From: Jing C. S. <sj...@cn...> - 2012-12-27 07:52:21
|
Olivier, Have you updated the line "DISK_SIZE=`LC_ALL=C parted -s $DISK0 unit MB print | egrep '$DISK0' | awk '{print $NF}' | sed 's/MB//' `" in the .master script? I found it can not work in build 4.2.0-0.91svn4568 for redhat6.3. I think it should be "DISK_SIZE=`parted -s $DISK0 unit MB print | egrep "$DISK0" | awk '{print $NF}' | sed 's/MB//' `", use "" instead of '' around $DISK0, so shell can translate it. I tested this fix, it can work. Thx. Jing LAHAYE Olivier <oli...@ce...> 2012/12/18 17:03 To Jing CDL Sun/China/IBM@IBMCN, cc "sis...@li..." <sis...@li...>, "sis...@li..." <sis...@li...> Subject RE : RE : [Sisuite-devel] New systemimager rpms for centos6 with ext4 support Jing, You're perfectly right, the ext4 problem was related to default initrd. The build did not enable the ext4 module. It's fixed in last build. Cheers, Olivier. -- Olivier LAHAYE CEA DRT/LIST/DCSI/DIR De : Jing CDL Sun [sj...@cn...] Date d'envoi : mardi 18 décembre 2012 06:35 À : LAHAYE Olivier Cc: sis...@li...; sis...@li... Objet : RE : [Sisuite-devel] New systemimager rpms for centos6 with ext4 support Thx for the reply. When I used your build with 4.2.0-0.9svn4568, I did not run into this problem, so I'm thinking maybe this is not a missing module problem? When you said 4.2.0-0.91svn4568 fixed the ext4 missing problem, did you mean the default initrd? because it seems 4.2.0-0.9svn4568 worked fine for me without the ext4 issue. Yes, I did not use the systemimager default kernel and initrd, instead, I'm using my own kernel/initrd got from my golder client, it's rhel6.3, so I think it should work fine, right? LAHAYE Olivier <oli...@ce...> 2012/12/17 17:16 To Jing CDL Sun/China/IBM@IBMCN, cc "sis...@li..." <sis...@li...>, "sis...@li..." <sis...@li...> Subject RE : [Sisuite-devel] New systemimager rpms for centos6 with ext4 support This means that your disk is not recognized. Did you use my install scripts (especially the pre-install). http://olivier.lahaye1.free.fr/RPMS/extra/si_scripts.tar.bz2 It modprobs some modules in order to see disks. I don't know my the systemimager initrd fails to automaticaly do that (did not have time to look at the problem). if you did use the script, it means that you need to modify it to have more modules inserted. Or, if your hardware is too recent (not supported by provided default kernel), then you'll need to use your own kernel for the moment. I cannot upgrade easily the kernel to 3.X as it'll require to upgrade some utils too and therefore, it'll break build on RHEL6 as well. Indeed, the build will copy missing stuffs from /lib /lib64 and other places and thoses version are for a 2.6.x kernel, not a 3.X kernel. This is also the reason why build fails on CentOS5 cas the libs copied from system misses some symbols (too old). In order to safely upgrade systemimager to latest kernel, we need to modifiy the build process so it builds everything and link everything with it's material which is not fully the case for now. (it still copy stuffs from the build system root tree (convenient ugly dirty hack)). Hope this helps, Cheers, Olivier. -- Olivier LAHAYE CEA DRT/LIST/DCSI/DIR De : Jing CDL Sun [sj...@cn...] Date d'envoi : lundi 17 décembre 2012 07:42 À : LAHAYE Olivier Cc: sis...@li...; sis...@li... Objet : Re: [Sisuite-devel] New systemimager rpms for centos6 with ext4 support Hi, I just tested these new rpms, but found the issues below, the install broken. Dec 17 14:42:36 x3550m4n02 logger: logger: parted -s -- /dev/sda mklabel gpt || shellout Dec 17 14:42:36 x3550m4n02 kernel: sda: unknown partition table Thx. Jing LAHAYE Olivier <oli...@ce...> 2012/12/13 22:47 To "sis...@li..." <sis...@li...>, cc "sis...@li..." <sis...@li...> Subject [Sisuite-devel] New systemimager rpms for centos6 with ext4 support Dear all, Here are my fixed systemimager rpms for centos-6.3 Now, the ext4 filesystem is fixed (the module was missing in the initrd image) I've tested this on recent hardware and it worked like a charm. Thoses RPMS are for testing purpose RPMS: http://olivier.lahaye1.free.fr/RPMS/noarch SRPMS: http://olivier.lahaye1.free.fr/SRPMS/systemimager-4.2.0-0.91svn4568.el6.src.rpm PS: Keep in mind that you need postinstall scripts (already posted here) to setup grub, network and other stuffs as systemconfiguratior is unable to handle latest linux technologies. Best regards, Olivier -- Olivier LAHAYE CEA DRT/LIST/DCSI/DIR ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ sisuite-devel mailing list sis...@li... https://lists.sourceforge.net/lists/listinfo/sisuite-devel |