Would it be possible to have multiple ip address/mask in a defined set. For example I might visit a site where I require the same physical LAN adapter to sit on 2 or more ip addresses for accessing different resources (not a typical scenario) for management purposes.
Typically that might be 3 different subnets on the same LAN. 192.168.1.1/24 192.168.2.1/24 and 192.168.3.1? I have my laptop site on 2 different subnets at home with one for normal stuff and the other in the 192.168.1.x/24 range so I can just plug other network kit in to configure without it interfering with other equipment in place (typically 192.168.1.x is an out of the box range).
Of course only a single gateway and set of dns entries would be required. Doing this sort of thing manually is really a PITA :-)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
It would be nice if you could sort the profiles by name. I have several, and the scroll off the bottom of the screen. Sorting by name would help to keep track of them.
Currently, I open the profile.ini file and sort them manually.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
How do you add a new profile to an adapter? I can rename the existing,delete or reorder. However, no way to add a new one if I have deleted all the existing profiles
Last edit: Anonymous 2015-05-07
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
View and moderate all "Suggestions" comments posted by this user
Mark all as spam, and block user from posting to "Discussion"
Would it be possible to have multiple ip address/mask in a defined set. For example I might visit a site where I require the same physical LAN adapter to sit on 2 or more ip addresses for accessing different resources (not a typical scenario) for management purposes.
Typically that might be 3 different subnets on the same LAN. 192.168.1.1/24 192.168.2.1/24 and 192.168.3.1? I have my laptop site on 2 different subnets at home with one for normal stuff and the other in the 192.168.1.x/24 range so I can just plug other network kit in to configure without it interfering with other equipment in place (typically 192.168.1.x is an out of the box range).
Of course only a single gateway and set of dns entries would be required. Doing this sort of thing manually is really a PITA :-)
View and moderate all "Suggestions" comments posted by this user
Mark all as spam, and block user from posting to "Discussion"
Must check other posts first. Must check other posts first...
This request exists at http://sourceforge.net/p/simpleipconfig/discussion/suggestions/thread/be1809d2/
View and moderate all "Suggestions" comments posted by this user
Mark all as spam, and block user from posting to "Discussion"
It would be nice if you could sort the profiles by name. I have several, and the scroll off the bottom of the screen. Sorting by name would help to keep track of them.
Currently, I open the profile.ini file and sort them manually.
This feature has been added to beta 3 - Download
You can find it by right-clicking any profile and choosing your desired sort option.
Thanks for the suggestion!
Last edit: Kurtis Liggett 2014-10-21
View and moderate all "Suggestions" comments posted by this user
Mark all as spam, and block user from posting to "Discussion"
How do you add a new profile to an adapter? I can rename the existing,delete or reorder. However, no way to add a new one if I have deleted all the existing profiles
Last edit: Anonymous 2015-05-07
You can click the "Save As" button to create a new profile.
Maybe adding a "New" button would be more intuitive...