[smartmontools-support] Smartctl command output

[<PRI...@te...>]

Hello all!!

I would like to submit a question, to see if someone can help me. I have the following system:

[root@io2 /root]# smartctl -a /dev/hdc
smartctl version 5.1-18 Copyright (C) 2002-3 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
 
=== START OF INFORMATION SECTION ===
Device Model:     FUJITSU MHT2040AS
Serial Number:    NP1FT42254W3
Firmware Version: 006C
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 3a
Local Time is:    Mon Feb  8 17:52:52 2010 WET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Off-line data collection status: (0x85) Offline data collection activity was
                                        aborted by an interrupting command from host.
                                        Auto Off-line Data Collection: Enabled.
Self-test execution status:      ( 245) Self-test routine in progress...
                                        50% of test remaining.
Total time to complete off-line 
data collection:                 ( 293) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Automatic timer ON/OFF support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  40) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
 
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail  Always       -       252555
  2 Throughput_Performance  0x0005   100   100   030    Pre-fail  Offline      -       14483456
  3 Spin_Up_Time            0x0003   100   100   025    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       6
  5 Reallocated_Sector_Ct   0x0033   100   100   024    Pre-fail  Always       -       8589934592000
  7 Seek_Error_Rate         0x000f   100   100   047    Pre-fail  Always       -       1744
  8 Seek_Time_Performance   0x0005   100   100   019    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   006   006   000    Old_age   Always       -       170094793
 10 Spin_Retry_Count        0x0013   100   100   020    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       5
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       1
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       56
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       39 (Lifetime Min/Max 21/42)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       10501
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       287440896
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       1
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000f   100   100   060    Pre-fail  Always       -       7368
203 Run_Out_Cancel          0x0002   100   100   000    Old_age   Always       -       2628586044629
 
SMART Error Log Version: 1
No Errors Logged
 
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Conveyance off-line Completed without error       00%     47248         -
# 2  Extended captive    Interrupted (host reset)      90%     47248         -
# 3  Short off-line      Completed without error       00%     47248         -
# 4  Short captive       Interrupted (host reset)      90%     47248         -
# 5  Short captive       Interrupted (host reset)      90%     47247         -
# 6  Short off-line      Completed without error       00%     47247         -
# 7  Extended off-line   Completed: read failure       20%     47007         0x042798c1
# 8  Short off-line      Completed without error       00%     47007         -

As you can see in the selftests results, when I run a long selftest, the output is that I have an error. But there is no information about what's wrong with the system, or how can I fix it. Does anyone know how to identify the error?

Any help is welcomed.

BR,

Alberto Martínez