Re: [smartmontools-support]3ware 8006-2LP, smartctl, Hitachi Deskstar 80GB (7200rpm)

[Bruce A. <ba...@gr...>]

Please try -d 3ware,0 and -d 3ware,1

On Wed, 26 Apr 2006, Gerwin van de Steeg wrote:

> Bruce Allen wrote:
>
> I am trying to retrieve SMART informaton from a Hitachi Deskstart, connected 
> to a 3ware 8006-2LP.
> I'm using linux 2.6.15, have the latest firmware and BIOS for the 3ware 
> controller, yet still unable to retrieve the SMART information using 
> smartctl.
>
> :~/3ware_cli# smartctl -a -T permissive -T permissive -T permissive -d 
> 3ware,2 /dev/twe0
> smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> WARNING - NO DEVICE FOUND ON 3WARE CONTROLLER (disk 2)
> Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)
>
> === START OF INFORMATION SECTION ===
> Device Model:     [No Information Found]
> Serial Number:    [No Information Found]
> Firmware Version: [No Information Found]
> Device is:        Not in smartctl database [for details use: -P showall]
> ATA Version is:   1
> ATA Standard is:  Exact ATA specification draft version not indicated
> Local Time is:    Wed Apr 26 09:40:52 2006 NZST
> SMART is only available in ATA Version 3 Revision 3 or greater.
> We will try to proceed in spite of this.
> SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if 
> SMART supported.
>                 Checking for SMART support by trying SMART ENABLE command.
> Error SMART Enable failed: Inappropriate ioctl for device
>                 SMART ENABLE failed - this establishes that this device 
> lacks SMART functionality.
> SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if 
> SMART is enabled.
> A mandatory SMART command failed: exiting. To continue, add one or more '-T 
> permissive' options.
>
>
> However, i can get a RAW SMART data dumb from the device using the 3ware cli.
>
> :~/3ware_cli# ./tw_cli /c2/p0 show model
> /c2/p0 Model = HDS728080PLA380
>
> :~/3ware_cli# ./tw_cli /c2/p1 show model
> /c2/p1 Model = HDS728080PLA380
>
> :~/3ware_cli# ./tw_cli /c2/p0 show smart
>
> /c2/p0 Drive Smart Data:
> 10 00 01 0B 00 63 63 01 00 01 00 00 00 00 02 05
> 00 64 64 00 00 00 00 00 00 00 03 07 00 65 65 C9
> 00 C0 00 04 00 00 04 12 00 64 64 3A 00 00 00 00
> 00 00 05 33 00 64 64 00 00 00 00 00 00 00 07 0B
> 00 64 64 00 00 00 00 00 00 00 08 05 00 64 64 00
> 00 00 00 00 00 00 09 12 00 64 64 DD 07 00 00 00
> 00 00 0A 13 00 64 64 00 00 00 00 00 00 00 0C 32
> 00 64 64 3A 00 00 00 00 00 00 C0 32 00 64 64 8F
> 00 00 00 00 00 00 C1 12 00 64 64 8F 00 00 00 00
> 00 00 C2 02 00 CB CB 1B 00 14 00 21 00 00 C4 32
> 00 64 64 00 00 00 00 00 00 00 C5 22 00 64 64 00
> 00 00 00 00 00 00 C6 08 00 64 64 00 00 00 00 00
> 00 00 C7 0A 00 C8 FD 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 F3 06 01 5B
> 03 00 01 00 01 1E 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0B
>
> Now there's also a minor issue of not having the /dev/twexx devices present 
> until after I run the 3ware cli, but that's just an issue with udev i hope.
>
>
>> Gerwin, what's the problem?
>> 
>> On Fri, 7 Apr 2006, Gerwin van de Steeg wrote:
>> 
>>> Hmm still nothing, and yes i am running linux with kernel 2.6.15.
>>> 
>>> Anyone got any suggestions at all besides waiting for a new release of 
>>> smartmon (whenever that may be).
>>> 
>>> -- 
>>> Gerwin van de Steeg
>>> 
>>> 
>>> 
>>> 
>>> -------------------------------------------------------
>>> This SF.Net email is sponsored by xPML, a groundbreaking scripting 
>>> language
>>> that extends applications into web and mobile media. Attend the live 
>>> webcast
>>> and join the prime developer group breaking into this new coding 
>>> territory!
>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
>>> _______________________________________________
>>> Smartmontools-support mailing list
>>> Sma...@li...
>>> https://lists.sourceforge.net/lists/listinfo/smartmontools-support
>>> 
>> 
>> 
>> -------------------------------------------------------
>> Using Tomcat but need to do more? Need to support web services, security?
>> Get stuff done quickly with pre-integrated technology to make your job 
>> easier
>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>> _______________________________________________
>> Smartmontools-support mailing list
>> Sma...@li...
>> https://lists.sourceforge.net/lists/listinfo/smartmontools-support
>
>
> -- 
> Gerwin van de Steeg
> Engineer
>
>
> Vadacom Ltd
> W: www.vadacom.co.nz
> E: ger...@va...
>