From: Pratip G. <pra...@ne...> - 2015-05-18 14:59:49
|
Hi, Greetings!! Currently I am facing some issue to implement systemimager. I request your kind guidance. I have installd and configured systemimager (version - 4.1.99.svn4556yaubert) on Debian 8 Jessie server. Also successfully fetch the image of golden client using *si_getimage*. Now I am unable to create bootable USB disk on systemimager server. Please find following error details which I am facing now. /dev/sde is the usb disk here. ########################################################################## root@debian:~# si_mkautoinstalldisk --device /dev/sde Creating DOS filesystem in /dev/sde... >> mkdosfs -I /dev/sde mkfs.fat 3.0.27 (2014-11-12) Using "syslinux" to make a bootable device... >> syslinux /dev/sde plain floppy: device "/proc/16658/fd/3" busy (Resource temporarily unavailable): Cannot initialize 'S:' Bad target s:/ldlinux.sys syslinux: failed to create ldlinux.sys error: syslinux /dev/sde at /usr/bin/si_mkautoinstalldisk line 233, <STDIN> line 1. ############################################################################# After failing to create USB disk, I have created a bootable *.iso* image file using *si_mkautoinstallcd *with standard flavour. When I use the .iso file (the standard one) to boot a client node, it unable to get IP address from our internal DHCP server in the same network. When I use the .iso file (the standard one) with appending all required network information to the kernel at the boot time, it assigned the IP address to eth0 but not able to ping imageserver IP or the wateway IP. I have also manually configured network properties at the /my_modules # prompt with following commands but faced same issue. 1> add DNS name server at /etc/resolv.conf 2> start lan card with ip and mask ifconfig eth0 192.168.1.100 netmask 255.255.255.0 3> add the gateway # remove the default gw , if any route del default # set default gw route add default gw 192.168.1.1 Regards, Pratip Ghosh On Fri, May 15, 2015 at 6:59 PM, Pratip Ghosh <pra...@ne...> wrote: > Hi > > Can anyone help me out on creation bootable USB disk in image server using > *si_mkautoinstalldisk*. > > I have install and configured systemimage server on Debian 8 Jessie. Also > successfully fetch the image from golden client using *si_setimage*. Now > I am unable to create bootable USB disk to boot other clients with same > hardawre configuration as golden client. > > Please find following error details which I am facing now. > > Please help me out on this. If you required I can share more details of > system information or error information which will require. > > ########################################################################## > root@debian:~# si_mkautoinstalldisk -- device /dev/sde > error: target device was not specified! > Try "--help" for more options. > root@debian:~# si_mkautoinstalldisk --device /dev/sde > ======================= WARNING ======================= > Using device: /dev/sde > This command will overwrite the data on that device!!! > ======================= WARNING ======================= > > Are you sure to continue? (y / N)? y > > Using kernel: /usr/share/systemimager/boot/x86_64/standard/kernel > Using initrd: /usr/share/systemimager/boot/x86_64/standard/initrd.img > > Creating DOS filesystem in /dev/sde... > >> mkdosfs -I /dev/sde > mkfs.fat 3.0.27 (2014-11-12) > Using "syslinux" to make a bootable device... > >> syslinux /dev/sde > plain floppy: device "/proc/16658/fd/3" busy (Resource temporarily > unavailable): > Cannot initialize 'S:' > Bad target s:/ldlinux.sys > syslinux: failed to create ldlinux.sys > error: syslinux /dev/sde at /usr/bin/si_mkautoinstalldisk line 233, > <STDIN> line 1. > > > ############################################################################# > > Thanks and Regards, > > Pratip Ghosh > |