> Gerd
>     >>
>     >> Am 08.11.20 um 23:27 schrieb info:
>     >>> Does this explain the 30 second delay before the shutdown?
>     >>> I do have 2x MySQL aliases, and when I click on them, each
>     connects
>     >>> almost instantaneously. They lead to a server on my LAN.
>     However I
>     >>> do not recall ever checking off the connect at startup option
>     since
>     >>> started using Squirrel many years ago. I will double check if
>     any of
>     >>> them have it.
>     >
>     >
>     >
>     >
>     > _______________________________________________
>     > Squirrel-sql-users mailing list
>     > Squ...@li...
>     <mailto:Squ...@li...>
>     > https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>     >
>
>
>
>
>     _______________________________________________
>     Squirrel-sql-users mailing list
>     Squ...@li...
>     <mailto:Squ...@li...>
>     https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
>

2001	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct	Nov (7)	Dec (4)
2002	Jan (9)	Feb (4)	Mar (20)	Apr (10)	May (5)	Jun (2)	Jul (10)	Aug (4)	Sep (15)	Oct (5)	Nov (8)	Dec (2)
2003	Jan (11)	Feb (5)	Mar (10)	Apr (20)	May (24)	Jun (13)	Jul (6)	Aug (5)	Sep (10)	Oct (10)	Nov (9)	Dec (7)
2004	Jan (4)	Feb (10)	Mar (5)	Apr (18)	May (18)	Jun (14)	Jul (24)	Aug (14)	Sep (6)	Oct (18)	Nov (5)	Dec (3)
2005	Jan (5)	Feb (1)	Mar (5)	Apr (10)	May (10)	Jun (16)	Jul (46)	Aug (36)	Sep (16)	Oct (11)	Nov (12)	Dec (29)
2006	Jan (33)	Feb (45)	Mar (42)	Apr (23)	May (23)	Jun (21)	Jul (19)	Aug (23)	Sep (17)	Oct (50)	Nov (74)	Dec (44)
2007	Jan (35)	Feb (18)	Mar (46)	Apr (25)	May (26)	Jun (24)	Jul (33)	Aug (4)	Sep (41)	Oct (43)	Nov (23)	Dec (42)
2008	Jan (26)	Feb (20)	Mar (21)	Apr (18)	May (28)	Jun (32)	Jul (25)	Aug (28)	Sep (27)	Oct (34)	Nov (16)	Dec (42)
2009	Jan (21)	Feb (36)	Mar (40)	Apr (51)	May (27)	Jun (13)	Jul (38)	Aug (40)	Sep (5)	Oct (14)	Nov (4)	Dec (7)
2010	Jan (16)	Feb (10)	Mar (38)	Apr (83)	May (27)	Jun (41)	Jul (57)	Aug (24)	Sep (14)	Oct (22)	Nov (28)	Dec (42)
2011	Jan (52)	Feb (13)	Mar (41)	Apr (14)	May (24)	Jun (14)	Jul (16)	Aug (15)	Sep (19)	Oct (20)	Nov (35)	Dec (48)
2012	Jan (30)	Feb (9)	Mar (33)	Apr (15)	May (13)	Jun (13)	Jul (57)	Aug (20)	Sep (18)	Oct (29)	Nov (28)	Dec (9)
2013	Jan (19)	Feb (26)	Mar (44)	Apr (13)	May (38)	Jun (6)	Jul (24)	Aug (8)	Sep (7)	Oct (10)	Nov (12)	Dec (6)
2014	Jan (13)	Feb (6)	Mar (41)	Apr (5)	May (4)	Jun (3)	Jul (13)	Aug (9)	Sep (35)	Oct (36)	Nov (16)	Dec (4)
2015	Jan (6)	Feb (4)	Mar (7)	Apr	May	Jun	Jul (1)	Aug (2)	Sep (10)	Oct (4)	Nov (13)	Dec (3)
2016	Jan (6)	Feb (12)	Mar (6)	Apr (21)	May (9)	Jun (16)	Jul (13)	Aug (13)	Sep (11)	Oct (9)	Nov (20)	Dec (18)
2017	Jan (7)	Feb (19)	Mar (9)	Apr (12)	May (12)	Jun (35)	Jul (7)	Aug (3)	Sep	Oct (1)	Nov (4)	Dec
2018	Jan (4)	Feb (1)	Mar (3)	Apr (8)	May (9)	Jun (8)	Jul (6)	Aug (7)	Sep (8)	Oct (1)	Nov (6)	Dec
2019	Jan (6)	Feb (9)	Mar (3)	Apr (3)	May (4)	Jun	Jul	Aug (4)	Sep (3)	Oct (3)	Nov (3)	Dec (1)
2020	Jan (4)	Feb (4)	Mar (22)	Apr (1)	May (16)	Jun (12)	Jul (3)	Aug (10)	Sep (5)	Oct (1)	Nov (24)	Dec (1)
2021	Jan (2)	Feb (10)	Mar (9)	Apr (7)	May (8)	Jun (10)	Jul (2)	Aug	Sep	Oct	Nov (2)	Dec
2022	Jan (3)	Feb (4)	Mar (5)	Apr (2)	May	Jun	Jul	Aug (6)	Sep (1)	Oct (2)	Nov (2)	Dec
2023	Jan (2)	Feb (6)	Mar	Apr	May (13)	Jun	Jul	Aug (6)	Sep	Oct	Nov (1)	Dec (4)
2024	Jan (3)	Feb	Mar (5)	Apr (1)	May (5)	Jun (1)	Jul (1)	Aug	Sep	Oct (3)	Nov (3)	Dec
2025	Jan	Feb (5)	Mar (33)	Apr (8)	May (10)	Jun (7)	Jul	Aug	Sep	Oct	Nov	Dec

squirrel-sql-users Mailing List for SQuirreL SQL Client (Page 8)

A Java SQL client for any JDBC compliant database

squirrel-sql-users — A subscriber only discussion list for SQuirreL