Menu
▾
▴
Re: [skce-help] Enquiry about the SKCE
|
From: StrongKey C. H. <skc...@li...> - 2012-12-06 02:55:04
|
Yes, that is correct. Glassfish requires that the alias of the certificate be "s1as" (it is the number one, not the letter L) for the SSL port to become active. Arshad On 12/05/2012 03:36 AM, Pawan wrote: > Hi Arshad Noor , > > Here > http://www.cryptoengine.org/skce-docs/42-subinstall/96-install-glassfish31.html > web age , step 3 > > { > " Now we will back up the original certificate. Type the command below > to do so. Also replace the required variables with the values set up in > your environment. > > keytool -changealias -alias s1as -destalias s1as.original -keystore > <Glassfish Home>/domains/domain1/config/keystore.jks -storepass changeit " > > } > > > > "slas" means alias name which is created in step 2 ?? > > > Please suggest me. > > > Thanks & Regards > pawan.A > > > > > > > > > > > > On Sat, Dec 1, 2012 at 5:50 AM, Arshad Noor <ars...@st... > <mailto:ars...@st...>> wrote: > > There is no additional documentation on the source code, Pawan. The > expectation is that software developers have a sufficient understanding > in Java to follow the code. If you have specific questions on sections > of the code, feel free to highlight them in your e-mail with specific > questions and we'll be happy to respond. > > The <https://<host:port> implies that you've setup the CryptoEngine as > a web-service on your network (following the instructions given at > http://www.cryptoengine.org/__skce-docs/37-skce-install.html > <http://www.cryptoengine.org/skce-docs/37-skce-install.html>__). > > Once you've setup the CryptoEngine as a web-service on your network, > then you will specify the fully-qualified domain name and the port > number of the server where the CryptoEngine web-service is running > to test the JavaClient.jar program. That's what the https://<host:port> > refers to. > > Arshad Noor > StrongAuth, Inc. > > On 11/29/2012 10:48 PM, Pawan wrote: > > Hi Arshad Noor, > > > > Once again thank you for your Information. I > made an > attempt to explore source of SKCE, but SKCE source code a bit > complicated to understand a person new to SKCE like me. I would > like to > request you Please provide any Documentation or information > about source > code. And When we ran the jar file JavaClient.Jar which takes a > bunch > of arguments as input, in that what does it means > "*https://<host:port>*" ? > > > > > > On Tue, Nov 27, 2012 at 5:19 PM, Arshad Noor > <ars...@st... <mailto:ars...@st...> > <mailto:arshad.noor@__strongauth.com > <mailto:ars...@st...>>> wrote: > > Yes, it is possible to use this in your application even if > your > application does not require authentication. You can create a > credential in LDAP and put those credentials in the SKCE > configuration properties file, so your users don't have to > supply a > credential. > > If you want to eliminate ALL authentication, then, just > comment out > that section os the SKCE code and build your own jar/war > file for > your application. > > Arshad Noor > StrongAuth, Inc. > > On Nov 26, 2012, at 10:23 PM, Pawan <pav...@gm... > <mailto:pav...@gm...> > <mailto:pav...@gm... <mailto:pav...@gm...>>__> > wrote: > > Hi Arshad Noor , > > > Thanks for your information , it is very > helpful > for me . I have understood and analysed what actually > happened in > StrongAuth Crypto Engine. According to our Cloud-stack ( > Eucalyptus , XEN ) and features we have a specific portal > (application). Application which does n't requires LDAP > Authentication. Is it Possible to use this > Encryption/Decryption > Web-service in my application. if possible please > provide me > information. > > > Thanks in Advance. > > > > On Mon, Nov 26, 2012 at 11:06 PM, Arshad Noor > <ars...@st... > <mailto:ars...@st...> > <mailto:arshad.noor@__strongauth.com > <mailto:ars...@st...>>> > wrote: > > Hi Pawan, > > You can do precisely what you described in your > e-mail, with the > CryptoEngine. Take a look at the source-code of > the StrongKey > CryptoCabinet > (http://www.cryptocabinet.org/__how-skcc-works.html > <http://www.cryptocabinet.org/how-skcc-works.html>) > and you'll see how the CryptoEngine can be > integrated into your > application. > > If you need any additional help, just join the Help > forum at > Sourceforge > (http://sourceforge.net/__projects/skce/forums > <http://sourceforge.net/projects/skce/forums>) and > we'll be more than happy to help with additional > questions. > > Arshad Noor > StrongAuth, Inc. > > P.S. You can also get an idea of how the > CryptoEngine can be > used by reviewing this article on RC3: > http://ibm.co/rc3dw > > > On 11/26/2012 12:56 AM, StrongAuth Webmaster wrote: > > From Pawan at pav...@gm... > <mailto:pav...@gm...> > <mailto:pav...@gm... <mailto:pav...@gm...>> > : Hi > > i am pawan working in CDAC as Project > Engineer.i > just got working out with Eucalyptus > Walrus(Open Source > 2.0.2 ). Here To communicate with Eucalyptus > Walrus we are > using Jets3t (Third party) API. > > I have gone through your web-site thoroughly > and i got > stuck up with this question in mind, that How > this can be > integrated with my Application which will > communicate with > Walrus. Please Help me in this issue. And i > want to use > CryptoEngine to Encrypt Files(data) and upload > into Cloud > , Decrypt file(data) and download from Cloud. > > > > Thanks in Advance. > [14.139.180.34, safari 537.11] > > > > > |
