From: <an...@co...> - 2014-07-13 04:05:21
|
Thanks for the reply! I guess I'm not understanding what you meant. I have a master node (dell01) with CentOS 6.5. This is where I run SI and the UYOK script to generate the initrd/kernel files. Are you saying I should install the "official" network card driver from Broadcom on the master node, create the initrd/kernel and then try imaging on my slave node? Thanks again and you can send to my email if you like also Andy Hi, We have solve this problem by install bnx2 module from the source of broadcrom. The broadcom version works like others modules and not like a "firmware" so it's included with UYOK. Regards Le 12/07/2014 07:02, Andy a écrit : > Hi, > > I'm having issues with SI and using the UYOK feature. It seems to build > the kernel without issue but the network card can't load the firmware. > During the image loading on by slave node I get > > bnx2: Can't load firmware file "bnx2/bnx2-mips-06-6.2.3.fw > > Since it can't find that then in can't grab and IP and the rest fails. > > I'm using systemimager 4.3.0.17 > > When I create the initrd/kernel it seems to work. It creates the > /tmp/.systemimage.0 folder and copies all files needed (including the > firmware tree) to it. > > I run: > > si_prepareclient --server dell01 --include-system-firmware and once > that's complete I copy the initrd and kernel to /tftpboot as the > official names that are pulled up through PXE. > > > > > > ------------------------------------------------------------------------ > <http://www.avast.com/> <http://www.avast.com/%3E>; > > This email is free from viruses and malware because avast! Antivirus > <http://www.avast.com/> <http://www.avast.com/%3E>; protection is active. > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > sisuite-users mailing list > sisuite-users@... > https://lists.sourceforge.net/lists/listinfo/sisuite-users > -- ---------------------------------------------- |