Re: [Spectrum24-bugs] Q about Intel 2011 Wireless card

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Lee Keyser-Allen wrote:
> 
> On Tue, 12 Dec 2000, R. Cordova wrote:
> 
> > Sorry for the length of this, but it short I still see the same problem
> > with all the latest drivers. What should I try next?
> >
> 
> It seems that you have hit upon the problem that until now only I was
> experiencing.
> 
> What hardware are you using (laptop model/controller, etc.)
> 
> > Also where do I go to subscribe to this mailing list? Is there a mailman
> > URL?
> >
> 
> See below
> 
> > > >_______________________________________________
> > > >Spectrum24-bugs mailing list
> > > >Spe...@li...
> > > >http://lists.sourceforge.net/mailman/listinfo/spectrum24-bugs
> > _______________________________________________
> > Spectrum24-bugs mailing list
> > Spe...@li...
> > http://lists.sourceforge.net/mailman/listinfo/spectrum24-bugs
> >
> 
> I hope to have a fix out for this problem sometime in the next week. I
> currently have a patch which allows it to load and unload the module
> regardless of how stuck it gets. Now all I have to do is figure out why
> it's getting stuck ;) ...
> 
> Cheers,
>         Lee
> 
> =======================
>    Lee Keyser-Allen
> (lk...@ju...)
> =======================
If a have missed anything that might be of use, just let me know.

Here is my system configuration:

IBM Thinkpad 600
Distribution:                  Red Hat Linux
Operating System:              Linux
Distribution Version:          Red Hat Linux release 7.0 (Guinness)

Operating System Version:      #1 Tue Aug 22 16:49:06 EDT 2000
Operating System Release:      2.2.16-22
Processor Type:                i686
Memory:  		       295,899K

PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel 440BX - 82443BX Host (no AGP) (rev 2).
      Medium devsel.  Master Capable.  Latency=64.  
      Prefetchable 32 bit memory at 0x0 [0x8].
  Bus  0, device   2, function  0:
    CardBus bridge: Texas Instruments PCI1250 (rev 2).
      Medium devsel.  IRQ 11.  Master Capable.  Latency=168.  Min
Gnt=192.Max Lat=7.
      Non-prefetchable 32 bit memory at 0x20301000 [0x20301000].
  Bus  0, device   2, function  1:
    CardBus bridge: Texas Instruments PCI1250 (rev 2).
      Medium devsel.  IRQ 11.  Master Capable.  Latency=168.  Min
Gnt=192.Max Lat=7.
      Non-prefetchable 32 bit memory at 0x20300000 [0x20300000].
  Bus  0, device   3, function  0:
    VGA compatible controller: Neomagic MagicGraph NM2160 (rev 1).
      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master
Capable.  Latency=128.  Min Gnt=16.Max Lat=255.
      Prefetchable 32 bit memory at 0xe0000000 [0xe0000008].
      Non-prefetchable 32 bit memory at 0x20000000 [0x20000000].
      Non-prefetchable 32 bit memory at 0x20200000 [0x20200000].
  Bus  0, device   7, function  0:
    Bridge: Intel 82371AB PIIX4 ISA (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  No
bursts.  
  Bus  0, device   7, function  1:
    IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable. 
Latency=32.  
      I/O at 0xfcf0 [0xfcf1].
  Bus  0, device   7, function  2:
    USB Controller: Intel 82371AB PIIX4 USB (rev 1).
      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master
Capable.  No bursts.  
      I/O at 0x8400 [0x8401].
  Bus  0, device   7, function  3:
    Bridge: Intel 82371AB PIIX4 ACPI (rev 1).
      Medium devsel.  Fast back-to-back capable.

>cardctl config
Socket 0:
  not configured
Socket 1:
  Vcc 5.0V  Vpp1 0.0V  Vpp2 0.0V
  interface type is "memory and I/O"
  irq 9 [exclusive] [level]
  function 0:
    config base 0x03e0
      option 0x41 status 0x00 pin 0x00
    io 0x0180-0x01c7 [16bit]
  memory 0x0000-0x0fff @ 0xa0001000 [8bit]

>./dump_pirq 
Interrupt routing table found at address 0xf9e30:
  Version 1.0, size 0x0060
  Interrupt router is device 00:07.0
  PCI exclusive interrupt mask: 0x0800

Device 00:07.0 (slot 0):
  INTA: link 0x60, irq mask 0xdef8
  INTD: link 0x63, irq mask 0xdef8

Device 00:02.0 (slot 0):
  INTA: link 0x60, irq mask 0xdef8
  INTB: link 0x61, irq mask 0xdef8

Device 00:03.0 (slot 0):
  INTA: link 0x60, irq mask 0xdef8

Device 00:04.0 (slot 0):
  INTA: link 0x60, irq mask 0xdef8
  INTB: link 0x61, irq mask 0xdef8
  INTC: link 0x62, irq mask 0xdef8
  INTD: link 0x63, irq mask 0xdef8

Interrupt router at 00:07.0: Intel 82371AB PIIX4/PIIX4E PCI-to-ISA
bridge
  PIRQ1 (link 0x60): irq 11
  PIRQ2 (link 0x61): irq 11
  PIRQ3 (link 0x62): unrouted
  PIRQ4 (link 0x63): irq 11
  Serial IRQ: [enabled] [quiet] [frame=21] [pulse=4]

>./test_setup 
Current kernel: 2.2.16-22 #1 Tue Aug 22 16:49:06 EDT 2000
Module info from /lib/modules/2.2.16-22/pcmcia/pcmcia_core.o:
  Linux PCMCIA Card Services 3.1.22
  kernel build: 2.2.16-22 #1 Tue Aug 22 16:49:06 EDT 2000
  options:  [pci] [cardbus] [apm] [pnp]

Startup options from /etc/sysconfig/pcmcia:
  PCMCIA=yes
  PCIC=i82365
  PCIC_OPTS=
  CORE_OPTS=
  CARDMGR_OPTS=

Checking current syslog files in /var/log:
  All PCMCIA messages are in /var/log/messages.

Module status:
  The PCMCIA kernel modules are loaded correctly.

Daemon status:
  cardmgr is running (process 371)

Current socket status from /var/lib/pcmcia/stab:
  Socket 0: empty
  Socket 1: PRO/Wireless 2011 LAN PC Card