Alex,

 

I upgraded to smartmontools 5.43 and still have same issues, getting errors when smartctl requests smart status.

 

E200i is at latest firmware available – 1.86

 

Configuration is 2 x 146GB SAS drives in a HP BL460c G1 blade with Freebsd 9.0

 

---------------------------------------------------

 

Running - smartctl -a -d cciss,0 /dev/pass1

 

smartctl 5.43 2012-06-30 r3573 [FreeBSD 9.0-RELEASE-p3 amd64] (local build)

Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

 

CCISS ioctl error 3 (fd -1 CDBLen 12 buf_size 8328)

Smartctl open device: /dev/pass1 [cciss_disk_00] [SCSI/SAT] failed: INQUIRY [SAT]: Device not configured

 

---------------------------------------------------

 

But changing to SCSI - smartctl -a -d scsi –T permissive /dev/pass1

 

smartctl 5.43 2012-06-30 r3573 [FreeBSD 9.0-RELEASE-p3 amd64] (local build)

Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

 

Vendor:               HP     

Product:              EH0146FAWJB    

Revision:             HPDH

User Capacity:        146,815,737,856 bytes [146 GB]

Logical block size:   512 bytes

(pass1:ciss0:32:0:0): Vendor Specific Command. CDB: 1a 0 1c 0 40 0

(pass1:ciss0:32:0:0): CAM status: CCB request completed with an error

>> Terminate command early due to bad response to IEC mode page

(pass1:ciss0:32:0:0): Vendor Specific Command. CDB: 4d 0 40 0 0 0 0 0 16 0

(pass1:ciss0:32:0:0): CAM status: CCB request completed with an error

 

Current Drive Temperature:     25 C

Drive Trip Temperature:        65 C

 

Error counter log:

           Errors Corrected by           Total   Correction     Gigabytes    Total

               ECC          rereads/    errors   algorithm      processed    uncorrected

           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors

read:          0        0         0  512252568          0      40802.480           0

write:         0        0         0         0          0         26.643           0

 

Non-medium error count:        1

(pass1:ciss0:32:0:0): Vendor Specific Command. CDB: 1a 0 a 0 40 0

(pass1:ciss0:32:0:0): CAM status: CCB request completed with an error

No self-tests have been logged

(pass1:ciss0:32:0:0): Vendor Specific Command. CDB: 1a 0 a 0 40 0

(pass1:ciss0:32:0:0): CAM status: CCB request completed with an error

Long (extended) Self Test duration: 1140 seconds [19.0 minutes]

 

Any thoughts?

 

------

Peter