Content-Type: multipart/mixed; boundary="Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E" --Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E Content-Transfer-Encoding: 7bit Content-Type: text/html; charset=us-ascii Hi,

I'd like to submit 4 disks to the database with seemingly incorrectly interpreted raw values. Many values are being interpreted as either  pre-fail or old-age even when it seems counter-intuitive.

Hitachi 2,5'' 500GB

There were 2 identical ones in my mac mini. One started having bad sectors (possibly plenty), the other is still doing fine. Otherwise, same age, same type, same everything, so I include both for comparison.

Hitachi with bad sectors

--Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E Content-Disposition: attachment; filename=disk0.txt Content-Type: text/plain; x-unix-mode=0644; name="disk0.txt" Content-Transfer-Encoding: quoted-printable smartctl 5.42 2011-10-20 r3458 [x86_64-apple-darwin11.4.0] (local build) Copyright (C) 2002-11 by Bruce Allen, = http://smartmontools.sourceforge.net =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Device Model: Hitachi HTS725050A9A362 Serial Number: 100720PCG420VLJTBN8C LU WWN Device Id: 5 000cca 5b5e743a9 Firmware Version: PC4ACB1E User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Wed Jun 13 23:31:17 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: = Disabled. Self-test execution status: ( 0) The previous self-test routine = completed without error or no self-test = has ever=20 been run. Total time to complete Offline=20 data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection = on/off support. Suspend Offline collection upon = new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test = supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging = supported. Short self-test routine=20 recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control = supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE = UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always = - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail = Offline - 0 3 Spin_Up_Time 0x0007 160 160 033 Pre-fail Always = - 2 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always = - 147 5 Reallocated_Sector_Ct 0x0033 093 093 005 Pre-fail Always = - 764 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always = - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail = Offline - 0 9 Power_On_Hours 0x0012 073 073 000 Old_age Always = - 12259 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always = - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always = - 143 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always = - 0 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always = - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always = - 22 193 Load_Cycle_Count 0x0012 081 081 000 Old_age Always = - 194610 194 Temperature_Celsius 0x0002 144 144 000 Old_age Always = - 38 (Min/Max 20/48) 195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always = - 0 196 Reallocated_Event_Count 0x0032 087 087 000 Old_age Always = - 1025 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always = - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age = Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always = - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always = - 0 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always = - 1 SMART Error Log Version: 1 ATA Error Count: 11600 (device log contains only the most recent five = errors) CR =3D Command Register [HEX] FR =3D Features Register [HEX] SC =3D Sector Count Register [HEX] SN =3D Sector Number Register [HEX] CL =3D Cylinder Low Register [HEX] CH =3D Cylinder High Register [HEX] DH =3D Device/Head Register [HEX] DC =3D Device Command Register [HEX] ER =3D Error register [HEX] ST =3D Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=3Ddays, hh=3Dhours, mm=3Dminutes, SS=3Dsec, and sss=3Dmillisec. It "wraps" after 49.710 days. Error 11600 occurred at disk power-on lifetime: 12250 hours (510 days + = 10 hours) When the command that caused the error occurred, the device was active = or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 1b ed 5f 34 4a Error: UNC 27 sectors at LBA =3D 0x0a345fed =3D = 171204589 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 20 e8 5f 34 40 00 00:01:02.300 READ DMA EXT ef 10 03 00 00 00 00 00 00:01:02.300 SET FEATURES [Reserved for = Serial ATA] ef 10 02 00 00 00 00 00 00:01:02.300 SET FEATURES [Reserved for = Serial ATA] ef 02 00 00 00 00 00 00 00:01:02.300 SET FEATURES [Enable write = cache] ef aa 00 00 00 00 00 00 00:01:02.300 SET FEATURES [Enable read = look-ahead] Error 11599 occurred at disk power-on lifetime: 12130 hours (505 days + = 10 hours) When the command that caused the error occurred, the device was active = or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 06 60 34 4a Error: UNC 1 sectors at LBA =3D 0x0a346006 =3D = 171204614 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 01 06 60 34 40 00 00:17:43.500 READ DMA EXT 25 00 01 06 60 34 40 00 00:17:39.800 READ DMA EXT 2f 00 01 10 00 00 00 00 00:17:39.800 READ LOG EXT 60 01 e8 06 60 34 40 00 00:17:36.000 READ FPDMA QUEUED 60 08 e0 48 40 06 40 00 00:17:36.000 READ FPDMA QUEUED Error 11598 occurred at disk power-on lifetime: 12130 hours (505 days + = 10 hours) When the command that caused the error occurred, the device was active = or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 06 60 34 4a Error: UNC 1 sectors at LBA =3D 0x0a346006 =3D = 171204614 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 01 06 60 34 40 00 00:17:39.800 READ DMA EXT 2f 00 01 10 00 00 00 00 00:17:39.800 READ LOG EXT 60 01 e8 06 60 34 40 00 00:17:36.000 READ FPDMA QUEUED 60 08 e0 48 40 06 40 00 00:17:36.000 READ FPDMA QUEUED 60 08 d8 40 40 06 40 00 00:17:36.000 READ FPDMA QUEUED Error 11597 occurred at disk power-on lifetime: 12130 hours (505 days + = 10 hours) When the command that caused the error occurred, the device was active = or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 20 e8 5f 34 4a Error: UNC 32 sectors at LBA =3D 0x0a345fe8 =3D = 171204584 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 20 e8 5f 34 40 00 00:03:32.100 READ DMA EXT 25 00 20 e8 5f 34 40 00 00:03:28.300 READ DMA EXT 25 00 20 e8 5f 34 40 00 00:03:24.600 READ DMA EXT 25 00 20 e8 5f 34 40 00 00:03:20.900 READ DMA EXT 2f 00 01 10 00 00 00 00 00:03:20.900 READ LOG EXT Error 11596 occurred at disk power-on lifetime: 12130 hours (505 days + = 10 hours) When the command that caused the error occurred, the device was active = or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 20 e8 5f 34 4a Error: UNC 32 sectors at LBA =3D 0x0a345fe8 =3D = 171204584 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 20 e8 5f 34 40 00 00:03:28.300 READ DMA EXT 25 00 20 e8 5f 34 40 00 00:03:24.600 READ DMA EXT 25 00 20 e8 5f 34 40 00 00:03:20.900 READ DMA EXT 2f 00 01 10 00 00 00 00 00:03:20.900 READ LOG EXT 60 20 40 e8 5f 34 40 00 00:03:17.100 READ FPDMA QUEUED SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute = delay. --Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E Content-Transfer-Encoding: 7bit Content-Type: text/html; charset=us-ascii

Hitachi in good condition

--Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E Content-Disposition: attachment; filename=Hitachi.HTS725050A9A362.txt Content-Type: text/plain; x-unix-mode=0644; name="Hitachi.HTS725050A9A362.txt" Content-Transfer-Encoding: quoted-printable smartctl 5.42 2011-10-20 r3458 [x86_64-apple-darwin11.4.0] (local build) Copyright (C) 2002-11 by Bruce Allen, = http://smartmontools.sourceforge.net =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Device Model: Hitachi HTS725050A9A362 Serial Number: 100716PCG420VLJPBH9C LU WWN Device Id: 5 000cca 5b5e5e5f2 Firmware Version: PC4ACB1E User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Thu Jun 28 14:46:56 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: = Disabled. Self-test execution status: ( 0) The previous self-test routine = completed without error or no self-test = has ever=20 been run. Total time to complete Offline=20 data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection = on/off support. Suspend Offline collection upon = new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test = supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging = supported. Short self-test routine=20 recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control = supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE = UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always = - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail = Offline - 0 3 Spin_Up_Time 0x0007 157 157 033 Pre-fail Always = - 2 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always = - 526 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always = - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always = - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail = Offline - 0 9 Power_On_Hours 0x0012 074 074 000 Old_age Always = - 11429 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always = - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always = - 150 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always = - 0 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always = - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always = - 19 193 Load_Cycle_Count 0x0012 086 086 000 Old_age Always = - 141343 194 Temperature_Celsius 0x0002 148 148 000 Old_age Always = - 37 (Min/Max 19/46) 195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always = - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always = - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always = - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age = Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always = - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always = - 0 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always = - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining = LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 11429 = - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute = delay. --Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E Content-Transfer-Encoding: 7bit Content-Type: text/html; charset=us-ascii


Hitachi 2,5'' 320GB

Similar disk but from a notebook, still doing fine. Included for comparison.

--Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E Content-Disposition: attachment; filename=Hitachi.HTS545032B9SA02.txt Content-Type: text/plain; x-unix-mode=0644; name="Hitachi.HTS545032B9SA02.txt" Content-Transfer-Encoding: quoted-printable smartctl 5.42 2011-10-20 r3458 [x86_64-apple-darwin11.4.0] (local build) Copyright (C) 2002-11 by Bruce Allen, = http://smartmontools.sourceforge.net =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Device Model: Hitachi HTS545032B9SA02 Serial Number: 100119PBTC001DGWJ56Y LU WWN Device Id: 5 000cca 5edcc82b6 Firmware Version: PB3AC60W User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Thu Jun 28 14:59:01 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: = Disabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline=20 data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection = on/off support. Suspend Offline collection upon = new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test = supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging = supported. Short self-test routine=20 recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 106) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control = supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE = UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always = - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail = Offline - 0 3 Spin_Up_Time 0x0007 177 177 033 Pre-fail Always = - 2 4 Start_Stop_Count 0x0012 081 081 000 Old_age Always = - 30160 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always = - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always = - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail = Offline - 0 9 Power_On_Hours 0x0012 074 074 000 Old_age Always = - 11566 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always = - 0 12 Power_Cycle_Count 0x0032 082 082 000 Old_age Always = - 29305 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always = - 0 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always = - 1013612281856 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always = - 103103266833 193 Load_Cycle_Count 0x0012 001 001 000 Old_age Always = - 1262709 194 Temperature_Celsius 0x0002 157 157 000 Old_age Always = - 35 (Min/Max 16/44) 195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always = - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always = - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always = - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age = Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always = - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always = - 0 254 Free_Fall_Sensor 0x0032 089 089 000 Old_age Always = - 4294970271 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining = LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 11342 = - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute = delay. --Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E Content-Transfer-Encoding: 7bit Content-Type: text/html; charset=us-ascii


Seagate Momentus 5400.6 2,5''

This disk has replaced Hitachi with bad sectors. It is a new disk and it seems at least some values are interpreted incorrectly (Error rates mainly)

--Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E Content-Disposition: attachment; filename=Seagate.ST9500325AS.txt Content-Type: text/plain; x-unix-mode=0644; name="Seagate.ST9500325AS.txt" Content-Transfer-Encoding: quoted-printable smartctl 5.42 2011-10-20 r3458 [x86_64-apple-darwin11.4.0] (local build) Copyright (C) 2002-11 by Bruce Allen, = http://smartmontools.sourceforge.net =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Seagate Momentus 5400.6 Device Model: ST9500325AS Serial Number: S2WFT8RZ LU WWN Device Id: 5 000c50 04b0d2fc7 Firmware Version: 0001SDM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Thu Jun 28 14:49:31 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: = Disabled. Self-test execution status: ( 0) The previous self-test routine = completed without error or no self-test = has ever=20 been run. Total time to complete Offline=20 data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection = on/off support. Suspend Offline collection upon = new command. No Offline surface scan = supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging = supported. Short self-test routine=20 recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 139) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control = supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE = UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 100 006 Pre-fail Always = - 213079029 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always = - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always = - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always = - 0 7 Seek_Error_Rate 0x000f 062 060 030 Pre-fail Always = - 1702514 9 Power_On_Hours 0x0032 100 100 000 Old_age Always = - 173 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always = - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always = - 10 184 End-to-End_Error 0x0032 100 100 099 Old_age Always = - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always = - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always = - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always = - 0 190 Airflow_Temperature_Cel 0x0022 062 054 045 Old_age Always = - 38 (Min/Max 33/46) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always = - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always = - 0 193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always = - 13737 194 Temperature_Celsius 0x0022 038 046 000 Old_age Always = - 38 (0 23 0 0 0) 195 Hardware_ECC_Recovered 0x001a 059 058 000 Old_age Always = - 213079029 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always = - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age = Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always = - 0 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always = - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining = LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 173 = - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute = delay. --Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E Content-Transfer-Encoding: 7bit Content-Type: text/html; charset=us-ascii

Regards,

Tytus Suski
--Apple-Mail=_1B3DE08F-C6E3-4397-BB6A-7C9E2AE8BB0E--