From: Samson L. <sam...@gm...> - 2010-12-03 10:47:44
|
I am using smartmontools-5.40 under arm linux kernel 2.6.16: # smartctl -i -d marvell /dev/sda smartctl 5.40 2010-10-16 r3189 [armv5tejl-unknown-linux-gnueabi] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint S250 series Device Model: SAMSUNG HD250HJ Serial Number: S1K2J9DQ200776 Firmware Version: FH100-05 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Fri Dec 3 18:23:59 2010 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled also, smartmontools always reported the drive is in SLEEP mode although the drive is currently in the middle of a backup process while executing the folllowing command: # smartctl -A -d marvell -n standby /dev/sda smartctl 5.40 2010-10-16 r3189 [armv5tejl-unknown-linux-gnueabi] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device is in SLEEP mode, exit(2) |