[smartmontools-support]3ware Escalade 9500S-8

[David H. <dhi...@hi...>]

I'm running Fedora core 3 using a 3ware Escalade 9500S-8 raid controller
with 4 SATA drives. I get the following error at boot time:
smartd[4195] Device: /dev/sda, opened
kernel: 3w-9xxx: scsi4: ERROR: (0x03:0x0104): SGL entry has illegal
length:address=0x7735C00, length=0x24, cmd=X.
kernel: program smartd is using a deprecated SCSI ioctl, please convert
it to SG_IO
smartd[4195]: Device /dev/sda, please try '-d 3ware,N'
smartd[4195]: Unable to register SCSI device /dev/sda at line 1 of file
/etc/smard.conf
smard[4195]: Unable to register device /dev/sda (no Directive -d
removable). Exiting

File /etc/smartd.conf:
/dev/sda -H -m root@localhost.localdomain

I ran the following command:
smartctl -H -S on -o on -d 3ware,0 /dev/sda
smartctl version 5.33 [x86_64-redhat-linux-gnu] Copyright....
WARNING - NO DEVICE FOUND ON....

smartctl -H -S on -o on -d 3ware,0 /dev/sda1
SMART support is: Ambiguous - ATA IDENTIFY DEVICE workds 82-83 don't
show if SMART supported.
A manadatory SMART command failed: exiting. ....


So what's the proper smartd.conf file for this configuration?