[Spectrum24-bugs] A few more tid bits of info

[<dax...@gu...>]

> With debug, here is what I get:
>
> MfgName 'Symbol Technologies', Mode 41
> S24tCommand Status 0029 != Command 0021
> CmdStatus 0014 Command 0121 P0 004d P1 0000 P2 0000
> Could not set PowerSaveMode.
> Failed generic init.
> eth1: Spectrum24 Trilogy enable failure: error code -14

I've tried the card in a desktop machine that is using an ELAN P111
PCI-to-PCMCIA card.  On that computer I tried kernel 2.2.18 with
pcmcia-cs-3.1.23, kernel 2.4.0ac8 with the in kernel pcmcia drivers and
with external pcmcia-cs-3.1.23.  In all cases I get the above error
message.

I moved the card over to my laptop (a Dell Inspiron 5000), and within
Windows 2000, the card works fine.

Under Linux on the same laptop, using the RH7 kernel "2.2.16-22", I
updated to pcmcia-cs-3.1.23 and got the same error message from before,
and then I downgraded pcmcia-cs to 3.1.12 (the version that the
Spectrum24t driver was written against).  Still the same error message.

The card is has firmware version: V2.20-01 dated 09/21/2000.  Again, it is
a Symbol, Spectrum24 HighRate 11 Mbps, LA-41X1 PC Card.

Any help would be greatly appreciated,

Dax