From: Christian F. <Chr...@t-...> - 2012-10-22 05:42:30
|
Larry Rosenman wrote: > With SMARTMONTOOLS 6.0, I'm getting the following: > > > smartctl 6.0 2012-10-10 r3643 [FreeBSD 10.0-CURRENT amd64] (local build) > Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org > > === START OF INFORMATION SECTION === > Model Family: Seagate Barracuda Green (AF) > Device Model: ST2000DL003-9VT166 > Serial Number: 5YD5RBS8 > LU WWN Device Id: 5 000c50 044128dcd > Firmware Version: CC3D > User Capacity: 2,000,398,934,016 bytes [2.00 TB] > Sector Sizes: 512 bytes logical, 4096 bytes physical > Rotation Rate: 5900 rpm > Device is: In smartctl database [for details use: -P show] > ATA Version is: ATA8-ACS T13/1699-D revision 4 > SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) > Local Time is: Sun Oct 21 18:49:13 2012 CDT > > ==> WARNING: A firmware update for this drive may be available, > see the following Seagate web pages: > http://knowledge.seagate.com/articles/en_US/FAQ/207931en > http://knowledge.seagate.com/articles/en_US/FAQ/218171en > > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > This is the latest firmware available for these drives (They shipped with CC3C, and CC3D > was available). There is NO WAY to go BACK to CC32. > > Can you change the warning? > > Will be done soon. For now, you could add a local drive database entry which overrides the default one. /etc/smart_drivedb.h: { "Seagate Barracuda Green (AF)", "ST((10|15|20)00DL00[123])-.*", "CC3D", "", "" }, See -B option on smartctl man page for more info. Thanks, Christian |