Screenshot instructions:
Windows
Mac
Red Hat Linux
Ubuntu
Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)
|
From: Steven Samuel Cole <steven.samuel.cole@gm...> - 2008-06-22 05:34:13
|
Hello,
I see an error message every time I boot my AMD64 FreeBSD 7.0 system or
when I restart smartd. These are the dmesg lines that seem relevant to
the issue (shortened for clarity):
kernel: FreeBSD 7.0-RELEASE #0: Fri Jun 6 22:06:44 NZST 2008
kernel: CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2611.86-MHz
K8-class CPU)
kernel: Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
kernel: usable memory = 8576704512 (8179 MB)
...
kernel: atapci2: <SiI SiI 3114 SATA150 controller> port
0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f
mem 0xddeff400-0xddeff7ff irq 18 at device 10.0 on pci1
...
kernel: ata6: <ATA channel 0> on atapci2
kernel: ata7: <ATA channel 1> on atapci2
kernel: ata8: <ATA channel 2> on atapci2
kernel: ata9: <ATA channel 3> on atapci2
...
kernel: ad12: 476940MB <Seagate ST3500320AS SD15> at ata6-master SATA150
kernel: ad14: 476940MB <Seagate ST3500320AS SD15> at ata7-master SATA150
kernel: ad16: 476940MB <Seagate ST3500320AS SD15> at ata8-master SATA150
kernel: ad18: 476940MB <Seagate ST3500320AS SD15> at ata9-master SATA150
I am happy to provide more info if that helps.
I am using the latest version of smartmontools (5.38).
The actual error messages are:
kernel: ad12: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED>
kernel: ad14: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED>
kernel: ad16: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED>
kernel: ad18: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED>
Apart from that, the disks seem to be working fine.
I am running a ZFS pool on them and they perform great, no worries
whatsoever; I am simply unsure what these error messages mean and if
they should worry me.
Thank you very much for your attention.
Kind regards,
Steve
|
|
From: Bruce Allen <ballen@gr...> - 2008-06-23 07:01:35
|
Steven, Does 'smartctl' run and give sensible output? Who is the FreeBSD port maintainer? Cheers, Bruce On Sun, 22 Jun 2008, Steven Samuel Cole wrote: > Hello, > > I see an error message every time I boot my AMD64 FreeBSD 7.0 system or > when I restart smartd. These are the dmesg lines that seem relevant to > the issue (shortened for clarity): > > kernel: FreeBSD 7.0-RELEASE #0: Fri Jun 6 22:06:44 NZST 2008 > kernel: CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2611.86-MHz > K8-class CPU) > kernel: Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2 > kernel: usable memory = 8576704512 (8179 MB) > ... > kernel: atapci2: <SiI SiI 3114 SATA150 controller> port > 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f > mem 0xddeff400-0xddeff7ff irq 18 at device 10.0 on pci1 > ... > kernel: ata6: <ATA channel 0> on atapci2 > kernel: ata7: <ATA channel 1> on atapci2 > kernel: ata8: <ATA channel 2> on atapci2 > kernel: ata9: <ATA channel 3> on atapci2 > ... > kernel: ad12: 476940MB <Seagate ST3500320AS SD15> at ata6-master SATA150 > kernel: ad14: 476940MB <Seagate ST3500320AS SD15> at ata7-master SATA150 > kernel: ad16: 476940MB <Seagate ST3500320AS SD15> at ata8-master SATA150 > kernel: ad18: 476940MB <Seagate ST3500320AS SD15> at ata9-master SATA150 > > I am happy to provide more info if that helps. > I am using the latest version of smartmontools (5.38). > > The actual error messages are: > > kernel: ad12: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> > kernel: ad14: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> > kernel: ad16: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> > kernel: ad18: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> > > Apart from that, the disks seem to be working fine. > I am running a ZFS pool on them and they perform great, no worries > whatsoever; I am simply unsure what these error messages mean and if > they should worry me. > > Thank you very much for your attention. > > Kind regards, > > Steve > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Smartmontools-support mailing list > Smartmontools-support@... > https://lists.sourceforge.net/lists/listinfo/smartmontools-support > |
|
From: Steven Samuel Cole <steven.samuel.cole@gm...> - 2008-06-23 23:22:16
|
Bruce, thanks for you reply :-) I can do e.g. smartctl -a /dev/ad0 and get sensible output, also the scheduled tests are executed on the harddrives, according to the output. I remember I used to get occasional messages in the system log about e.g. the temperature changing and I don't get these anymore since I put in the HDs that cause the error message. I contacted the port maintainer as well. Cheers, Steve Bruce Allen schrieb: > Steven, > > Does 'smartctl' run and give sensible output? Who is the FreeBSD port > maintainer? > > Cheers, > Bruce > > > On Sun, 22 Jun 2008, Steven Samuel Cole wrote: > >> Hello, >> >> I see an error message every time I boot my AMD64 FreeBSD 7.0 system or >> when I restart smartd. These are the dmesg lines that seem relevant to >> the issue (shortened for clarity): >> >> kernel: FreeBSD 7.0-RELEASE #0: Fri Jun 6 22:06:44 NZST 2008 >> kernel: CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2611.86-MHz >> K8-class CPU) >> kernel: Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2 >> kernel: usable memory = 8576704512 (8179 MB) >> ... >> kernel: atapci2: <SiI SiI 3114 SATA150 controller> port >> 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f >> mem 0xddeff400-0xddeff7ff irq 18 at device 10.0 on pci1 >> ... >> kernel: ata6: <ATA channel 0> on atapci2 >> kernel: ata7: <ATA channel 1> on atapci2 >> kernel: ata8: <ATA channel 2> on atapci2 >> kernel: ata9: <ATA channel 3> on atapci2 >> ... >> kernel: ad12: 476940MB <Seagate ST3500320AS SD15> at ata6-master SATA150 >> kernel: ad14: 476940MB <Seagate ST3500320AS SD15> at ata7-master SATA150 >> kernel: ad16: 476940MB <Seagate ST3500320AS SD15> at ata8-master SATA150 >> kernel: ad18: 476940MB <Seagate ST3500320AS SD15> at ata9-master SATA150 >> >> I am happy to provide more info if that helps. >> I am using the latest version of smartmontools (5.38). >> >> The actual error messages are: >> >> kernel: ad12: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> >> kernel: ad14: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> >> kernel: ad16: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> >> kernel: ad18: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> >> >> Apart from that, the disks seem to be working fine. >> I am running a ZFS pool on them and they perform great, no worries >> whatsoever; I am simply unsure what these error messages mean and if >> they should worry me. >> >> Thank you very much for your attention. >> >> Kind regards, >> >> Steve >> >> ------------------------------------------------------------------------- >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> Smartmontools-support mailing list >> Smartmontools-support@... >> https://lists.sourceforge.net/lists/listinfo/smartmontools-support >> |
|
From: Bruce Allen <ballen@gr...> - 2008-06-24 09:09:42
|
Hi Steven, If smartctl works correctly but smartd is misbehaving, then someone with access to a misbehaving systems needs to compile smartd for debugging and start it up under a debugger to see what is going wrong. If smartctl works then whatever is wrong with smartd should be easy to fix. Cheers, Bruce On Tue, 24 Jun 2008, Steven Samuel Cole wrote: > Bruce, > > thanks for you reply :-) > > I can do e.g. smartctl -a /dev/ad0 and get sensible output, also the > scheduled tests are executed on the harddrives, according to the output. > > I remember I used to get occasional messages in the system log about > e.g. the temperature changing and I don't get these anymore since I put > in the HDs that cause the error message. > > I contacted the port maintainer as well. > > Cheers, > > Steve > > Bruce Allen schrieb: >> Steven, >> >> Does 'smartctl' run and give sensible output? Who is the FreeBSD port >> maintainer? >> >> Cheers, >> Bruce >> >> >> On Sun, 22 Jun 2008, Steven Samuel Cole wrote: >> >>> Hello, >>> >>> I see an error message every time I boot my AMD64 FreeBSD 7.0 system or >>> when I restart smartd. These are the dmesg lines that seem relevant to >>> the issue (shortened for clarity): >>> >>> kernel: FreeBSD 7.0-RELEASE #0: Fri Jun 6 22:06:44 NZST 2008 >>> kernel: CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2611.86-MHz >>> K8-class CPU) >>> kernel: Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2 >>> kernel: usable memory = 8576704512 (8179 MB) >>> ... >>> kernel: atapci2: <SiI SiI 3114 SATA150 controller> port >>> 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f >>> mem 0xddeff400-0xddeff7ff irq 18 at device 10.0 on pci1 >>> ... >>> kernel: ata6: <ATA channel 0> on atapci2 >>> kernel: ata7: <ATA channel 1> on atapci2 >>> kernel: ata8: <ATA channel 2> on atapci2 >>> kernel: ata9: <ATA channel 3> on atapci2 >>> ... >>> kernel: ad12: 476940MB <Seagate ST3500320AS SD15> at ata6-master SATA150 >>> kernel: ad14: 476940MB <Seagate ST3500320AS SD15> at ata7-master SATA150 >>> kernel: ad16: 476940MB <Seagate ST3500320AS SD15> at ata8-master SATA150 >>> kernel: ad18: 476940MB <Seagate ST3500320AS SD15> at ata9-master SATA150 >>> >>> I am happy to provide more info if that helps. >>> I am using the latest version of smartmontools (5.38). >>> >>> The actual error messages are: >>> >>> kernel: ad12: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> >>> kernel: ad14: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> >>> kernel: ad16: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> >>> kernel: ad18: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED> >>> >>> Apart from that, the disks seem to be working fine. >>> I am running a ZFS pool on them and they perform great, no worries >>> whatsoever; I am simply unsure what these error messages mean and if >>> they should worry me. >>> >>> Thank you very much for your attention. >>> >>> Kind regards, >>> >>> Steve >>> >>> ------------------------------------------------------------------------- >>> Check out the new SourceForge.net Marketplace. >>> It's the best place to buy or sell services for >>> just about anything Open Source. >>> http://sourceforge.net/services/buy/index.php >>> _______________________________________________ >>> Smartmontools-support mailing list >>> Smartmontools-support@... >>> https://lists.sourceforge.net/lists/listinfo/smartmontools-support >>> > > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Smartmontools-support mailing list > Smartmontools-support@... > https://lists.sourceforge.net/lists/listinfo/smartmontools-support > |