Menu
▾
▴
Re: [smartmontools-support] exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
|
From: Jonas P. <jon...@xm...> - 2008-08-30 21:57:57
|
Justin Piszcz skrev: > On Sat, 30 Aug 2008, Jonas Petersson wrote: >> [...] > smartctl -a would be useful (#1) # smartctl -a /dev/sda smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: FUJITSU MHY2250BH Serial Number: K43CT862GMK9 Firmware Version: 0081000D User Capacity: 250 059 350 016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3f Local Time is: Sat Aug 30 23:52:36 2008 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1009) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 143) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 0 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 117 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 087 047 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1021 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 65547 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 26215 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 35 (Lifetime Min/Max 21/53) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 0 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 0 240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 837 - # 2 Extended offline Completed without error 00% 827 - # 3 Short offline Completed without error 00% 825 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. > An "lshw" run would also be useful, I am curious which chipset they are > using for the SATA I/O on that hardware type. Bit big, but I've attached it. As I mentioned, this is a pretty recent MacBookPro 4,1 with the new multitouch ("iphone" style) mousepad and the higher resolution screen. Was pretty cool the first two week - until I ran into this issue... :-( Best / Jonas |
