From: Eduardo D. - G. <edi...@gm...> - 2007-11-19 09:43:41
|
Hi I have: smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Linux servidorisea 2.6.23.1.071110 servidorisea:/var/log# smartctl -a /dev/sde smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: SAMSUNG HD321KJ Serial Number: S0MQJ1PP409263 Firmware Version: CP100-10 User Capacity: 320,072,933,376 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Not recognized. Minor revision code: 0x52 Local Time is: Mon Nov 19 10:40:16 2007 CET ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details. SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (5709) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 97) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 569 3 Spin_Up_Time 0x0007 100 100 015 Pre-fail Always - 5568 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 57 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 12153 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2988 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 40 187 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 13631488 188 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0 190 Temperature_Celsius 0x0022 072 057 000 Old_age Always - 28 194 Temperature_Celsius 0x0022 154 109 000 Old_age Always - 28 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1026625238 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 098 000 Old_age Always - 2 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 2 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2979 - # 2 Short offline Completed without error 00% 2955 - # 3 Extended offline Completed without error 00% 2934 - # 4 Short offline Completed without error 00% 2907 - # 5 Short offline Completed without error 00% 2883 - # 6 Short offline Completed without error 00% 2859 - # 7 Short offline Completed without error 00% 2835 - # 8 Short offline Completed without error 00% 2811 - # 9 Short offline Completed without error 00% 2788 - #10 Short offline Completed without error 00% 2764 - #11 Extended offline Interrupted (host reset) 90% 2763 - #12 Short offline Completed without error 00% 2740 - #13 Short offline Completed without error 00% 2716 - #14 Short offline Completed without error 00% 2692 - #15 Short offline Completed without error 00% 2668 - #16 Short offline Completed without error 00% 2644 - #17 Short offline Completed without error 00% 2620 - #18 Extended offline Completed without error 00% 2604 - #19 Short offline Completed without error 00% 2572 - #20 Short offline Completed without error 00% 2548 - #21 Short offline Completed without error 00% 2524 - SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1 SMART Selective self-test log data structure revision number 0 Warning: ATA Specification requires selective self-test log data structure revision number = 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Recently I get this error. Nov 17 05:08:18 servidor smartd[3122]: Device: /dev/sdc, SMART Usage Attribute: 190 Temperature_Celsius changed from 74 to 75 Nov 17 05:08:19 servidor smartd[3122]: Device: /dev/sdd, SMART Usage Attribute: 190 Temperature_Celsius changed from 71 to 72 Nov 17 05:08:19 servidor smartd[3122]: Device: /dev/sde, SMART Usage Attribute: 190 Temperature_Celsius changed from 70 to 71 Nov 17 05:08:19 servidor smartd[3122]: Device: /dev/sde, new Self-Test Log error at hour timestamp 0 Nov 17 05:08:19 servidor smartd[3122]: Sending warning via mail to ed...@pk... ... Nov 17 05:08:19 servidor smartd[3122]: Warning via mail to ed...@pk...: successful Take note that I have 4 same disk and don't show any strange: servidorisea:/var/log# smartctl -a /dev/sda smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: SAMSUNG HD321KJ Serial Number: S0MQJ1PP409265 Firmware Version: CP100-10 User Capacity: 320,072,933,376 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Not recognized. Minor revision code: 0x52 Local Time is: Mon Nov 19 10:41:03 2007 CET ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details. SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (5876) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 1 3 Spin_Up_Time 0x0007 100 100 015 Pre-fail Always - 5568 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 55 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2991 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 253 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 38 187 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0 188 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0 190 Temperature_Celsius 0x0022 072 060 000 Old_age Always - 28 194 Temperature_Celsius 0x0022 154 118 000 Old_age Always - 28 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 451519333 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2983 - # 2 Short offline Completed without error 00% 2959 - # 3 Extended offline Completed without error 00% 2947 - # 4 Short offline Completed without error 00% 2911 - # 5 Short offline Completed without error 00% 2887 - # 6 Short offline Completed without error 00% 2863 - # 7 Short offline Completed without error 00% 2841 - # 8 Short offline Completed without error 00% 2815 - # 9 Short offline Completed without error 00% 2791 - #10 Short offline Completed without error 00% 2767 - #11 Extended offline Interrupted (host reset) 80% 2767 - #12 Short offline Completed without error 00% 2743 - #13 Short offline Completed without error 00% 2719 - #14 Short offline Completed without error 00% 2695 - #15 Short offline Completed without error 00% 2671 - #16 Short offline Completed without error 00% 2647 - #17 Short offline Completed without error 00% 2624 - #18 Extended offline Completed without error 00% 2605 - #19 Short offline Completed without error 00% 2575 - #20 Short offline Completed without error 00% 2551 - #21 Short offline Completed without error 00% 2527 - SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1 SMART Selective self-test log data structure revision number 0 Warning: ATA Specification requires selective self-test log data structure revision number = 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. I try to search in maillist, but I don't see any information. regards!! |
From: Justin P. <jp...@lu...> - 2007-11-21 19:38:12
|
On Mon, 19 Nov 2007, Eduardo Diaz - Gmail wrote: > Hi I have: > > smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen > Home page is http://smartmontools.sourceforge.net/ > Linux servidorisea 2.6.23.1.071110 > > servidorisea:/var/log# smartctl -a /dev/sde > smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen > Home page is http://smartmontools.sourceforge.net/ I've seen this as well and would also like to know, it does not appear to affect the disk at all (from my experience) but a rather annoying warning/error. Justin. |
From: Christian F. <Chr...@t-...> - 2007-11-30 20:23:16
|
Eduardo Diaz wrote: > Hi I have: > ... > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining > LifeTime(hours) LBA_of_first_error > # 1 Short offline Completed without error 00% > 2979 - > # 2 Short offline Completed without error 00% > 2955 - > ... > #21 Short offline Completed without error 00% > 2524 - > > ... > Recently I get this error. > > ... > Nov 17 05:08:19 servidor smartd[3122]: Device: /dev/sde, new Self-Test > Log error at hour timestamp 0 > Nov 17 05:08:19 servidor smartd[3122]: Sending warning via mail to ... > Nov 17 05:08:19 servidor smartd[3122]: Warning via mail to ...: successful > This warning message normally appears when a new error entry appeared in the log, but the total number of such entries did not increase. The message also appears when the last error entry was removed from the log. In this case, the message is actually misleading. Christian |