«Impossible to move other sources: / controlgris / 1 / traj / 2 / x $ 1 for example does not react.»
Please refer to the manual:
p 18:
NOTE: The Independent mode in multichannel is available only to place the sources independently. But the position of sources can't be automated independently. Only Source 1 is recorded. Therefore, after placing the sources, a different link should be chosen before recording the automation.
p. 20:
NOTE: Independent in multichannel is available only to place the sources independently. But their positions can't be automated independently. Only Source 1 is recorded. Therefore, after placing the sources, a different link should be chosen before recording the automation.
p. 24:
NOTE: Only the source No. 1 (master) is recorded, the other sources being slaves. It is always preferable to record the automation of trajectories in the DAW after you have found the right settings, because it frees up the CPU used by ControlGRIS.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Here, however, there may be confusion between our two tools and OSC control.
We have two tools:
- ControlGRIS, a plug-in;
- SpatGRIS2, a software.
Both receive information in OSC.
The first, ControlGRIS, mainly from external controllers, physical or software.
The second, SpatGRIS2, mainly coming from external software, like ControlGRIS or others.
So you can control them from any software that sends OSC like Max or PD.
• In ControlGRIS, as described in 7.2. OSC messages in ControlGRIS, you will only have access to source 1, the othersource being slaves. And as it is a plugin, you will be able to record the trajectories in a sequencer.
• In SpatGRIS2, as described in 7.1 OSC messages in SpatGRIS2, you can control all sources independently. But without being able to record the trajectories at least in our tools. We have not tested this possibility much, however. So it remains to be tested.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
«Impossible to move other sources: / controlgris / 1 / traj / 2 / x $ 1 for example does not react.»
Please refer to the manual:
p 18:
NOTE: The Independent mode in multichannel is available only to place the sources independently. But the position of sources can't be automated independently. Only Source 1 is recorded. Therefore, after placing the sources, a different link should be chosen before recording the automation.
p. 20:
NOTE: Independent in multichannel is available only to place the sources independently. But their positions can't be automated independently. Only Source 1 is recorded. Therefore, after placing the sources, a different link should be chosen before recording the automation.
p. 24:
NOTE: Only the source No. 1 (master) is recorded, the other sources being slaves. It is always preferable to record the automation of trajectories in the DAW after you have found the right settings, because it frees up the CPU used by ControlGRIS.
Here, however, there may be confusion between our two tools and OSC control.
We have two tools:
- ControlGRIS, a plug-in;
- SpatGRIS2, a software.
Both receive information in OSC.
The first, ControlGRIS, mainly from external controllers, physical or software.
The second, SpatGRIS2, mainly coming from external software, like ControlGRIS or others.
So you can control them from any software that sends OSC like Max or PD.
• In ControlGRIS, as described in 7.2. OSC messages in ControlGRIS, you will only have access to source 1, the othersource being slaves. And as it is a plugin, you will be able to record the trajectories in a sequencer.
• In SpatGRIS2, as described in 7.1 OSC messages in SpatGRIS2, you can control all sources independently. But without being able to record the trajectories at least in our tools. We have not tested this possibility much, however. So it remains to be tested.