[Smartmontools-database] Database addition

[Michael M. <wea...@op...>]

bsch:~# smartctl -a /dev/hda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce =
Allen
Home page is http://smartmontools.sourceforge.net/

=3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D
Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model:     ST380011A
Serial Number:    4JV0ZCMD
Firmware Version: 8.01
User Capacity:    80,026,361,856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Thu Nov 15 18:34:05 2007 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: =
Enabled.
Self-test execution status:      (   0) The previous self-test routine =
completed
                                        without error or no self-test =
has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 430) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection =
on/off support.
                                        Suspend Offline collection upon =
new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test =
supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging =
supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  58) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      =
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   053   048   006    Pre-fail  Always =
      -       53530973
  3 Spin_Up_Time            0x0003   098   097   000    Pre-fail  Always =
      -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always =
      -       16
  5 Reallocated_Sector_Ct   0x0033   096   096   036    Pre-fail  Always =
      -       183
  7 Seek_Error_Rate         0x000f   078   060   030    Pre-fail  Always =
      -       73611242
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always =
      -       20188
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always =
      -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always =
      -       166
194 Temperature_Celsius     0x0022   038   059   000    Old_age   Always =
      -       38
195 Hardware_ECC_Recovered  0x001a   053   047   000    Old_age   Always =
      -       53530973
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always =
      -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   =
Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always =
      -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   =
Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always =
      -       0

SMART Error Log Version: 1
ATA Error Count: 1
        CR =3D Command Register [HEX]
        FR =3D Features Register [HEX]
        SC =3D Sector Count Register [HEX]
        SN =3D Sector Number Register [HEX]
        CL =3D Cylinder Low Register [HEX]
        CH =3D Cylinder High Register [HEX]
        DH =3D Device/Head Register [HEX]
        DC =3D Device Command Register [HEX]
        ER =3D Error register [HEX]
        ST =3D Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=3Ddays, hh=3Dhours, mm=3Dminutes,
SS=3Dsec, and sss=3Dmillisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 20186 hours (841 days + 2 =
hours)
  When the command that caused the error occurred, the device was active =
or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 3f 00 3c e0  Error: UNC 8 sectors at LBA =3D 0x003c003f =3D =
3932223

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 3f 00 3c e0 00      12:51:53.065  READ DMA EXT
  25 00 08 ff b1 60 e0 00      12:51:52.956  READ DMA EXT
  25 00 08 4f 59 60 e0 00      12:51:52.915  READ DMA EXT
  25 00 08 9f 0b 5a e0 00      12:51:52.915  READ DMA EXT
  25 00 08 97 02 5a e0 00      12:51:52.914  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  =
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     20188     =
    -
# 2  Short offline       Completed without error       00%     20188     =
    -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute =
delay.