From: <al...@ai...> - 2017-04-29 18:19:07
|
I've got a secondary (not 'boot' or 'root') drive attached in my system. It's "complaining" in boot logs, but seems to NOT have an issue reported by 'smartctl', and works OK after booting. I'd appreciate any ideas as to what the problem IS, or if there's really is one -- and what to do to fix it. Entirely poosible that I just don't understand what I'm seeing here :-/ On boot I see these messages, but the system ends up booted and functional -- including all the data on this drive, dmesg | egrep -i "ata2|ata-2" [ 2.790815] ata2: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fff980 irq 22 [ 3.273185] ata2: softreset failed (device not ready) [ 3.276322] ata2: applying PMP SRST workaround and retrying [ 3.456395] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.468932] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 3.471995] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.488495] ata2.00: configured for UDMA/133 [ 35.922130] ata2.00: exception Emask 0x0 SAct 0x20000000 SErr 0x80000 action 0x6 frozen [ 35.926153] ata2: SError: { 10B8B } [ 35.930101] ata2.00: failed command: READ FPDMA QUEUED [ 35.934077] ata2.00: cmd 60/08:e8:00:00:00/00:00:00:00:00/40 tag 29 ncq dma 4096 in [ 35.942198] ata2.00: status: { DRDY } [ 35.946311] ata2: hard resetting link [ 36.426065] ata2: softreset failed (device not ready) [ 36.430247] ata2: applying PMP SRST workaround and retrying [ 36.594063] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 36.603874] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 36.608124] ata2.00: revalidation failed (errno=-5) [ 41.797584] ata2: hard resetting link [ 42.277519] ata2: softreset failed (device not ready) [ 42.281749] ata2: applying PMP SRST workaround and retrying [ 42.445513] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 42.455368] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 42.459702] ata2.00: revalidation failed (errno=-5) [ 42.464016] ata2: limiting SATA link speed to 1.5 Gbps [ 47.685034] ata2: hard resetting link [ 48.164970] ata2: softreset failed (device not ready) [ 48.169275] ata2: applying PMP SRST workaround and retrying [ 48.332964] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 48.348678] ata2.00: configured for UDMA/133 [ 48.352981] ata2.00: device reported invalid CHS sector 0 [ 48.357355] ata2: EH complete 'ata2' corresponds to /dev/sdb on my system find /dev/disk | egrep -i "ata2|ata-2" /dev/disk/by-path/pci-0000:00:11.0-ata-2-part1 /dev/disk/by-path/pci-0000:00:11.0-ata-2 ls -al `find /dev/disk | egrep -i "ata2|ata-2"` lrwxrwxrwx 1 root root 9 Apr 29 10:50 /dev/disk/by-path/pci-0000:00:11.0-ata-2 -> ../../sdb lrwxrwxrwx 1 root root 10 Apr 29 10:50 /dev/disk/by-path/pci-0000:00:11.0-ata-2-part1 -> ../../sdb1 Checking the smartctl data for that drive smartctl -H /dev/sdb smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.10.13-2.ge5d11ce-default] (SUSE RPM) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED smartctl -x /dev/sdb smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.10.13-2.ge5d11ce-default] (SUSE RPM) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F3 Device Model: SAMSUNG HD103SJ Serial Number: S246J9EZC03669 LU WWN Device Id: 5 0024e9 2042536ec Firmware Version: 1AJ10001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Apr 29 10:57:37 2017 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9360) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 156) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 056 054 000 - 8531 3 Spin_Up_Time PO---K 075 069 025 - 7623 4 Start_Stop_Count -O--CK 098 098 000 - 2285 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 27432 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2236 191 G-Sense_Error_Rate -O---K 100 100 000 - 24 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 048 000 - 33 (Min/Max 15/52) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 098 098 000 - 1162 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 0 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 2301 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 1162 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1162 [1] occurred at disk power-on lifetime: 27432 hours (1143 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 01 00 08 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 00 00 00 40 00 00:00:00.000 READ FPDMA QUEUED 60 00 10 00 08 00 00 00 00 00 00 40 08 00:00:00.044 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.043 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.043 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.043 IDENTIFY DEVICE Error 1161 [0] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 01 00 08 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 00 00 00 40 00 00:00:00.000 READ FPDMA QUEUED 60 00 10 00 08 00 00 00 00 00 00 40 08 00:00:00.046 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.046 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.046 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.046 IDENTIFY DEVICE Error 1160 [7] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands] Error 1159 [6] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands] Error 1158 [5] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands] Error 1157 [4] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT 25 20 20 00 01 00 00 00 00 00 08 e0 00 00:00:00.036 READ DMA EXT c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] Error 1156 [3] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 09 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 9 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 00 00 00 08 e0 00 00:00:00.036 READ DMA EXT c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands] Error 1155 [2] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4157 - # 2 Short offline Completed without error 00% 4114 - # 3 Extended offline Completed without error 00% 4073 - # 4 Short offline Completed without error 00% 4056 - # 5 Short offline Completed without error 00% 4011 - # 6 Extended offline Completed without error 00% 3968 - # 7 Short offline Completed without error 00% 3949 - # 8 Short offline Completed without error 00% 3905 - # 9 Extended offline Completed without error 00% 3903 - #10 Short offline Completed without error 00% 3846 - #11 Short offline Completed without error 00% 3801 - #12 Extended offline Completed without error 00% 3761 - #13 Short offline Completed without error 00% 3745 - #14 Extended offline Completed without error 00% 3664 - #15 Short offline Completed without error 00% 3646 - #16 Short offline Completed without error 00% 3606 - #17 Extended offline Completed without error 00% 3568 - #18 Short offline Completed without error 00% 3552 - #19 Short offline Completed without error 00% 3507 - #20 Extended offline Completed without error 00% 3468 - #21 Short offline Completed without error 00% 3451 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 33/33 Celsius Lifetime Min/Max Temperature: 18/65 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (114) Index Estimated Time Temperature Celsius 115 2017-04-29 00:20 32 ************* ... ..( 5 skipped). .. ************* 121 2017-04-29 00:50 32 ************* 122 2017-04-29 00:55 34 *************** 123 2017-04-29 01:00 36 ***************** 124 2017-04-29 01:05 36 ***************** 125 2017-04-29 01:10 37 ****************** ... ..( 10 skipped). .. ****************** 8 2017-04-29 02:05 37 ****************** 9 2017-04-29 02:10 36 ***************** 10 2017-04-29 02:15 35 **************** 11 2017-04-29 02:20 35 **************** 12 2017-04-29 02:25 34 *************** ... ..( 6 skipped). .. *************** 19 2017-04-29 03:00 34 *************** 20 2017-04-29 03:05 33 ************** ... ..( 3 skipped). .. ************** 24 2017-04-29 03:25 33 ************** 25 2017-04-29 03:30 34 *************** ... ..( 26 skipped). .. *************** 52 2017-04-29 05:45 34 *************** 53 2017-04-29 05:50 35 **************** ... ..( 11 skipped). .. **************** 65 2017-04-29 06:50 35 **************** 66 2017-04-29 06:55 36 ***************** 67 2017-04-29 07:00 35 **************** ... ..( 5 skipped). .. **************** 73 2017-04-29 07:30 35 **************** 74 2017-04-29 07:35 36 ***************** 75 2017-04-29 07:40 35 **************** ... ..( 10 skipped). .. **************** 86 2017-04-29 08:35 35 **************** 87 2017-04-29 08:40 34 *************** 88 2017-04-29 08:45 33 ************** 89 2017-04-29 08:50 33 ************** 90 2017-04-29 08:55 21 ** 91 2017-04-29 09:00 24 ***** 92 2017-04-29 09:05 26 ******* 93 2017-04-29 09:10 27 ******** 94 2017-04-29 09:15 28 ********* 95 2017-04-29 09:20 29 ********** 96 2017-04-29 09:25 30 *********** 97 2017-04-29 09:30 30 *********** 98 2017-04-29 09:35 31 ************ 99 2017-04-29 09:40 31 ************ 100 2017-04-29 09:45 32 ************* ... ..( 2 skipped). .. ************* 103 2017-04-29 10:00 32 ************* 104 2017-04-29 10:05 33 ************** ... ..( 9 skipped). .. ************** 114 2017-04-29 10:55 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 1 Command failed due to ICRC error 0x0002 4 5 R_ERR response for data FIS 0x0003 4 5 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 1 R_ERR response for non-data FIS 0x0006 4 1 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 1 Device-to-host non-data FIS retries 0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 1 Vendor specific 0x8e01 4 6 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 1 Vendor specific 0x8e07 4 2 Vendor specific 0x8e08 4 6 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 26 Vendor specific 0x8e0b 4 1792 Vendor specific 0x8e0c 4 110 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 26 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 104 Vendor specific 0x8e11 4 6 Vendor specific |
From: Robert S <ro...@sp...> - 2017-04-29 18:25:13
|
Number 199 is indicating a problem. *USUALLY* it's cable related. Try replacing the sata cable and see if the raw value quits climbing. If you don't feel like playing with it, you can also change the sata port it's plugged into on the motherboard (or add-in card). On 4/29/2017 1:09 PM, al...@ai... wrote: > I've got a secondary (not 'boot' or 'root') drive attached in my system. > > It's "complaining" in boot logs, but seems to NOT have an issue reported by 'smartctl', and works OK after booting. > > I'd appreciate any ideas as to what the problem IS, or if there's really is one -- and what to do to fix it. Entirely poosible that I just don't understand what I'm seeing here :-/ > > On boot I see these messages, but the system ends up booted and functional -- including all the data on this drive, > > dmesg | egrep -i "ata2|ata-2" > [ 2.790815] ata2: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fff980 irq 22 > [ 3.273185] ata2: softreset failed (device not ready) > [ 3.276322] ata2: applying PMP SRST workaround and retrying > [ 3.456395] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 3.468932] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 > [ 3.471995] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > [ 3.488495] ata2.00: configured for UDMA/133 > [ 35.922130] ata2.00: exception Emask 0x0 SAct 0x20000000 SErr 0x80000 action 0x6 frozen > [ 35.926153] ata2: SError: { 10B8B } > [ 35.930101] ata2.00: failed command: READ FPDMA QUEUED > [ 35.934077] ata2.00: cmd 60/08:e8:00:00:00/00:00:00:00:00/40 tag 29 ncq dma 4096 in > [ 35.942198] ata2.00: status: { DRDY } > [ 35.946311] ata2: hard resetting link > [ 36.426065] ata2: softreset failed (device not ready) > [ 36.430247] ata2: applying PMP SRST workaround and retrying > [ 36.594063] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 36.603874] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) > [ 36.608124] ata2.00: revalidation failed (errno=-5) > [ 41.797584] ata2: hard resetting link > [ 42.277519] ata2: softreset failed (device not ready) > [ 42.281749] ata2: applying PMP SRST workaround and retrying > [ 42.445513] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 42.455368] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) > [ 42.459702] ata2.00: revalidation failed (errno=-5) > [ 42.464016] ata2: limiting SATA link speed to 1.5 Gbps > [ 47.685034] ata2: hard resetting link > [ 48.164970] ata2: softreset failed (device not ready) > [ 48.169275] ata2: applying PMP SRST workaround and retrying > [ 48.332964] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) > [ 48.348678] ata2.00: configured for UDMA/133 > [ 48.352981] ata2.00: device reported invalid CHS sector 0 > [ 48.357355] ata2: EH complete > > 'ata2' corresponds to /dev/sdb on my system > > find /dev/disk | egrep -i "ata2|ata-2" > /dev/disk/by-path/pci-0000:00:11.0-ata-2-part1 > /dev/disk/by-path/pci-0000:00:11.0-ata-2 > > ls -al `find /dev/disk | egrep -i "ata2|ata-2"` > lrwxrwxrwx 1 root root 9 Apr 29 10:50 /dev/disk/by-path/pci-0000:00:11.0-ata-2 -> ../../sdb > lrwxrwxrwx 1 root root 10 Apr 29 10:50 /dev/disk/by-path/pci-0000:00:11.0-ata-2-part1 -> ../../sdb1 > > Checking the smartctl data for that drive > > smartctl -H /dev/sdb > smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.10.13-2.ge5d11ce-default] (SUSE RPM) > Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > smartctl -x /dev/sdb > smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.10.13-2.ge5d11ce-default] (SUSE RPM) > Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org > > === START OF INFORMATION SECTION === > Model Family: SAMSUNG SpinPoint F3 > Device Model: SAMSUNG HD103SJ > Serial Number: S246J9EZC03669 > LU WWN Device Id: 5 0024e9 2042536ec > Firmware Version: 1AJ10001 > User Capacity: 1,000,204,886,016 bytes [1.00 TB] > Sector Size: 512 bytes logical/physical > Rotation Rate: 7200 rpm > Form Factor: 3.5 inches > Device is: In smartctl database [for details use: -P show] > ATA Version is: ATA8-ACS T13/1699-D revision 6 > SATA Version is: SATA 2.6, 3.0 Gb/s > Local Time is: Sat Apr 29 10:57:37 2017 PDT > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > AAM feature is: Disabled > APM feature is: Disabled > Rd look-ahead is: Enabled > Write cache is: Enabled > ATA Security is: Disabled, NOT FROZEN [SEC1] > Wt Cache Reorder: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x82) Offline data collection activity > was completed without error. > Auto Offline Data Collection: Enabled. > Self-test execution status: ( 0) The previous self-test routine completed > without error or no self-test has ever > been run. > Total time to complete Offline > data collection: ( 9360) seconds. > Offline data collection > capabilities: (0x5b) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 156) minutes. > SCT capabilities: (0x003f) SCT Status supported. > SCT Error Recovery Control supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE > 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 > 2 Throughput_Performance -OS--K 056 054 000 - 8531 > 3 Spin_Up_Time PO---K 075 069 025 - 7623 > 4 Start_Stop_Count -O--CK 098 098 000 - 2285 > 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 > 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 > 8 Seek_Time_Performance --S--K 252 252 015 - 0 > 9 Power_On_Hours -O--CK 100 100 000 - 27432 > 10 Spin_Retry_Count -O--CK 252 252 051 - 0 > 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 > 12 Power_Cycle_Count -O--CK 098 098 000 - 2236 > 191 G-Sense_Error_Rate -O---K 100 100 000 - 24 > 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 > 194 Temperature_Celsius -O---- 064 048 000 - 33 (Min/Max 15/52) > 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 > 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 > 197 Current_Pending_Sector -O--CK 252 252 000 - 0 > 198 Offline_Uncorrectable ----CK 252 252 000 - 0 > 199 UDMA_CRC_Error_Count -OS-CK 098 098 000 - 1162 > 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 0 > 223 Load_Retry_Count -O--CK 252 252 000 - 0 > 225 Load_Cycle_Count -O--CK 100 100 000 - 2301 > ||||||_ K auto-keep > |||||__ C event count > ||||___ R error rate > |||____ S speed/performance > ||_____ O updated online > |______ P prefailure warning > > General Purpose Log Directory Version 1 > SMART Log Directory Version 1 [multi-sector log support] > Address Access R/W Size Description > 0x00 GPL,SL R/O 1 Log Directory > 0x01 SL R/O 1 Summary SMART error log > 0x02 SL R/O 2 Comprehensive SMART error log > 0x03 GPL R/O 2 Ext. Comprehensive SMART error log > 0x06 SL R/O 1 SMART self-test log > 0x07 GPL R/O 2 Extended self-test log > 0x08 GPL R/O 2 Power Conditions log > 0x09 SL R/W 1 Selective self-test log > 0x10 GPL R/O 1 SATA NCQ Queued Error log > 0x11 GPL R/O 1 SATA Phy Event Counters log > 0x80-0x9f GPL,SL R/W 16 Host vendor specific log > 0xe0 GPL,SL R/W 1 SCT Command/Status > 0xe1 GPL,SL R/W 1 SCT Data Transfer > > SMART Extended Comprehensive Error Log Version: 1 (2 sectors) > Device Error Count: 1162 (device log contains only the most recent 8 errors) > CR = Command Register > FEATR = Features Register > COUNT = Count (was: Sector Count) Register > LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 > LH = LBA High (was: Cylinder High) Register ] LBA > LM = LBA Mid (was: Cylinder Low) Register ] Register > LL = LBA Low (was: Sector Number) Register ] > DV = Device (was: Device/Head) Register > DC = Device Control Register > ER = Error register > ST = Status register > Powered_Up_Time is measured from power on, and printed as > DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, > SS=sec, and sss=millisec. It "wraps" after 49.710 days. > > Error 1162 [1] occurred at disk power-on lifetime: 27432 hours (1143 days + 0 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER -- ST COUNT LBA_48 LH LM LL DV DC > -- -- -- == -- == == == -- -- -- -- -- > 84 -- 01 00 08 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 > > Commands leading to the command that caused the error were: > CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name > -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- > 60 00 00 00 08 00 00 00 00 00 00 40 00 00:00:00.000 READ FPDMA QUEUED > 60 00 10 00 08 00 00 00 00 00 00 40 08 00:00:00.044 READ FPDMA QUEUED > ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.043 SET FEATURES [Enable SATA feature] > 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.043 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] > ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.043 IDENTIFY DEVICE > > Error 1161 [0] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER -- ST COUNT LBA_48 LH LM LL DV DC > -- -- -- == -- == == == -- -- -- -- -- > 84 -- 01 00 08 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 > > Commands leading to the command that caused the error were: > CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name > -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- > 60 00 00 00 08 00 00 00 00 00 00 40 00 00:00:00.000 READ FPDMA QUEUED > 60 00 10 00 08 00 00 00 00 00 00 40 08 00:00:00.046 READ FPDMA QUEUED > ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.046 SET FEATURES [Enable SATA feature] > 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.046 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] > ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.046 IDENTIFY DEVICE > > Error 1160 [7] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER -- ST COUNT LBA_48 LH LM LL DV DC > -- -- -- == -- == == == -- -- -- -- -- > 84 -- 51 00 01 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 > > Commands leading to the command that caused the error were: > CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name > -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- > 25 20 20 00 01 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT > c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE > 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] > 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] > 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands] > > Error 1159 [6] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER -- ST COUNT LBA_48 LH LM LL DV DC > -- -- -- == -- == == == -- -- -- -- -- > 84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0 > > Commands leading to the command that caused the error were: > CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name > -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- > 25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT > c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE > 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] > 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] > 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands] > > Error 1158 [5] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER -- ST COUNT LBA_48 LH LM LL DV DC > -- -- -- == -- == == == -- -- -- -- -- > 84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0 > > Commands leading to the command that caused the error were: > CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name > -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- > 25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT > c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE > 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] > 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] > 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands] > > Error 1157 [4] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER -- ST COUNT LBA_48 LH LM LL DV DC > -- -- -- == -- == == == -- -- -- -- -- > 84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0 > > Commands leading to the command that caused the error were: > CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name > -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- > 25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT > 25 20 20 00 01 00 00 00 00 00 08 e0 00 00:00:00.036 READ DMA EXT > c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE > 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] > 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] > > Error 1156 [3] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER -- ST COUNT LBA_48 LH LM LL DV DC > -- -- -- == -- == == == -- -- -- -- -- > 84 -- 51 00 09 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 9 sectors at LBA = 0x00000000 = 0 > > Commands leading to the command that caused the error were: > CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name > -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- > 25 20 20 00 01 00 00 00 00 00 08 e0 00 00:00:00.036 READ DMA EXT > c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE > 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] > 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] > 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands] > > Error 1155 [2] occurred at disk power-on lifetime: 27431 hours (1142 days + 23 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER -- ST COUNT LBA_48 LH LM LL DV DC > -- -- -- == -- == == == -- -- -- -- -- > 84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0 > > Commands leading to the command that caused the error were: > CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name > -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- > 25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:00.036 READ DMA EXT > c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.036 SET MULTIPLE MODE > 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.036 INITIALIZE DEVICE PARAMETERS [OBS-6] > 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:00.036 RECALIBRATE [OBS-4] > 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.036 NOP [Abort queued commands] > > SMART Extended Self-test Log Version: 1 (2 sectors) > Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error > # 1 Short offline Completed without error 00% 4157 - > # 2 Short offline Completed without error 00% 4114 - > # 3 Extended offline Completed without error 00% 4073 - > # 4 Short offline Completed without error 00% 4056 - > # 5 Short offline Completed without error 00% 4011 - > # 6 Extended offline Completed without error 00% 3968 - > # 7 Short offline Completed without error 00% 3949 - > # 8 Short offline Completed without error 00% 3905 - > # 9 Extended offline Completed without error 00% 3903 - > #10 Short offline Completed without error 00% 3846 - > #11 Short offline Completed without error 00% 3801 - > #12 Extended offline Completed without error 00% 3761 - > #13 Short offline Completed without error 00% 3745 - > #14 Extended offline Completed without error 00% 3664 - > #15 Short offline Completed without error 00% 3646 - > #16 Short offline Completed without error 00% 3606 - > #17 Extended offline Completed without error 00% 3568 - > #18 Short offline Completed without error 00% 3552 - > #19 Short offline Completed without error 00% 3507 - > #20 Extended offline Completed without error 00% 3468 - > #21 Short offline Completed without error 00% 3451 - > > SMART Selective self-test log data structure revision number 0 > Note: revision number not 1 implies that no selective self-test has ever been run > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Completed [00% left] (0-65535) > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > > SCT Status Version: 2 > SCT Version (vendor specific): 256 (0x0100) > SCT Support Level: 1 > Device State: Active (0) > Current Temperature: 33 Celsius > Power Cycle Min/Max Temperature: 33/33 Celsius > Lifetime Min/Max Temperature: 18/65 Celsius > Under/Over Temperature Limit Count: 0/0 > > SCT Temperature History Version: 2 > Temperature Sampling Period: 5 minutes > Temperature Logging Interval: 5 minutes > Min/Max recommended Temperature: -5/80 Celsius > Min/Max Temperature Limit: -10/85 Celsius > Temperature History Size (Index): 128 (114) > > Index Estimated Time Temperature Celsius > 115 2017-04-29 00:20 32 ************* > ... ..( 5 skipped). .. ************* > 121 2017-04-29 00:50 32 ************* > 122 2017-04-29 00:55 34 *************** > 123 2017-04-29 01:00 36 ***************** > 124 2017-04-29 01:05 36 ***************** > 125 2017-04-29 01:10 37 ****************** > ... ..( 10 skipped). .. ****************** > 8 2017-04-29 02:05 37 ****************** > 9 2017-04-29 02:10 36 ***************** > 10 2017-04-29 02:15 35 **************** > 11 2017-04-29 02:20 35 **************** > 12 2017-04-29 02:25 34 *************** > ... ..( 6 skipped). .. *************** > 19 2017-04-29 03:00 34 *************** > 20 2017-04-29 03:05 33 ************** > ... ..( 3 skipped). .. ************** > 24 2017-04-29 03:25 33 ************** > 25 2017-04-29 03:30 34 *************** > ... ..( 26 skipped). .. *************** > 52 2017-04-29 05:45 34 *************** > 53 2017-04-29 05:50 35 **************** > ... ..( 11 skipped). .. **************** > 65 2017-04-29 06:50 35 **************** > 66 2017-04-29 06:55 36 ***************** > 67 2017-04-29 07:00 35 **************** > ... ..( 5 skipped). .. **************** > 73 2017-04-29 07:30 35 **************** > 74 2017-04-29 07:35 36 ***************** > 75 2017-04-29 07:40 35 **************** > ... ..( 10 skipped). .. **************** > 86 2017-04-29 08:35 35 **************** > 87 2017-04-29 08:40 34 *************** > 88 2017-04-29 08:45 33 ************** > 89 2017-04-29 08:50 33 ************** > 90 2017-04-29 08:55 21 ** > 91 2017-04-29 09:00 24 ***** > 92 2017-04-29 09:05 26 ******* > 93 2017-04-29 09:10 27 ******** > 94 2017-04-29 09:15 28 ********* > 95 2017-04-29 09:20 29 ********** > 96 2017-04-29 09:25 30 *********** > 97 2017-04-29 09:30 30 *********** > 98 2017-04-29 09:35 31 ************ > 99 2017-04-29 09:40 31 ************ > 100 2017-04-29 09:45 32 ************* > ... ..( 2 skipped). .. ************* > 103 2017-04-29 10:00 32 ************* > 104 2017-04-29 10:05 33 ************** > ... ..( 9 skipped). .. ************** > 114 2017-04-29 10:55 33 ************** > > SCT Error Recovery Control: > Read: Disabled > Write: Disabled > > Device Statistics (GP/SMART Log 0x04) not supported > > SATA Phy Event Counters (GP Log 0x11) > ID Size Value Description > 0x0001 4 1 Command failed due to ICRC error > 0x0002 4 5 R_ERR response for data FIS > 0x0003 4 5 R_ERR response for device-to-host data FIS > 0x0004 4 0 R_ERR response for host-to-device data FIS > 0x0005 4 1 R_ERR response for non-data FIS > 0x0006 4 1 R_ERR response for device-to-host non-data FIS > 0x0007 4 0 R_ERR response for host-to-device non-data FIS > 0x0008 4 1 Device-to-host non-data FIS retries > 0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy > 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET > 0x000b 4 0 CRC errors within host-to-device FIS > 0x000d 4 0 Non-CRC errors within host-to-device FIS > 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC > 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC > 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC > 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC > 0x8e00 4 1 Vendor specific > 0x8e01 4 6 Vendor specific > 0x8e02 4 0 Vendor specific > 0x8e03 4 0 Vendor specific > 0x8e04 4 0 Vendor specific > 0x8e05 4 0 Vendor specific > 0x8e06 4 1 Vendor specific > 0x8e07 4 2 Vendor specific > 0x8e08 4 6 Vendor specific > 0x8e09 4 0 Vendor specific > 0x8e0a 4 26 Vendor specific > 0x8e0b 4 1792 Vendor specific > 0x8e0c 4 110 Vendor specific > 0x8e0d 4 0 Vendor specific > 0x8e0e 4 26 Vendor specific > 0x8e0f 4 0 Vendor specific > 0x8e10 4 104 Vendor specific > 0x8e11 4 6 Vendor specific > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Smartmontools-support mailing list > Sma...@li... > https://lists.sourceforge.net/lists/listinfo/smartmontools-support |
From: <al...@ai...> - 2017-04-29 18:41:37
|
On Sat, Apr 29, 2017, at 11:25 AM, Robert S wrote: > Number 199 is indicating a problem. *USUALLY* it's cable related. Try > replacing the sata cable and see if the raw value quits climbing. If you > don't feel like playing with it, you can also change the sata port it's > plugged into on the motherboard (or add-in card). Wow. Nice call, I woulda never have found that! Never thought that a cable problem would allow the drive to boot and work afterwards ... Swapped the cable, and : dmesg | egrep -i "ata2|ata-2" [ 2.771065] ata2: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fffa80 irq 22 [ 3.259806] ata2: softreset failed (device not ready) [ 3.262990] ata2: applying PMP SRST workaround and retrying [ 3.439709] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.455067] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 3.458119] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.467512] ata2.00: configured for UDMA/133 Thanks a LOT! p.s. that "applying PMP SRST workaround and retrying" appears to be the kernel successfully working around a problem becuase of "CONFIG_SATA_PMP=y" in the kernel config. Not sure that I can do anything abt that without compiling the kernel with a different option. Or whether I need to. |
From: <ro...@sp...> - 2017-04-30 01:50:12
|
The problem is the data is getting corrupted in transit, some of the time. Kind of like a static phone call. Usually you can make out what they are saying, but not always. The CRC is catching those errors and the data is being re-transmitted. Hence if the problem is intermittent, the drive will still work, although slower. > > > On Sat, Apr 29, 2017, at 11:25 AM, Robert S wrote: >> Number 199 is indicating a problem. *USUALLY* it's cable related. Try >> replacing the sata cable and see if the raw value quits climbing. If you >> don't feel like playing with it, you can also change the sata port it's >> plugged into on the motherboard (or add-in card). > > Wow. Nice call, I woulda never have found that! Never thought that a > cable problem would allow the drive to boot and work afterwards ... > > Swapped the cable, and : > > dmesg | egrep -i "ata2|ata-2" > [ 2.771065] ata2: SATA max UDMA/133 abar m1024@0xf9fff800 port > 0xf9fffa80 irq 22 > [ 3.259806] ata2: softreset failed (device not ready) > [ 3.262990] ata2: applying PMP SRST workaround and retrying > [ 3.439709] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 3.455067] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 > [ 3.458119] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth > 31/32), AA > [ 3.467512] ata2.00: configured for UDMA/133 > > Thanks a LOT! > > p.s. that "applying PMP SRST workaround and retrying" appears to be the > kernel successfully working around a problem becuase of > "CONFIG_SATA_PMP=y" in the kernel config. Not sure that I can do anything > abt that without compiling the kernel with a different option. Or whether > I need to. > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Smartmontools-support mailing list > Sma...@li... > https://lists.sourceforge.net/lists/listinfo/smartmontools-support > |