smartctl -a /dev/sda

 

smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.32.12] (local build)

Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

 

=== START OF INFORMATION SECTION ===

Device Model:     ST3000DM001-9YN166

Serial Number:    Z1F0HP3V

LU WWN Device Id: 5 000c50 03fe152be

Firmware Version: CC4C

User Capacity:    3,000,592,982,016 bytes [3.00 TB]

Sector Sizes:     512 bytes logical, 4096 bytes physical

Device is:        Not in smartctl database [for details use: -P showall]

ATA Version is:   8

ATA Standard is:  ATA-8-ACS revision 4

Local Time is:    Tue Jun 12 11:32:56 2012 CEST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

 

General SMART Values:

Offline data collection status:  (0x00) Offline data collection activity

                                        was never started.

                                        Auto Offline Data Collection: Disabled.

Self-test execution status:      (   0) The previous self-test routine completed

                                        without error or no self-test has ever

                                        been run.

Total time to complete Offline

data collection:                (  575) seconds.

Offline data collection

capabilities:                    (0x73) SMART execute Offline immediate.

                                        Auto Offline data collection on/off support.

                                        Suspend Offline collection upon new

                                        command.

                                        No Offline surface scan supported.

                                        Self-test supported.

                                        Conveyance Self-test supported.

                                        Selective Self-test supported.

SMART capabilities:            (0x0003) Saves SMART data before entering

                                        power-saving mode.

                                        Supports SMART auto save timer.

Error logging capability:        (0x01) Error logging supported.

                                        General Purpose Logging supported.

Short self-test routine

recommended polling time:        (   1) minutes.

Extended self-test routine

recommended polling time:        ( 255) minutes.

Conveyance self-test routine

recommended polling time:        (   2) minutes.

SCT capabilities:              (0x3085) SCT Status supported.

 

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

  1 Raw_Read_Error_Rate     0x000f   114   099   006    Pre-fail  Always       -       63659400

  3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0

  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       36

  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0

  7 Seek_Error_Rate         0x000f   068   060   030    Pre-fail  Always       -       6412953

  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1341

10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0

12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       5

183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0

184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0

187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0

188 Command_Timeout         0x0032   100   074   000    Old_age   Always       -       120260919327

189 High_Fly_Writes         0x003a   099   099   000    Old_age   Always       -       1

190 Airflow_Temperature_Cel 0x0022   066   055   045    Old_age   Always       -       34 (Min/Max 33/42)

191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0

192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       2

193 Load_Cycle_Count        0x0032   085   085   000    Old_age   Always       -       30977

194 Temperature_Celsius     0x0022   034   045   000    Old_age   Always       -       34 (0 24 0 0 0)

197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0

198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0

199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0

240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       65287797867286

241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       70957500649719

242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1388480032800

 

SMART Error Log Version: 1

No Errors Logged

 

SMART Self-test log structure revision number 1

No self-tests have been logged.  [To run self-tests, use: smartctl -t]

 

 

SMART Selective self-test log data structure revision number 1

SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.