smartmontools-support

Re: [smartmontools-support] GSmartControl 0.9.0 released

[Orsiris de J. <oz...@ne...>]

Hello Alexander,



Congratulations for the new version of your tool, really looks steamlined :)

I just ran it on my Win10 x64 with an nvme and an ssd disk.



The NVME disk is detected, but output is limited:

smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win10(64)] (sf-6.5-1)

Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org



=== START OF INFORMATION SECTION ===
Vendor:               NVMe
Product:              Samsung SSD 950
Revision:             2B0Q
Compliance:           SPC-4
LU is resource provisioned, LBPRZ=1
Rotation Rate:        Solid State Device
Logical Unit id:      YYYYYYYYYYYYYYYYYYYYY 2B0Q
Serial number:      XXXXXXXXXXXXXXXXXXX
Device type:          disk
Local Time is:        Thu May 11 11:34:15 2017 PM
SMART support is:     Available - device has SMART capability.
SMART support is:     Disabled
Temperature Warning:  Disabled or Not Supported

=== START OF READ SMART DATA SECTION ===
Request Sense failed, [Input/output error]
Current Drive Temperature:     51 C
Drive Trip Temperature:        80 C

Error Counter logging not supported


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging

 ------------------------------
 Doing the same with smartctl -a /dev/nvme0
 C:\Program Files\smartmontools\bin>smartctl -a /dev/nvme0
smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win10] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Samsung SSD 950 PRO 256GB
Serial Number:                      XXXXXXXXXXXXXXXXXXX
Firmware Version:                   2B0QBXX7
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Controller ID:                      1
Number of Namespaces:               1
Namespace 1 Size/Capacity:          256 060 514 304 [256 GB]
Namespace 1 Utilization:            153 960 095 744 [153 GB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Thu May 11 11:35:11 2017 PM
Firmware Updates (0x06):            3 Slots
Optional Admin Commands (0x0007):   Security Format Frmw_DL
Optional NVM Commands (0x001f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Maximum Data Transfer Size:         32 Pages

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     6.50W       -        -    0  0  0  0        5       5
 1 +     5.80W       -        -    1  1  1  1       30      30
 2 +     3.60W       -        -    2  2  2  2      100     100
 3 -   0.0700W       -        -    3  3  3  3      500    5000
 4 -   0.0050W       -        -    4  4  4  4     2000   22000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
Critical Warning:                   0x00
Temperature:                        51 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    0%
Data Units Read:                    8 802 764 [4,50 TB]
Data Units Written:                 8 100 637 [4,14 TB]
Host Read Commands:                 163 470 567
Host Write Commands:                207 549 906
Controller Busy Time:               879
Power Cycles:                       1 846
Power On Hours:                     3 551
Unsafe Shutdowns:                   210
Media and Data Integrity Errors:    0
Error Information Log Entries:      97

Error Information (NVMe Log 0x01, max 64 entries)
Num   ErrCount  SQId   CmdId  Status  PELoc          LBA  NSID    VS
  0         97     0  0x001d  0x4004  0x000            0     0     -
  1         96     0  0x001c  0x4004  0x000            0     0     -
  2         95     0  0x001d  0x4004  0x000            0     0     -
  3         94     0  0x001c  0x4004  0x000            0     0     -
  4         93     0  0x001d  0x4004  0x000            0     0     -
  5         92     0  0x001c  0x4004  0x000            0     0     -
  6         91     0  0x001f  0x4004  0x000            0     0     -
  7         90     0  0x001e  0x4004  0x000            0     0     -
  8         89     0  0x001f  0x4004  0x000            0     0     -
  9         88     0  0x001e  0x4004  0x000            0     0     -
 10         87     0  0x001d  0x4004  0x000            0     0     -
 11         86     0  0x001c  0x4004  0x000            0     0     -
 12         85     0  0x001d  0x4004  0x000            0     0     -
 13         84     0  0x001c  0x4004  0x000            0     0     -
 14         83     0  0x001d  0x4004  0x000            0     0     -
 15         82     0  0x001c  0x4004  0x000            0     0     -
... (48 entries not shown)
I've seen that smartctl --scan can't really find nvme devices as of v6.5.

Is there a chance to run a pseudo code loop like



for i in {0..15}; do 

    smartctl -a /dev/nvme$i

    if [$! == 0]; then device_exists+=$i; fi

done



This would allow to detect those devices and get nvme output.



Btw, the berlios.de link didn't work for me, had to go to sourceforge.



Best regards,



Orsiris de Jong

oz...@ne... - http://www.netpower.fr <http://www.netpower.fr> 

Tel: 06 75 40 48 41

-----Message initial-----
De: Alexander Shaduri <ash...@gm...>
Envoyé: jeudi 11 mai 2017 11:27
À: sma...@li...
Sujet: [smartmontools-support] GSmartControl 0.9.0 released



Hello all,

It's been a long while since the last release, but here it is:
I just released GSmartControl 0.9.0 (a GUI for smartctl), you may find
it at http://gsmartcontrol.berlios.de .

Changes include:

Implemented (untested) support for Linux-based Areca controllers with
enclosures.
Implemented (untested) support for Windows-based Areca controllers (thanks
to Richard Kagerer).
Implemented (untested) support for Linux-based HP controllers with cciss
and hpsa/hpahcisr drivers (thanks to Fabrice Bacchella).
Changes in Preferences no longer fail silently until rescan/restart.
Better drive detection under Windows after removable drives are detached.
Windows version is no longer marked as "dpi aware" since it's not
supported that well.
Drive attribute descriptions have been updated (including clarifications
for SSDs).
Added support for SSD-only and HDD-only vendor attributes.
Devices having only basic info can be displayed now in the info window.
Fixed BDRW drive detection (it was detected as a HDD).
Other minor improvements.
A number of issues have been fixed (including a crash).

Any help with testing is really appreciated.

Thanks,
Alexander

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Smartmontools-support mailing list
Sma...@li...
https://lists.sourceforge.net/lists/listinfo/smartmontools-support

Re: [smartmontools-support] GSmartControl 0.9.0 released

[Alexander S. <ash...@gm...>]

Hi Orsiris,

Thanks for testing it, I'm glad you like it.

The NVME drive seems to be treated like an SCSI drive by smartctl
(that is, the output is somewhat free-form, unlike (S)ATA drives, where
the output is "standardized").
Unfortunately, GSmartControl doesn't support such drives (yet), so
it doesn't make much sense to detect them.

Thanks,
Alexander


On Thu, 11 May 2017 11:54:04 +0200
Orsiris de Jong wrote:

> Hello Alexander,
> 
> 
> 
> Congratulations for the new version of your tool, really looks
> steamlined :)
> 
> I just ran it on my Win10 x64 with an nvme and an ssd disk.
> 
> 
> 
> The NVME disk is detected, but output is limited:
> 
> smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win10(64)] (sf-6.5-1)
> 
> Copyright (C) 2002-16, Bruce Allen, Christian Franke,
> www.smartmontools.org
> 
> 
> 
> === START OF INFORMATION SECTION ===
> Vendor:               NVMe
> Product:              Samsung SSD 950
> Revision:             2B0Q
> Compliance:           SPC-4
> LU is resource provisioned, LBPRZ=1
> Rotation Rate:        Solid State Device
> Logical Unit id:      YYYYYYYYYYYYYYYYYYYYY 2B0Q
> Serial number:      XXXXXXXXXXXXXXXXXXX
> Device type:          disk
> Local Time is:        Thu May 11 11:34:15 2017 PM
> SMART support is:     Available - device has SMART capability.
> SMART support is:     Disabled
> Temperature Warning:  Disabled or Not Supported
> 
> === START OF READ SMART DATA SECTION ===
> Request Sense failed, [Input/output error]
> Current Drive Temperature:     51 C
> Drive Trip Temperature:        80 C
> 
> Error Counter logging not supported
> 
> 
> [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S
> on'] Device does not support Self Test logging
> 
>  ------------------------------
>  Doing the same with smartctl -a /dev/nvme0
>  C:\Program Files\smartmontools\bin>smartctl -a /dev/nvme0
> smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win10] (sf-6.5-1)
> Copyright (C) 2002-16, Bruce Allen, Christian Franke,
> www.smartmontools.org
> 
> === START OF INFORMATION SECTION ===
> Model Number:                       Samsung SSD 950 PRO 256GB
> Serial Number:                      XXXXXXXXXXXXXXXXXXX
> Firmware Version:                   2B0QBXX7
> PCI Vendor/Subsystem ID:            0x144d
> IEEE OUI Identifier:                0x002538
> Controller ID:                      1
> Number of Namespaces:               1
> Namespace 1 Size/Capacity:          256 060 514 304 [256 GB]
> Namespace 1 Utilization:            153 960 095 744 [153 GB]
> Namespace 1 Formatted LBA Size:     512
> Local Time is:                      Thu May 11 11:35:11 2017 PM
> Firmware Updates (0x06):            3 Slots
> Optional Admin Commands (0x0007):   Security Format Frmw_DL
> Optional NVM Commands (0x001f):     Comp Wr_Unc DS_Mngmt Wr_Zero
> Sav/Sel_Feat Maximum Data Transfer Size:         32 Pages
> 
> Supported Power States
> St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
>  0 +     6.50W       -        -    0  0  0  0        5       5
>  1 +     5.80W       -        -    1  1  1  1       30      30
>  2 +     3.60W       -        -    2  2  2  2      100     100
>  3 -   0.0700W       -        -    3  3  3  3      500    5000
>  4 -   0.0050W       -        -    4  4  4  4     2000   22000
> 
> Supported LBA Sizes (NSID 0x1)
> Id Fmt  Data  Metadt  Rel_Perf
>  0 +     512       0         0
> 
> === START OF SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
> 
> SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
> Critical Warning:                   0x00
> Temperature:                        51 Celsius
> Available Spare:                    100%
> Available Spare Threshold:          10%
> Percentage Used:                    0%
> Data Units Read:                    8 802 764 [4,50 TB]
> Data Units Written:                 8 100 637 [4,14 TB]
> Host Read Commands:                 163 470 567
> Host Write Commands:                207 549 906
> Controller Busy Time:               879
> Power Cycles:                       1 846
> Power On Hours:                     3 551
> Unsafe Shutdowns:                   210
> Media and Data Integrity Errors:    0
> Error Information Log Entries:      97
> 
> Error Information (NVMe Log 0x01, max 64 entries)
> Num   ErrCount  SQId   CmdId  Status  PELoc          LBA  NSID    VS
>   0         97     0  0x001d  0x4004  0x000            0     0     -
>   1         96     0  0x001c  0x4004  0x000            0     0     -
>   2         95     0  0x001d  0x4004  0x000            0     0     -
>   3         94     0  0x001c  0x4004  0x000            0     0     -
>   4         93     0  0x001d  0x4004  0x000            0     0     -
>   5         92     0  0x001c  0x4004  0x000            0     0     -
>   6         91     0  0x001f  0x4004  0x000            0     0     -
>   7         90     0  0x001e  0x4004  0x000            0     0     -
>   8         89     0  0x001f  0x4004  0x000            0     0     -
>   9         88     0  0x001e  0x4004  0x000            0     0     -
>  10         87     0  0x001d  0x4004  0x000            0     0     -
>  11         86     0  0x001c  0x4004  0x000            0     0     -
>  12         85     0  0x001d  0x4004  0x000            0     0     -
>  13         84     0  0x001c  0x4004  0x000            0     0     -
>  14         83     0  0x001d  0x4004  0x000            0     0     -
>  15         82     0  0x001c  0x4004  0x000            0     0     -
> ... (48 entries not shown)
> I've seen that smartctl --scan can't really find nvme devices as of
> v6.5.
> 
> Is there a chance to run a pseudo code loop like
> 
> 
> 
> for i in {0..15}; do 
> 
>     smartctl -a /dev/nvme$i
> 
>     if [$! == 0]; then device_exists+=$i; fi
> 
> done
> 
> 
> 
> This would allow to detect those devices and get nvme output.
> 
> 
> 
> Btw, the berlios.de link didn't work for me, had to go to sourceforge.
> 
> 
> 
> Best regards,
> 
> 
> 
> Orsiris de Jong
> 
> oz...@ne... - http://www.netpower.fr <http://www.netpower.fr> 
> 
> Tel: 06 75 40 48 41