From: Christian F. <Chr...@t-...> - 2010-01-01 20:56:43
|
Jos van den Oever wrote: > I used the svn version of smartctl on my external 2.5" hard disk (Toshiba > PX1270E-1G16). This device has ID 0930:0b03. > > smartctl --all -d usbsunplus /dev/sdb > > works on this drive. The output is attached to this mail. > > Added to Wiki and USB ID table. Should now work without '-d usbsunplus'. Could you please test whether 48-bit ATA commands work with this drive: # smartctl -xall /dev/sdb > smartctl -d usbsunplus -s on -o on -S on /dev/sdb > smartctl 5.40 2009-12-19 r3006 [x86_64-unknown-linux-gnu] (local build) > Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF ENABLE/DISABLE COMMANDS SECTION === > SMART Enabled. > SMART Attribute Autosave Enabled. > Error SMART Enable Automatic Offline failed: Input/output error > Smartctl: SMART Enable Automatic Offline Failed. > Automatic Offline Testing is likely unsupported. It is an optional feature only defined in the original SMART standard. It was not part of ATA-3 and was defined obsolete in ATA-4. Thanks, Christian |