Menu
▾
▴
[Smartmontools-database] Hitachi HDS721050CLA662
|
From: Jeffery B. B. <JBBURKE@UP.COM> - 2014-03-11 16:03:56
|
smartctl 6.2 2013-07-26 r3841 [i686-w64-mingw32-win8(64)] (sf-6.2-1) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Hitachi HDS721050CLA662 Serial Number: JP1572JE27EBBK LU WWN Device Id: 5 000cca 397df8fc8 Firmware Version: JP2OA41A User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Mar 11 11:02:05 2014 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4978) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 83) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 096 016 - 0 2 Throughput_Performance POS--K 136 100 054 - 94 3 Spin_Up_Time PO---K 119 100 024 - 190 (Average 195) 4 Start_Stop_Count -O---K 100 100 000 - 86 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 140 100 020 - 30 9 Power_On_Hours -O--CK 098 098 000 - 20642 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 85 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 185 Unknown_Attribute -O--CK 100 100 000 - 65535 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 098 000 - 4295622821 189 High_Fly_Writes -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 058 000 - 33 (Min/Max 31/40) 192 Power-Off_Retract_Count -O--CK 100 100 000 - 109 193 Load_Cycle_Count -O--CK 100 100 000 - 109 194 Temperature_Celsius -O---- 181 150 000 - 33 (Min/Max 21/42) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 90% 1 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 31/40 Celsius Lifetime Min/Max Temperature: 21/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (64) Index Estimated Time Temperature Celsius 65 2014-03-11 08:55 32 ************* ... ..( 2 skipped). .. ************* 68 2014-03-11 08:58 32 ************* 69 2014-03-11 08:59 33 ************** ... ..( 60 skipped). .. ************** 2 2014-03-11 10:00 33 ************** 3 2014-03-11 10:01 34 *************** 4 2014-03-11 10:02 33 ************** 5 2014-03-11 10:03 33 ************** 6 2014-03-11 10:04 34 *************** ... ..( 17 skipped). .. *************** 24 2014-03-11 10:22 34 *************** 25 2014-03-11 10:23 33 ************** ... ..( 2 skipped). .. ************** 28 2014-03-11 10:26 33 ************** 29 2014-03-11 10:27 34 *************** 30 2014-03-11 10:28 33 ************** ... ..( 33 skipped). .. ************** 64 2014-03-11 11:02 33 ************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 1) == 1 0x008 4 85 Lifetime Power-On Resets 1 0x010 4 20642 Power-on Hours 1 0x018 6 24411179514 Logical Sectors Written 1 0x020 6 447198402 Number of Write Commands 1 0x028 6 171339471486 Logical Sectors Read 1 0x030 6 514121710 Number of Read Commands 3 ===== = = == Rotating Media Statistics (rev 1) == 3 0x008 4 20638 Spindle Motor Power-on Hours 3 0x010 4 20638 Head Flying Hours 3 0x018 4 109 Head Load Events 3 0x020 4 0 Number of Reallocated Logical Sectors 3 0x028 4 2 Read Recovery Attempts 3 0x030 4 2 Number of Mechanical Start Failures 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 165 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 33 Current Temperature 5 0x010 1 33~ Average Short Term Temperature 5 0x018 1 33~ Average Long Term Temperature 5 0x020 1 42 Highest Temperature 5 0x028 1 21 Lowest Temperature 5 0x030 1 37~ Highest Average Short Term Temperature 5 0x038 1 0~ Lowest Average Short Term Temperature 5 0x040 1 33~ Highest Average Long Term Temperature 5 0x048 1 0~ Lowest Average Long Term Temperature 5 0x050 4 0 Time in Over-Temperature 5 0x058 1 60 Specified Maximum Operating Temperature 5 0x060 4 0 Time in Under-Temperature 5 0x068 1 0 Specified Minimum Operating Temperature 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 427 Number of Hardware Resets 6 0x010 4 149 Number of ASR Events 6 0x018 4 0 Number of Interface CRC Errors |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS |