From: Jan S. <fi...@du...> - 2012-08-05 18:33:28
|
Dear all, I have successfully got smartctl to work with my TOSHIBA STOR.E ALU 2S (2.5" external hdd) using the parameter -d sat. What information do you need in order to add that device to the supported device list? Jan |
From: Christian F. <Chr...@t-...> - 2012-08-05 21:02:24
|
Jan Saalbach wrote: > Dear all, > I have successfully got smartctl to work with my TOSHIBA STOR.E ALU 2S > (2.5" external hdd) using the parameter -d sat. > > What information do you need in order to add that device to the > supported device list? > We need the USB Id. Running smartctl without -d sat should print it (on Linux, FreeBSD, Windows). Please also provide a "smartctl -x -q noserial" output of the drive itself. Thanks, Christian |
From: David L. <lio...@co...> - 2012-08-06 17:24:48
|
Seagate's ST33000650NS isn't listed in the smartctl database; is this enough information to add it? Dave On 8/5/12 2:02 PM, Christian Franke wrote: > provide a "smartctl -x -q noserial" output of the drive itself. root@kali:~# smartctl -x -q noserial /dev/sdd smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST33000650NS Firmware Version: 0004 User Capacity: 3,000,592,982,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Aug 6 10:18:24 2012 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activityWrote 4 lines ] Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 078 063 044 Pre-fail Always - 81200813 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 071 060 030 Pre-fail Always - 13636886 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1190 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 3 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 072 067 045 Old_age Always - 28 (Lifetime Min/Max 20/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 194 Temperature_Celsius 0x0022 028 040 000 Old_age Always - 28 (0 19 0 0) 195 Hardware_ECC_Recovered 0x001a 032 007 000 Old_age Always - 81200813 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] GP/S Log at address 0x08 has 2 sectors [Reserved] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP Log at address 0x21 has 1 sectors [Write stream error log] GP Log at address 0x22 has 1 sectors [Read stream error log] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa1 has 20 sectors [Device vendor specific log] GP Log at address 0xa2 has 4496 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 129 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP Log at address 0xb0 has 5176 sectors [Device vendor specific log] GP Log at address 0xbd has 252 sectors [Device vendor specific log] GP Log at address 0xbe has 65535 sectors [Device vendor specific log] GP Log at address 0xbf has 65535 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 20/33 Celsius Lifetime Min/Max Temperature: 19/33 Celsius Under/Over Temperature Limit Count: 0/7028 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (106) Index Estimated Time Temperature Celsius 107 2012-08-05 13:00 26 ******* ... ..( 2 skipped). .. ******* 110 2012-08-05 13:30 26 ******* 111 2012-08-05 13:40 27 ******** ... ..( 4 skipped). .. ******** 116 2012-08-05 14:30 27 ******** 117 2012-08-05 14:40 28 ********* 118 2012-08-05 14:50 28 ********* 119 2012-08-05 15:00 27 ******** 120 2012-08-05 15:10 28 ********* ... ..( 12 skipped). .. ********* 5 2012-08-05 17:20 28 ********* 6 2012-08-05 17:30 27 ******** 7 2012-08-05 17:40 28 ********* 8 2012-08-05 17:50 28 ********* 9 2012-08-05 18:00 29 ********** 10 2012-08-05 18:10 28 ********* ... ..( 6 skipped). .. ********* 17 2012-08-05 19:20 28 ********* 18 2012-08-05 19:30 27 ******** ... ..( 2 skipped). .. ******** 21 2012-08-05 20:00 27 ******** 22 2012-08-05 20:10 26 ******* ... ..( 5 skipped). .. ******* 28 2012-08-05 21:10 26 ******* 29 2012-08-05 21:20 25 ****** ... ..( 12 skipped). .. ****** 42 2012-08-05 23:30 25 ****** 43 2012-08-05 23:40 24 ***** 44 2012-08-05 23:50 24 ***** 45 2012-08-06 00:00 25 ****** 46 2012-08-06 00:10 24 ***** ... ..( 22 skipped). .. ***** 69 2012-08-06 04:00 24 ***** 70 2012-08-06 04:10 23 **** 71 2012-08-06 04:20 24 ***** ... ..( 3 skipped). .. ***** 75 2012-08-06 05:00 24 ***** 76 2012-08-06 05:10 23 **** 77 2012-08-06 05:20 23 **** 78 2012-08-06 05:30 23 **** 79 2012-08-06 05:40 24 ***** 80 2012-08-06 05:50 23 **** 81 2012-08-06 06:00 24 ***** 82 2012-08-06 06:10 23 **** ... ..( 2 skipped). .. **** 85 2012-08-06 06:40 23 **** 86 2012-08-06 06:50 24 ***** ... ..( 3 skipped). .. ***** 90 2012-08-06 07:30 24 ***** 91 2012-08-06 07:40 25 ****** ... ..( 2 skipped). .. ****** 94 2012-08-06 08:10 25 ****** 95 2012-08-06 08:20 26 ******* ... ..( 2 skipped). .. ******* 98 2012-08-06 08:50 26 ******* 99 2012-08-06 09:00 27 ******** ... ..( 4 skipped). .. ******** 104 2012-08-06 09:50 27 ******** 105 2012-08-06 10:00 28 ********* 106 2012-08-06 10:10 28 ********* SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
From: Jan S. <fi...@du...> - 2012-08-06 17:50:12
|
> We need the USB Id. Running smartctl without -d sat should print it (on > Linux, FreeBSD, Windows). Unknown USB bridge [0x0930:0x0b1a (0x001)] > Please also provide a "smartctl -x -q noserial" output of the drive itself. $ sudo smartctl -x -q noserial -d sat /dev/sdc smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.32-41-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: TOSHIBA MQ01ABD100 Firmware Version: AX001U User Capacity: 1.000.204.886.016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Aug 6 19:44:56 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled Regards Jan |
From: Alex S. <ml...@os...> - 2012-08-06 19:21:58
|
On 08/06/2012 07:25 PM, David Liontooth wrote: > Seagate's ST33000650NS isn't listed in the smartctl database; is this > enough information to add it? > > Dave > > You are using outdated drivedb.h - i see record for this drive in the current DB. |
From: David L. <lio...@co...> - 2012-08-06 19:41:22
|
Thanks; I thought that might be the case. Is there a way to keep the drivedb.h updated -- along the lines of update-pciids? -- without having to upgrade or reinstall the whole package? These are production machines and adequately supported by the older version of smartmontools. Dave On 8/6/12 12:21 PM, Alex Samorukov wrote: > On 08/06/2012 07:25 PM, David Liontooth wrote: >> Seagate's ST33000650NS isn't listed in the smartctl database; is this >> enough information to add it? >> >> Dave >> >> > You are using outdated drivedb.h - i see record for this drive in the > current DB. |
From: Christian F. <Chr...@t-...> - 2012-08-06 19:53:42
|
David Liontooth wrote: > Thanks; I thought that might be the case. Is there a way to keep the > drivedb.h updated -- along the lines of update-pciids? -- without having > to upgrade or reinstall the whole package? These are production machines > and adequately supported by the older version of smartmontools. The script /usr/sbin/update-smart-drivedb was added in smartmontools 5.40. Christian |
From: David L. <lio...@co...> - 2012-08-06 20:04:53
|
On 8/6/12 12:53 PM, Christian Franke wrote: > David Liontooth wrote: >> Thanks; I thought that might be the case. Is there a way to keep the >> drivedb.h updated -- along the lines of update-pciids? -- without having >> to upgrade or reinstall the whole package? These are production machines >> and adequately supported by the older version of smartmontools. > > The script /usr/sbin/update-smart-drivedb was added in smartmontools > 5.40. > > Christian > Very cool, thanks for fantastic work! # update-smart-drivedb /usr/share/smartmontools/drivedb.h updated from trunk |