squirrel-sql-users — A subscriber only discussion list for SQuirreL

Re: [Squirrel-sql-users] Cannot browse object tree nodes

[Robert M. <rob...@gm...>]

On 10/31/06, Lars Heill <Lar...@su...> wrote:
>
> That did it -
> with the latest snapshot (20061028_1043) I can browse and play around nicely now :)
>
> I will query my jdbc friends downstairs and ask why the table names are all
> right space padded to 32 char length.
>
> Thanks!

Glad to hear it.  By the way, can you also query your
"jdbc friends" to see if they have a Hibernate dialect
for HADB's SQL syntax (I'd like to add support for it in
the DBCopy and Refactoring plugins)

Rob

[Squirrel-sql-users] AS400 Object Tree problem

[Gupta, A. <abh...@gs...>]
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Re: [Squirrel-sql-users] Cannot browse object tree nodes

[Lars H. <Lar...@Su...>]

Robert Manning wrote, On 10/28/06 01:04:
> 
> Not sure what that code is trying to do - but I didn't write it so that's not
> really saying much.  In any case, it seems to me that your database (HADB)
> is playing tricks on us with all that right-padding.  I changed line 211 above
> to look like:
> 
> if(type.trim().equalsIgnoreCase(types[i]))
> 
> and I see tables now.  So I'll check that into CVS and you can check out the
> next snapshot when you have time and let me know if that solves the problem.
> There was one other user (Bernard) who noted this same symptom with
> MS-SQLServer, so CC'ing the list and I'm hopeful that this addresses the
> problem there as well.

That did it - 
with the latest snapshot (20061028_1043) I can browse and play around nicely now :)

I will query my jdbc friends downstairs and ask why the table names are all
right space padded to 32 char length.

Thanks!

Lars

[Squirrel-sql-users] squirrel exception problem on linux: how to close window?

[<bmi...@ou...>]

Hi,

Problem: my squirrel is frozen. I have some complex sql i'd like to save. I wondered if anyone knew how to get past this. It's likely OS (linux) and desktop dependent.

I have an older version of squirrel. I tried to open a new connection ;
squirrel had a connection exception. At this point I have  very small
window on my screen which I cannot close or expand [ it looks like a disk].  I think this window contains my 'squirrel exception'. (I'm using xfce4; i think w/ gnome i
can expand and close this window..)

How can I close this window?

bill m

Log error is here:
find JDBC driver class for HSQLDB In-Memory: org.hsqldb.jdbcDriver
5662638 [Thread-1] ERROR
net.sourceforge.squirrel_sql.client.mainframe.action.ConnectToAliasCommand 
- Unexpected Error occured attempting to open an SQL connection.
java.sql.SQLException: Unable to connect to any hosts due to exception:
java.net.ConnectException: Connection refused
        at com.mysql.jdbc.Connection.createNewIO(Connection.java:1719)
        at com.mysql.jdbc.Connection.<init>(Connection.java:432)
        at
com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:400)
        at
net.sourceforge.squirrel_sql.fw.sql.SQLDriverManager.getConnection(SQLDriverManager.java:99)
        at
net.sourceforge.squirrel_sql.client.mainframe.action.OpenConnectionCommand.execute(OpenConnectionCommand.java:112)

[Squirrel-sql-users] squirrel exception problem on linux: how to close window?

[<bmi...@ou...>]

Hi,

i have an older version of squirrel. I tried to open a new connection ;
squirrel had a connection exception. At this point I have  very small
window on my screen which I cannot close or expand. I think this window
contains my 'squirrel exception'. (I'm using xfce4; i think w/ gnome i
can expand and close this window..)

How can I close this window?

bill m

Log error is here:
find JDBC driver class for HSQLDB In-Memory: org.hsqldb.jdbcDriver
5662638 [Thread-1] ERROR
net.sourceforge.squirrel_sql.client.mainframe.action.ConnectToAliasCommand 
- Unexpected Error occured attempting to open an SQL connection.
java.sql.SQLException: Unable to connect to any hosts due to exception:
java.net.ConnectException: Connection refused
        at com.mysql.jdbc.Connection.createNewIO(Connection.java:1719)
        at com.mysql.jdbc.Connection.<init>(Connection.java:432)
        at
com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:400)
        at
net.sourceforge.squirrel_sql.fw.sql.SQLDriverManager.getConnection(SQLDriverManager.java:99)
        at
net.sourceforge.squirrel_sql.client.mainframe.action.OpenConnectionCommand.execute(OpenConnectionCommand.java:112)

Re: [Squirrel-sql-users] Any way to export table graph to jpeg/gif/clipboard?

[Gerd W. <bir...@t-...>]

Hi David,

the Graph plugin now allows to save jpg images to files instead of printing 
them. The image files are an exact copy of what would be sent to a printer and 
can easily be used within other applications. These changes are available in CVS 
right now and will be in our next snapshot.

I hope my changes will suit your needs.

Gerd



Karr, David wrote:
> I filed an ER for this, but I figured I should ask here also.
> 
> The table graph feature is interesting, but once I've created one, I
> can't do much with it that's very useful.  I can look at it, and I can
> print it (the page boundary feature is nice).  However, there's no way
> to export the graph (that I can see) to a form that's practical for
> insertion into a document.  Did I miss something obvious?
> 
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys -- and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Squirrel-sql-users mailing list
> Squ...@li...
> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users
> 

Re: [Squirrel-sql-users] Cannot browse object tree nodes

[Robert M. <rob...@gm...>]

On 10/27/06, Lars Heill <Lar...@su...> wrote:
>
> Have a nice weekend - and thanks for chasing this!
>

Lars,

I'm downloading HADB for linux now.  However, I found the real problem.  It
has to do with the fact that everything that comes back from HADB is
right-padded
to be 32-chars.  So, when we ask DatabaseMetaData for table in the schema
using DatabaseMetaData.getTables, it tells us that the type of the table is

"TABLE                             "

And when we look for whether or not we cache these objects in
SchemaInfoCache.containsType(String[] types, String type) we
do the following:

if(type.equals(types[i]))  // line: 211

And types[] contains "TABLE" so we never find it, and skip over
it in SchemaInfoCache.getITableInfos at line 921:

if(false == SchemaInfoCache.containsType(types, iTableInfo.getType()))
{
    continue;
}

Not sure what that code is trying to do - but I didn't write it so that's not
really saying much.  In any case, it seems to me that your database (HADB)
is playing tricks on us with all that right-padding.  I changed line 211 above
to look like:

if(type.trim().equalsIgnoreCase(types[i]))

and I see tables now.  So I'll check that into CVS and you can check out the
next snapshot when you have time and let me know if that solves the problem.
There was one other user (Bernard) who noted this same symptom with
MS-SQLServer, so CC'ing the list and I'm hopeful that this addresses the
problem there as well.

Rob

Re: [Squirrel-sql-users] Issue with Squirrel 2.3

[Harris, B. W <bh...@we...>]

I examined the Global Preferences and the Session Properties and didn't
see anything in there that would change row count.  I changed the
caching to see if that made a difference but nothing.  When I select on
a schema in the tree I do see on the right side the properties for the
schema (also for the database), it's just when I select on anything
within the schema, like Views, Tables, Procedures where there are no
children in the tree and nothing shows in the right.  When I use version
2.2 everything works fine.

Bernard Harris
Project Manager
Weather Shield Mfg., Inc.
bh...@we...


-----Original Message-----
From: Rowe, Neville [mailto:Nev...@dk...]=20
Sent: Friday, October 27, 2006 8:20 AM
To: Harris, Bernard W
Cc: squ...@li...
Subject: RE: [Squirrel-sql-users] Issue with Squirrel 2.3

I've not seen this, but it isn't something as simple as the rowcount
settings is it ? If you go into one of the preferences windows you can
set rowcounts against things and I believe I've seen that cause the
object browser to do strange things.

Neville=20

-----Original Message-----
From: squ...@li...
[mailto:squ...@li...] On Behalf Of
Harris, Bernard W
Sent: 27 October 2006 13:36
To: Robert Manning
Cc: squ...@li...
Subject: Re: [Squirrel-sql-users] Issue with Squirrel 2.3

I am currently using MS SQL and IBM iSeries.  It does the same for both.

Bernard Harris
Project Manager
Weather Shield Mfg., Inc.
bh...@we...

-----Original Message-----
From: Robert Manning [mailto:rob...@gm...]
Sent: Thursday, October 26, 2006 6:36 PM
To: Harris, Bernard W
Cc: squ...@li...
Subject: Re: [Squirrel-sql-users] Issue with Squirrel 2.3

On 10/26/06, Harris, Bernard W <bh...@we...> wrote:
> I have been using Squirrel for about 3 months and enjoy the program
greatly.
>  Recently I tried to upgrade to 2.3 rc2 and had an issue with not
being able
> to see the tables within a database when I selected the TABLE tree
element
> within a database.  I thought it might be an issue with the rc2 so I
waited
> until the final release.  Today I tried the final and had the same
issue.
> Basically my issue is that I have connected to the database and am
reviewing
> the tree elements in the Objects tab.  When I select the TABLE (or any

> others for that matter) element under the database I get nothing.
When I do
> this in version 2.2 of Squirrel the tree expands and I see each table
inside
> the database.  Is this a known issue or is something set improperly?
>

Hi,

What database are you using(Version and driver)?  I'm seeing the same
issue with Sun HADB (thanks to Lars Heill for helping me to get it setup
BTW), which I'm trying to debug at the moment.  It might be useful to
other developers on the team to know if there are any other DBs on which
to reproduce the issue.

Rob

------------------------------------------------------------------------
-
Using Tomcat but need to do more? Need to support web services,
security?
Get stuff done quickly with pre-integrated technology to make your job
easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
_______________________________________________
Squirrel-sql-users mailing list
Squ...@li...
https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users


------------------------------------------------------------------------
--------
The information contained herein is confidential and is intended solely
for the
addressee. Access by any other party is unauthorised without the express

written permission of the sender. If you are not the intended recipient,
please=20
contact the sender either via the company switchboard on +44 (0)20 7623
8000, or
via e-mail return. If you have received this e-mail in error or wish to
read our
e-mail disclaimer statement and monitoring policy, please refer to=20
http://www.dresdnerkleinwort.com/disc/email/ or contact the sender.=20
------------------------------------------------------------------------
--------

Re: [Squirrel-sql-users] Issue with Squirrel 2.3

[Rowe, N. <Nev...@dk...>]

I've not seen this, but it isn't something as simple as the rowcount
settings is it ? If you go into one of the preferences windows you can
set rowcounts against things and I believe I've seen that cause the
object browser to do strange things.

Neville=20

-----Original Message-----
From: squ...@li...
[mailto:squ...@li...] On Behalf Of
Harris, Bernard W
Sent: 27 October 2006 13:36
To: Robert Manning
Cc: squ...@li...
Subject: Re: [Squirrel-sql-users] Issue with Squirrel 2.3

I am currently using MS SQL and IBM iSeries.  It does the same for both.

Bernard Harris
Project Manager
Weather Shield Mfg., Inc.
bh...@we...

-----Original Message-----
From: Robert Manning [mailto:rob...@gm...]
Sent: Thursday, October 26, 2006 6:36 PM
To: Harris, Bernard W
Cc: squ...@li...
Subject: Re: [Squirrel-sql-users] Issue with Squirrel 2.3

On 10/26/06, Harris, Bernard W <bh...@we...> wrote:
> I have been using Squirrel for about 3 months and enjoy the program
greatly.
>  Recently I tried to upgrade to 2.3 rc2 and had an issue with not
being able
> to see the tables within a database when I selected the TABLE tree
element
> within a database.  I thought it might be an issue with the rc2 so I
waited
> until the final release.  Today I tried the final and had the same
issue.
> Basically my issue is that I have connected to the database and am
reviewing
> the tree elements in the Objects tab.  When I select the TABLE (or any

> others for that matter) element under the database I get nothing.
When I do
> this in version 2.2 of Squirrel the tree expands and I see each table
inside
> the database.  Is this a known issue or is something set improperly?
>

Hi,

What database are you using(Version and driver)?  I'm seeing the same
issue with Sun HADB (thanks to Lars Heill for helping me to get it setup
BTW), which I'm trying to debug at the moment.  It might be useful to
other developers on the team to know if there are any other DBs on which
to reproduce the issue.

Rob

------------------------------------------------------------------------
-
Using Tomcat but need to do more? Need to support web services,
security?
Get stuff done quickly with pre-integrated technology to make your job
easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
_______________________________________________
Squirrel-sql-users mailing list
Squ...@li...
https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users


---------------------------------------------------------------------------=
-----
The information contained herein is confidential and is intended solely for=
 the
addressee. Access by any other party is unauthorised without the express=20
written permission of the sender. If you are not the intended recipient, pl=
ease=20
contact the sender either via the company switchboard on +44 (0)20 7623 800=
0, or
via e-mail return. If you have received this e-mail in error or wish to rea=
d our
e-mail disclaimer statement and monitoring policy, please refer to=20
http://www.dresdnerkleinwort.com/disc/email/ or contact the sender.=20
---------------------------------------------------------------------------=
-----

Re: [Squirrel-sql-users] Issue with Squirrel 2.3

[Harris, B. W <bh...@we...>]

I am currently using MS SQL and IBM iSeries.  It does the same for both.

Bernard Harris
Project Manager
Weather Shield Mfg., Inc.
bh...@we...

-----Original Message-----
From: Robert Manning [mailto:rob...@gm...]=20
Sent: Thursday, October 26, 2006 6:36 PM
To: Harris, Bernard W
Cc: squ...@li...
Subject: Re: [Squirrel-sql-users] Issue with Squirrel 2.3

On 10/26/06, Harris, Bernard W <bh...@we...> wrote:
> I have been using Squirrel for about 3 months and enjoy the program
greatly.
>  Recently I tried to upgrade to 2.3 rc2 and had an issue with not
being able
> to see the tables within a database when I selected the TABLE tree
element
> within a database.  I thought it might be an issue with the rc2 so I
waited
> until the final release.  Today I tried the final and had the same
issue.
> Basically my issue is that I have connected to the database and am
reviewing
> the tree elements in the Objects tab.  When I select the TABLE (or any
> others for that matter) element under the database I get nothing.
When I do
> this in version 2.2 of Squirrel the tree expands and I see each table
inside
> the database.  Is this a known issue or is something set improperly?
>

Hi,

What database are you using(Version and driver)?  I'm seeing the same
issue with Sun HADB (thanks to Lars Heill for helping me to get it setup
BTW),
which I'm trying to debug at the moment.  It might be useful to other
developers
on the team to know if there are any other DBs on which to reproduce the
issue.

Rob

Re: [Squirrel-sql-users] Issue with Squirrel 2.3

[Robert M. <rob...@gm...>]

On 10/26/06, Harris, Bernard W <bh...@we...> wrote:
> I have been using Squirrel for about 3 months and enjoy the program greatly.
>  Recently I tried to upgrade to 2.3 rc2 and had an issue with not being able
> to see the tables within a database when I selected the TABLE tree element
> within a database.  I thought it might be an issue with the rc2 so I waited
> until the final release.  Today I tried the final and had the same issue.
> Basically my issue is that I have connected to the database and am reviewing
> the tree elements in the Objects tab.  When I select the TABLE (or any
> others for that matter) element under the database I get nothing.  When I do
> this in version 2.2 of Squirrel the tree expands and I see each table inside
> the database.  Is this a known issue or is something set improperly?
>

Hi,

What database are you using(Version and driver)?  I'm seeing the same
issue with Sun HADB (thanks to Lars Heill for helping me to get it setup BTW),
which I'm trying to debug at the moment.  It might be useful to other developers
on the team to know if there are any other DBs on which to reproduce the issue.

Rob

Re: [Squirrel-sql-users] Issue with Squirrel 2.3

[Karr, D. <dav...@wa...>]

The only issue I've seen with v2.3 is that some of the older revisions
of JDK 1.4.2 had some problems with it.  When I upgraded to one of the
later revisions, my issues went away. I believe this mostly affected
saving of alias definitions, but you might want to make sure you're
using a relatively recent JDK revision.


________________________________

	From: squ...@li...
[mailto:squ...@li...] On Behalf Of
Harris, Bernard W
	Sent: Thursday, October 26, 2006 11:52 AM
	To: squ...@li...
	Subject: [Squirrel-sql-users] Issue with Squirrel 2.3
=09
=09

	Hello,

	=20

	I have been using Squirrel for about 3 months and enjoy the
program greatly.  Recently I tried to upgrade to 2.3 rc2 and had an
issue with not being able to see the tables within a database when I
selected the TABLE tree element within a database.  I thought it might
be an issue with the rc2 so I waited until the final release.  Today I
tried the final and had the same issue.  Basically my issue is that I
have connected to the database and am reviewing the tree elements in the
Objects tab.  When I select the TABLE (or any others for that matter)
element under the database I get nothing.  When I do this in version 2.2
of Squirrel the tree expands and I see each table inside the database.
Is this a known issue or is something set improperly?

	=20

	Thanks,

	=20

	Bernard Harris

	Project Manager

	Weather Shield Mfg., Inc.

	bh...@we...

	=20

[Squirrel-sql-users] Issue with Squirrel 2.3

[Harris, B. W <bh...@we...>]

Hello,

=20

I have been using Squirrel for about 3 months and enjoy the program
greatly.  Recently I tried to upgrade to 2.3 rc2 and had an issue with
not being able to see the tables within a database when I selected the
TABLE tree element within a database.  I thought it might be an issue
with the rc2 so I waited until the final release.  Today I tried the
final and had the same issue.  Basically my issue is that I have
connected to the database and am reviewing the tree elements in the
Objects tab.  When I select the TABLE (or any others for that matter)
element under the database I get nothing.  When I do this in version 2.2
of Squirrel the tree expands and I see each table inside the database.
Is this a known issue or is something set improperly?

=20

Thanks,

=20

Bernard Harris

Project Manager

Weather Shield Mfg., Inc.

bh...@we...

=20

Re: [Squirrel-sql-users] Cannot browse object tree nodes

[Lars H. <Lar...@Su...>]

Robert Manning wrote:
> On 10/19/06, Lars Heill <Lar...@su...> wrote:
>> Robert Manning wrote, On 10/19/06 03:43:
>>> On 10/18/06, Lars Heill <Lar...@su...> wrote:
>>>> Lars Heill wrote:
>> ...
>>>>> Only I do not see any of my tables or views in the various
>>>>> schemas, just a generic
>>>>>
>>>>>  <alias>
>>>>>    <schema>
>>>>>      SYSTEM TABLE
>>>>>      TABLE
>>>>>      VIEW
>>>>>      UDT
>>>>>
>>>>> Refreshing "Tree and Cache" or "Item", I see my table names
>>>>> flash by on the status line, but no tables/views show up in
>>>>> the object tree.
>>> DatabaseMetaData is used to build the object tree.  supportsSchemas or
>>> supportsCatalogs need to return true.  Beyond that getTables needs to return
>>> the tables for the selected schema/catalog.
>>>
>>>> In case it matters: it is a JDBC 3.0 driver, and the database
>>>> has 72 schemas.
>>> I believe I've seen this issue with SQLBase in the past due to an incomplete
>>> driver implementation.  What database and driver are you using?  Any exceptions
>>> in the log?
>> Thanks Rob,
>>
>> I have done some more checking, and it turns out it is not a problem
>> with my database or driver (Sun HADB), as everything works nicely in
>> StarOffice 8 and in SQuirreL 2.2 final.
>>
>> Below are snippets from my attempts with SQuirreL 2.3 final (which I
>> tried on both Windows XP pro and Solaris 10 x86), showing some exceptions
>> I get whenever I try to browse a TABLE or VIEW object:
>>
>>   * GUI work done in wrong thread
>>   * GUI Thread is doing database work
>>
>> Is this a known issue?  - with a known workaround?
>>
> 
> No, the messages about work being done in the wrong thread are performance
> reminders for the developers.  Generally it's not good to use the GUI
> thread for
> database work, or the application threads for GUI work.  Not saying it doesn't
> happen - it does - but generally it's not good. I've removed those message for
> 2.4 because they obscure any other debug messages.

OK, thanks.

> When you refresh the object tree in 2.3, does that change anything.  Are you
> using the new schema caching which just became available in 2.3?

Refreshing the object tree or an item in it does not change anything.
Messages whizz past on the status line, and I believe I recognize my
table names there (a lot, difficult to tell).

I have tried all kinds of caching, yes; on everything, and on select
schemas: no effect on the object tree.

If you believe any later public builds might affect this, I would be
willing to test them.

Regards,
Lars

Re: [Squirrel-sql-users] Cannot browse object tree nodes

[Robert M. <rob...@gm...>]

On 10/19/06, Lars Heill <Lar...@su...> wrote:
> Robert Manning wrote, On 10/19/06 03:43:
> > On 10/18/06, Lars Heill <Lar...@su...> wrote:
> >> Lars Heill wrote:
> ...
> >>> Only I do not see any of my tables or views in the various
> >>> schemas, just a generic
> >>>
> >>>  <alias>
> >>>    <schema>
> >>>      SYSTEM TABLE
> >>>      TABLE
> >>>      VIEW
> >>>      UDT
> >>>
> >>> Refreshing "Tree and Cache" or "Item", I see my table names
> >>> flash by on the status line, but no tables/views show up in
> >>> the object tree.
> >
> > DatabaseMetaData is used to build the object tree.  supportsSchemas or
> > supportsCatalogs need to return true.  Beyond that getTables needs to return
> > the tables for the selected schema/catalog.
> >
> >> In case it matters: it is a JDBC 3.0 driver, and the database
> >> has 72 schemas.
> >
> > I believe I've seen this issue with SQLBase in the past due to an incomplete
> > driver implementation.  What database and driver are you using?  Any exceptions
> > in the log?
>
> Thanks Rob,
>
> I have done some more checking, and it turns out it is not a problem
> with my database or driver (Sun HADB), as everything works nicely in
> StarOffice 8 and in SQuirreL 2.2 final.
>
> Below are snippets from my attempts with SQuirreL 2.3 final (which I
> tried on both Windows XP pro and Solaris 10 x86), showing some exceptions
> I get whenever I try to browse a TABLE or VIEW object:
>
>   * GUI work done in wrong thread
>   * GUI Thread is doing database work
>
> Is this a known issue?  - with a known workaround?
>

No, the messages about work being done in the wrong thread are performance
reminders for the developers.  Generally it's not good to use the GUI
thread for
database work, or the application threads for GUI work.  Not saying it doesn't
happen - it does - but generally it's not good. I've removed those message for
2.4 because they obscure any other debug messages.

When you refresh the object tree in 2.3, does that change anything.  Are you
using the new schema caching which just became available in 2.3?

Rob

Re: [Squirrel-sql-users] Cannot browse object tree nodes

[Lars H. <Lar...@Su...>]

Robert Manning wrote, On 10/19/06 03:43:
> On 10/18/06, Lars Heill <Lar...@su...> wrote:
>> Lars Heill wrote:
...
>>> Only I do not see any of my tables or views in the various
>>> schemas, just a generic
>>>
>>>  <alias>
>>>    <schema>
>>>      SYSTEM TABLE
>>>      TABLE
>>>      VIEW
>>>      UDT
>>>
>>> Refreshing "Tree and Cache" or "Item", I see my table names
>>> flash by on the status line, but no tables/views show up in
>>> the object tree.
> 
> DatabaseMetaData is used to build the object tree.  supportsSchemas or
> supportsCatalogs need to return true.  Beyond that getTables needs to return
> the tables for the selected schema/catalog.
> 
>> In case it matters: it is a JDBC 3.0 driver, and the database
>> has 72 schemas.
> 
> I believe I've seen this issue with SQLBase in the past due to an incomplete
> driver implementation.  What database and driver are you using?  Any exceptions
> in the log?

Thanks Rob,

I have done some more checking, and it turns out it is not a problem
with my database or driver (Sun HADB), as everything works nicely in
StarOffice 8 and in SQuirreL 2.2 final.

Below are snippets from my attempts with SQuirreL 2.3 final (which I
tried on both Windows XP pro and Solaris 10 x86), showing some exceptions
I get whenever I try to browse a TABLE or VIEW object:

  * GUI work done in wrong thread
  * GUI Thread is doing database work

Is this a known issue?  - with a known workaround?

I am happy with 2.2 final for now, though :)  Snappy little thing!

Regards,
Lars


--- BEGIN log snippets ----------------------------------------------------
0    [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - No logger configuration file passed on command line arguments. Using default log file: /home/xxx/.squirrel-sql/logs/squirrel-sql.log
2    [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - #############################################################################################################
4    [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - # Starting SQuirreL SQL Client Version 2.3 final at 10/19/06 1:23 PM
4    [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - #############################################################################################################
10   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - SQuirreL SQL Client Version 2.3 final started: Thu Oct 19 13:23:27 CEST 2006
11   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - Copyright (c) 2001-2006 
Colin Bell, Gerd Wagner, Rob Manning and others
11   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - java.vendor: Sun Microsystems Inc.
11   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - java.version: 1.5.0_07
11   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - java.runtime.name: Java(TM) 2 Runtime Environment, Standard Edition
11   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - os.name: SunOS
18   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - os.version: 5.10
18   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - os.arch: x86
18   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - user.dir: /home/xxx
18   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - user.home: /home/xxx
18   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - java.home: /usr/jdk/instances/jdk1.5.0/jre
18   [main] INFO  net.sourceforge.squirrel_sql.client.SquirrelLoggerFactory  - java.class.path: /home/xxx/opt/SQuirreL/squirrel-sql.jar
144  [main] DEBUG net.sourceforge.squirrel_sql.fw.util.ProxyHandler  - Not using HTTP proxy
505  [main] DEBUG net.sourceforge.squirrel_sql.fw.util.Resources  - No resource found for action.net.sourceforge.squirrel_sql.client.mainframe.action.AboutAction : image
515  [main] DEBUG net.sourceforge.squirrel_sql.fw.util.Resources  - No resource found for action.net.sourceforge.squirrel_sql.client.session.action.ToolsPopupAction : image

...etc...

95118 [AWT-EventQueue-1] DEBUG net.sourceforge.squirrel_sql.fw.util.TaskThreadPool  - Creating thread nbr: 1
95124 [Thread-3] DEBUG net.sourceforge.squirrel_sql.fw.util.TaskThreadPool  - Returning thread. 1 threads available
95124 [Thread-3] DEBUG net.sourceforge.squirrel_sql.fw.util.TaskThreadPool  - Using a thread. 0 threads available
95747 [Thread-3] DEBUG net.sourceforge.squirrel_sql.fw.util.TaskThreadPool  - Creating thread nbr: 2
95748 [Thread-4] DEBUG net.sourceforge.squirrel_sql.fw.util.TaskThreadPool  - Returning thread. 1 threads available
95761 [Thread-4] DEBUG net.sourceforge.squirrel_sql.fw.util.TaskThreadPool  - Using a thread. 0 threads available
95766 [Thread-3] DEBUG net.sourceforge.squirrel_sql.client.gui.util.ThreadCheckingRepaintManager  - GUI work done in wrong thread
java.lang.Exception: GUI work done in wrong thread
	at net.sourceforge.squirrel_sql.client.gui.util.ThreadCheckingRepaintManager.checkThread(ThreadCheckingRepaintManager.java:48)
	at net.sourceforge.squirrel_sql.client.gui.util.ThreadCheckingRepaintManager.addDirtyRegion(ThreadCheckingRepaintManager.java:59)
	at javax.swing.JComponent.repaint(JComponent.java:4518)
	at java.awt.Component.repaint(Component.java:2731)
	at javax.swing.JComponent.setEnabled(JComponent.java:2575)
	at javax.swing.AbstractButton.setEnabled(AbstractButton.java:1918)
	at javax.swing.AbstractButton$ButtonActionPropertyChangeListener.propertyChange(AbstractButton.java:1188)
	at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:333)
	at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:270)
	at javax.swing.AbstractAction.firePropertyChange(AbstractAction.java:178)
	at javax.swing.AbstractAction.setEnabled(AbstractAction.java:138)
	at net.sourceforge.squirrel_sql.client.session.action.ToggleAutoCommitAction.setSession(ToggleAutoCommitAction.java:63)
	at net.sourceforge.squirrel_sql.client.action.ActionCollection.setCurrentSession(ActionCollection.java:377)
	at net.sourceforge.squirrel_sql.client.gui.WindowManager$SessionListener.sessionActivated(WindowManager.java:1159)
	at net.sourceforge.squirrel_sql.client.session.SessionManager.fireSessionActivated(SessionManager.java:476)
	at net.sourceforge.squirrel_sql.client.session.SessionManager.setActiveSession(SessionManager.java:152)
	at net.sourceforge.squirrel_sql.client.session.SessionManager.createSession(SessionManager.java:142)
	at net.sourceforge.squirrel_sql.client.mainframe.action.ConnectToAliasCommand$SheetHandler.createSession(ConnectToAliasCommand.java:349)
	at net.sourceforge.squirrel_sql.client.mainframe.action.ConnectToAliasCommand$SheetHandler.run(ConnectToAliasCommand.java:313)
	at net.sourceforge.squirrel_sql.fw.util.TaskExecuter.run(TaskExecuter.java:82)
	at java.lang.Thread.run(Thread.java:595)

...many more...then:

95796 [AWT-EventQueue-1] DEBUG net.sourceforge.squirrel_sql.client.gui.WindowManager  - Registering net.sourceforge.squirrel_sql.client.gui.session.SessionInternalFrame in WindowManager
95830 [AWT-EventQueue-1] DEBUG net.sourceforge.squirrel_sql.client.session.Session  - GUI Thread is doing database work
java.lang.Exception: GUI Thread is doing database work
	at net.sourceforge.squirrel_sql.client.session.Session.checkThread(Session.java:914)
	at net.sourceforge.squirrel_sql.client.session.Session.getSQLConnection(Session.java:360)
	at net.sourceforge.squirrel_sql.client.session.mainpanel.objecttree.ObjectTreeModel$RootNode.createDbo(ObjectTreeModel.java:371)
	at net.sourceforge.squirrel_sql.client.session.mainpanel.objecttree.ObjectTreeModel$RootNode.<init>(ObjectTreeModel.java:366)
	at net.sourceforge.squirrel_sql.client.session.mainpanel.objecttree.ObjectTreeModel.createRootNode(ObjectTreeModel.java:265)
	at net.sourceforge.squirrel_sql.client.session.mainpanel.objecttree.ObjectTreeModel.<init>(ObjectTreeModel.java:81)
	at net.sourceforge.squirrel_sql.client.session.mainpanel.objecttree.ObjectTree.<init>(ObjectTree.java:128)
	at net.sourceforge.squirrel_sql.client.session.mainpanel.objecttree.ObjectTreePanel.createGUI(ObjectTreePanel.java:871)
	at net.sourceforge.squirrel_sql.client.session.mainpanel.objecttree.ObjectTreePanel.<init>(ObjectTreePanel.java:155)
	at net.sourceforge.squirrel_sql.client.session.mainpanel.ObjectTreeTab.getComponent(ObjectTreeTab.java:83)
	at net.sourceforge.squirrel_sql.client.gui.session.MainPanel.addMainPanelTab(MainPanel.java:198)
	at net.sourceforge.squirrel_sql.client.gui.session.MainPanel.<init>(MainPanel.java:108)
	at net.sourceforge.squirrel_sql.client.gui.session.SessionPanel.createGUI(SessionPanel.java:456)
	at net.sourceforge.squirrel_sql.client.gui.session.SessionPanel.<init>(SessionPanel.java:121)
	at net.sourceforge.squirrel_sql.client.gui.session.SessionInternalFrame.createGUI(SessionInternalFrame.java:160)
	at net.sourceforge.squirrel_sql.client.gui.session.SessionInternalFrame.<init>(SessionInternalFrame.java:53)
	at net.sourceforge.squirrel_sql.client.gui.WindowManager.createInternalFrame(WindowManager.java:367)
	at net.sourceforge.squirrel_sql.client.mainframe.action.ConnectToAliasCommand$Runner.run(ConnectToAliasCommand.java:375)
	at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
	at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
	at net.sourceforge.squirrel_sql.client.Application$1.dispatchEvent(Application.java:168)
	at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
	at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
	at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
	at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
	at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

...many more...

--- END log snippets ------------------------------------------------------

Re: [Squirrel-sql-users] Cannot browse object tree nodes

[Robert M. <rob...@gm...>]

On 10/18/06, Lars Heill <Lar...@su...> wrote:
> Lars Heill wrote:
> > Hi,
> >
> > I have am trying to work against a local database.
> > Setting up SQuirreL to work with my own jdbc driver,
> > connecting and executing SQL was a snap.
> >
> > However, I was hoping to browse my db using the object tree.
> > Only I do not see any of my tables or views in the various
> > schemas, just a generic
> >
> >  <alias>
> >    <schema>
> >      SYSTEM TABLE
> >      TABLE
> >      VIEW
> >      UDT
> >
> > Refreshing "Tree and Cache" or "Item", I see my table names
> > flash by on the status line, but no tables/views show up in
> > the object tree.
> >
> > Might this be related to the FAQ item "I don't see an object
> > tree with PostgreSQL"?  If so, which metadata is my database
> > failing to supply?

DatabaseMetaData is used to build the object tree.  supportsSchemas or
supportsCatalogs need to return true.  Beyond that getTables needs to return
the tables for the selected schema/catalog.

>
> In case it matters: it is a JDBC 3.0 driver, and the database
> has 72 schemas.

I believe I've seen this issue with SQLBase in the past due to an incomplete
driver implementation.  What database and driver are you using?  Any exceptions
in the log?

Rob

Re: [Squirrel-sql-users] Cannot browse object tree nodes

[Lars H. <Lar...@Su...>]

Lars Heill wrote:
> Hi,
> 
> I have am trying to work against a local database.
> Setting up SQuirreL to work with my own jdbc driver,
> connecting and executing SQL was a snap.
> 
> However, I was hoping to browse my db using the object tree.
> Only I do not see any of my tables or views in the various
> schemas, just a generic
> 
>  <alias>
>    <schema>
>      SYSTEM TABLE
>      TABLE
>      VIEW
>      UDT
> 
> Refreshing "Tree and Cache" or "Item", I see my table names
> flash by on the status line, but no tables/views show up in
> the object tree.
> 
> Might this be related to the FAQ item "I don't see an object
> tree with PostgreSQL"?  If so, which metadata is my database
> failing to supply?

In case it matters: it is a JDBC 3.0 driver, and the database
has 72 schemas.

Thanks,
Lars

[Squirrel-sql-users] Cannot browse object tree nodes

[Lars H. <Lar...@Su...>]

Hi,

I have am trying to work against a local database.
Setting up SQuirreL to work with my own jdbc driver,
connecting and executing SQL was a snap.

However, I was hoping to browse my db using the object tree.
Only I do not see any of my tables or views in the various
schemas, just a generic

  <alias>
    <schema>
      SYSTEM TABLE
      TABLE
      VIEW
      UDT

Refreshing "Tree and Cache" or "Item", I see my table names
flash by on the status line, but no tables/views show up in
the object tree.

Might this be related to the FAQ item "I don't see an object
tree with PostgreSQL"?  If so, which metadata is my database
failing to supply?

Thanks,
Lars

Re: [Squirrel-sql-users] Fw: Connecting SQuirreL to Firebird

[Robert M. <rob...@gm...>]

On 10/17/06, Lu=EDs de Sousa <lui...@gm...> wrote:
> Thank you Rob and Ewan for your answers.
>
> This is an obvious begginners mistake, is there by change an user's manua=
l
> for Squirrel?
>
> Thanks once more,
>

Sure, there are several.  Here is one by Susan Cline for Derby which is
useful even though you are using Firebird:

http://db.apache.org/derby/integrate/SQuirreL_Derby.html


And here is an older one written by Kulvir Bhogal which focuses on
DB2:

http://www-128.ibm.com/developerworks/db2/library/techarticle/dm-0312bhogal=
/index.html

If you would like to write about your experience using Firebird
and SQuirreL we'd be delighted to put a link to it (or host it) on
the SQuirreL page. Obviously, documenting steps to setup a
Firebird database for use with SQuirreL would be a big help for
those who aren't familiar with it.

What makes Firebird different is that there is actually a plugin
for it that was written by Roman Rokytskyy.  There is a help
file for it, however I just noticed that it's missing from 2.3 final
install.  I'll write up a bug and fix it for 2.4 RC1 after I figure
out why it's missing.  Until then, you can reference it here:

http://squirrel-sql.cvs.sourceforge.net/*checkout*/squirrel-sql/sql12/plugi=
ns/firebird/doc/readme.html?revision=3D1.1

OK, I just looked at that and it's pretty useless.  So, if you
would like to document what is available when users install
the plugin that would also be very useful.  From looking at the code
it is apparent that there is a source tab for views, triggers,
procedures, and details about generators (sequences).  Also
there seems to be support for altering, activating and
deactivating indexes.  So a document might describe how to
create each of these items and then show how SQuirreL can
display information about them with the help of the Firebird
plugin using screenshots.  Would you like to help us out with
this?

Rob

[Squirrel-sql-users] Fw: Connecting SQuirreL to Firebird

[<lui...@gm...>]

Thank you Rob and Ewan for your answers.

This is an obvious begginners mistake, is there by change an user's manual 
for Squirrel?

Thanks once more,

Luís 

Re: [Squirrel-sql-users] Connecting SQuirreL to Firebird

[Robert M. <rob...@gm...>]

On 10/16/06, Lu=EDs de Sousa <lui...@gm...> wrote:
>
>
> Hello.
>
> I've installed Firebird 1.5 and SQuirreL 2.3 rc2 on a XP Pro box, and wou=
ld
> obviously like to wire them together.
>
> I've create a new Driver in the list by copying the existing Firebird
> JayBird driver. I'm using the following url to connect to the sample
> Firebird DB:
>
> jdbc:firebirdsql://localhost/C:\Program
> Files\Firebird\Firebird_1_5\examples\EMPLOYEE.FDB
>
> I've also added extra class paths to the JayBird jar files. When I click =
OK
> on Driver form I get the following:
>
> JDBC Driver Class Name cannot be blank.
>
> The textbox for class name is indeed empty, what should I put there?
>

Luis,

If you press the button for "List Drivers", you should see the following cl=
ass
show up in the "Class Name" drop down:

org.firebirdsql.jdbc.FBDriver

Rob

Re: [Squirrel-sql-users] Connecting SQuirreL to Firebird

[Erwan D. <erw...@ho...>]

Hello, Luis

Did you click on the List Drivers button, so that SquirreL searches for 
available classes?
Then, the list box should not be empty any more.

Erwan

>From: Luís de Sousa <lui...@gm...>
>To: <squ...@li...>
>Subject: [Squirrel-sql-users] Connecting SQuirreL to Firebird
>Date: Mon, 16 Oct 2006 16:03:38 +0100
>
>Hello.
>
>I've installed Firebird 1.5 and SQuirreL 2.3 rc2 on a XP Pro box, and would 
>obviously like to wire them together.
>
>I've create a new Driver in the list by copying the existing Firebird 
>JayBird driver. I'm using the following url to connect to the sample 
>Firebird DB:
>
>jdbc:firebirdsql://localhost/C:\Program 
>Files\Firebird\Firebird_1_5\examples\EMPLOYEE.FDB
>
>I've also added extra class paths to the JayBird jar files. When I click OK 
>on Driver form I get the following:
>
>JDBC Driver Class Name cannot be blank.
>
>The textbox for class name is indeed empty, what should I put there?
>
>Thanks,
>
>Luís


>-------------------------------------------------------------------------
>Using Tomcat but need to do more? Need to support web services, security?
>Get stuff done quickly with pre-integrated technology to make your job 
>easier
>Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
>http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642


>_______________________________________________
>Squirrel-sql-users mailing list
>Squ...@li...
>https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users

[Squirrel-sql-users] Connecting SQuirreL to Firebird

[<lui...@gm...>]

Hello.

I've installed Firebird 1.5 and SQuirreL 2.3 rc2 on a XP Pro box, and =
would obviously like to wire them together.=20

I've create a new Driver in the list by copying the existing Firebird =
JayBird driver. I'm using the following url to connect to the sample =
Firebird DB:

jdbc:firebirdsql://localhost/C:\Program =
Files\Firebird\Firebird_1_5\examples\EMPLOYEE.FDB

I've also added extra class paths to the JayBird jar files. When I click =
OK on Driver form I get the following:

JDBC Driver Class Name cannot be blank.

The textbox for class name is indeed empty, what should I put there?

Thanks,

Lu=EDs

Re: [Squirrel-sql-users] Loading data from CSV files

[Gerd W. <bir...@t-...>]

Hi Abhay,


Abhay Satpute wrote:
> Hello,
>  
> With the new version of SQirreL 2.3 we can output data to CSV files , 
> but can we import data from CSV files i.e. can we create a table from 
> CSV file OR can we insert data into existing tables from CSV files
No, we don't offer such a feature yet. It may come when other tasks concerning 
CSV export are done. See
http://sourceforge.net/pm/task.php?group_project_id=49016&group_id=28383&func=browse

If you would like to add the feature we would be grateful for your patches.

Gerd


>  
> I am not yet member of this mailing list , so could you be kind enough 
> to mail your replies directly to me
> Thx
>  
> --
> Abhay
>  
> 
> 
> ------------------------------------------------------------------------
> 
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Squirrel-sql-users mailing list
> Squ...@li...
> https://lists.sourceforge.net/lists/listinfo/squirrel-sql-users