From: <an...@co...> - 2014-07-14 14:19:21
|
Thanks, I got it to work just by installing the RPM on the master node. Since Master/Slave nodes are all the same it compiled correctly this time. Now I have one more issue I'm trying to understand. The client connects and starts building. It originally had an issue connecting with RSYNC so I added a statement to allow 192.168.3.0/255.255.255.0 to rsyncd. Well, that statement let the install script format the drives and such and then it comes up again with the access denied. Is there another location where I should put the allow 192.168.3.0/255.255.255.0? I think if I figure that out I'm done! Andy > On July 14, 2014 at 6:03 AM Pierre BLONDEAU <pie...@un...> > wrote: > > > Hi, > > Yes, it's exactly what i try to say. > > On one cloned client or on the golden client ( or master node if you > prefer ) but not image, you install the official driver. > > For exemple : > cd /usr/src/ > wget .... > unzip bnx2.zip -d bnx2 > cd bnx2/Server/Linux/Driver > tar zxvf netxtreme2-5.2.55.tar.gz > cd netxtreme2-5.2.55 > make > make install > > You add the module to the UYOK file : > echo "bnx2" >> /etc/systemimager/UYOK.modules_to_include > > And you regenerate a new initrd with the new driver: > LC_ALL=C si_prepareclient --server your.systemimager.server.com > --no-rsyncd --my-modules > > This command is for 4.0.2. If i good remember, it's little change in 4.3 . > > And you can copy file in /etc/systemimager/boot/* in your tftboot. > > Remark, it's not necessary to install the driver in "dkms" mode, because > when your clone machines restart after the installation of the image, > the kernel kernel can use the driver in "firmware mode" because your > complete system have it. > > Regards > > Le 13/07/2014 06:05, an...@co... a écrit : > > Thanks for the reply! I guess I'm not understanding what you meant. I have a > > master node (dell01) with CentOS 6.5. This is where I run SI and the UYOK > > script to generate the initrd/kernel files. Are you saying I should install > > the "official" network card driver from Broadcom on the master node, create > > the initrd/kernel and then try imaging on my slave node? > > > > Thanks again and you can send to my email if you like also > > > > Andy > > > > > > > > > > Hi, > > > > We have solve this problem by install bnx2 module from the source of > > broadcrom. The broadcom version works like others modules and not like a > > "firmware" so it's included with UYOK. > > > > Regards > > > > Le 12/07/2014 07:02, Andy a écrit : > >> Hi, > >> > >> I'm having issues with SI and using the UYOK feature. It seems to build > >> the kernel without issue but the network card can't load the firmware. > >> During the image loading on by slave node I get > >> > >> bnx2: Can't load firmware file "bnx2/bnx2-mips-06-6.2.3.fw > >> > >> Since it can't find that then in can't grab and IP and the rest fails. > >> > >> I'm using systemimager 4.3.0.17 > >> > >> When I create the initrd/kernel it seems to work. It creates the > >> /tmp/.systemimage.0 folder and copies all files needed (including the > >> firmware tree) to it. > >> > >> I run: > >> > >> si_prepareclient --server dell01 --include-system-firmware and once > >> that's complete I copy the initrd and kernel to /tftpboot as the > >> official names that are pulled up through PXE. > >> > >> > >> > >> > >> > >> ------------------------------------------------------------------------ > >> <http://www.avast.com/> <http://www.avast.com/%3E>; > >> > >> This email is free from viruses and malware because avast! Antivirus > >> <http://www.avast.com/> <http://www.avast.com/%3E>; protection is active. > >> > >> > >> > >> > >> ------------------------------------------------------------------------------ > >> > >> > >> > >> _______________________________________________ > >> sisuite-users mailing list > >> sisuite-users@... > >>https://lists.sourceforge.net/lists/listinfo/sisuite-users > >> > > > > > > -- > > > > ---------------------------------------------- > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > sisuite-users mailing list > > sis...@li... > > https://lists.sourceforge.net/lists/listinfo/sisuite-users > > > > > -- > ---------------------------------------------- > Pierre BLONDEAU > Administrateur Systèmes & réseaux > Université de Caen > Laboratoire GREYC, Département d'informatique > > tel : 02 31 56 75 42 > bureau : Campus 2, Science 3, 406 > ---------------------------------------------- > > ------------------------------------------------------------------------------ > Want fast and easy access to all the code in your enterprise? Index and > search up to 200,000 lines of code with a free copy of Black Duck® > Code Sight™ - the same software that powers the world's largest code > search on Ohloh, the Black Duck Open Hub! Try it now. > http://p.sf.net/sfu/bds_______________________________________________ > sisuite-users mailing list > sis...@li... > https://lists.sourceforge.net/lists/listinfo/sisuite-users |