Re: [SIP-users] Problemas com lisip.so

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Hi,

I just uploades SIP 0.9.0, which has an improved configure script.

Osvaldo, you might want to try

./configure --without-opencv

and repeat the remaining steps (make clean and make install). it should work.

Ricardo Fabbri
--
Linux registered user #175401
www.lems.brown.edu/~rfabbri
pt.wikipedia.org/wiki/IPRJ
labmacambira.sf.net

2012/6/27 Ricardo Fabbri <ric...@us...>:
> Hi Osvaldo,
>
> looking at your config.log, it seems that your OpenCV installation is OK.
>
> The problem seems to be with recent OpenCV. While I fix the issue, you
> can disable OpenCV support in SIP and get going.
>
> You should issue the following commands within SIP:
>
>   git pull
>
> (that will download the latest configure script I uploaded which
> temporarily disables OpenCV)
>
>   make clean
>   make
>   sudo make install
>
> Regards,
> Ricardo Fabbri
> --
> Linux registered user #175401
> www.lems.brown.edu/~rfabbri
> pt.wikipedia.org/wiki/IPRJ
> labmacambira.sf.net
>
>
> 2012/6/27 Osvaldo Jacques <ovj...@gm...>:
>> Tudo que quero é fazer o SIP funcionar. Se for com ou sem tanto faz.
>> Tenho que mostrar algumas aplicações com manipulação de imagens.
>> Infelizmente domino o linux o suficiente, mas segui todas recomendações dos
>> sites.
>> Já testei o OpenCV compilando os samples e funciona. Sei que o cvCvtColor é
>> uma função do OpenCV (canny).
>> Na pasta /usr/local/lib estão várias libopencv*.so. Tenho as pastas
>> /usr/local/include/opencv e /usr/local/include/opencv2 Alguma variável de
>> ambiente precisa ser setada?
>> Antes eu compilava só utilizando o libmagick. :). Meu conhecimento foi até
>> esse ponto. O bom é que estou tendo uma aula de linux. :>)
>>
>>
>> Em 27 de junho de 2012 10:03, Ricardo Fabbri
>> <ric...@us...> escreveu:
>>
>>> Ola Osvaldo,
>>>
>>> tanto o OpenCV e o Leptonica sao opcionais. Voce ainda nao me disse se
>>> voce quer o OpenCV. Eh necessario pra voce?
>>> Vou conferir seu config.log
>>>
>>> Abs,
>>> Ricardo Fabbri
>>> --
>>> Linux registered user #175401
>>> www.lems.brown.edu/~rfabbri
>>> pt.wikipedia.org/wiki/IPRJ
>>> labmacambira.sf.net
>>>
>>>
>>> 2012/6/27 Osvaldo Jacques <ovj...@gm...>:
>>> > Em anexo,
>>> > Instalei o OpenCV com SVN
>>> > Preciso também instalar o leptonica?
>>> >
>>> >
>>> > Em 26 de junho de 2012 16:07, Osvaldo Jacques <ovj...@gm...>
>>> > escreveu:
>>> >
>>> >> Hi,
>>> >> I intall OpenCV using SVN
>>> >>
>>> >>
>>> >> Em 26 de junho de 2012 17:05, Ricardo Fabbri
>>> >> <ric...@us...> escreveu:
>>> >>
>>> >>> Hi, Osvaldo,
>>> >>>
>>> >>> Do you need OpenCV support? Have you tried to install SIP without
>>> >>> OpenCV support? Does it work?
>>> >>>
>>> >>> Make sure you don't have conflicting OpenCV libs lying around the
>>> >>> system. OpenCV support currently should only work well with OpenCV
>>> >>> from SVN. Make sure SIP is not being linked to spurious OpenCV:
>>> >>>
>>> >>>  ldd
>>> >>>
>>> >>> /usr/local/share/scilab/contrib/sip-0.8.0-git/lib/libsip-0.8.0-git.so.0|grep
>>> >>> -i opencv
>>> >>>
>>> >>> (your directory may be /usr/share/scilab without the local)
>>> >>>
>>> >>> Also send me your config.log file from SIP.
>>> >>>
>>> >>> Did you perform a "git pull" in order to get the latest changes from
>>> >>> SIP? After you do that, make sure to issue a "make clean" , then
>>> >>> "make" and finally "sudo make install".
>>> >>>
>>> >>> Best,
>>> >>> Ricardo Fabbri
>>> >>> --
>>> >>> Linux registered user #175401
>>> >>> www.lems.brown.edu/~rfabbri
>>> >>> pt.wikipedia.org/wiki/IPRJ
>>> >>> labmacambira.sf.net
>>> >>>
>>> >>>
>>> >>> 2012/6/19 Osvaldo Jacques <ovj...@gm...>:
>>> >>> > Após executar o ldconfig (não conhecia esse comando)
>>> >>> > Entrei em siptoolbox
>>> >>> > Veja o screenshoot abaixo:
>>> >>> >
>>> >>> >
>>> >>> > root@jaques-System-Product-Name:/usr/share/scilab/contrib/siptoolbox/tests#
>>> >>> > makemake: Nada a ser feito para `all'.
>>> >>> >
>>> >>> >
>>> >>> > root@jaques-System-Product-Name:/usr/share/scilab/contrib/siptoolbox/tests#
>>> >>> > ./sip_link_test
>>> >>> >
>>> >>> >
>>> >>> > root@jaques-System-Product-Name:/usr/share/scilab/contrib/siptoolbox/tests#
>>> >>> > find / -iname libsip.so
>>> >>> > /usr/share/scilab/contrib/siptoolbox/src/.libs/libsip.so
>>> >>> > /usr/share/scilab/contrib/sip-0.8.0-git/lib/libsip.so
>>> >>> >
>>> >>> > Ao tentar carregar o sip dá a seguinte mensagem:
>>> >>> >
>>> >>> > Execução de iniciação:
>>> >>> >   carregando o ambiente inicial
>>> >>> >
>>> >>> >  O link falhou para a biblioteca dinâmica
>>> >>> > '/usr/share/scilab/contrib/sip-0.8.0-git/lib/libsip.so'.
>>> >>> > Um erro ocorreu:
>>> >>> > /usr/share/scilab/contrib/sip-0.8.0-git/lib/libsip.so:
>>> >>> > undefined symbol: cvCvtColor
>>> >>> >
>>> >>> > O link falhou para a biblioteca dinâmica
>>> >>> > '/usr/share/scilab/contrib/sip-0.8.0-git/lib/libsip.so'.
>>> >>> > Um erro ocorreu:
>>> >>> > /usr/share/scilab/contrib/sip-0.8.0-git/lib/libsip.so:
>>> >>> > undefined symbol: cvCvtColor
>>> >>> >
>>> >>> > addinter(libsip_path+'/libsip.so','libsip',functions);
>>> >>> >                                                       !--error 236
>>> >>> > addinter: O arquivo compartilhado não foi carregado: (null)
>>> >>> > at line      29 of exec file called by :
>>> >>> > exec (SIPDIR+'loader_include.sce');
>>> >>> > at line      58 of exec file called by :
>>> >>> > exec("/usr/share/scilab//contrib/sip-0.8.0-git/loader.sce");
>>> >>> > in  execstr instruction    called by :
>>> >>> > = gcbo; end;gcbo = getcallbackobject(8);execstr(toolboxes(1));if
>>> >>> > exists("%oldgcbo") then gcbo = %oldgcbo; else clear gcbo;
>>> >>> > while executing a callback
>>> >>> >
>>> >>> >
>>> >>> > Parece algo com essa variável cvCvtColor (o negrito é meu)
>>> >>> > Tentei ver se era problema no path dos arquivos que muitas vezes
>>> >>> > aparecem
>>> >>> > com '//' retirando isso, mas creio que não tem nada a ver.
>>> >>> >
>>> >>> > Veja o valor de lipsip_path
>>> >>> >
>>> >>> >
>>> >>> >
>>> >>> > -->libsip_path
>>> >>> >  libsip_path  =
>>> >>> >
>>> >>> >  /usr/share/scilab/contrib/sip-0.8.0-git/lib
>>> >>> >
>>> >>> >
>>> >>> >
>>> >>> >
>>> >>> > Em 18 de junho de 2012 21:23, Ricardo Fabbri
>>> >>> > <ric...@us...> escreveu:
>>> >>> >
>>> >>> >> Ola Osvaldo,
>>> >>> >>
>>> >>> >> prazer em conhece-lo e em saber que voce esta usando o SIP.
>>> >>> >>
>>> >>> >> tente rodar "ldconfig" (ou sudo ldconfig) e re-abrir o scilab e
>>> >>> >> tentar
>>> >>> >> recarregar o sip.
>>> >>> >>
>>> >>> >> Se ainda nao funcionar, me diga o que ocorre ao entrar em
>>> >>> >> siptoolbox/tests e digitar "make" e depois ./sip_link_test.
>>> >>> >>
>>> >>> >> abs,
>>> >>> >>
>>> >>> >> Ricardo Fabbri
>>> >>> >> --
>>> >>> >> Linux registered user #175401
>>> >>> >> www.lems.brown.edu/~rfabbri
>>> >>> >> pt.wikipedia.org/wiki/IPRJ
>>> >>> >> labmacambira.sf.net
>>> >>> >>
>>> >>> >>
>>> >>> >> 2012/6/18 Osvaldo Jacques <ovj...@gm...>:
>>> >>> >> > Olá Ricardo,
>>> >>> >> >
>>> >>> >> > Sou doutorando do Luciano
>>> >>> >> >
>>> >>> >> > Tentei instalar o sip no meu ubuntu precise 64 bits,
>>> >>> >> > Comentei a linha que vc recomendou em
>>> >>> >> > /usr/share/scilab/contrib/sip-0.8.0-git/macros/sip_init.sce
>>> >>> >> > //assert=assert_checktrue;
>>> >>> >> > Contudo, continua dando o seguinte erro ao tentar carregar o
>>> >>> >> > scilab
>>> >>> >> >
>>> >>> >> > "O link falhou para a biblioteca dinâmica
>>> >>> >> > '/usr/share/scilab/contrib/sip-0.8.0-git/lib/libsip.so'.
>>> >>> >> > Um erro ocorreu: libanimal-0.16.5.so.0: Não é possivel abrir
>>> >>> >> > arquivo
>>> >>> >> > de
>>> >>> >> > objetos compartilhado: Arquivo ou diretório não encontrado
>>> >>> >> > O link falhou para a biblioteca dinâmica
>>> >>> >> > '/usr/share/scilab/contrib/sip-0.8.0-git/lib/libsip.so'.
>>> >>> >> > Um erro ocorreu: libanimal-0.16.5.so.0: Não é possivel abrir
>>> >>> >> > arquivo
>>> >>> >> > de
>>> >>> >> > objetos compartilhado: Arquivo ou diretório não encontrado
>>> >>> >> > addinter(libsip_path+'/libsip.so','libsip',functions);
>>> >>> >> >                                                       !--error
>>> >>> >> > 236
>>> >>> >> > addinter: O arquivo compartilhado não foi carregado: (null)
>>> >>> >> > at line      29 of exec file called by :
>>> >>> >> > exec (SIPDIR+'loader_include.sce');
>>> >>> >> > at line      58 of exec file called by :
>>> >>> >> > exec("/usr/share/scilab//contrib/sip-0.8.0-git/loader.sce");
>>> >>> >> > in  execstr instruction    called by :
>>> >>> >> > if exists("gcbo") then %oldgcbo = gcbo; end;gcbo =
>>> >>> >> > getcallbackobject(8);execstr(toolboxes(1));if exists("%oldgcbo")
>>> >>> >> > then
>>> >>> >> > gcbo =
>>> >>> >> > %oldgcbo; else clear gcbo; end;
>>> >>> >> > while executing a callback"
>>> >>> >> >
>>> >>> >> >
>>> >>> >> > Parece que o erro é na lib animal. O que sugere?
>>> >>> >> > --
>>> >>> >> > Osvaldo Vargas Jaques
>>> >>> >> > Instituto de Fisica de São Carlos - IFSC/USP
>>> >>> >> > Grupo de Computação Interdisciplinar
>>> >>> >> > Av. Trabalhador São-carlense, 400
>>> >>> >> > Cx.P 369, 13560-970 - São Carlos - SP
>>> >>> >> >
>>> >>> >> >
>>> >>> >> >
>>> >>> >> >
>>> >>> >> > ------------------------------------------------------------------------------
>>> >>> >> > Live Security Virtual Conference
>>> >>> >> > Exclusive live event will cover all the ways today's security and
>>> >>> >> > threat landscape has changed and how IT managers can respond.
>>> >>> >> > Discussions
>>> >>> >> > will include endpoint security, mobile security and the latest in
>>> >>> >> > malware
>>> >>> >> > threats.
>>> >>> >> > http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
>>> >>> >> > _______________________________________________
>>> >>> >> > SIPtoolbox-users mailing list
>>> >>> >> > SIP...@li...
>>> >>> >> > https://lists.sourceforge.net/lists/listinfo/siptoolbox-users
>>> >>> >> >
>>> >>> >
>>> >>> >
>>> >>> >
>>> >>> >
>>> >>> > --
>>> >>> > Osvaldo Vargas Jaques
>>> >>> > Instituto de Fisica de São Carlos - IFSC/USP
>>> >>> > Grupo de Computação Interdisciplinar
>>> >>> > Av. Trabalhador São-carlense, 400
>>> >>> > Cx.P 369, 13560-970 - São Carlos - SP
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> Osvaldo Vargas Jaques
>>> >> Ciência da Computação
>>> >> Universidade Estadual de Mato Grosso do Sul - UEMS
>>> >> Cidade Universitária
>>> >> Dourados-MS
>>> >>
>>> >> Instituto de Fisica de São Carlos - IFSC/USP
>>> >> Grupo de Computação Interdisciplinar
>>> >> Av. Trabalhador São-carlense, 400
>>> >> Cx.P 369, 13560-970 - São Carlos - SP
>>> >
>>> >
>>> >
>>> >
>>> > --
>>> > Osvaldo Vargas Jaques
>>> > Ciência da Computação
>>> > Universidade Estadual de Mato Grosso do Sul - UEMS
>>> > Cidade Universitária
>>> > Dourados-MS
>>> > Instituto de Fisica de São Carlos - IFSC/USP
>>> > Grupo de Computação Interdisciplinar
>>> > Av. Trabalhador São-carlense, 400
>>> > Cx.P 369, 13560-970 - São Carlos - SP
>>
>>
>>
>>
>> --
>> Osvaldo Vargas Jaques
>> Ciência da Computação
>> Universidade Estadual de Mato Grosso do Sul - UEMS
>> Cidade Universitária
>> Dourados-MS
>> Instituto de Fisica de São Carlos - IFSC/USP
>> Grupo de Computação Interdisciplinar
>> Av. Trabalhador São-carlense, 400
>> Cx.P 369, 13560-970 - São Carlos - SP

Re: [SIP-users] Problemas com lisip.so

Advanced image processing toolbox for Scilab on Unix/Linux/Mac OS

Re: [SIP-users] Problemas com lisip.so