I have subject IDE USB enclosure that doesn't appear to work (yet).
lsusb output is attached.
The closest -d option I get is:
[root@... ~]# smartctl -d sat -i /dev/sda
smartctl 5.39 2009-09-12 r2910 [i686-redhat-linux-gnu] (local build)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 1
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Sep 23 19:13:48 2009 MST
SMART is only available in ATA Version 3 Revision 3 or greater.
We will try to proceed in spite of this.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show
if SMART supported.
A mandatory SMART command failed: exiting. To continue, add one or more
'-T permissive' options.
This is a little weird, because the enclosure is Acomdata model
HDEUHE-504 (http://www.acomdata.com/504.asp). I'm not sure why lsusb
isn't showing Acomdata as the manufacturer. Note, this is for PATA, not
From: Christian Franke <Christian.Franke@t-...> - 2009-09-24 19:51:39
Eric Shubert wrote:
> I have subject IDE USB enclosure that doesn't appear to work (yet).
> lsusb output is attached.
> This is a little weird, because the enclosure is Acomdata model
> HDEUHE-504 (http://www.acomdata.com/504.asp). I'm not sure why lsusb
> isn't showing Acomdata as the manufacturer. Note, this is for PATA,
> not SATA devices.
> Any insights?
Device looks like a DuraMicro 504 (http://www.duramicro.com/504.html)
but this is a newer (SATA) device.
Probably an older model and at that time AcomData/DuraMicro had no own
USB-ID. It is typical that the default ID from the USB chip manufacturer
is used then.
Info added to wiki. I will also add it as unsupported to the USB table.
Get latest updates about Open Source Projects, Conferences and News.