[Smartmontools-database] Hitachi Deskstar P7K500 500GB 16MB SATA II (HDP725050GLA360)

[Wagner, H. (GE E. I. Platforms) <Hel...@ge...>]

...still missing in the database.

vendor information:
http://www.hitachigst.com/portal/site/en/menuitem.e6b513c73a0b7518e82849
77eac4f0a0/
datasheet:
http://www.hitachigst.com/portal/binary/com.epicentric.contentmanagement
.servlet.ContentDeliveryServlet/hgst/products/Deskstar/p7k500/HGST_Desks
tar_P7K500_DS_FINAL.pdf

my smart infos (serial number replaced with '?' characters):

========================================================================
=================================
smartctl version 5.38 [x86_64-suse-linux-gnu] Copyright (C) 2002-8 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     Hitachi HDP725050GLA360
Serial Number:    ??????????????
Firmware Version: GM4OA50E
User Capacity:    500,107,862,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Thu Apr 17 14:07:23 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting
command from host.
                                        Auto Offline Data Collection:
Enabled.
Self-test execution status:      (   0) The previous self-test routine
completed
                                        without error or no self-test
has ever
                                        been run.
Total time to complete Offline
data collection:                 (7854) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection
on/off support.
                                        Suspend Offline collection upon
new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test
supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging
supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 131) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always
-       0
  2 Throughput_Performance  0x0005   100   100   054    Pre-fail
Offline      -       110
  3 Spin_Up_Time            0x0007   118   118   024    Pre-fail  Always
-       324 (Average 324)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always
-       2005
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always
-       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always
-       0
  8 Seek_Time_Performance   0x0005   134   134   020    Pre-fail
Offline      -       28
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always
-       1779
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always
-       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always
-       39
192 Power-Off_Retract_Count 0x0032   099   099   000    Old_age   Always
-       2030
193 Load_Cycle_Count        0x0012   099   099   000    Old_age   Always
-       2030
194 Temperature_Celsius     0x0002   240   240   000    Old_age   Always
-       25 (Lifetime Min/Max 14/28)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always
-       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always
-       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age
Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always
-       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1778
-
# 2  Short offline       Completed without error       00%      1754
-

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute
delay.
========================================================================
=================================