I have tried the B2 program, which it seems you have fixed the error before I could try your suggestion to manually edit the ini file. Great work! And thank you very much.
Just another request, after doing a refresh only preferred DNS server is shown in [Current Information] area. Would it be possible to have the alternative server shown too?
Thanks.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
In case where PC is cloned or newly imaged, the NIC drivers may not be setup on the first boot or two. There should be some sanity checking done by Simple IP config to see if the NIC is ok before 'doing stuff' to prevent Simple IP Config from crashing on Windows boot.
Not sure what the case is when NIC is installed, but intentionally disabled and Simple IP Config is started, it may crash as well, or it may not. But should be checked.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello good people, I hope I'm in the right place for the Simple IP Config software. I downloaded the software, but it's lacking something...I need some form of info to get working. We have five computers/laptops, and in a serous need for individual IP Addresses. Did I download the correct software, and if I did....Do I need a password or key to enable it? Please let me know. Thank you.
L.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello Kurtis,
This Topic was created as per your suggestion which diverts the continued discussion from link below:
https://sourceforge.net/p/simpleipconfig/discussion/support/thread/00c4e992/
I have tried the B2 program, which it seems you have fixed the error before I could try your suggestion to manually edit the ini file. Great work! And thank you very much.
Just another request, after doing a refresh only preferred DNS server is shown in [Current Information] area. Would it be possible to have the alternative server shown too?
Thanks.
The DNS servers have been added to the current information box in version 2.3 Beta 3. I hope this helps.
View and moderate all "Support" comments posted by this user
Mark all as spam, and block user from posting to "Discussion"
Hi Kurtis,
Long time we haven't seen a beta. Any new version supposed to be released soon?
regards,
Xanadu
View and moderate all "Support" comments posted by this user
Mark all as spam, and block user from posting to "Discussion"
In case where PC is cloned or newly imaged, the NIC drivers may not be setup on the first boot or two. There should be some sanity checking done by Simple IP config to see if the NIC is ok before 'doing stuff' to prevent Simple IP Config from crashing on Windows boot.
Not sure what the case is when NIC is installed, but intentionally disabled and Simple IP Config is started, it may crash as well, or it may not. But should be checked.
View and moderate all "Support" comments posted by this user
Mark all as spam, and block user from posting to "Discussion"
No activity for a long time?
Hello good people, I hope I'm in the right place for the Simple IP Config software. I downloaded the software, but it's lacking something...I need some form of info to get working. We have five computers/laptops, and in a serous need for individual IP Addresses. Did I download the correct software, and if I did....Do I need a password or key to enable it? Please let me know. Thank you.
L.