[smartmontools-support] HP BL460C G1 with E200i

[Peter S. <pe...@co...>]

I'm in the process of setting up some servers on our blade chassis' 

 

- HP BL460C G1 with E200i FW version - v1.86

                2 x 146GB HP SAS drives.

- FreeBSD 9.0-RELEASE-p3 amd64

 

Just installed smartmontools and getting some errors 

 

#smartctl -a /dev/pass1

 

smartctl 5.42 2011-10-20 r3458 [FreeBSD 9.0-RELEASE-p3 amd64] (local build)

Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

 

Vendor:               HP      

Product:              EH0146FAWJB     

Revision:             HPDH

User Capacity:        146,815,737,856 bytes [146 GB]

Logical block size:   512 bytes

(pass1:ciss0:32:0:0): Vendor Specific Command. CDB: 1a 0 1c 0 40 0 

(pass1:ciss0:32:0:0): CAM status: CCB request completed with an error

>> Terminate command early due to bad response to IEC mode page

A mandatory SMART command failed: exiting. To continue, add one or more '-T
permissive' options.

 

Running the above command with the additional "-T permissive" gives -

 

smartctl -a -T permissive /dev/pass1

smartctl 5.42 2011-10-20 r3458 [FreeBSD 9.0-RELEASE-p3 amd64] (local build)

Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

 

Vendor:               HP      

Product:              EH0146FAWJB     

Revision:             HPDH

User Capacity:        146,815,737,856 bytes [146 GB]

Logical block size:   512 bytes

(pass1:ciss0:32:0:0): Vendor Specific Command. CDB: 1a 0 1c 0 40 0 

(pass1:ciss0:32:0:0): CAM status: CCB request completed with an error

>> Terminate command early due to bad response to IEC mode page

(pass1:ciss0:32:0:0): Vendor Specific Command. CDB: 4d 0 40 0 0 0 0 0 16 0 

(pass1:ciss0:32:0:0): CAM status: CCB request completed with an error

 

Current Drive Temperature:     25 C

Drive Trip Temperature:        65 C

 

Error counter log:

           Errors Corrected by           Total   Correction     Gigabytes
Total

               ECC          rereads/    errors   algorithm      processed
uncorrected

           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]
errors

read:          0        0         0  120397270          0      10034.973
0

write:         0        0         0         0          0         15.693
0

 

Non-medium error count:        1

(pass1:ciss0:32:0:0): Vendor Specific Command. CDB: 1a 0 a 0 40 0 

(pass1:ciss0:32:0:0): CAM status: CCB request completed with an error

No self-tests have been logged

(pass1:ciss0:32:0:0): Vendor Specific Command. CDB: 1a 0 a 0 40 0 

(pass1:ciss0:32:0:0): CAM status: CCB request completed with an error

Long (extended) Self Test duration: 1140 seconds [19.0 minutes]

 

Did I miss something?

 

 

 

------ 

Peter Sprokkelenburg

Network Connection

Office: 416-967-6767 x225

Fax : 416-967-7777

 <mailto:pe...@co...> pe...@co...