[Simplemail-cvs] simplemail/tests/dovecot-conf dovecot-dict-auth.conf.ext, NONE, 1.1 dovecot-dict-sql.conf.ext, NONE, 1.1 dovecot-ldap.conf.ext, NONE, 1.1 dovecot-sql.conf.ext, NONE, 1.1 dovecot.conf, NONE, 1.1

[Sebastian B. <sb...@us...>]

Update of /cvsroot/simplemail/simplemail/tests/dovecot-conf
In directory sfp-cvs-1.v30.ch3.sourceforge.com:/tmp/cvs-serv29795/tests/dovecot-conf

Added Files:
	dovecot-dict-auth.conf.ext dovecot-dict-sql.conf.ext 
	dovecot-ldap.conf.ext dovecot-sql.conf.ext dovecot.conf 
Log Message:
Added initial dovecot config.


--- NEW FILE: dovecot.conf ---
## Dovecot configuration file

# If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration

# "doveconf -n" command gives a clean output of the changed settings. Use it
# instead of copy&pasting files when posting to the Dovecot mailing list.

# '#' character and everything after it is treated as comments. Extra spaces
# and tabs are ignored. If you want to use either of these explicitly, put the
# value inside quotes, eg.: key = "# char and trailing whitespace  "

# Most (but not all) settings can be overridden by different protocols and/or
# source/destination IPs by placing the settings inside sections, for example:
# protocol imap { }, local 127.0.0.1 { }, remote 10.0.0.0/8 { }

# Default values are shown for each setting, it's not required to uncomment
# those. These are exceptions to this though: No sections (e.g. namespace {})
# or plugin settings are added by default, they're listed only as examples.
# Paths are also just examples with the real defaults being based on configure
# options. The paths listed here are for configure --prefix=/usr
# --sysconfdir=/etc --localstatedir=/var

# Protocols we want to be serving.
#protocols = imap pop3 lmtp

# A comma separated list of IPs or hosts where to listen in for connections. 
# "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces.
# If you want to specify non-default ports or anything more complex,
# edit conf.d/master.conf.
#listen = *, ::

# Base directory where to store runtime data.
#base_dir = /var/run/dovecot/

# Name of this instance. In multi-instance setup doveadm and other commands
# can use -i <instance_name> to select which instance is used (an alternative
# to -c <config_path>). The instance name is also added to Dovecot processes
# in ps output.
#instance_name = dovecot

# Greeting message for clients.
#login_greeting = Dovecot ready.

# Space separated list of trusted network ranges. Connections from these
# IPs are allowed to override their IP addresses and ports (for logging and
# for authentication checks). disable_plaintext_auth is also ignored for
# these networks. Typically you'd specify your IMAP proxy servers here.
#login_trusted_networks =

# Space separated list of login access check sockets (e.g. tcpwrap)
#login_access_sockets = 

# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do
# proxying. This isn't necessary normally, but may be useful if the destination
# IP is e.g. a load balancer's IP.
#auth_proxy_self =

# Show more verbose process titles (in ps). Currently shows user name and
# IP address. Useful for seeing who are actually using the IMAP processes
# (eg. shared mailboxes or if same uid is used for multiple accounts).
#verbose_proctitle = no

# Should all processes be killed when Dovecot master process shuts down.
# Setting this to "no" means that Dovecot can be upgraded without
# forcing existing client connections to close (although that could also be
# a problem if the upgrade is e.g. because of a security fix).
#shutdown_clients = yes

# If non-zero, run mail commands via this many connections to doveadm server,
# instead of running them directly in the same process.
#doveadm_worker_count = 0
# UNIX socket or host:port used for connecting to doveadm server
#doveadm_socket_path = doveadm-server

# Space separated list of environment variables that are preserved on Dovecot
# startup and passed down to all of its child processes. You can also give
# key=value pairs to always set specific settings.
#import_environment = TZ

##
## Dictionary server settings
##

# Dictionary can be used to store key=value lists. This is used by several
# plugins. The dictionary can be accessed either directly or though a
# dictionary server. The following dict block maps dictionary names to URIs
# when the server is used. These can then be referenced using URIs in format
# "proxy::<name>".

dict {
  #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext
  #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext
}

# Most of the actual configuration gets included below. The filenames are
# first sorted by their ASCII value and parsed in that order. The 00-prefixes
# in filenames are intended to make it easier to understand the ordering.
!include conf.d/*.conf

# A config file can also tried to be included without giving an error if
# it's not found:
!include_try local.conf

--- NEW FILE: dovecot-dict-sql.conf.ext ---
# This file is commonly accessed via dict {} section in dovecot.conf

#connect = host=localhost dbname=mails user=testuser password=pass

# CREATE TABLE quota (
#   username varchar(100) not null,
#   bytes bigint not null default 0,
#   messages integer not null default 0,
#   primary key (username)
# );

map {
  pattern = priv/quota/storage
  table = quota
  username_field = username
  value_field = bytes
}
map {
  pattern = priv/quota/messages
  table = quota
  username_field = username
  value_field = messages
}

# CREATE TABLE expires (
#   username varchar(100) not null,
#   mailbox varchar(255) not null,
#   expire_stamp integer not null,
#   primary key (username, mailbox)
# );

map {
  pattern = shared/expire/$user/$mailbox
  table = expires
  value_field = expire_stamp

  fields {
    username = $user
    mailbox = $mailbox
  }
}

--- NEW FILE: dovecot-sql.conf.ext ---
# This file is commonly accessed via passdb {} or userdb {} section in
# conf.d/auth-sql.conf.ext

# This file is opened as root, so it should be owned by root and mode 0600.
#
# http://wiki2.dovecot.org/AuthDatabase/SQL
#
# For the sql passdb module, you'll need a database with a table that
# contains fields for at least the username and password. If you want to
# use the user@domain syntax, you might want to have a separate domain
# field as well.
#
# If your users all have the same uig/gid, and have predictable home
# directories, you can use the static userdb module to generate the home
# dir based on the username and domain. In this case, you won't need fields
# for home, uid, or gid in the database.
#
# If you prefer to use the sql userdb module, you'll want to add fields
# for home, uid, and gid. Here is an example table:
#
# CREATE TABLE users (
#     username VARCHAR(128) NOT NULL,
#     domain VARCHAR(128) NOT NULL,
#     password VARCHAR(64) NOT NULL,
#     home VARCHAR(255) NOT NULL,
#     uid INTEGER NOT NULL,
#     gid INTEGER NOT NULL,
#     active CHAR(1) DEFAULT 'Y' NOT NULL
# );

# Database driver: mysql, pgsql, sqlite
#driver = 

# Database connection string. This is driver-specific setting.
#
# HA / round-robin load-balancing is supported by giving multiple host
# settings, like: host=sql1.host.org host=sql2.host.org
#
# pgsql:
#   For available options, see the PostgreSQL documention for the
#   PQconnectdb function of libpq.
#   Use maxconns=n (default 5) to change how many connections Dovecot can
#   create to pgsql.
#
# mysql:
#   Basic options emulate PostgreSQL option names:
#     host, port, user, password, dbname
#
#   But also adds some new settings:
#     client_flags        - See MySQL manual
#     ssl_ca, ssl_ca_path - Set either one or both to enable SSL
#     ssl_cert, ssl_key   - For sending client-side certificates to server
#     ssl_cipher          - Set minimum allowed cipher security (default: HIGH)
#     option_file         - Read options from the given file instead of
#                           the default my.cnf location
#     option_group        - Read options from the given group (default: client)
# 
#   You can connect to UNIX sockets by using host: host=/var/run/mysql.sock
#   Note that currently you can't use spaces in parameters.
#
# sqlite:
#   The path to the database file.
#
# Examples:
#   connect = host=192.168.1.1 dbname=users
#   connect = host=sql.example.com dbname=virtual user=virtual password=blarg
#   connect = /etc/dovecot/authdb.sqlite
#
#connect =

# Default password scheme.
#
# List of supported schemes is in
# http://wiki2.dovecot.org/Authentication/PasswordSchemes
#
#default_pass_scheme = MD5

# passdb query to retrieve the password. It can return fields:
#   password - The user's password. This field must be returned.
#   user - user@domain from the database. Needed with case-insensitive lookups.
#   username and domain - An alternative way to represent the "user" field.
#
# The "user" field is often necessary with case-insensitive lookups to avoid
# e.g. "name" and "nAme" logins creating two different mail directories. If
# your user and domain names are in separate fields, you can return "username"
# and "domain" fields instead of "user".
#
# The query can also return other fields which have a special meaning, see
# http://wiki2.dovecot.org/PasswordDatabase/ExtraFields
#
# Commonly used available substitutions (see http://wiki2.dovecot.org/Variables
# for full list):
#   %u = entire user@domain
#   %n = user part of user@domain
#   %d = domain part of user@domain
# 
# Note that these can be used only as input to SQL query. If the query outputs
# any of these substitutions, they're not touched. Otherwise it would be
# difficult to have eg. usernames containing '%' characters.
#
# Example:
#   password_query = SELECT userid AS user, pw AS password \
#     FROM users WHERE userid = '%u' AND active = 'Y'
#
#password_query = \
#  SELECT username, domain, password \
#  FROM users WHERE username = '%n' AND domain = '%d'

# userdb query to retrieve the user information. It can return fields:
#   uid - System UID (overrides mail_uid setting)
#   gid - System GID (overrides mail_gid setting)
#   home - Home directory
#   mail - Mail location (overrides mail_location setting)
#
# None of these are strictly required. If you use a single UID and GID, and
# home or mail directory fits to a template string, you could use userdb static
# instead. For a list of all fields that can be returned, see
# http://wiki2.dovecot.org/UserDatabase/ExtraFields
#
# Examples:
#   user_query = SELECT home, uid, gid FROM users WHERE userid = '%u'
#   user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%u'
#   user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%u'
#
#user_query = \
#  SELECT home, uid, gid \
#  FROM users WHERE username = '%n' AND domain = '%d'

# If you wish to avoid two SQL lookups (passdb + userdb), you can use
# userdb prefetch instead of userdb sql in dovecot.conf. In that case you'll
# also have to return userdb fields in password_query prefixed with "userdb_"
# string. For example:
#password_query = \
#  SELECT userid AS user, password, \
#    home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \
#  FROM users WHERE userid = '%u'

# Query to get a list of all usernames.
#iterate_query = SELECT username AS user FROM users

--- NEW FILE: dovecot-ldap.conf.ext ---
# This file is commonly accessed via passdb {} or userdb {} section in
# conf.d/auth-ldap.conf.ext

# This file is opened as root, so it should be owned by root and mode 0600.
#
# http://wiki2.dovecot.org/AuthDatabase/LDAP
#
# NOTE: If you're not using authentication binds, you'll need to give
# dovecot-auth read access to userPassword field in the LDAP server.
# With OpenLDAP this is done by modifying /etc/ldap/slapd.conf. There should
# already be something like this:

# access to attribute=userPassword
#        by dn="<dovecot's dn>" read # add this
#        by anonymous auth
#        by self write
#        by * none

# Space separated list of LDAP hosts to use. host:port is allowed too.
#hosts =

# LDAP URIs to use. You can use this instead of hosts list. Note that this
# setting isn't supported by all LDAP libraries.
#uris = 

# Distinguished Name - the username used to login to the LDAP server.
# Leave it commented out to bind anonymously (useful with auth_bind=yes).
#dn = 

# Password for LDAP server, if dn is specified.
#dnpass = 

# Use SASL binding instead of the simple binding. Note that this changes
# ldap_version automatically to be 3 if it's lower. Also note that SASL binds
# and auth_bind=yes don't work together.
#sasl_bind = no
# SASL mechanism name to use.
#sasl_mech =
# SASL realm to use.
#sasl_realm =
# SASL authorization ID, ie. the dnpass is for this "master user", but the
# dn is still the logged in user. Normally you want to keep this empty.
#sasl_authz_id =

# Use TLS to connect to the LDAP server.
#tls = no
# TLS options, currently supported only with OpenLDAP:
#tls_ca_cert_file =
#tls_ca_cert_dir =
#tls_cipher_suite =
# TLS cert/key is used only if LDAP server requires a client certificate.
#tls_cert_file =
#tls_key_file =
# Valid values: never, hard, demand, allow, try
#tls_require_cert =

# Use the given ldaprc path.
#ldaprc_path =

# LDAP library debug level as specified by LDAP_DEBUG_* in ldap_log.h.
# -1 = everything. You may need to recompile OpenLDAP with debugging enabled
# to get enough output.
#debug_level = 0

# Use authentication binding for verifying password's validity. This works by
# logging into LDAP server using the username and password given by client.
# The pass_filter is used to find the DN for the user. Note that the pass_attrs
# is still used, only the password field is ignored in it. Before doing any
# search, the binding is switched back to the default DN.
#auth_bind = no

# If authentication binding is used, you can save one LDAP request per login
# if users' DN can be specified with a common template. The template can use
# the standard %variables (see user_filter). Note that you can't
# use any pass_attrs if you use this setting.
#
# If you use this setting, it's a good idea to use a different
# dovecot-ldap.conf.ext for userdb (it can even be a symlink, just as long as
# the filename is different in userdb's args). That way one connection is used
# only for LDAP binds and another connection is used for user lookups.
# Otherwise the binding is changed to the default DN before each user lookup.
#
# For example:
#   auth_bind_userdn = cn=%u,ou=people,o=org
#
#auth_bind_userdn =

# LDAP protocol version to use. Likely 2 or 3.
#ldap_version = 3

# LDAP base. %variables can be used here.
# For example: dc=mail, dc=example, dc=org
base =

# Dereference: never, searching, finding, always
#deref = never

# Search scope: base, onelevel, subtree
#scope = subtree

# User attributes are given in LDAP-name=dovecot-internal-name list. The
# internal names are:
#   uid - System UID
#   gid - System GID
#   home - Home directory
#   mail - Mail location
#
# There are also other special fields which can be returned, see
# http://wiki2.dovecot.org/UserDatabase/ExtraFields
#user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid

# Filter for user lookup. Some variables can be used (see
# http://wiki2.dovecot.org/Variables for full list):
#   %u - username
#   %n - user part in user@domain, same as %u if there's no domain
#   %d - domain part in user@domain, empty if user there's no domain
#user_filter = (&(objectClass=posixAccount)(uid=%u))

# Password checking attributes:
#  user: Virtual user name (user@domain), if you wish to change the
#        user-given username to something else
#  password: Password, may optionally start with {type}, eg. {crypt}
# There are also other special fields which can be returned, see
# http://wiki2.dovecot.org/PasswordDatabase/ExtraFields
#pass_attrs = uid=user,userPassword=password

# If you wish to avoid two LDAP lookups (passdb + userdb), you can use
# userdb prefetch instead of userdb ldap in dovecot.conf. In that case you'll
# also have to include user_attrs in pass_attrs field prefixed with "userdb_"
# string. For example:
#pass_attrs = uid=user,userPassword=password,\
#  homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid

# Filter for password lookups
#pass_filter = (&(objectClass=posixAccount)(uid=%u))

# Attributes and filter to get a list of all users
#iterate_attrs = uid=user
#iterate_filter = (objectClass=posixAccount)

# Default password scheme. "{scheme}" before password overrides this.
# List of supported schemes is in: http://wiki2.dovecot.org/Authentication
#default_pass_scheme = CRYPT

--- NEW FILE: dovecot-dict-auth.conf.ext ---
# This file is commonly accessed via dict {} section in dovecot.conf

# Dictionary URI
#uri = 

# Key for passdb lookups
password_key = dovecot/passdb/%u

# Key for userdb lookups
user_key = dovecot/userdb/%u

# How to parse the value for key=value pairs. Currently we support only JSON
# format with { "key": "value", ... } object.
#value_format = json

# Username iteration prefix. Keys under this are assumed to contain usernames.
iterate_prefix = dovecot/userdb/

# Should iteration be disabled for this userdb? If this userdb acts only as a
# cache there's no reason to try to iterate the (partial & duplicate) users.
#iterate_disable = no

# Default password scheme
default_pass_scheme = MD5