From: John L. <joh...@op...> - 2005-07-13 19:36:22
|
If I'm reading this right its the Intel ICH. Here is my dmesg: libata version 1.11 loaded. ata_piix version 1.03 ata_piix: combined mode detected PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48 ata1: dev 1 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f ata1: dev 1 ATA, max UDMA/133, 156301488 sectors: lba48 ata1: dev 0 configured for UDMA/133 ata1: dev 1 configured for UDMA/133 scsi0 : ata_piix Vendor: ATA Model: ST380817AS Rev: 3.42 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST380013AS Rev: 3.18 Type: Direct-Access ANSI SCSI revision: 05 John On Wed, 2005-07-13 at 10:13 -0600, Samuel Flory wrote: > Brian Morris wrote: > > Samuel Flory wrote: > > > >> If you've got a newer kernel, and install smartctl 5.33. Just try > >> "smartctl -a /dev/sda -d ata". > > > > Odd... because as I said I'm running 2.6.12.2 and I already tried this > > with the 5.33 I downloaded and built and I get this: > > > >> ) sudo ./smartctl -a /dev/sda -d ata > >> smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce > >> Allen > >> Home page is http://smartmontools.sourceforge.net/ > >> > >> Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) > >> > >> A mandatory SMART command failed: exiting. To continue, add one or > >> more '-T permissive' options. > > > > Do I need to have something non-standard enabled in the kernel? > > > > > Not to my knowledge it just works on the promise, and ich chipsets > I've tried. (I've been told it worked on a Siliconimage board as well.) > What chipset are you guys using? I've got an nforce4 at home I can try. > > smartctl -i /dev/sda > > smartctl version 5.33 [i686-suse-linux-gnu] Copyright (C) 2002-4 Bruce Allen > Home page is http://smartmontools.sourceforge.net/ > > Device: ATA Maxtor 7B300S0 Version: BANC > > SATA disks accessed via libata are not currently supported by > smartmontools. When libata is given an ATA pass-thru ioctl() then an > additional '-d libata' device type will be added to smartmontools. > smartctl version 5.33 [i686-suse-linux-gnu] Copyright (C) 2002-4 Bruce Allen > Home page is http://smartmontools.sourceforge.net/ > > > smartctl -i /dev/sda -d ata > > === START OF INFORMATION SECTION === > Device Model: Maxtor 7B300S0 > Serial Number: B60TNFWH > Firmware Version: BANC1E00 > User Capacity: 300,090,728,448 bytes > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: 7 > ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 > Local Time is: Wed Jul 13 08:52:32 2005 PDT > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > -- John Lange President OpenIT ltd. www.Open-IT.ca (204) 885 0872 VoIP, Web services, Linux Consulting, Server Co-Location |