Menu
▾
▴
[Smartmontools-database] WD Elements 4TB
|
From: Zoran L. <zlj...@gm...> - 2016-03-13 07:49:58
|
root@osmc:/home/osmc# sudo /usr/sbin/update-smart-drivedb /var/lib/smartmontools/drivedb/drivedb.h.error: rejected by /usr/sbin/smartctl, probably no longer compatible root@osmc:/home/osmc# smartctl -t short /dev/sda smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.4.3-3-osmc] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sda: Unknown USB bridge [0x1058:0x107c (0x1065)] Please specify device type with the -d option. Use smartctl -h to get a usage summary root@osmc:/home/osmc# smartctl -x /dev/sda > smartctl-VENDOR-MODEL.txt root@osmc:/home/osmc# cat smartctl-VENDOR-MODEL.txt smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.4.3-3-osmc] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sda: Unknown USB bridge [0x1058:0x107c (0x1065)] Please specify device type with the -d option. Use smartctl -h to get a usage summary root@osmc:/home/osmc# smartctl -q noserial -x /dev/sda > smartctl-VENDOR-MODEL.txt root@osmc:/home/osmc# cat smartctl-VENDOR-MODEL.txt smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.4.3-3-osmc] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sda: Unknown USB bridge [0x1058:0x107c (0x1065)] Please specify device type with the -d option. Use smartctl -h to get a usage summary The furthest I have come is the following: root@osmc:/home/osmc# smartctl -q noserial -d scsi -x /dev/sda > smartctl-VENDOR-MODEL.txt root@osmc:/home/osmc# cat smartctl-VENDOR-MODEL.txt smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.4.3-3-osmc] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: WD Product: Elements 107C Revision: 1065 Compliance: SPC-4 User Capacity: 4,000,752,599,040 bytes [4,00 TB] Logical block size: 4096 bytes Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device type: disk Local Time is: Sun Mar 13 08:42:07 2016 CET SMART support is: Unavailable - device lacks SMART capability. Read Cache is: Unavailable Writeback Cache is: Unavailable === START OF READ SMART DATA SECTION === Error Counter logging not supported No self-tests have been logged Device does not support Background scan results logging root@osmc:/home/osmc# hdparm -I /dev/sda /dev/sda: ATA device, with non-removable media Model Number: WDC WD40EZRZ-00WN9B0 Serial Number: WD-WCC4E5ZYESFS Firmware Revision: 80.00A80 Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 Standards: Supported: 9 8 7 6 5 Likely used: 9 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 7814037168 Logical Sector size: 512 bytes Physical Sector size: 4096 bytes device size with M = 1024*1024: 3815447 MBytes device size with M = 1000*1000: 4000787 MBytes (4000 GB) cache/buffer size = unknown Nominal Media Rotation Rate: 5400 Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, with device specific minimum R/W multiple sector transfer: Max = 16 Current = 0 DMA: *mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE Power-Up In Standby feature set * SET_FEATURES required to spinup after power up * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Gen3 signaling speed (6.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information * unknown 76[15] DMA Setup Auto-Activate optimization Device-initiated interface power management Software settings preservation * SMART Command Transport (SCT) feature set * SCT Write Same (AC2) * SCT Features Control (AC4) * SCT Data Tables (AC5) unknown 206[12] (vendor specific) unknown 206[13] (vendor specific) unknown 206[14] (vendor specific) Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase more than 508min for SECURITY ERASE UNIT. more than 508min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50014ee20c908f89 NAA : 5 IEEE OUI : 0014ee Unique ID : 20c908f89 Checksum: correct root@osmc:/home/osmc# uname -a Linux osmc 4.4.3-3-osmc #1 SMP PREEMPT Tue Mar 1 15:51:08 UTC 2016 armv7l GNU/Linux |
